Re: [PATCH net-next v7 4/4] net: pse-pd: realtek-pse-mcu: add UART transport

[Oleksij Rempel <o.rempel@pengutronix.de>]

On Sun, Jul 12, 2026 at 07:22:50PM +0000, Jonas Jelonek wrote:
> Add the serdev (UART) transport for the Realtek PSE MCU core. It registers
> the MCU as a serdev device and provides the send/recv callbacks the core
> uses to exchange the 12-byte frames, receiving asynchronously via the
> serdev receive_buf callback.
> 
> The baud rate defaults to 19200 and can be overridden per board with the
> "current-speed" property.
> 
> Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>

...

> +static int rtpse_mcu_uart_probe(struct serdev_device *serdev)
> +{
...
> +
> +	fwnode_property_read_u32(dev_fwnode(dev), "current-speed", &speed);
> +	serdev_device_set_baudrate(serdev, speed);
> +	serdev_device_set_flow_control(serdev, false);
> +	serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);

Some of this functions will return errors, it will be good to get at
least warnings, even if we decide to go with best effort initialization.

Otherwise, LGTM, with this addressed you can add my:
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |