From: Pablo Neira Ayuso <pablo@netfilter.org>
To: Eric Woudstra <ericwouds@gmail.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>, Florian Westphal <fw@strlen.de>,
Phil Sutter <phil@nwl.cc>,
Nikolay Aleksandrov <razor@blackwall.org>,
Ido Schimmel <idosch@nvidia.com>,
Kuniyuki Iwashima <kuniyu@google.com>,
Stanislav Fomichev <sdf.kernel@gmail.com>,
Samiullah Khawaja <skhawaja@google.com>,
Hangbin Liu <liuhangbin@gmail.com>,
Krishna Kumar <krikku@gmail.com>,
Martin Karsten <mkarsten@uwaterloo.ca>,
netdev@vger.kernel.org, netfilter-devel@vger.kernel.org,
bridge@lists.linux.dev
Subject: Re: [PATCH v12 nf-next 7/7] netfilter: nft_flow_offload: Add bridgeflow to nft_flow_offload_eval()
Date: Wed, 8 Jul 2026 11:52:51 +0200 [thread overview]
Message-ID: <ak4d89hkh0Jvcp2W@chamomile> (raw)
In-Reply-To: <20260707091045.967678-8-ericwouds@gmail.com>
Hi,
On Tue, Jul 07, 2026 at 11:10:45AM +0200, Eric Woudstra wrote:
> Edit nft_flow_offload_eval() to make it possible to handle a flowtable of
> the nft bridge family.
>
> Use nft_flow_offload_bridge_init() to fill the flow tuples. It uses
> nft_dev_fill_bridge_path() in each direction.
I decided to add a bit more boiler plate in my proposal to detach the
inet and bridge flowtable dataplanes.
More comments below.
> Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
> ---
> include/net/netfilter/nf_flow_table.h | 5 +
> net/netfilter/nf_flow_table_path.c | 126 ++++++++++++++++++++++++++
> net/netfilter/nft_flow_offload.c | 20 +++-
> 3 files changed, 146 insertions(+), 5 deletions(-)
>
> diff --git a/include/net/netfilter/nf_flow_table.h b/include/net/netfilter/nf_flow_table.h
> index 5c6e3b65ae85b..a109eda5250c7 100644
> --- a/include/net/netfilter/nf_flow_table.h
> +++ b/include/net/netfilter/nf_flow_table.h
> @@ -305,6 +305,11 @@ nf_flow_table_offload_del_cb(struct nf_flowtable *flow_table,
> void flow_offload_route_init(struct flow_offload *flow,
> struct nf_flow_route *route);
>
> +int flow_offload_bridge_init(struct flow_offload *flow,
> + const struct nft_pktinfo *pkt,
> + enum ip_conntrack_dir dir,
> + struct nft_flowtable *ft);
> +
> int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow);
> void flow_offload_refresh(struct nf_flowtable *flow_table,
> struct flow_offload *flow, bool force);
> diff --git a/net/netfilter/nf_flow_table_path.c b/net/netfilter/nf_flow_table_path.c
> index 2b6ebb594a9ee..cdd6a822cb811 100644
> --- a/net/netfilter/nf_flow_table_path.c
> +++ b/net/netfilter/nf_flow_table_path.c
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-only
> #include <linux/kernel.h>
> #include <linux/module.h>
> +#include <linux/if_vlan.h>
> #include <linux/init.h>
> #include <linux/etherdevice.h>
> #include <linux/netlink.h>
> @@ -365,3 +366,128 @@ int nft_flow_route(const struct nft_pktinfo *pkt, const struct nf_conn *ct,
> return -ENOENT;
> }
> EXPORT_SYMBOL_GPL(nft_flow_route);
> +
> +static int nft_dev_fill_bridge_path(struct flow_offload *flow,
> + struct nft_flowtable *ft,
> + enum ip_conntrack_dir dir,
> + const struct net_device *src_dev,
> + const struct net_device *dst_dev,
> + unsigned char *src_ha,
> + unsigned char *dst_ha)
> +{
> + struct flow_offload_tuple_rhash *th = flow->tuplehash;
> + struct net_device_path_ctx ctx = {};
> + struct net_device_path_stack stack;
> + struct nft_forward_info info = {};
> + int i, j = 0;
> +
> + for (i = th[dir].tuple.encap_num - 1; i >= 0 ; i--) {
> + if (info.num_encaps >= NF_FLOW_TABLE_ENCAP_MAX)
> + return -1;
> +
> + if (th[dir].tuple.in_vlan_ingress & BIT(i))
> + continue;
> +
> + info.encap[info.num_encaps].id = th[dir].tuple.encap[i].id;
> + info.encap[info.num_encaps].proto = th[dir].tuple.encap[i].proto;
> + info.num_encaps++;
> +
> + if (th[dir].tuple.encap[i].proto == htons(ETH_P_PPP_SES))
> + continue;
> +
> + if (ctx.num_vlans >= NET_DEVICE_PATH_VLAN_MAX)
> + return -1;
> + ctx.vlan[ctx.num_vlans].id = th[dir].tuple.encap[i].id;
> + ctx.vlan[ctx.num_vlans].proto = th[dir].tuple.encap[i].proto;
> + ctx.num_vlans++;
> + }
I am not sure why this is needed, in my approach I simplified this,
but maybe I broke bridge vlan filtering. I am not sure what test
coverage you made.
> + ctx.dev = src_dev;
> + ether_addr_copy(ctx.daddr, dst_ha);
> +
> + if (dev_fill_bridge_path(&ctx, &stack) < 0)
> + return -1;
> +
> + nft_dev_path_info(&stack, &info, dst_ha, &ft->data);
> +
> + if (!info.indev || info.indev != dst_dev)
> + return -1;
> +
> + th[!dir].tuple.iifidx = info.indev->ifindex;
> + for (i = info.num_encaps - 1; i >= 0; i--) {
> + th[!dir].tuple.encap[j].id = info.encap[i].id;
> + th[!dir].tuple.encap[j].proto = info.encap[i].proto;
> + if (info.ingress_vlans & BIT(i))
> + th[!dir].tuple.in_vlan_ingress |= BIT(j);
> + j++;
> + }
> + th[!dir].tuple.encap_num = info.num_encaps;
> +
> + th[dir].tuple.mtu = dst_dev->mtu;
> + ether_addr_copy(th[dir].tuple.out.h_source, src_ha);
> + ether_addr_copy(th[dir].tuple.out.h_dest, dst_ha);
> + th[dir].tuple.out.ifidx = info.outdev->ifindex;
> + th[dir].tuple.xmit_type = FLOW_OFFLOAD_XMIT_DIRECT;
> +
> + return 0;
> +}
> +
> +int flow_offload_bridge_init(struct flow_offload *flow,
> + const struct nft_pktinfo *pkt,
> + enum ip_conntrack_dir dir,
> + struct nft_flowtable *ft)
> +{
> + const struct net_device *in_dev, *out_dev;
> + struct ethhdr *eth = eth_hdr(pkt->skb);
> + struct flow_offload_tuple *tuple;
> + int err, i = 0;
> +
> + in_dev = nft_in(pkt);
> + if (!in_dev || !nft_flowtable_find_dev(in_dev, ft))
> + return -1;
> +
> + out_dev = nft_out(pkt);
> + if (!out_dev || !nft_flowtable_find_dev(out_dev, ft))
> + return -1;
> +
> + tuple = &flow->tuplehash[!dir].tuple;
> +
> + if (skb_vlan_tag_present(pkt->skb)) {
> + tuple->encap[i].id = skb_vlan_tag_get(pkt->skb);
> + tuple->encap[i].proto = pkt->skb->vlan_proto;
> + i++;
> + }
> +
> + switch (eth_hdr(pkt->skb)->h_proto) {
> + case htons(ETH_P_8021Q): {
> + struct vlan_hdr *vhdr = (struct vlan_hdr *)(skb_mac_header(pkt->skb)
> + + sizeof(struct ethhdr));
> + tuple->encap[i].id = ntohs(vhdr->h_vlan_TCI);
> + tuple->encap[i].proto = htons(ETH_P_8021Q);
> + i++;
> + break;
> + }
> + case htons(ETH_P_PPP_SES): {
> + struct pppoe_hdr *phdr = (struct pppoe_hdr *)(skb_mac_header(pkt->skb)
> + + sizeof(struct ethhdr));
> +
> + tuple->encap[i].id = ntohs(phdr->sid);
> + tuple->encap[i].proto = htons(ETH_P_PPP_SES);
> + i++;
> + break;
> + }
> + }
> + tuple->encap_num = i;
I am not sure these lines above can work. The VLAN tag might be
already gone by when the packet is observed from the bridge/forward
hook. I think populating the encap fields of the tuple by using the
observed packet is not good to go.
> + err = nft_dev_fill_bridge_path(flow, ft, !dir, out_dev, in_dev,
> + eth->h_dest, eth->h_source);
> + if (err < 0)
> + return err;
> +
> + err = nft_dev_fill_bridge_path(flow, ft, dir, in_dev, out_dev,
> + eth->h_source, eth->h_dest);
> + if (err < 0)
> + return err;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(flow_offload_bridge_init);
> diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c
> index 0be62841155b6..d0d63ef7cecd5 100644
> --- a/net/netfilter/nft_flow_offload.c
> +++ b/net/netfilter/nft_flow_offload.c
> @@ -53,6 +53,7 @@ static void nft_flow_offload_eval(const struct nft_expr *expr,
> {
> struct nft_flow_offload *priv = nft_expr_priv(expr);
> struct nf_flowtable *flowtable = &priv->flowtable->data;
> + bool routing = flowtable->type->family != NFPROTO_BRIDGE;
> struct tcphdr _tcph, *tcph = NULL;
> struct nf_flow_route route = {};
> enum ip_conntrack_info ctinfo;
> @@ -109,14 +110,21 @@ static void nft_flow_offload_eval(const struct nft_expr *expr,
> goto out;
>
> dir = CTINFO2DIR(ctinfo);
> - if (nft_flow_route(pkt, ct, &route, dir, priv->flowtable) < 0)
> - goto err_flow_route;
> + if (routing) {
> + if (nft_flow_route(pkt, ct, &route, dir, priv->flowtable) < 0)
> + goto err_flow_route;
> + }
As said, I am leaning towards adding a bit more boilerplate code to
separate the bridge and inet flowtable datapaths.
> flow = flow_offload_alloc(ct);
> if (!flow)
> goto err_flow_alloc;
>
> - flow_offload_route_init(flow, &route);
> + if (routing)
> + flow_offload_route_init(flow, &route);
> + else
> + if (flow_offload_bridge_init(flow, pkt, dir, priv->flowtable) < 0)
> + goto err_flow_add;
> +
> if (tcph)
> flow_offload_ct_tcp(ct);
>
> @@ -164,8 +172,10 @@ static void nft_flow_offload_eval(const struct nft_expr *expr,
> err_flow_add:
> flow_offload_free(flow);
> err_flow_alloc:
> - dst_release(route.tuple[dir].dst);
> - dst_release(route.tuple[!dir].dst);
> + if (routing) {
> + dst_release(route.tuple[dir].dst);
> + dst_release(route.tuple[!dir].dst);
> + }
> err_flow_route:
> clear_bit(IPS_OFFLOAD_BIT, &ct->status);
> out:
> --
> 2.53.0
>
next prev parent reply other threads:[~2026-07-08 9:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-07 9:10 [PATCH v12 nf-next 0/7] netfilter: Add bridge-fastpath Eric Woudstra
2026-07-07 9:10 ` [PATCH v12 nf-next 1/7] bridge: Add filling forward path from port to port Eric Woudstra
2026-07-07 9:10 ` [PATCH v12 nf-next 2/7] net: core: dev: Add dev_fill_bridge_path() Eric Woudstra
2026-07-07 9:10 ` [PATCH v12 nf-next 3/7] netfilter: nf_flow_table_offload: Add nf_flow_rule_bridge() Eric Woudstra
2026-07-08 9:48 ` Pablo Neira Ayuso
2026-07-08 18:36 ` Eric Woudstra
2026-07-07 9:10 ` [PATCH v12 nf-next 4/7] netfilter: nf_flow_table_inet: Add nf_flowtable_type flowtable_bridge Eric Woudstra
2026-07-07 9:10 ` [PATCH v12 nf-next 5/7] netfilter: nft_flow_offload: nft_flow_offload_eval: check thoff==0 Eric Woudstra
2026-07-08 9:54 ` Pablo Neira Ayuso
2026-07-07 9:10 ` [PATCH v12 nf-next 6/7] netfilter: nft_flow_offload: Add NFPROTO_BRIDGE to validate Eric Woudstra
2026-07-07 9:10 ` [PATCH v12 nf-next 7/7] netfilter: nft_flow_offload: Add bridgeflow to nft_flow_offload_eval() Eric Woudstra
2026-07-08 9:52 ` Pablo Neira Ayuso [this message]
2026-07-08 19:14 ` Eric Woudstra
2026-07-08 9:47 ` [PATCH v12 nf-next 0/7] netfilter: Add bridge-fastpath Pablo Neira Ayuso
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ak4d89hkh0Jvcp2W@chamomile \
--to=pablo@netfilter.org \
--cc=andrew+netdev@lunn.ch \
--cc=bridge@lists.linux.dev \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=ericwouds@gmail.com \
--cc=fw@strlen.de \
--cc=horms@kernel.org \
--cc=idosch@nvidia.com \
--cc=krikku@gmail.com \
--cc=kuba@kernel.org \
--cc=kuniyu@google.com \
--cc=liuhangbin@gmail.com \
--cc=mkarsten@uwaterloo.ca \
--cc=netdev@vger.kernel.org \
--cc=netfilter-devel@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=phil@nwl.cc \
--cc=razor@blackwall.org \
--cc=sdf.kernel@gmail.com \
--cc=skhawaja@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox