[PATCH net-next v4 0/2] e1000e: add XDP support

[PATCH net-next v4 0/2] e1000e: add XDP support

[Matteo Croce]

Add XDP support to e1000e driver. First patch adds basic XDP support,
while the second one adds support for AF_XDP.
Tested on an Intel 82574L Gigabit card with xdp-bench and xdp-trafficgen

v2: added a missing 'select PAGE_POOL' which triggered a build failure
with some configurations.
v3: removed a leftover file.
v4: bugfixes

Matteo Croce (2):
  e1000e: add basic XDP support
  e1000e: add XDP_REDIRECT support

 drivers/net/ethernet/intel/Kconfig         |   1 +
 drivers/net/ethernet/intel/e1000e/e1000.h  |  18 +-
 drivers/net/ethernet/intel/e1000e/netdev.c | 610 ++++++++++++++++++++-
 3 files changed, 617 insertions(+), 12 deletions(-)

-- 
2.53.0

[PATCH net-next v4 1/2] e1000e: add basic XDP support

[Matteo Croce]

Add XDP support to the e1000e driver covering the actions defined by
NETDEV_XDP_ACT_BASIC: XDP_DROP, XDP_PASS, XDP_TX and XDP_ABORTED.

Infrastructure:
- e1000_xdp_setup() / e1000_xdp() for program attach/detach with
  MTU validation and close/open cycle
- ndo_bpf support in net_device_ops
- xdp_rxq_info registration in setup/free_rx_resources

Receive path:
- e1000_alloc_rx_buffers_xdp() for page-based Rx buffer allocation
  with XDP_PACKET_HEADROOM
- e1000_clean_rx_irq_xdp() as the XDP receive handler
- e1000_run_xdp() to execute the XDP program on received packets
- SKB building via napi_build_skb() for XDP_PASS with metadata,
  checksum offload and RSS hash support

Transmit path:
- e1000_xdp_xmit_ring() to DMA-map and enqueue an XDP frame
- e1000_xdp_xmit_back() to convert an xdp_buff to a frame and send it
- e1000_finalize_xdp() to flush the TX ring after XDP processing
- TX completion via xdp_return_frame() with buffer type tracking

Assisted-by: claude-opus-4-6
Signed-off-by: Matteo Croce <teknoraver@meta.com>
---
 drivers/net/ethernet/intel/Kconfig         |   1 +
 drivers/net/ethernet/intel/e1000e/e1000.h  |  18 +-
 drivers/net/ethernet/intel/e1000e/netdev.c | 533 ++++++++++++++++++++-
 3 files changed, 540 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 288fa8ce53af..46e37cb68e70 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -63,6 +63,7 @@ config E1000E
 	depends on PCI && (!SPARC32 || BROKEN)
 	depends on PTP_1588_CLOCK_OPTIONAL
 	select CRC32
+	select PAGE_POOL
 	help
 	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
 	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 63ebe00376f5..4c1175d4e5cb 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -19,10 +19,13 @@
 #include <linux/net_tstamp.h>
 #include <linux/ptp_clock_kernel.h>
 #include <linux/ptp_classify.h>
+#include <linux/bpf.h>
 #include <linux/mii.h>
 #include <linux/mdio.h>
 #include <linux/mutex.h>
 #include <linux/pm_qos.h>
+#include <net/page_pool/helpers.h>
+#include <net/xdp.h>
 #include "hw.h"
 
 struct e1000_info;
@@ -126,12 +129,21 @@ struct e1000_ps_page {
 	u64 dma; /* must be u64 - written to hw */
 };
 
+enum e1000_tx_buf_type {
+	E1000_TX_BUF_SKB = 0,
+	E1000_TX_BUF_XDP,
+};
+
 /* wrappers around a pointer to a socket buffer,
  * so a DMA handle can be stored along with the buffer
  */
 struct e1000_buffer {
 	dma_addr_t dma;
-	struct sk_buff *skb;
+	union {
+		struct sk_buff *skb;
+		struct xdp_frame *xdpf;
+	};
+	enum e1000_tx_buf_type type;
 	union {
 		/* Tx */
 		struct {
@@ -259,6 +271,10 @@ struct e1000_adapter {
 			     gfp_t gfp);
 	struct e1000_ring *rx_ring;
 
+	struct bpf_prog *xdp_prog;
+	struct xdp_rxq_info xdp_rxq;
+	struct page_pool *page_pool;
+
 	u32 rx_int_delay;
 	u32 rx_abs_int_delay;
 
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 9befdacd6730..d77f208f00cc 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -25,6 +25,10 @@
 #include <linux/pm_runtime.h>
 #include <linux/prefetch.h>
 #include <linux/suspend.h>
+#include <linux/bpf.h>
+#include <linux/bpf_trace.h>
+#include <net/page_pool/helpers.h>
+#include <net/xdp.h>
 
 #include "e1000.h"
 #define CREATE_TRACE_POINTS
@@ -33,6 +37,11 @@
 char e1000e_driver_name[] = "e1000e";
 
 #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
+
+#define E1000_XDP_PASS		0
+#define E1000_XDP_CONSUMED	BIT(0)
+#define E1000_XDP_TX		BIT(1)
+
 static int debug = -1;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
@@ -708,6 +717,370 @@ static void e1000_alloc_rx_buffers(struct e1000_ring *rx_ring,
 	rx_ring->next_to_use = i;
 }
 
+static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss,
+				 struct sk_buff *skb)
+{
+	if (netdev->features & NETIF_F_RXHASH)
+		skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3);
+}
+
+/**
+ * e1000_xdp_xmit_ring - transmit an XDP frame on the TX ring
+ * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring
+ * @xdpf: XDP frame to transmit
+ *
+ * Returns E1000_XDP_TX on success, E1000_XDP_CONSUMED on failure
+ **/
+static int e1000_xdp_xmit_ring(struct e1000_adapter *adapter,
+			       struct e1000_ring *tx_ring,
+			       struct xdp_frame *xdpf)
+{
+	struct e1000_buffer *buffer_info;
+	struct e1000_tx_desc *tx_desc;
+	dma_addr_t dma;
+	u16 i;
+
+	if (e1000_desc_unused(tx_ring) < 1)
+		return E1000_XDP_CONSUMED;
+
+	i = tx_ring->next_to_use;
+	buffer_info = &tx_ring->buffer_info[i];
+
+	dma = dma_map_single(&adapter->pdev->dev, xdpf->data, xdpf->len,
+			     DMA_TO_DEVICE);
+	if (dma_mapping_error(&adapter->pdev->dev, dma))
+		return E1000_XDP_CONSUMED;
+
+	buffer_info->xdpf = xdpf;
+	buffer_info->type = E1000_TX_BUF_XDP;
+	buffer_info->dma = dma;
+	buffer_info->length = xdpf->len;
+	buffer_info->time_stamp = jiffies;
+	buffer_info->next_to_watch = i;
+	buffer_info->segs = 1;
+	buffer_info->bytecount = xdpf->len;
+	buffer_info->mapped_as_page = 0;
+
+	tx_desc = E1000_TX_DESC(*tx_ring, i);
+	tx_desc->buffer_addr = cpu_to_le64(dma);
+	tx_desc->lower.data = cpu_to_le32(adapter->txd_cmd |
+					   E1000_TXD_CMD_IFCS |
+					   xdpf->len);
+	tx_desc->upper.data = 0;
+
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+	tx_ring->next_to_use = i;
+
+	return E1000_XDP_TX;
+}
+
+/**
+ * e1000_xdp_xmit_back - transmit an XDP buffer back on the same device
+ * @adapter: board private structure
+ * @xdp: XDP buffer to transmit
+ *
+ * Returns E1000_XDP_TX on success, E1000_XDP_CONSUMED on failure
+ **/
+static int e1000_xdp_xmit_back(struct e1000_adapter *adapter,
+			       struct xdp_buff *xdp)
+{
+	struct xdp_frame *xdpf = xdp_convert_buff_to_frame(xdp);
+
+	if (unlikely(!xdpf))
+		return E1000_XDP_CONSUMED;
+
+	return e1000_xdp_xmit_ring(adapter, adapter->tx_ring, xdpf);
+}
+
+/**
+ * e1000_finalize_xdp - flush XDP operations after NAPI Rx loop
+ * @adapter: board private structure
+ * @xdp_xmit: bitmask of XDP actions taken during Rx processing
+ **/
+static void e1000_finalize_xdp(struct e1000_adapter *adapter,
+			       unsigned int xdp_xmit)
+{
+	struct e1000_ring *tx_ring = adapter->tx_ring;
+
+	if (xdp_xmit & E1000_XDP_TX) {
+		/* Force memory writes to complete before letting h/w
+		 * know there are new descriptors to fetch.
+		 */
+		wmb();
+		if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+			e1000e_update_tdt_wa(tx_ring,
+					     tx_ring->next_to_use);
+		else
+			writel(tx_ring->next_to_use, tx_ring->tail);
+	}
+}
+
+/**
+ * e1000_run_xdp - run an XDP program on a received packet
+ * @adapter: board private structure
+ * @xdp: XDP buffer containing packet data
+ *
+ * Returns E1000_XDP_PASS, E1000_XDP_TX, or E1000_XDP_CONSUMED
+ **/
+static int e1000_run_xdp(struct e1000_adapter *adapter, struct xdp_buff *xdp)
+{
+	struct bpf_prog *xdp_prog = READ_ONCE(adapter->xdp_prog);
+	struct net_device *netdev = adapter->netdev;
+	int result = E1000_XDP_PASS;
+	u32 act;
+
+	if (!xdp_prog)
+		return E1000_XDP_PASS;
+
+	prefetchw(xdp->data_hard_start);
+
+	act = bpf_prog_run_xdp(xdp_prog, xdp);
+	switch (act) {
+	case XDP_PASS:
+		break;
+	case XDP_TX:
+		result = e1000_xdp_xmit_back(adapter, xdp);
+		if (result == E1000_XDP_CONSUMED)
+			goto out_failure;
+		break;
+	default:
+		bpf_warn_invalid_xdp_action(netdev, xdp_prog, act);
+		fallthrough;
+	case XDP_ABORTED:
+out_failure:
+		trace_xdp_exception(netdev, xdp_prog, act);
+		fallthrough;
+	case XDP_DROP:
+		result = E1000_XDP_CONSUMED;
+		break;
+	}
+
+	return result;
+}
+
+/**
+ * e1000_alloc_rx_buffers_xdp - Replace used receive buffers for XDP
+ * @rx_ring: Rx descriptor ring
+ * @cleaned_count: number to reallocate
+ * @gfp: flags for allocation
+ *
+ * Allocates page-based Rx buffers with XDP_PACKET_HEADROOM headroom.
+ **/
+static void e1000_alloc_rx_buffers_xdp(struct e1000_ring *rx_ring,
+				       int cleaned_count, gfp_t gfp)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	union e1000_rx_desc_extended *rx_desc;
+	struct e1000_buffer *buffer_info;
+	unsigned int i;
+
+	i = rx_ring->next_to_use;
+	buffer_info = &rx_ring->buffer_info[i];
+
+	while (cleaned_count--) {
+		if (!buffer_info->page) {
+			buffer_info->page = page_pool_alloc_pages(adapter->page_pool,
+								  gfp);
+			if (!buffer_info->page) {
+				adapter->alloc_rx_buff_failed++;
+				break;
+			}
+		}
+
+		if (!buffer_info->dma) {
+			buffer_info->dma = page_pool_get_dma_addr(buffer_info->page) +
+					   XDP_PACKET_HEADROOM;
+		}
+
+		rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+		rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
+
+		if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
+			/* Force memory writes to complete before letting
+			 * h/w know there are new descriptors to fetch.
+			 */
+			wmb();
+			if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+				e1000e_update_rdt_wa(rx_ring, i);
+			else
+				writel(i, rx_ring->tail);
+		}
+		i++;
+		if (i == rx_ring->count)
+			i = 0;
+		buffer_info = &rx_ring->buffer_info[i];
+	}
+
+	rx_ring->next_to_use = i;
+}
+
+/**
+ * e1000_clean_rx_irq_xdp - Receive with XDP processing
+ * @rx_ring: Rx descriptor ring
+ * @work_done: output parameter for indicating completed work
+ * @work_to_do: how many packets we can clean
+ *
+ * Page-based receive path that runs an XDP program on each packet.
+ **/
+static bool e1000_clean_rx_irq_xdp(struct e1000_ring *rx_ring, int *work_done,
+				   int work_to_do)
+{
+	struct e1000_adapter *adapter = rx_ring->adapter;
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+	union e1000_rx_desc_extended *rx_desc, *next_rxd;
+	struct e1000_buffer *buffer_info, *next_buffer;
+	struct xdp_buff xdp;
+	u32 length, staterr;
+	unsigned int i, crc_len;
+	int cleaned_count = 0;
+	bool cleaned = false;
+	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+	unsigned int xdp_xmit = 0;
+
+	xdp_init_buff(&xdp, PAGE_SIZE, &adapter->xdp_rxq);
+
+	i = rx_ring->next_to_clean;
+	rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
+	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	buffer_info = &rx_ring->buffer_info[i];
+
+	while (staterr & E1000_RXD_STAT_DD) {
+		struct sk_buff *skb;
+		int xdp_res;
+
+		crc_len = 0;
+		if (*work_done >= work_to_do)
+			break;
+		(*work_done)++;
+		dma_rmb();
+
+		i++;
+		if (i == rx_ring->count)
+			i = 0;
+		next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
+		prefetch(next_rxd);
+
+		next_buffer = &rx_ring->buffer_info[i];
+
+		cleaned = true;
+		cleaned_count++;
+
+		dma_sync_single_for_cpu(&pdev->dev, buffer_info->dma,
+					adapter->rx_buffer_len,
+				       DMA_FROM_DEVICE);
+		buffer_info->dma = 0;
+
+		length = le16_to_cpu(rx_desc->wb.upper.length);
+
+		/* Multi-descriptor packets not supported with XDP */
+		if (unlikely(!(staterr & E1000_RXD_STAT_EOP)))
+			adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+		if (adapter->flags2 & FLAG2_IS_DISCARDING) {
+			if (staterr & E1000_RXD_STAT_EOP)
+				adapter->flags2 &= ~FLAG2_IS_DISCARDING;
+			page_pool_put_full_page(adapter->page_pool,
+						buffer_info->page, true);
+			buffer_info->page = NULL;
+			goto next_desc;
+		}
+
+		if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
+			     !(netdev->features & NETIF_F_RXALL))) {
+			page_pool_put_full_page(adapter->page_pool,
+						buffer_info->page, true);
+			buffer_info->page = NULL;
+			goto next_desc;
+		}
+
+		/* adjust length to remove Ethernet CRC */
+		if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
+			if (netdev->features & NETIF_F_RXFCS)
+				crc_len = 4;
+			else
+				length -= 4;
+		}
+
+		/* Setup xdp_buff pointing at the page data */
+		xdp_prepare_buff(&xdp, page_address(buffer_info->page),
+				 XDP_PACKET_HEADROOM, length, true);
+		xdp_buff_clear_frags_flag(&xdp);
+
+		xdp_res = e1000_run_xdp(adapter, &xdp);
+
+		if (xdp_res == E1000_XDP_PASS) {
+			total_rx_bytes += length - crc_len;
+			total_rx_packets++;
+
+			skb = napi_build_skb(xdp.data_hard_start, PAGE_SIZE);
+			if (unlikely(!skb)) {
+				page_pool_put_full_page(adapter->page_pool,
+							buffer_info->page,
+							true);
+				buffer_info->page = NULL;
+				goto next_desc;
+			}
+
+			skb_mark_for_recycle(skb);
+			skb_reserve(skb,
+				    xdp.data - xdp.data_hard_start);
+			skb_put(skb, xdp.data_end - xdp.data);
+
+			if (xdp.data_meta != xdp.data)
+				skb_metadata_set(skb, xdp.data - xdp.data_meta);
+
+			e1000_rx_checksum(adapter, staterr, skb);
+			e1000_rx_hash(netdev,
+				      rx_desc->wb.lower.hi_dword.rss, skb);
+			e1000_receive_skb(adapter, netdev, skb, staterr,
+					  rx_desc->wb.upper.vlan);
+
+			/* page consumed by skb */
+			buffer_info->page = NULL;
+		} else if (xdp_res & E1000_XDP_TX) {
+			xdp_xmit |= xdp_res;
+			total_rx_bytes += length - crc_len;
+			total_rx_packets++;
+			/* page consumed by XDP TX */
+			buffer_info->page = NULL;
+		} else {
+			/* XDP_DROP / XDP_ABORTED - recycle page */
+			page_pool_put_full_page(adapter->page_pool,
+						buffer_info->page, true);
+			buffer_info->page = NULL;
+		}
+
+next_desc:
+		rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
+
+		if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
+			adapter->alloc_rx_buf(rx_ring, cleaned_count,
+					      GFP_ATOMIC);
+			cleaned_count = 0;
+		}
+
+		rx_desc = next_rxd;
+		buffer_info = next_buffer;
+		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	}
+	rx_ring->next_to_clean = i;
+
+	if (xdp_xmit)
+		e1000_finalize_xdp(adapter, xdp_xmit);
+
+	cleaned_count = e1000_desc_unused(rx_ring);
+	if (cleaned_count)
+		adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
+
+	adapter->total_rx_bytes += total_rx_bytes;
+	adapter->total_rx_packets += total_rx_packets;
+	return cleaned;
+}
+
 /**
  * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
  * @rx_ring: Rx descriptor ring
@@ -896,13 +1269,6 @@ static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring,
 	}
 }
 
-static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss,
-				 struct sk_buff *skb)
-{
-	if (netdev->features & NETIF_F_RXHASH)
-		skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3);
-}
-
 /**
  * e1000_clean_rx_irq - Send received data up the network stack
  * @rx_ring: Rx descriptor ring
@@ -1075,13 +1441,17 @@ static void e1000_put_txbuf(struct e1000_ring *tx_ring,
 					 buffer_info->length, DMA_TO_DEVICE);
 		buffer_info->dma = 0;
 	}
-	if (buffer_info->skb) {
+	if (buffer_info->type == E1000_TX_BUF_XDP) {
+		xdp_return_frame(buffer_info->xdpf);
+		buffer_info->xdpf = NULL;
+	} else if (buffer_info->skb) {
 		if (drop)
 			dev_kfree_skb_any(buffer_info->skb);
 		else
 			dev_consume_skb_any(buffer_info->skb);
 		buffer_info->skb = NULL;
 	}
+	buffer_info->type = E1000_TX_BUF_SKB;
 	buffer_info->time_stamp = 0;
 }
 
@@ -1242,7 +1612,8 @@ static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring)
 			if (cleaned) {
 				total_tx_packets += buffer_info->segs;
 				total_tx_bytes += buffer_info->bytecount;
-				if (buffer_info->skb) {
+				if (buffer_info->type == E1000_TX_BUF_SKB &&
+				    buffer_info->skb) {
 					bytes_compl += buffer_info->skb->len;
 					pkts_compl++;
 				}
@@ -1696,7 +2067,12 @@ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
 		}
 
 		if (buffer_info->page) {
-			put_page(buffer_info->page);
+			if (adapter->page_pool)
+				page_pool_put_full_page(adapter->page_pool,
+							buffer_info->page,
+							false);
+			else
+				put_page(buffer_info->page);
 			buffer_info->page = NULL;
 		}
 
@@ -2350,6 +2726,30 @@ int e1000e_setup_tx_resources(struct e1000_ring *tx_ring)
 	return err;
 }
 
+static int e1000_create_page_pool(struct e1000_adapter *adapter)
+{
+	struct page_pool_params pp_params = {
+		.flags = PP_FLAG_DMA_MAP | PP_FLAG_DMA_SYNC_DEV,
+		.pool_size = adapter->rx_ring->count,
+		.nid = NUMA_NO_NODE,
+		.dev = &adapter->pdev->dev,
+		.napi = &adapter->napi,
+		.dma_dir = DMA_FROM_DEVICE,
+		.offset = XDP_PACKET_HEADROOM,
+		.max_len = adapter->rx_buffer_len,
+	};
+
+	adapter->page_pool = page_pool_create(&pp_params);
+	if (IS_ERR(adapter->page_pool)) {
+		int err = PTR_ERR(adapter->page_pool);
+
+		adapter->page_pool = NULL;
+		return err;
+	}
+
+	return 0;
+}
+
 /**
  * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
  * @rx_ring: Rx descriptor ring
@@ -2389,8 +2789,31 @@ int e1000e_setup_rx_resources(struct e1000_ring *rx_ring)
 	rx_ring->next_to_use = 0;
 	rx_ring->rx_skb_top = NULL;
 
+	/* XDP RX-queue info */
+	if (xdp_rxq_info_is_reg(&adapter->xdp_rxq))
+		xdp_rxq_info_unreg(&adapter->xdp_rxq);
+
+	err = e1000_create_page_pool(adapter);
+	if (err)
+		goto err_pages;
+
+	err = xdp_rxq_info_reg(&adapter->xdp_rxq, adapter->netdev, 0,
+			       adapter->napi.napi_id);
+	if (err)
+		goto err_page_pool;
+	err = xdp_rxq_info_reg_mem_model(&adapter->xdp_rxq,
+					 MEM_TYPE_PAGE_POOL,
+					  adapter->page_pool);
+	if (err) {
+		xdp_rxq_info_unreg(&adapter->xdp_rxq);
+		goto err_page_pool;
+	}
+
 	return 0;
 
+err_page_pool:
+	page_pool_destroy(adapter->page_pool);
+	adapter->page_pool = NULL;
 err_pages:
 	for (i = 0; i < rx_ring->count; i++) {
 		buffer_info = &rx_ring->buffer_info[i];
@@ -2463,6 +2886,14 @@ void e1000e_free_rx_resources(struct e1000_ring *rx_ring)
 
 	e1000_clean_rx_ring(rx_ring);
 
+	if (xdp_rxq_info_is_reg(&adapter->xdp_rxq))
+		xdp_rxq_info_unreg(&adapter->xdp_rxq);
+
+	if (adapter->page_pool) {
+		page_pool_destroy(adapter->page_pool);
+		adapter->page_pool = NULL;
+	}
+
 	for (i = 0; i < rx_ring->count; i++)
 		kfree(rx_ring->buffer_info[i].ps_pages);
 
@@ -3185,7 +3616,11 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
 	u64 rdba;
 	u32 rdlen, rctl, rxcsum, ctrl_ext;
 
-	if (adapter->rx_ps_pages) {
+	if (adapter->xdp_prog) {
+		rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
+		adapter->clean_rx = e1000_clean_rx_irq_xdp;
+		adapter->alloc_rx_buf = e1000_alloc_rx_buffers_xdp;
+	} else if (adapter->rx_ps_pages) {
 		/* this is a 32 byte descriptor */
 		rdlen = rx_ring->count *
 		    sizeof(union e1000_rx_desc_packet_split);
@@ -6049,6 +6484,12 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 		return -EINVAL;
 	}
 
+	/* XDP requires standard MTU */
+	if (adapter->xdp_prog && new_mtu > ETH_DATA_LEN) {
+		e_err("Jumbo Frames not supported while XDP program is active.\n");
+		return -EINVAL;
+	}
+
 	/* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
 	if ((adapter->hw.mac.type >= e1000_pch2lan) &&
 	    !(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
@@ -7331,6 +7772,71 @@ static int e1000_set_features(struct net_device *netdev,
 	return 1;
 }
 
+/**
+ * e1000_xdp_setup - add/remove an XDP program
+ * @netdev: network interface device structure
+ * @bpf: XDP program setup structure
+ **/
+static int e1000_xdp_setup(struct net_device *netdev, struct netdev_bpf *bpf)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct bpf_prog *prog = bpf->prog, *old_prog;
+	bool running = netif_running(netdev);
+	bool need_reset;
+
+	/* XDP is incompatible with jumbo frames */
+	if (prog && netdev->mtu > ETH_DATA_LEN) {
+		NL_SET_ERR_MSG_MOD(bpf->extack,
+				   "XDP is not supported with jumbo frames");
+		return -EINVAL;
+	}
+
+	/* Validate frame fits in a single page with XDP headroom */
+	if (prog && netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN +
+	    XDP_PACKET_HEADROOM > PAGE_SIZE) {
+		NL_SET_ERR_MSG_MOD(bpf->extack,
+				   "Frame size too large for XDP");
+		return -EINVAL;
+	}
+
+	old_prog = xchg(&adapter->xdp_prog, prog);
+	need_reset = (!!prog != !!old_prog);
+
+	/* Transition between XDP and non-XDP requires ring reconfiguration */
+	if (need_reset && running)
+		e1000e_close(netdev);
+
+	if (old_prog)
+		bpf_prog_put(old_prog);
+
+	if (!need_reset)
+		return 0;
+
+	if (running) {
+		int err = e1000e_open(netdev);
+
+		if (err) {
+			/* Remove the XDP program since interface is down */
+			xchg(&adapter->xdp_prog, NULL);
+			if (prog)
+				bpf_prog_put(prog);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int e1000_xdp(struct net_device *netdev, struct netdev_bpf *xdp)
+{
+	switch (xdp->command) {
+	case XDP_SETUP_PROG:
+		return e1000_xdp_setup(netdev, xdp);
+	default:
+		return -EINVAL;
+	}
+}
+
 static const struct net_device_ops e1000e_netdev_ops = {
 	.ndo_open		= e1000e_open,
 	.ndo_stop		= e1000e_close,
@@ -7353,6 +7859,7 @@ static const struct net_device_ops e1000e_netdev_ops = {
 	.ndo_features_check	= passthru_features_check,
 	.ndo_hwtstamp_get	= e1000e_hwtstamp_get,
 	.ndo_hwtstamp_set	= e1000e_hwtstamp_set,
+	.ndo_bpf		= e1000_xdp,
 };
 
 /**
@@ -7563,6 +8070,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	netdev->max_mtu = adapter->max_hw_frame_size -
 			  (VLAN_ETH_HLEN + ETH_FCS_LEN);
 
+	netdev->xdp_features = NETDEV_XDP_ACT_BASIC;
+
 	if (e1000e_enable_mng_pass_thru(&adapter->hw))
 		adapter->flags |= FLAG_MNG_PT_ENABLED;
 
@@ -7776,6 +8285,8 @@ static void e1000_remove(struct pci_dev *pdev)
 	e1000e_release_hw_control(adapter);
 
 	e1000e_reset_interrupt_capability(adapter);
+	if (adapter->xdp_prog)
+		bpf_prog_put(adapter->xdp_prog);
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
 
-- 
2.53.0

RE: [Intel-wired-lan] [PATCH net-next v4 1/2] e1000e: add basic XDP support

[Loktionov, Aleksandr]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> Of Matteo Croce
> Sent: Monday, March 23, 2026 7:28 PM
> To: Nguyen, Anthony L <anthony.l.nguyen@intel.com>; Kitszel,
> Przemyslaw <przemyslaw.kitszel@intel.com>; Andrew Lunn
> <andrew+netdev@lunn.ch>; David S. Miller <davem@davemloft.net>; Eric
> Dumazet <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo
> Abeni <pabeni@redhat.com>; Alexei Starovoitov <ast@kernel.org>; Daniel
> Borkmann <daniel@iogearbox.net>; Jesper Dangaard Brouer
> <hawk@kernel.org>; John Fastabend <john.fastabend@gmail.com>; Mohsin
> Bashir <mohsin.bashr@gmail.com>
> Cc: netdev@vger.kernel.org; bpf@vger.kernel.org; intel-wired-
> lan@lists.osuosl.org; linux-kernel@vger.kernel.org
> Subject: [Intel-wired-lan] [PATCH net-next v4 1/2] e1000e: add basic
> XDP support
> 
> Add XDP support to the e1000e driver covering the actions defined by
> NETDEV_XDP_ACT_BASIC: XDP_DROP, XDP_PASS, XDP_TX and XDP_ABORTED.
> 
> Infrastructure:
> - e1000_xdp_setup() / e1000_xdp() for program attach/detach with
>   MTU validation and close/open cycle
> - ndo_bpf support in net_device_ops
> - xdp_rxq_info registration in setup/free_rx_resources
> 
> Receive path:
> - e1000_alloc_rx_buffers_xdp() for page-based Rx buffer allocation
>   with XDP_PACKET_HEADROOM
> - e1000_clean_rx_irq_xdp() as the XDP receive handler
> - e1000_run_xdp() to execute the XDP program on received packets
> - SKB building via napi_build_skb() for XDP_PASS with metadata,
>   checksum offload and RSS hash support
> 
> Transmit path:
> - e1000_xdp_xmit_ring() to DMA-map and enqueue an XDP frame
> - e1000_xdp_xmit_back() to convert an xdp_buff to a frame and send it
> - e1000_finalize_xdp() to flush the TX ring after XDP processing
> - TX completion via xdp_return_frame() with buffer type tracking
> 
> Assisted-by: claude-opus-4-6
> Signed-off-by: Matteo Croce <teknoraver@meta.com>
> ---
>  drivers/net/ethernet/intel/Kconfig         |   1 +
>  drivers/net/ethernet/intel/e1000e/e1000.h  |  18 +-
> drivers/net/ethernet/intel/e1000e/netdev.c | 533 ++++++++++++++++++++-
>  3 files changed, 540 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/Kconfig
> b/drivers/net/ethernet/intel/Kconfig
> index 288fa8ce53af..46e37cb68e70 100644
> --- a/drivers/net/ethernet/intel/Kconfig
> +++ b/drivers/net/ethernet/intel/Kconfig
> @@ -63,6 +63,7 @@ config E1000E
>  	depends on PCI && (!SPARC32 || BROKEN)
>  	depends on PTP_1588_CLOCK_OPTIONAL
>  	select CRC32
> +	select PAGE_POOL
>  	help
>  	  This driver supports the PCI-Express Intel(R) PRO/1000
> gigabit
>  	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
> diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h
> b/drivers/net/ethernet/intel/e1000e/e1000.h
> index 63ebe00376f5..4c1175d4e5cb 100644
> --- a/drivers/net/ethernet/intel/e1000e/e1000.h
> +++ b/drivers/net/ethernet/intel/e1000e/e1000.h
> @@ -19,10 +19,13 @@
>  #include <linux/net_tstamp.h>
>  #include <linux/ptp_clock_kernel.h>
>  #include <linux/ptp_classify.h>

...

> +/**
> + * e1000_xdp_xmit_ring - transmit an XDP frame on the TX ring
> + * @adapter: board private structure
> + * @tx_ring: Tx descriptor ring
> + * @xdpf: XDP frame to transmit
> + *
> + * Returns E1000_XDP_TX on success, E1000_XDP_CONSUMED on failure
> **/
> +static int e1000_xdp_xmit_ring(struct e1000_adapter *adapter,
> +			       struct e1000_ring *tx_ring,
> +			       struct xdp_frame *xdpf)
> +{
> +	struct e1000_buffer *buffer_info;
> +	struct e1000_tx_desc *tx_desc;
> +	dma_addr_t dma;
> +	u16 i;
> +
> +	if (e1000_desc_unused(tx_ring) < 1)
> +		return E1000_XDP_CONSUMED;
> +
> +	i = tx_ring->next_to_use;
Unsynchronized read of next_to_use. ndo_start_xmit on another CPU can be
reading+writing this same field RIGHT NOW under __netif_tx_lock, which we do NOT hold.
Isn't it ?

> +	buffer_info = &tx_ring->buffer_info[i];
> +
> +	dma = dma_map_single(&adapter->pdev->dev, xdpf->data, xdpf-
> >len,
> +			     DMA_TO_DEVICE);
> +	if (dma_mapping_error(&adapter->pdev->dev, dma))
> +		return E1000_XDP_CONSUMED;
> +
> +	buffer_info->xdpf = xdpf;
> +	buffer_info->type = E1000_TX_BUF_XDP;
> +	buffer_info->dma = dma;
> +	buffer_info->length = xdpf->len;
> +	buffer_info->time_stamp = jiffies;
> +	buffer_info->next_to_watch = i;
> +	buffer_info->segs = 1;
> +	buffer_info->bytecount = xdpf->len;
> +	buffer_info->mapped_as_page = 0;
> +
> +	tx_desc = E1000_TX_DESC(*tx_ring, i);
> +	tx_desc->buffer_addr = cpu_to_le64(dma);
Writing DMA descriptor that ndo_start_xmit may also be writing to
at the same index - probably causes ring corruption

> +	tx_desc->lower.data = cpu_to_le32(adapter->txd_cmd |
> +					   E1000_TXD_CMD_IFCS |
> +					   xdpf->len);
> +	tx_desc->upper.data = 0;
> +
> +	i++;
> +	if (i == tx_ring->count)
> +		i = 0;
> +	tx_ring->next_to_use = i;
Unsynchronized store - races with the identical write in e1000_xmit_frame.

> +
> +	return E1000_XDP_TX;
> +}
> +

...

>  	kfree(adapter->tx_ring);
>  	kfree(adapter->rx_ring);
> 
> --
> 2.53.0

Re: [Intel-wired-lan] [PATCH net-next v4 1/2] e1000e: add basic XDP support

[Matteo Croce]

Il giorno mar 24 mar 2026 alle ore 09:06 Loktionov, Aleksandr
<aleksandr.loktionov@intel.com> ha scritto:
>
>
>
> > -----Original Message-----
> > From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> > Of Matteo Croce
> > Sent: Monday, March 23, 2026 7:28 PM
> > To: Nguyen, Anthony L <anthony.l.nguyen@intel.com>; Kitszel,
> > Przemyslaw <przemyslaw.kitszel@intel.com>; Andrew Lunn
> > <andrew+netdev@lunn.ch>; David S. Miller <davem@davemloft.net>; Eric
> > Dumazet <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo
> > Abeni <pabeni@redhat.com>; Alexei Starovoitov <ast@kernel.org>; Daniel
> > Borkmann <daniel@iogearbox.net>; Jesper Dangaard Brouer
> > <hawk@kernel.org>; John Fastabend <john.fastabend@gmail.com>; Mohsin
> > Bashir <mohsin.bashr@gmail.com>
> > Cc: netdev@vger.kernel.org; bpf@vger.kernel.org; intel-wired-
> > lan@lists.osuosl.org; linux-kernel@vger.kernel.org
> > Subject: [Intel-wired-lan] [PATCH net-next v4 1/2] e1000e: add basic
> > XDP support
> >
> > Add XDP support to the e1000e driver covering the actions defined by
> > NETDEV_XDP_ACT_BASIC: XDP_DROP, XDP_PASS, XDP_TX and XDP_ABORTED.
> >
> > Infrastructure:
> > - e1000_xdp_setup() / e1000_xdp() for program attach/detach with
> >   MTU validation and close/open cycle
> > - ndo_bpf support in net_device_ops
> > - xdp_rxq_info registration in setup/free_rx_resources
> >
> > Receive path:
> > - e1000_alloc_rx_buffers_xdp() for page-based Rx buffer allocation
> >   with XDP_PACKET_HEADROOM
> > - e1000_clean_rx_irq_xdp() as the XDP receive handler
> > - e1000_run_xdp() to execute the XDP program on received packets
> > - SKB building via napi_build_skb() for XDP_PASS with metadata,
> >   checksum offload and RSS hash support
> >
> > Transmit path:
> > - e1000_xdp_xmit_ring() to DMA-map and enqueue an XDP frame
> > - e1000_xdp_xmit_back() to convert an xdp_buff to a frame and send it
> > - e1000_finalize_xdp() to flush the TX ring after XDP processing
> > - TX completion via xdp_return_frame() with buffer type tracking
> >
> > Assisted-by: claude-opus-4-6
> > Signed-off-by: Matteo Croce <teknoraver@meta.com>
> > ---
> >  drivers/net/ethernet/intel/Kconfig         |   1 +
> >  drivers/net/ethernet/intel/e1000e/e1000.h  |  18 +-
> > drivers/net/ethernet/intel/e1000e/netdev.c | 533 ++++++++++++++++++++-
> >  3 files changed, 540 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/intel/Kconfig
> > b/drivers/net/ethernet/intel/Kconfig
> > index 288fa8ce53af..46e37cb68e70 100644
> > --- a/drivers/net/ethernet/intel/Kconfig
> > +++ b/drivers/net/ethernet/intel/Kconfig
> > @@ -63,6 +63,7 @@ config E1000E
> >       depends on PCI && (!SPARC32 || BROKEN)
> >       depends on PTP_1588_CLOCK_OPTIONAL
> >       select CRC32
> > +     select PAGE_POOL
> >       help
> >         This driver supports the PCI-Express Intel(R) PRO/1000
> > gigabit
> >         ethernet family of adapters. For PCI or PCI-X e1000 adapters,
> > diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h
> > b/drivers/net/ethernet/intel/e1000e/e1000.h
> > index 63ebe00376f5..4c1175d4e5cb 100644
> > --- a/drivers/net/ethernet/intel/e1000e/e1000.h
> > +++ b/drivers/net/ethernet/intel/e1000e/e1000.h
> > @@ -19,10 +19,13 @@
> >  #include <linux/net_tstamp.h>
> >  #include <linux/ptp_clock_kernel.h>
> >  #include <linux/ptp_classify.h>
>
> ...
>
> > +/**
> > + * e1000_xdp_xmit_ring - transmit an XDP frame on the TX ring
> > + * @adapter: board private structure
> > + * @tx_ring: Tx descriptor ring
> > + * @xdpf: XDP frame to transmit
> > + *
> > + * Returns E1000_XDP_TX on success, E1000_XDP_CONSUMED on failure
> > **/
> > +static int e1000_xdp_xmit_ring(struct e1000_adapter *adapter,
> > +                            struct e1000_ring *tx_ring,
> > +                            struct xdp_frame *xdpf)
> > +{
> > +     struct e1000_buffer *buffer_info;
> > +     struct e1000_tx_desc *tx_desc;
> > +     dma_addr_t dma;
> > +     u16 i;
> > +
> > +     if (e1000_desc_unused(tx_ring) < 1)
> > +             return E1000_XDP_CONSUMED;
> > +
> > +     i = tx_ring->next_to_use;
> Unsynchronized read of next_to_use. ndo_start_xmit on another CPU can be
> reading+writing this same field RIGHT NOW under __netif_tx_lock, which we do NOT hold.
> Isn't it ?
>
> > +     buffer_info = &tx_ring->buffer_info[i];
> > +
> > +     dma = dma_map_single(&adapter->pdev->dev, xdpf->data, xdpf-
> > >len,
> > +                          DMA_TO_DEVICE);
> > +     if (dma_mapping_error(&adapter->pdev->dev, dma))
> > +             return E1000_XDP_CONSUMED;
> > +
> > +     buffer_info->xdpf = xdpf;
> > +     buffer_info->type = E1000_TX_BUF_XDP;
> > +     buffer_info->dma = dma;
> > +     buffer_info->length = xdpf->len;
> > +     buffer_info->time_stamp = jiffies;
> > +     buffer_info->next_to_watch = i;
> > +     buffer_info->segs = 1;
> > +     buffer_info->bytecount = xdpf->len;
> > +     buffer_info->mapped_as_page = 0;
> > +
> > +     tx_desc = E1000_TX_DESC(*tx_ring, i);
> > +     tx_desc->buffer_addr = cpu_to_le64(dma);
> Writing DMA descriptor that ndo_start_xmit may also be writing to
> at the same index - probably causes ring corruption
>
> > +     tx_desc->lower.data = cpu_to_le32(adapter->txd_cmd |
> > +                                        E1000_TXD_CMD_IFCS |
> > +                                        xdpf->len);
> > +     tx_desc->upper.data = 0;
> > +
> > +     i++;
> > +     if (i == tx_ring->count)
> > +             i = 0;
> > +     tx_ring->next_to_use = i;
> Unsynchronized store - races with the identical write in e1000_xmit_frame.
>
> > +
> > +     return E1000_XDP_TX;
> > +}
> > +
>
> ...
>
> >       kfree(adapter->tx_ring);
> >       kfree(adapter->rx_ring);
> >
> > --
> > 2.53.0
>

You're right. I see two solutions here: taking __netif_tx_lock around
the XDP TX, or using a separate TX ring dedicated to XDP.
The latter would be a bigger change for e1000e since it only has one
TX queue, so I'd go with the lock.

Thanks,
-- 
Matteo Croce

perl -e 'for($t=0;;$t++){print chr($t*($t>>8|$t>>13)&255)}' |aplay

Re: [PATCH net-next v4 1/2] e1000e: add basic XDP support

[Maciej Fijalkowski]

On Mon, Mar 23, 2026 at 07:28:22PM +0100, Matteo Croce wrote:
> Add XDP support to the e1000e driver covering the actions defined by
> NETDEV_XDP_ACT_BASIC: XDP_DROP, XDP_PASS, XDP_TX and XDP_ABORTED.
> 
> Infrastructure:
> - e1000_xdp_setup() / e1000_xdp() for program attach/detach with
>   MTU validation and close/open cycle
> - ndo_bpf support in net_device_ops
> - xdp_rxq_info registration in setup/free_rx_resources
> 
> Receive path:
> - e1000_alloc_rx_buffers_xdp() for page-based Rx buffer allocation
>   with XDP_PACKET_HEADROOM
> - e1000_clean_rx_irq_xdp() as the XDP receive handler

Hi Matteo,

Since you started to look onto this driver, I think we should have a
single routine for cleaning buffers on rx. So I would ask for getting rid
of adapter->clean_rx (or at least convince reviewers it is not possible
for some reason) and then implement XDP support with approach as XDP being
a first class citizen.

Furthermore I believe all new implementations of XDP require to include
multi-buffer support.

Last but not least, this lives in intel directory so I assume
primitives/helpers from libie/libeth should be used for this work.

Thanks,
Maciej

> - e1000_run_xdp() to execute the XDP program on received packets
> - SKB building via napi_build_skb() for XDP_PASS with metadata,
>   checksum offload and RSS hash support
> 
> Transmit path:
> - e1000_xdp_xmit_ring() to DMA-map and enqueue an XDP frame
> - e1000_xdp_xmit_back() to convert an xdp_buff to a frame and send it
> - e1000_finalize_xdp() to flush the TX ring after XDP processing
> - TX completion via xdp_return_frame() with buffer type tracking
> 
> Assisted-by: claude-opus-4-6
> Signed-off-by: Matteo Croce <teknoraver@meta.com>
> ---
>  drivers/net/ethernet/intel/Kconfig         |   1 +
>  drivers/net/ethernet/intel/e1000e/e1000.h  |  18 +-
>  drivers/net/ethernet/intel/e1000e/netdev.c | 533 ++++++++++++++++++++-
>  3 files changed, 540 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
> index 288fa8ce53af..46e37cb68e70 100644
> --- a/drivers/net/ethernet/intel/Kconfig
> +++ b/drivers/net/ethernet/intel/Kconfig
> @@ -63,6 +63,7 @@ config E1000E
>  	depends on PCI && (!SPARC32 || BROKEN)
>  	depends on PTP_1588_CLOCK_OPTIONAL
>  	select CRC32
> +	select PAGE_POOL
>  	help
>  	  This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
>  	  ethernet family of adapters. For PCI or PCI-X e1000 adapters,
> diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
> index 63ebe00376f5..4c1175d4e5cb 100644
> --- a/drivers/net/ethernet/intel/e1000e/e1000.h
> +++ b/drivers/net/ethernet/intel/e1000e/e1000.h
> @@ -19,10 +19,13 @@
>  #include <linux/net_tstamp.h>
>  #include <linux/ptp_clock_kernel.h>
>  #include <linux/ptp_classify.h>
> +#include <linux/bpf.h>
>  #include <linux/mii.h>
>  #include <linux/mdio.h>
>  #include <linux/mutex.h>
>  #include <linux/pm_qos.h>
> +#include <net/page_pool/helpers.h>
> +#include <net/xdp.h>
>  #include "hw.h"
>  
>  struct e1000_info;
> @@ -126,12 +129,21 @@ struct e1000_ps_page {
>  	u64 dma; /* must be u64 - written to hw */
>  };
>  
> +enum e1000_tx_buf_type {
> +	E1000_TX_BUF_SKB = 0,
> +	E1000_TX_BUF_XDP,
> +};
> +
>  /* wrappers around a pointer to a socket buffer,
>   * so a DMA handle can be stored along with the buffer
>   */
>  struct e1000_buffer {
>  	dma_addr_t dma;
> -	struct sk_buff *skb;
> +	union {
> +		struct sk_buff *skb;
> +		struct xdp_frame *xdpf;
> +	};
> +	enum e1000_tx_buf_type type;
>  	union {
>  		/* Tx */
>  		struct {
> @@ -259,6 +271,10 @@ struct e1000_adapter {
>  			     gfp_t gfp);
>  	struct e1000_ring *rx_ring;
>  
> +	struct bpf_prog *xdp_prog;
> +	struct xdp_rxq_info xdp_rxq;
> +	struct page_pool *page_pool;
> +
>  	u32 rx_int_delay;
>  	u32 rx_abs_int_delay;
>  
> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
> index 9befdacd6730..d77f208f00cc 100644
> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> @@ -25,6 +25,10 @@
>  #include <linux/pm_runtime.h>
>  #include <linux/prefetch.h>
>  #include <linux/suspend.h>
> +#include <linux/bpf.h>
> +#include <linux/bpf_trace.h>
> +#include <net/page_pool/helpers.h>
> +#include <net/xdp.h>
>  
>  #include "e1000.h"
>  #define CREATE_TRACE_POINTS
> @@ -33,6 +37,11 @@
>  char e1000e_driver_name[] = "e1000e";
>  
>  #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
> +
> +#define E1000_XDP_PASS		0
> +#define E1000_XDP_CONSUMED	BIT(0)
> +#define E1000_XDP_TX		BIT(1)
> +
>  static int debug = -1;
>  module_param(debug, int, 0);
>  MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
> @@ -708,6 +717,370 @@ static void e1000_alloc_rx_buffers(struct e1000_ring *rx_ring,
>  	rx_ring->next_to_use = i;
>  }
>  
> +static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss,
> +				 struct sk_buff *skb)
> +{
> +	if (netdev->features & NETIF_F_RXHASH)
> +		skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3);
> +}
> +
> +/**
> + * e1000_xdp_xmit_ring - transmit an XDP frame on the TX ring
> + * @adapter: board private structure
> + * @tx_ring: Tx descriptor ring
> + * @xdpf: XDP frame to transmit
> + *
> + * Returns E1000_XDP_TX on success, E1000_XDP_CONSUMED on failure
> + **/
> +static int e1000_xdp_xmit_ring(struct e1000_adapter *adapter,
> +			       struct e1000_ring *tx_ring,
> +			       struct xdp_frame *xdpf)
> +{
> +	struct e1000_buffer *buffer_info;
> +	struct e1000_tx_desc *tx_desc;
> +	dma_addr_t dma;
> +	u16 i;
> +
> +	if (e1000_desc_unused(tx_ring) < 1)
> +		return E1000_XDP_CONSUMED;
> +
> +	i = tx_ring->next_to_use;
> +	buffer_info = &tx_ring->buffer_info[i];
> +
> +	dma = dma_map_single(&adapter->pdev->dev, xdpf->data, xdpf->len,
> +			     DMA_TO_DEVICE);
> +	if (dma_mapping_error(&adapter->pdev->dev, dma))
> +		return E1000_XDP_CONSUMED;
> +
> +	buffer_info->xdpf = xdpf;
> +	buffer_info->type = E1000_TX_BUF_XDP;
> +	buffer_info->dma = dma;
> +	buffer_info->length = xdpf->len;
> +	buffer_info->time_stamp = jiffies;
> +	buffer_info->next_to_watch = i;
> +	buffer_info->segs = 1;
> +	buffer_info->bytecount = xdpf->len;
> +	buffer_info->mapped_as_page = 0;
> +
> +	tx_desc = E1000_TX_DESC(*tx_ring, i);
> +	tx_desc->buffer_addr = cpu_to_le64(dma);
> +	tx_desc->lower.data = cpu_to_le32(adapter->txd_cmd |
> +					   E1000_TXD_CMD_IFCS |
> +					   xdpf->len);
> +	tx_desc->upper.data = 0;
> +
> +	i++;
> +	if (i == tx_ring->count)
> +		i = 0;
> +	tx_ring->next_to_use = i;
> +
> +	return E1000_XDP_TX;
> +}
> +
> +/**
> + * e1000_xdp_xmit_back - transmit an XDP buffer back on the same device
> + * @adapter: board private structure
> + * @xdp: XDP buffer to transmit
> + *
> + * Returns E1000_XDP_TX on success, E1000_XDP_CONSUMED on failure
> + **/
> +static int e1000_xdp_xmit_back(struct e1000_adapter *adapter,
> +			       struct xdp_buff *xdp)
> +{
> +	struct xdp_frame *xdpf = xdp_convert_buff_to_frame(xdp);
> +
> +	if (unlikely(!xdpf))
> +		return E1000_XDP_CONSUMED;
> +
> +	return e1000_xdp_xmit_ring(adapter, adapter->tx_ring, xdpf);
> +}
> +
> +/**
> + * e1000_finalize_xdp - flush XDP operations after NAPI Rx loop
> + * @adapter: board private structure
> + * @xdp_xmit: bitmask of XDP actions taken during Rx processing
> + **/
> +static void e1000_finalize_xdp(struct e1000_adapter *adapter,
> +			       unsigned int xdp_xmit)
> +{
> +	struct e1000_ring *tx_ring = adapter->tx_ring;
> +
> +	if (xdp_xmit & E1000_XDP_TX) {
> +		/* Force memory writes to complete before letting h/w
> +		 * know there are new descriptors to fetch.
> +		 */
> +		wmb();
> +		if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
> +			e1000e_update_tdt_wa(tx_ring,
> +					     tx_ring->next_to_use);
> +		else
> +			writel(tx_ring->next_to_use, tx_ring->tail);
> +	}
> +}
> +
> +/**
> + * e1000_run_xdp - run an XDP program on a received packet
> + * @adapter: board private structure
> + * @xdp: XDP buffer containing packet data
> + *
> + * Returns E1000_XDP_PASS, E1000_XDP_TX, or E1000_XDP_CONSUMED
> + **/
> +static int e1000_run_xdp(struct e1000_adapter *adapter, struct xdp_buff *xdp)
> +{
> +	struct bpf_prog *xdp_prog = READ_ONCE(adapter->xdp_prog);
> +	struct net_device *netdev = adapter->netdev;
> +	int result = E1000_XDP_PASS;
> +	u32 act;
> +
> +	if (!xdp_prog)
> +		return E1000_XDP_PASS;
> +
> +	prefetchw(xdp->data_hard_start);
> +
> +	act = bpf_prog_run_xdp(xdp_prog, xdp);
> +	switch (act) {
> +	case XDP_PASS:
> +		break;
> +	case XDP_TX:
> +		result = e1000_xdp_xmit_back(adapter, xdp);
> +		if (result == E1000_XDP_CONSUMED)
> +			goto out_failure;
> +		break;
> +	default:
> +		bpf_warn_invalid_xdp_action(netdev, xdp_prog, act);
> +		fallthrough;
> +	case XDP_ABORTED:
> +out_failure:
> +		trace_xdp_exception(netdev, xdp_prog, act);
> +		fallthrough;
> +	case XDP_DROP:
> +		result = E1000_XDP_CONSUMED;
> +		break;
> +	}
> +
> +	return result;
> +}
> +
> +/**
> + * e1000_alloc_rx_buffers_xdp - Replace used receive buffers for XDP
> + * @rx_ring: Rx descriptor ring
> + * @cleaned_count: number to reallocate
> + * @gfp: flags for allocation
> + *
> + * Allocates page-based Rx buffers with XDP_PACKET_HEADROOM headroom.
> + **/
> +static void e1000_alloc_rx_buffers_xdp(struct e1000_ring *rx_ring,
> +				       int cleaned_count, gfp_t gfp)
> +{
> +	struct e1000_adapter *adapter = rx_ring->adapter;
> +	union e1000_rx_desc_extended *rx_desc;
> +	struct e1000_buffer *buffer_info;
> +	unsigned int i;
> +
> +	i = rx_ring->next_to_use;
> +	buffer_info = &rx_ring->buffer_info[i];
> +
> +	while (cleaned_count--) {
> +		if (!buffer_info->page) {
> +			buffer_info->page = page_pool_alloc_pages(adapter->page_pool,
> +								  gfp);
> +			if (!buffer_info->page) {
> +				adapter->alloc_rx_buff_failed++;
> +				break;
> +			}
> +		}
> +
> +		if (!buffer_info->dma) {
> +			buffer_info->dma = page_pool_get_dma_addr(buffer_info->page) +
> +					   XDP_PACKET_HEADROOM;
> +		}
> +
> +		rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
> +		rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
> +
> +		if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
> +			/* Force memory writes to complete before letting
> +			 * h/w know there are new descriptors to fetch.
> +			 */
> +			wmb();
> +			if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
> +				e1000e_update_rdt_wa(rx_ring, i);
> +			else
> +				writel(i, rx_ring->tail);
> +		}
> +		i++;
> +		if (i == rx_ring->count)
> +			i = 0;
> +		buffer_info = &rx_ring->buffer_info[i];
> +	}
> +
> +	rx_ring->next_to_use = i;
> +}
> +
> +/**
> + * e1000_clean_rx_irq_xdp - Receive with XDP processing
> + * @rx_ring: Rx descriptor ring
> + * @work_done: output parameter for indicating completed work
> + * @work_to_do: how many packets we can clean
> + *
> + * Page-based receive path that runs an XDP program on each packet.
> + **/
> +static bool e1000_clean_rx_irq_xdp(struct e1000_ring *rx_ring, int *work_done,
> +				   int work_to_do)
> +{
> +	struct e1000_adapter *adapter = rx_ring->adapter;
> +	struct net_device *netdev = adapter->netdev;
> +	struct pci_dev *pdev = adapter->pdev;
> +	union e1000_rx_desc_extended *rx_desc, *next_rxd;
> +	struct e1000_buffer *buffer_info, *next_buffer;
> +	struct xdp_buff xdp;
> +	u32 length, staterr;
> +	unsigned int i, crc_len;
> +	int cleaned_count = 0;
> +	bool cleaned = false;
> +	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
> +	unsigned int xdp_xmit = 0;
> +
> +	xdp_init_buff(&xdp, PAGE_SIZE, &adapter->xdp_rxq);
> +
> +	i = rx_ring->next_to_clean;
> +	rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
> +	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
> +	buffer_info = &rx_ring->buffer_info[i];
> +
> +	while (staterr & E1000_RXD_STAT_DD) {
> +		struct sk_buff *skb;
> +		int xdp_res;
> +
> +		crc_len = 0;
> +		if (*work_done >= work_to_do)
> +			break;
> +		(*work_done)++;
> +		dma_rmb();
> +
> +		i++;
> +		if (i == rx_ring->count)
> +			i = 0;
> +		next_rxd = E1000_RX_DESC_EXT(*rx_ring, i);
> +		prefetch(next_rxd);
> +
> +		next_buffer = &rx_ring->buffer_info[i];
> +
> +		cleaned = true;
> +		cleaned_count++;
> +
> +		dma_sync_single_for_cpu(&pdev->dev, buffer_info->dma,
> +					adapter->rx_buffer_len,
> +				       DMA_FROM_DEVICE);
> +		buffer_info->dma = 0;
> +
> +		length = le16_to_cpu(rx_desc->wb.upper.length);
> +
> +		/* Multi-descriptor packets not supported with XDP */
> +		if (unlikely(!(staterr & E1000_RXD_STAT_EOP)))
> +			adapter->flags2 |= FLAG2_IS_DISCARDING;
> +
> +		if (adapter->flags2 & FLAG2_IS_DISCARDING) {
> +			if (staterr & E1000_RXD_STAT_EOP)
> +				adapter->flags2 &= ~FLAG2_IS_DISCARDING;
> +			page_pool_put_full_page(adapter->page_pool,
> +						buffer_info->page, true);
> +			buffer_info->page = NULL;
> +			goto next_desc;
> +		}
> +
> +		if (unlikely((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) &&
> +			     !(netdev->features & NETIF_F_RXALL))) {
> +			page_pool_put_full_page(adapter->page_pool,
> +						buffer_info->page, true);
> +			buffer_info->page = NULL;
> +			goto next_desc;
> +		}
> +
> +		/* adjust length to remove Ethernet CRC */
> +		if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) {
> +			if (netdev->features & NETIF_F_RXFCS)
> +				crc_len = 4;
> +			else
> +				length -= 4;
> +		}
> +
> +		/* Setup xdp_buff pointing at the page data */
> +		xdp_prepare_buff(&xdp, page_address(buffer_info->page),
> +				 XDP_PACKET_HEADROOM, length, true);
> +		xdp_buff_clear_frags_flag(&xdp);
> +
> +		xdp_res = e1000_run_xdp(adapter, &xdp);
> +
> +		if (xdp_res == E1000_XDP_PASS) {
> +			total_rx_bytes += length - crc_len;
> +			total_rx_packets++;
> +
> +			skb = napi_build_skb(xdp.data_hard_start, PAGE_SIZE);
> +			if (unlikely(!skb)) {
> +				page_pool_put_full_page(adapter->page_pool,
> +							buffer_info->page,
> +							true);
> +				buffer_info->page = NULL;
> +				goto next_desc;
> +			}
> +
> +			skb_mark_for_recycle(skb);
> +			skb_reserve(skb,
> +				    xdp.data - xdp.data_hard_start);
> +			skb_put(skb, xdp.data_end - xdp.data);
> +
> +			if (xdp.data_meta != xdp.data)
> +				skb_metadata_set(skb, xdp.data - xdp.data_meta);
> +
> +			e1000_rx_checksum(adapter, staterr, skb);
> +			e1000_rx_hash(netdev,
> +				      rx_desc->wb.lower.hi_dword.rss, skb);
> +			e1000_receive_skb(adapter, netdev, skb, staterr,
> +					  rx_desc->wb.upper.vlan);
> +
> +			/* page consumed by skb */
> +			buffer_info->page = NULL;
> +		} else if (xdp_res & E1000_XDP_TX) {
> +			xdp_xmit |= xdp_res;
> +			total_rx_bytes += length - crc_len;
> +			total_rx_packets++;
> +			/* page consumed by XDP TX */
> +			buffer_info->page = NULL;
> +		} else {
> +			/* XDP_DROP / XDP_ABORTED - recycle page */
> +			page_pool_put_full_page(adapter->page_pool,
> +						buffer_info->page, true);
> +			buffer_info->page = NULL;
> +		}
> +
> +next_desc:
> +		rx_desc->wb.upper.status_error &= cpu_to_le32(~0xFF);
> +
> +		if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
> +			adapter->alloc_rx_buf(rx_ring, cleaned_count,
> +					      GFP_ATOMIC);
> +			cleaned_count = 0;
> +		}
> +
> +		rx_desc = next_rxd;
> +		buffer_info = next_buffer;
> +		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
> +	}
> +	rx_ring->next_to_clean = i;
> +
> +	if (xdp_xmit)
> +		e1000_finalize_xdp(adapter, xdp_xmit);
> +
> +	cleaned_count = e1000_desc_unused(rx_ring);
> +	if (cleaned_count)
> +		adapter->alloc_rx_buf(rx_ring, cleaned_count, GFP_ATOMIC);
> +
> +	adapter->total_rx_bytes += total_rx_bytes;
> +	adapter->total_rx_packets += total_rx_packets;
> +	return cleaned;
> +}
> +
>  /**
>   * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
>   * @rx_ring: Rx descriptor ring
> @@ -896,13 +1269,6 @@ static void e1000_alloc_jumbo_rx_buffers(struct e1000_ring *rx_ring,
>  	}
>  }
>  
> -static inline void e1000_rx_hash(struct net_device *netdev, __le32 rss,
> -				 struct sk_buff *skb)
> -{
> -	if (netdev->features & NETIF_F_RXHASH)
> -		skb_set_hash(skb, le32_to_cpu(rss), PKT_HASH_TYPE_L3);
> -}
> -
>  /**
>   * e1000_clean_rx_irq - Send received data up the network stack
>   * @rx_ring: Rx descriptor ring
> @@ -1075,13 +1441,17 @@ static void e1000_put_txbuf(struct e1000_ring *tx_ring,
>  					 buffer_info->length, DMA_TO_DEVICE);
>  		buffer_info->dma = 0;
>  	}
> -	if (buffer_info->skb) {
> +	if (buffer_info->type == E1000_TX_BUF_XDP) {
> +		xdp_return_frame(buffer_info->xdpf);
> +		buffer_info->xdpf = NULL;
> +	} else if (buffer_info->skb) {
>  		if (drop)
>  			dev_kfree_skb_any(buffer_info->skb);
>  		else
>  			dev_consume_skb_any(buffer_info->skb);
>  		buffer_info->skb = NULL;
>  	}
> +	buffer_info->type = E1000_TX_BUF_SKB;
>  	buffer_info->time_stamp = 0;
>  }
>  
> @@ -1242,7 +1612,8 @@ static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring)
>  			if (cleaned) {
>  				total_tx_packets += buffer_info->segs;
>  				total_tx_bytes += buffer_info->bytecount;
> -				if (buffer_info->skb) {
> +				if (buffer_info->type == E1000_TX_BUF_SKB &&
> +				    buffer_info->skb) {
>  					bytes_compl += buffer_info->skb->len;
>  					pkts_compl++;
>  				}
> @@ -1696,7 +2067,12 @@ static void e1000_clean_rx_ring(struct e1000_ring *rx_ring)
>  		}
>  
>  		if (buffer_info->page) {
> -			put_page(buffer_info->page);
> +			if (adapter->page_pool)
> +				page_pool_put_full_page(adapter->page_pool,
> +							buffer_info->page,
> +							false);
> +			else
> +				put_page(buffer_info->page);
>  			buffer_info->page = NULL;
>  		}
>  
> @@ -2350,6 +2726,30 @@ int e1000e_setup_tx_resources(struct e1000_ring *tx_ring)
>  	return err;
>  }
>  
> +static int e1000_create_page_pool(struct e1000_adapter *adapter)
> +{
> +	struct page_pool_params pp_params = {
> +		.flags = PP_FLAG_DMA_MAP | PP_FLAG_DMA_SYNC_DEV,
> +		.pool_size = adapter->rx_ring->count,
> +		.nid = NUMA_NO_NODE,
> +		.dev = &adapter->pdev->dev,
> +		.napi = &adapter->napi,
> +		.dma_dir = DMA_FROM_DEVICE,
> +		.offset = XDP_PACKET_HEADROOM,
> +		.max_len = adapter->rx_buffer_len,
> +	};
> +
> +	adapter->page_pool = page_pool_create(&pp_params);
> +	if (IS_ERR(adapter->page_pool)) {
> +		int err = PTR_ERR(adapter->page_pool);
> +
> +		adapter->page_pool = NULL;
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
>  /**
>   * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
>   * @rx_ring: Rx descriptor ring
> @@ -2389,8 +2789,31 @@ int e1000e_setup_rx_resources(struct e1000_ring *rx_ring)
>  	rx_ring->next_to_use = 0;
>  	rx_ring->rx_skb_top = NULL;
>  
> +	/* XDP RX-queue info */
> +	if (xdp_rxq_info_is_reg(&adapter->xdp_rxq))
> +		xdp_rxq_info_unreg(&adapter->xdp_rxq);
> +
> +	err = e1000_create_page_pool(adapter);
> +	if (err)
> +		goto err_pages;
> +
> +	err = xdp_rxq_info_reg(&adapter->xdp_rxq, adapter->netdev, 0,
> +			       adapter->napi.napi_id);
> +	if (err)
> +		goto err_page_pool;
> +	err = xdp_rxq_info_reg_mem_model(&adapter->xdp_rxq,
> +					 MEM_TYPE_PAGE_POOL,
> +					  adapter->page_pool);
> +	if (err) {
> +		xdp_rxq_info_unreg(&adapter->xdp_rxq);
> +		goto err_page_pool;
> +	}
> +
>  	return 0;
>  
> +err_page_pool:
> +	page_pool_destroy(adapter->page_pool);
> +	adapter->page_pool = NULL;
>  err_pages:
>  	for (i = 0; i < rx_ring->count; i++) {
>  		buffer_info = &rx_ring->buffer_info[i];
> @@ -2463,6 +2886,14 @@ void e1000e_free_rx_resources(struct e1000_ring *rx_ring)
>  
>  	e1000_clean_rx_ring(rx_ring);
>  
> +	if (xdp_rxq_info_is_reg(&adapter->xdp_rxq))
> +		xdp_rxq_info_unreg(&adapter->xdp_rxq);
> +
> +	if (adapter->page_pool) {
> +		page_pool_destroy(adapter->page_pool);
> +		adapter->page_pool = NULL;
> +	}
> +
>  	for (i = 0; i < rx_ring->count; i++)
>  		kfree(rx_ring->buffer_info[i].ps_pages);
>  
> @@ -3185,7 +3616,11 @@ static void e1000_configure_rx(struct e1000_adapter *adapter)
>  	u64 rdba;
>  	u32 rdlen, rctl, rxcsum, ctrl_ext;
>  
> -	if (adapter->rx_ps_pages) {
> +	if (adapter->xdp_prog) {
> +		rdlen = rx_ring->count * sizeof(union e1000_rx_desc_extended);
> +		adapter->clean_rx = e1000_clean_rx_irq_xdp;
> +		adapter->alloc_rx_buf = e1000_alloc_rx_buffers_xdp;
> +	} else if (adapter->rx_ps_pages) {
>  		/* this is a 32 byte descriptor */
>  		rdlen = rx_ring->count *
>  		    sizeof(union e1000_rx_desc_packet_split);
> @@ -6049,6 +6484,12 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
>  		return -EINVAL;
>  	}
>  
> +	/* XDP requires standard MTU */
> +	if (adapter->xdp_prog && new_mtu > ETH_DATA_LEN) {
> +		e_err("Jumbo Frames not supported while XDP program is active.\n");
> +		return -EINVAL;
> +	}
> +
>  	/* Jumbo frame workaround on 82579 and newer requires CRC be stripped */
>  	if ((adapter->hw.mac.type >= e1000_pch2lan) &&
>  	    !(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
> @@ -7331,6 +7772,71 @@ static int e1000_set_features(struct net_device *netdev,
>  	return 1;
>  }
>  
> +/**
> + * e1000_xdp_setup - add/remove an XDP program
> + * @netdev: network interface device structure
> + * @bpf: XDP program setup structure
> + **/
> +static int e1000_xdp_setup(struct net_device *netdev, struct netdev_bpf *bpf)
> +{
> +	struct e1000_adapter *adapter = netdev_priv(netdev);
> +	struct bpf_prog *prog = bpf->prog, *old_prog;
> +	bool running = netif_running(netdev);
> +	bool need_reset;
> +
> +	/* XDP is incompatible with jumbo frames */
> +	if (prog && netdev->mtu > ETH_DATA_LEN) {
> +		NL_SET_ERR_MSG_MOD(bpf->extack,
> +				   "XDP is not supported with jumbo frames");
> +		return -EINVAL;
> +	}
> +
> +	/* Validate frame fits in a single page with XDP headroom */
> +	if (prog && netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN +
> +	    XDP_PACKET_HEADROOM > PAGE_SIZE) {
> +		NL_SET_ERR_MSG_MOD(bpf->extack,
> +				   "Frame size too large for XDP");
> +		return -EINVAL;
> +	}
> +
> +	old_prog = xchg(&adapter->xdp_prog, prog);
> +	need_reset = (!!prog != !!old_prog);
> +
> +	/* Transition between XDP and non-XDP requires ring reconfiguration */
> +	if (need_reset && running)
> +		e1000e_close(netdev);
> +
> +	if (old_prog)
> +		bpf_prog_put(old_prog);
> +
> +	if (!need_reset)
> +		return 0;
> +
> +	if (running) {
> +		int err = e1000e_open(netdev);
> +
> +		if (err) {
> +			/* Remove the XDP program since interface is down */
> +			xchg(&adapter->xdp_prog, NULL);
> +			if (prog)
> +				bpf_prog_put(prog);
> +			return err;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int e1000_xdp(struct net_device *netdev, struct netdev_bpf *xdp)
> +{
> +	switch (xdp->command) {
> +	case XDP_SETUP_PROG:
> +		return e1000_xdp_setup(netdev, xdp);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
>  static const struct net_device_ops e1000e_netdev_ops = {
>  	.ndo_open		= e1000e_open,
>  	.ndo_stop		= e1000e_close,
> @@ -7353,6 +7859,7 @@ static const struct net_device_ops e1000e_netdev_ops = {
>  	.ndo_features_check	= passthru_features_check,
>  	.ndo_hwtstamp_get	= e1000e_hwtstamp_get,
>  	.ndo_hwtstamp_set	= e1000e_hwtstamp_set,
> +	.ndo_bpf		= e1000_xdp,
>  };
>  
>  /**
> @@ -7563,6 +8070,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>  	netdev->max_mtu = adapter->max_hw_frame_size -
>  			  (VLAN_ETH_HLEN + ETH_FCS_LEN);
>  
> +	netdev->xdp_features = NETDEV_XDP_ACT_BASIC;
> +
>  	if (e1000e_enable_mng_pass_thru(&adapter->hw))
>  		adapter->flags |= FLAG_MNG_PT_ENABLED;
>  
> @@ -7776,6 +8285,8 @@ static void e1000_remove(struct pci_dev *pdev)
>  	e1000e_release_hw_control(adapter);
>  
>  	e1000e_reset_interrupt_capability(adapter);
> +	if (adapter->xdp_prog)
> +		bpf_prog_put(adapter->xdp_prog);
>  	kfree(adapter->tx_ring);
>  	kfree(adapter->rx_ring);
>  
> -- 
> 2.53.0
> 
> 

Re: [PATCH net-next v4 1/2] e1000e: add basic XDP support

[Matteo Croce]

Il giorno lun 30 mar 2026 alle ore 15:24 Maciej Fijalkowski
<maciej.fijalkowski@intel.com> ha scritto:
>
> On Mon, Mar 23, 2026 at 07:28:22PM +0100, Matteo Croce wrote:
> > Add XDP support to the e1000e driver covering the actions defined by
> > NETDEV_XDP_ACT_BASIC: XDP_DROP, XDP_PASS, XDP_TX and XDP_ABORTED.
> >
> > Infrastructure:
> > - e1000_xdp_setup() / e1000_xdp() for program attach/detach with
> >   MTU validation and close/open cycle
> > - ndo_bpf support in net_device_ops
> > - xdp_rxq_info registration in setup/free_rx_resources
> >
> > Receive path:
> > - e1000_alloc_rx_buffers_xdp() for page-based Rx buffer allocation
> >   with XDP_PACKET_HEADROOM
> > - e1000_clean_rx_irq_xdp() as the XDP receive handler
>
> Hi Matteo,
>
> Since you started to look onto this driver, I think we should have a
> single routine for cleaning buffers on rx. So I would ask for getting rid
> of adapter->clean_rx (or at least convince reviewers it is not possible
> for some reason) and then implement XDP support with approach as XDP being
> a first class citizen.
>

We already have e1000_clean_rx_irq, e1000_clean_jumbo_rx_irq and
e1000_clean_rx_irq_ps.
Do you mean unifying them all or just merging e1000_clean_rx_irq and
e1000_clean_rx_irq_xdp?

