[PATCH net-next 1/4] net: phy: start state machine in phy_start only

[Heiner Kallweit <hkallweit1@gmail.com>]

The state machine is a no-op before phy_start() has been called.
Therefore let's enable it in phy_start() only. In phy_start()
let's call phy_start_machine() instead of phy_trigger_machine().
phy_start_machine is an alias for phy_trigger_machine but it makes
clearer that we start the state machine here instead of just
triggering a run.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/phy/phy.c        | 2 +-
 drivers/net/phy/phy_device.c | 1 -
 drivers/net/phy/phylink.c    | 1 -
 3 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 745a705a5..3df6aadc5 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -883,7 +883,7 @@ void phy_start(struct phy_device *phydev)
 	}
 	mutex_unlock(&phydev->lock);
 
-	phy_trigger_machine(phydev);
+	phy_start_machine(phydev);
 }
 EXPORT_SYMBOL(phy_start);
 
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e0ceecbed..3e284d596 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -944,7 +944,6 @@ int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
 		return rc;
 
 	phy_prepare_link(phydev, handler);
-	phy_start_machine(phydev);
 	if (phydev->irq > 0)
 		phy_start_interrupts(phydev);
 
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index e7becc737..e9b8f1037 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -679,7 +679,6 @@ static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
 		   __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported,
 		   __ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising);
 
-	phy_start_machine(phy);
 	if (phy->irq > 0)
 		phy_start_interrupts(phy);
 
-- 
2.20.1