netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roland Dreier <rdreier@cisco.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: netdev@vger.kernel.org, Dan Williams <dcbw@redhat.com>
Subject: [PATCH] libertas: Remove unused exports
Date: Tue, 12 Feb 2008 15:08:52 -0800	[thread overview]
Message-ID: <adaprv1vkl7.fsf@cisco.com> (raw)
In-Reply-To: <adatzkj0z7l.fsf@cisco.com> (Roland Dreier's message of "Fri, 08 Feb 2008 16:07:26 -0800")

The libertas driver exports a number of symbols with no in-tree
users; remove these unused exports.  lbs_reset_device() is completely
unused, with no callers at all, so remove the function completely.

A couple of these unused exported symbols are static, which causes the
following build error on ia64 with gcc 4.2.3:

    drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict
    drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict

This patch fixes this problem.  I don't have hardware, so this is not
run-tested, but I tested the build with

    CONFIG_LIBERTAS=y
    CONFIG_LIBERTAS_USB=m
    CONFIG_LIBERTAS_CS=m
    CONFIG_LIBERTAS_SDIO=m

and there were no problems with undefined symbols.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
Here's the patch that removes the unused exports (and a few more that
I found).

diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index eab0203..b3c1acb 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1040,7 +1040,6 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
 	lbs_deb_leave(LBS_DEB_CMD);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_mesh_access);
 
 int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan)
 {
@@ -1576,7 +1575,6 @@ done:
 	lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command);
 
 /**
  *  @brief This function allocates the command buffer and link
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index aaacd9b..4e22341 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
 int lbs_remove_card(struct lbs_private *priv);
 int lbs_start_card(struct lbs_private *priv);
 int lbs_stop_card(struct lbs_private *priv);
-int lbs_reset_device(struct lbs_private *priv);
 void lbs_host_to_card_done(struct lbs_private *priv);
 
 int lbs_update_channel(struct lbs_private *priv);
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 84fb49c..1eaf6af 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1351,8 +1350,6 @@ done:
 	lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(lbs_add_mesh);
-
 
 static void lbs_remove_mesh(struct lbs_private *priv)
 {
@@ -1372,7 +1369,6 @@ static void lbs_remove_mesh(struct lbs_private *priv)
 	free_netdev(mesh_dev);
 	lbs_deb_leave(LBS_DEB_MESH);
 }
-EXPORT_SYMBOL_GPL(lbs_remove_mesh);
 
 /**
  *  @brief This function finds the CFP in
@@ -1458,20 +1454,6 @@ void lbs_interrupt(struct lbs_private *priv)
 }
 EXPORT_SYMBOL_GPL(lbs_interrupt);
 
-int lbs_reset_device(struct lbs_private *priv)
-{
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_MAIN);
-	ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET,
-				    CMD_ACT_HALT, 0, 0, NULL);
-	msleep_interruptible(10);
-
-	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(lbs_reset_device);
-
 static int __init lbs_init_module(void)
 {
 	lbs_deb_enter(LBS_DEB_MAIN);

  parent reply	other threads:[~2008-02-12 23:09 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-09  0:07 [PATCH] libertas: Don't mark exported symbols as static Roland Dreier
2008-02-09  0:28 ` Stephen Hemminger
2008-02-09  2:01   ` Roland Dreier
2008-02-09  4:48     ` Christoph Hellwig
2008-02-09 13:52       ` Dan Williams
2008-02-12 23:08 ` Roland Dreier [this message]
2008-02-24  4:10   ` [PATCH RESEND] libertas: Remove unused exports Roland Dreier
     [not found]     ` <aday79b571e.fsf_-_-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
2008-02-25 19:12       ` Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=adaprv1vkl7.fsf@cisco.com \
    --to=rdreier@cisco.com \
    --cc=dcbw@redhat.com \
    --cc=linville@tuxdriver.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).