> Furthermore I believe all new implementations of XDP require to include
> multi-buffer support.
>

Note taken

> Last but not least, this lives in intel directory so I assume
> primitives/helpers from libie/libeth should be used for this work.
>

Only for the new XDP code or also for the existing one?
If covering also the existing code that will go into a separate
prerequisite patch.

Regards,
-- 
Matteo Croce

perl -e 'for($t=0;;$t++){print chr($t*($t>>8|$t>>13)&255)}' |aplay

RE: [Intel-wired-lan] [PATCH net-next v4 1/2] e1000e: add basic XDP support

[Loktionov, Aleksandr]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> Of Matteo Croce
> Sent: Monday, March 23, 2026 7:28 PM
> To: Nguyen, Anthony L <anthony.l.nguyen@intel.com>; Kitszel,
> Przemyslaw <przemyslaw.kitszel@intel.com>; Andrew Lunn
> <andrew+netdev@lunn.ch>; David S. Miller <davem@davemloft.net>; Eric
> Dumazet <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo
> Abeni <pabeni@redhat.com>; Alexei Starovoitov <ast@kernel.org>; Daniel
> Borkmann <daniel@iogearbox.net>; Jesper Dangaard Brouer
> <hawk@kernel.org>; John Fastabend <john.fastabend@gmail.com>; Mohsin
> Bashir <mohsin.bashr@gmail.com>
> Cc: netdev@vger.kernel.org; bpf@vger.kernel.org; intel-wired-
> lan@lists.osuosl.org; linux-kernel@vger.kernel.org
> Subject: [Intel-wired-lan] [PATCH net-next v4 1/2] e1000e: add basic
> XDP support
> 
> Add XDP support to the e1000e driver covering the actions defined by
> NETDEV_XDP_ACT_BASIC: XDP_DROP, XDP_PASS, XDP_TX and XDP_ABORTED.
> 
> Infrastructure:

...

> +/**
> + * e1000_xdp_setup - add/remove an XDP program
> + * @netdev: network interface device structure
> + * @bpf: XDP program setup structure
> + **/
> +static int e1000_xdp_setup(struct net_device *netdev, struct
> netdev_bpf
> +*bpf) {
> +	struct e1000_adapter *adapter = netdev_priv(netdev);
> +	struct bpf_prog *prog = bpf->prog, *old_prog;
> +	bool running = netif_running(netdev);
> +	bool need_reset;
> +
> +	/* XDP is incompatible with jumbo frames */
> +	if (prog && netdev->mtu > ETH_DATA_LEN) {
> +		NL_SET_ERR_MSG_MOD(bpf->extack,
> +				   "XDP is not supported with jumbo
> frames");
> +		return -EINVAL;
> +	}
> +
> +	/* Validate frame fits in a single page with XDP headroom */
> +	if (prog && netdev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN +
> +	    XDP_PACKET_HEADROOM > PAGE_SIZE) {
> +		NL_SET_ERR_MSG_MOD(bpf->extack,
> +				   "Frame size too large for XDP");
> +		return -EINVAL;
> +	}
> +
> +	old_prog = xchg(&adapter->xdp_prog, prog);
> +	need_reset = (!!prog != !!old_prog);
> +
> +	/* Transition between XDP and non-XDP requires ring
> reconfiguration */
> +	if (need_reset && running)
> +		e1000e_close(netdev);
> +
> +	if (old_prog)
> +		bpf_prog_put(old_prog);
> +
> +	if (!need_reset)
> +		return 0;
> +
> +	if (running) {
> +		int err = e1000e_open(netdev);
> +
> +		if (err) {
> +			/* Remove the XDP program since interface is down
> */
> +			xchg(&adapter->xdp_prog, NULL);
> +			if (prog)
> +				bpf_prog_put(prog);
I'm afraid the reference is owned by the BPF infrastructure, and you will drop refcount to 0.

> +			return err;
> +		}
> +	}
> +
> +	return 0;
> +}

...

>  	kfree(adapter->tx_ring);
>  	kfree(adapter->rx_ring);
> 
> --
> 2.53.0

[PATCH net-next v4 2/2] e1000e: add XDP_REDIRECT support

[Matteo Croce]

Add the ability to redirect packets to other devices via XDP_REDIRECT
and to receive redirected frames from other devices via ndo_xdp_xmit.

New functionality:
- XDP_REDIRECT case in e1000_run_xdp() using xdp_do_redirect()
- e1000_xdp_xmit() as the ndo_xdp_xmit callback for receiving
  redirected frames from other devices
- xdp_do_flush() in e1000_finalize_xdp() for REDIR completions
- xdp_features_set/clear_redirect_target() in e1000_xdp_setup()
- NETDEV_XDP_ACT_REDIRECT and NETDEV_XDP_ACT_NDO_XMIT advertised

Assisted-by: claude-opus-4-6
Signed-off-by: Matteo Croce <teknoraver@meta.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 85 +++++++++++++++++++++-
 1 file changed, 81 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index d77f208f00cc..01661e1a74e5 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -41,6 +41,7 @@ char e1000e_driver_name[] = "e1000e";
 #define E1000_XDP_PASS		0
 #define E1000_XDP_CONSUMED	BIT(0)
 #define E1000_XDP_TX		BIT(1)
+#define E1000_XDP_REDIR		BIT(2)
 
 static int debug = -1;
 module_param(debug, int, 0);
@@ -805,6 +806,9 @@ static void e1000_finalize_xdp(struct e1000_adapter *adapter,
 {
 	struct e1000_ring *tx_ring = adapter->tx_ring;
 
+	if (xdp_xmit & E1000_XDP_REDIR)
+		xdp_do_flush();
+
 	if (xdp_xmit & E1000_XDP_TX) {
 		/* Force memory writes to complete before letting h/w
 		 * know there are new descriptors to fetch.
@@ -823,13 +827,14 @@ static void e1000_finalize_xdp(struct e1000_adapter *adapter,
  * @adapter: board private structure
  * @xdp: XDP buffer containing packet data
  *
- * Returns E1000_XDP_PASS, E1000_XDP_TX, or E1000_XDP_CONSUMED
+ * Returns E1000_XDP_PASS, E1000_XDP_TX, E1000_XDP_REDIR, or E1000_XDP_CONSUMED
  **/
 static int e1000_run_xdp(struct e1000_adapter *adapter, struct xdp_buff *xdp)
 {
 	struct bpf_prog *xdp_prog = READ_ONCE(adapter->xdp_prog);
 	struct net_device *netdev = adapter->netdev;
 	int result = E1000_XDP_PASS;
+	int err;
 	u32 act;
 
 	if (!xdp_prog)
@@ -846,6 +851,12 @@ static int e1000_run_xdp(struct e1000_adapter *adapter, struct xdp_buff *xdp)
 		if (result == E1000_XDP_CONSUMED)
 			goto out_failure;
 		break;
+	case XDP_REDIRECT:
+		err = xdp_do_redirect(netdev, xdp, xdp_prog);
+		if (err)
+			goto out_failure;
+		result = E1000_XDP_REDIR;
+		break;
 	default:
 		bpf_warn_invalid_xdp_action(netdev, xdp_prog, act);
 		fallthrough;
@@ -1041,11 +1052,11 @@ static bool e1000_clean_rx_irq_xdp(struct e1000_ring *rx_ring, int *work_done,
 
 			/* page consumed by skb */
 			buffer_info->page = NULL;
-		} else if (xdp_res & E1000_XDP_TX) {
+		} else if (xdp_res & (E1000_XDP_TX | E1000_XDP_REDIR)) {
 			xdp_xmit |= xdp_res;
 			total_rx_bytes += length - crc_len;
 			total_rx_packets++;
-			/* page consumed by XDP TX */
+			/* page consumed by XDP TX/redirect */
 			buffer_info->page = NULL;
 		} else {
 			/* XDP_DROP / XDP_ABORTED - recycle page */
@@ -7812,6 +7823,11 @@ static int e1000_xdp_setup(struct net_device *netdev, struct netdev_bpf *bpf)
 	if (!need_reset)
 		return 0;
 
+	if (prog)
+		xdp_features_set_redirect_target(netdev, true);
+	else
+		xdp_features_clear_redirect_target(netdev);
+
 	if (running) {
 		int err = e1000e_open(netdev);
 
@@ -7837,6 +7853,64 @@ static int e1000_xdp(struct net_device *netdev, struct netdev_bpf *xdp)
 	}
 }
 
+/**
+ * e1000_xdp_xmit - transmit XDP frames from another device
+ * @netdev: network interface device structure
+ * @n: number of frames to transmit
+ * @frames: array of XDP frame pointers
+ * @flags: XDP transmit flags
+ *
+ * This is the ndo_xdp_xmit callback, called when other devices redirect
+ * frames to this device.
+ **/
+static int e1000_xdp_xmit(struct net_device *netdev, int n,
+			  struct xdp_frame **frames, u32 flags)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_ring *tx_ring = adapter->tx_ring;
+	struct netdev_queue *nq = netdev_get_tx_queue(netdev, 0);
+	int cpu = smp_processor_id();
+	int nxmit = 0;
+	int i;
+
+	if (unlikely(test_bit(__E1000_DOWN, &adapter->state)))
+		return -ENETDOWN;
+
+	if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
+		return -EINVAL;
+
+	if (!adapter->xdp_prog)
+		return -ENXIO;
+
+	__netif_tx_lock(nq, cpu);
+	txq_trans_cond_update(nq);
+
+	for (i = 0; i < n; i++) {
+		int err;
+
+		err = e1000_xdp_xmit_ring(adapter, tx_ring, frames[i]);
+		if (err != E1000_XDP_TX)
+			break;
+		nxmit++;
+	}
+
+	if (unlikely(flags & XDP_XMIT_FLUSH)) {
+		/* Force memory writes to complete before letting h/w
+		 * know there are new descriptors to fetch.
+		 */
+		wmb();
+		if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
+			e1000e_update_tdt_wa(tx_ring,
+					     tx_ring->next_to_use);
+		else
+			writel(tx_ring->next_to_use, tx_ring->tail);
+	}
+
+	__netif_tx_unlock(nq);
+
+	return nxmit;
+}
+
 static const struct net_device_ops e1000e_netdev_ops = {
 	.ndo_open		= e1000e_open,
 	.ndo_stop		= e1000e_close,
@@ -7860,6 +7934,7 @@ static const struct net_device_ops e1000e_netdev_ops = {
 	.ndo_hwtstamp_get	= e1000e_hwtstamp_get,
 	.ndo_hwtstamp_set	= e1000e_hwtstamp_set,
 	.ndo_bpf		= e1000_xdp,
+	.ndo_xdp_xmit		= e1000_xdp_xmit,
 };
 
 /**
@@ -8070,7 +8145,9 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	netdev->max_mtu = adapter->max_hw_frame_size -
 			  (VLAN_ETH_HLEN + ETH_FCS_LEN);
 
-	netdev->xdp_features = NETDEV_XDP_ACT_BASIC;
+	netdev->xdp_features = NETDEV_XDP_ACT_BASIC |
+			       NETDEV_XDP_ACT_REDIRECT |
+			       NETDEV_XDP_ACT_NDO_XMIT;
 
 	if (e1000e_enable_mng_pass_thru(&adapter->hw))
 		adapter->flags |= FLAG_MNG_PT_ENABLED;
-- 
2.53.0

RE: [Intel-wired-lan] [PATCH net-next v4 2/2] e1000e: add XDP_REDIRECT support

[Loktionov, Aleksandr]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> Of Matteo Croce
> Sent: Monday, March 23, 2026 7:28 PM
> To: Nguyen, Anthony L <anthony.l.nguyen@intel.com>; Kitszel,
> Przemyslaw <przemyslaw.kitszel@intel.com>; Andrew Lunn
> <andrew+netdev@lunn.ch>; David S. Miller <davem@davemloft.net>; Eric
> Dumazet <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo
> Abeni <pabeni@redhat.com>; Alexei Starovoitov <ast@kernel.org>; Daniel
> Borkmann <daniel@iogearbox.net>; Jesper Dangaard Brouer
> <hawk@kernel.org>; John Fastabend <john.fastabend@gmail.com>; Mohsin
> Bashir <mohsin.bashr@gmail.com>
> Cc: netdev@vger.kernel.org; bpf@vger.kernel.org; intel-wired-
> lan@lists.osuosl.org; linux-kernel@vger.kernel.org
> Subject: [Intel-wired-lan] [PATCH net-next v4 2/2] e1000e: add
> XDP_REDIRECT support
> 
> Add the ability to redirect packets to other devices via XDP_REDIRECT
> and to receive redirected frames from other devices via ndo_xdp_xmit.
> 
> New functionality:
> - XDP_REDIRECT case in e1000_run_xdp() using xdp_do_redirect()
> - e1000_xdp_xmit() as the ndo_xdp_xmit callback for receiving
>   redirected frames from other devices
> - xdp_do_flush() in e1000_finalize_xdp() for REDIR completions
> - xdp_features_set/clear_redirect_target() in e1000_xdp_setup()
> - NETDEV_XDP_ACT_REDIRECT and NETDEV_XDP_ACT_NDO_XMIT advertised
> 
> Assisted-by: claude-opus-4-6
> Signed-off-by: Matteo Croce <teknoraver@meta.com>
> ---
>  drivers/net/ethernet/intel/e1000e/netdev.c | 85
> +++++++++++++++++++++-
>  1 file changed, 81 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c
> b/drivers/net/ethernet/intel/e1000e/netdev.c
> index d77f208f00cc..01661e1a74e5 100644
> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> @@ -41,6 +41,7 @@ char e1000e_driver_name[] = "e1000e";
>  #define E1000_XDP_PASS		0
>  #define E1000_XDP_CONSUMED	BIT(0)
>  #define E1000_XDP_TX		BIT(1)

...

> 
> +/**
> + * e1000_xdp_xmit - transmit XDP frames from another device
> + * @netdev: network interface device structure
> + * @n: number of frames to transmit
> + * @frames: array of XDP frame pointers
> + * @flags: XDP transmit flags
> + *
> + * This is the ndo_xdp_xmit callback, called when other devices
> +redirect
> + * frames to this device.
> + **/
> +static int e1000_xdp_xmit(struct net_device *netdev, int n,
> +			  struct xdp_frame **frames, u32 flags) {
> +	struct e1000_adapter *adapter = netdev_priv(netdev);
> +	struct e1000_ring *tx_ring = adapter->tx_ring;
> +	struct netdev_queue *nq = netdev_get_tx_queue(netdev, 0);
> +	int cpu = smp_processor_id();
> +	int nxmit = 0;
> +	int i;
> +
> +	if (unlikely(test_bit(__E1000_DOWN, &adapter->state)))
> +		return -ENETDOWN;
> +
> +	if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
> +		return -EINVAL;
> +
> +	if (!adapter->xdp_prog)
> +		return -ENXIO;
> +
> +	__netif_tx_lock(nq, cpu);
> +	txq_trans_cond_update(nq);
> +
> +	for (i = 0; i < n; i++) {
> +		int err;
> +
> +		err = e1000_xdp_xmit_ring(adapter, tx_ring, frames[i]);
> +		if (err != E1000_XDP_TX)
> +			break;
On first failure, we break out of the loop. frames[i] through frames[n-1] are silently abandoned.
It should be no memleaks I hope, but silent packets drop is nasty!

> +		nxmit++;
> +	}
> +
> +	if (unlikely(flags & XDP_XMIT_FLUSH)) {
> +		/* Force memory writes to complete before letting h/w
> +		 * know there are new descriptors to fetch.
> +		 */
> +		wmb();
> +		if (adapter->flags2 & FLAG2_PCIM2PCI_ARBITER_WA)
> +			e1000e_update_tdt_wa(tx_ring,
> +					     tx_ring->next_to_use);
> +		else
> +			writel(tx_ring->next_to_use, tx_ring->tail);
> +	}
> +
> +	__netif_tx_unlock(nq);
> +
> +	return nxmit;
> +}
> +

...

> --
> 2.53.0

Re: [Intel-wired-lan] [PATCH net-next v4 2/2] e1000e: add XDP_REDIRECT support

[Matteo Croce]

Il giorno mar 24 mar 2026 alle ore 09:48 Loktionov, Aleksandr
<aleksandr.loktionov@intel.com> ha scritto:
>
>
>
> > -----Original Message-----
> > From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf
> > Of Matteo Croce
> > Sent: Monday, March 23, 2026 7:28 PM
> > To: Nguyen, Anthony L <anthony.l.nguyen@intel.com>; Kitszel,
> > Przemyslaw <przemyslaw.kitszel@intel.com>; Andrew Lunn
> > <andrew+netdev@lunn.ch>; David S. Miller <davem@davemloft.net>; Eric
> > Dumazet <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo
> > Abeni <pabeni@redhat.com>; Alexei Starovoitov <ast@kernel.org>; Daniel
> > Borkmann <daniel@iogearbox.net>; Jesper Dangaard Brouer
> > <hawk@kernel.org>; John Fastabend <john.fastabend@gmail.com>; Mohsin
> > Bashir <mohsin.bashr@gmail.com>
> > Cc: netdev@vger.kernel.org; bpf@vger.kernel.org; intel-wired-
> > lan@lists.osuosl.org; linux-kernel@vger.kernel.org
> > Subject: [Intel-wired-lan] [PATCH net-next v4 2/2] e1000e: add
> > XDP_REDIRECT support
> >
> > Add the ability to redirect packets to other devices via XDP_REDIRECT
> > and to receive redirected frames from other devices via ndo_xdp_xmit.
> >
> > New functionality:
> > - XDP_REDIRECT case in e1000_run_xdp() using xdp_do_redirect()
> > - e1000_xdp_xmit() as the ndo_xdp_xmit callback for receiving
> >   redirected frames from other devices
> > - xdp_do_flush() in e1000_finalize_xdp() for REDIR completions
> > - xdp_features_set/clear_redirect_target() in e1000_xdp_setup()
> > - NETDEV_XDP_ACT_REDIRECT and NETDEV_XDP_ACT_NDO_XMIT advertised
> >
> > Assisted-by: claude-opus-4-6
> > Signed-off-by: Matteo Croce <teknoraver@meta.com>
> > ---
> >  drivers/net/ethernet/intel/e1000e/netdev.c | 85
> > +++++++++++++++++++++-
> >  1 file changed, 81 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c
> > b/drivers/net/ethernet/intel/e1000e/netdev.c
> > index d77f208f00cc..01661e1a74e5 100644
> > --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> > +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> > @@ -41,6 +41,7 @@ char e1000e_driver_name[] = "e1000e";
> >  #define E1000_XDP_PASS               0
> >  #define E1000_XDP_CONSUMED   BIT(0)
> >  #define E1000_XDP_TX         BIT(1)
>
> ...
>
> >
> > +/**
> > + * e1000_xdp_xmit - transmit XDP frames from another device
> > + * @netdev: network interface device structure
> > + * @n: number of frames to transmit
> > + * @frames: array of XDP frame pointers
> > + * @flags: XDP transmit flags
> > + *
> > + * This is the ndo_xdp_xmit callback, called when other devices
> > +redirect
> > + * frames to this device.
> > + **/
> > +static int e1000_xdp_xmit(struct net_device *netdev, int n,
> > +                       struct xdp_frame **frames, u32 flags) {
> > +     struct e1000_adapter *adapter = netdev_priv(netdev);
> > +     struct e1000_ring *tx_ring = adapter->tx_ring;
> > +     struct netdev_queue *nq = netdev_get_tx_queue(netdev, 0);
> > +     int cpu = smp_processor_id();
> > +     int nxmit = 0;
> > +     int i;
> > +
> > +     if (unlikely(test_bit(__E1000_DOWN, &adapter->state)))
> > +             return -ENETDOWN;
> > +
> > +     if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
> > +             return -EINVAL;
> > +
> > +     if (!adapter->xdp_prog)
> > +             return -ENXIO;
> > +
> > +     __netif_tx_lock(nq, cpu);
> > +     txq_trans_cond_update(nq);
> > +
> > +     for (i = 0; i < n; i++) {
> > +             int err;
> > +
> > +             err = e1000_xdp_xmit_ring(adapter, tx_ring, frames[i]);
> > +             if (err != E1000_XDP_TX)
> > +                     break;
> On first failure, we break out of the loop. frames[i] through frames[n-1] are silently abandoned.
> It should be no memleaks I hope, but silent packets drop is nasty!
>

I wanted to be consistent with other similar drivers, this i what igb
does in igb_main.c:

for (i = 0; i < n; i++) {
        struct xdp_frame *xdpf = frames[i];
        int err;

        err = igb_xmit_xdp_ring(adapter, tx_ring, xdpf);
        if (err != IGB_XDP_TX)
                break;
        nxmit++;
}

Regards,
-- 
Matteo Croce

perl -e 'for($t=0;;$t++){print chr($t*($t>>8|$t>>13)&255)}' |aplay

Re: [PATCH net-next v4 0/2] e1000e: add XDP support

[Maciej Fijalkowski]

On Mon, Mar 23, 2026 at 07:28:21PM +0100, Matteo Croce wrote:
> Add XDP support to e1000e driver. First patch adds basic XDP support,
> while the second one adds support for AF_XDP.

This set has nothing to do with AF_XDP.

> Tested on an Intel 82574L Gigabit card with xdp-bench and xdp-trafficgen
> 
> v2: added a missing 'select PAGE_POOL' which triggered a build failure
> with some configurations.
> v3: removed a leftover file.
> v4: bugfixes
> 
> Matteo Croce (2):
>   e1000e: add basic XDP support
>   e1000e: add XDP_REDIRECT support
> 
>  drivers/net/ethernet/intel/Kconfig         |   1 +
>  drivers/net/ethernet/intel/e1000e/e1000.h  |  18 +-
>  drivers/net/ethernet/intel/e1000e/netdev.c | 610 ++++++++++++++++++++-
>  3 files changed, 617 insertions(+), 12 deletions(-)
> 
> -- 
> 2.53.0
> 
> 

Re: [PATCH net-next v4 0/2] e1000e: add XDP support

[Matteo Croce]

Il giorno lun 30 mar 2026 alle ore 15:18 Maciej Fijalkowski
<maciej.fijalkowski@intel.com> ha scritto:
>
> On Mon, Mar 23, 2026 at 07:28:21PM +0100, Matteo Croce wrote:
> > Add XDP support to e1000e driver. First patch adds basic XDP support,
> > while the second one adds support for AF_XDP.
>
> This set has nothing to do with AF_XDP.
>

Should I mention XDP_REDIRECT instead?

-- 
Matteo Croce

perl -e 'for($t=0;;$t++){print chr($t*($t>>8|$t>>13)&255)}' |aplay