From: Parag Warudkar <parag.lkml@gmail.com>
To: Matt Carlson <mcarlson@broadcom.com>
Cc: Parag Warudkar <parag.lkml@gmail.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: 2.6.29-rc3: tg3 dead after resume
Date: Thu, 29 Jan 2009 17:06:35 -0500 (EST) [thread overview]
Message-ID: <alpine.DEB.2.00.0901291700130.5149@parag-desktop> (raw)
In-Reply-To: <20090129184215.GA13459@xw6200.broadcom.net>
On Thu, 29 Jan 2009, Matt Carlson wrote:
> Can you apply the following test patch and see if it helps? The patch
> does two things. First, it enables a bit which should restore firmware
> communication. If that fixes the problem, then let me know and I'll
> spin a proper patch.
>
> In the event that it doesn't work, the patch goes on to test the memory
> mapping by simply printing the register value at offset 0x0. The value
> should be the device's vendor ID and device ID. Please post the
> results so that I can verify it.
>
>
> diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
> index 8b3f846..39fce42 100644
> --- a/drivers/net/tg3.c
> +++ b/drivers/net/tg3.c
> @@ -7227,6 +7227,11 @@ static int tg3_init_hw(struct tg3 *tp, int reset_phy)
> {
> tg3_switch_clocks(tp);
>
> + printk( KERN_NOTICE "%s: Reg value at offset 0x0 is 0x%x\n",
> + tp->dev->name, tr32(0x0) );
> +
> + tw32(MEMARB_MODE, tr32(MEMARB_MODE) | MEMARB_MODE_ENABLE);
> +
> tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
>
> return tg3_reset_hw(tp, reset_phy);
>
Hi Matt,
Thanks for the patch. It didn't help with resume - but below is the
output after patching, let me know if you need more details.
( Looks like 0xffffffff is invalid/corrupted device id /vendor id? )
[ 163.856001] tg3 0000:0e:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20040000)
[ 163.856001] tg3 0000:0e:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 163.856001] tg3 0000:0e:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[snip]
[ 164.450277] pcieport-driver 0000:1e:00.0: setting latency timer to 64
[ 164.450415] pcieport-driver 0000:1e:01.0: setting latency timer to 64
[ 164.450493] tg3 0000:0e:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20040000)
[ 164.451110] serial 00:08: activated
[snip]
[ 168.913863] Restarting tasks ... done.
[ 170.332953] tg3 0000:0e:00.0: wake-up capability disabled by ACPI
[ 170.332960] tg3 0000:0e:00.0: PME# disabled
[ 170.333047] tg3 0000:0e:00.0: irq 54 for MSI/MSI-X
[ 170.333250] eth0: Reg value at offset 0x0 is 0xffffffff
[ 170.394281] [drm] Loading R500 Microcode
[ 170.394330] [drm] Num pipes: 1
[ 171.726650] tg3: eth0: No firmware running.
[ 183.119745] ADDRCONF(NETDEV_UP): eth0: link is not ready
Parag
next prev parent reply other threads:[~2009-01-29 22:06 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-29 0:14 2.6.29-rc3: tg3 dead after resume Parag Warudkar
2009-01-29 1:09 ` Linus Torvalds
2009-01-29 1:49 ` Parag Warudkar
2009-01-29 2:10 ` Linus Torvalds
2009-01-29 2:19 ` Matt Carlson
2009-01-29 22:22 ` Rafael J. Wysocki
2009-01-29 18:42 ` Matt Carlson
2009-01-29 22:06 ` Parag Warudkar [this message]
2009-01-29 22:22 ` Matt Carlson
2009-01-29 22:35 ` Parag Warudkar
2009-01-29 23:10 ` Rafael J. Wysocki
2009-01-30 18:40 ` Matt Carlson
2009-01-30 22:50 ` Parag Warudkar
2009-01-30 23:06 ` Linus Torvalds
2009-01-30 23:33 ` Linus Torvalds
2009-01-30 23:45 ` Parag Warudkar
2009-01-30 23:57 ` Linus Torvalds
2009-01-30 23:59 ` Rafael J. Wysocki
2009-01-31 0:28 ` Parag Warudkar
2009-01-31 0:38 ` Rafael J. Wysocki
2009-01-31 0:44 ` Ingo Molnar
2009-01-31 0:47 ` Rafael J. Wysocki
2009-01-31 1:21 ` Parag Warudkar
2009-01-31 1:37 ` Rafael J. Wysocki
2009-01-31 1:42 ` Parag Warudkar
2009-02-03 9:29 ` Rafael J. Wysocki
2009-02-03 21:27 ` Parag Warudkar
2009-02-03 22:15 ` Rafael J. Wysocki
2009-02-04 0:38 ` Parag Warudkar
2009-02-04 0:41 ` Rafael J. Wysocki
2009-02-07 3:00 ` Linus Torvalds
2009-02-07 18:03 ` Jesse Barnes
2009-01-31 1:46 ` Linus Torvalds
2009-01-31 1:54 ` Parag Warudkar
2009-01-31 2:25 ` Linus Torvalds
2009-01-31 2:40 ` Parag Warudkar
2009-01-31 18:51 ` Rafael J. Wysocki
2009-01-31 2:19 ` Linus Torvalds
2009-01-31 20:45 ` Rafael J. Wysocki
2009-01-31 1:41 ` Linus Torvalds
2009-01-31 21:08 ` Rafael J. Wysocki
2009-01-31 21:42 ` What should PCI core do during suspend-resume? (was: Re: 2.6.29-rc3: tg3 dead after resume) Rafael J. Wysocki
2009-01-31 21:59 ` Linus Torvalds
2009-01-31 23:08 ` Rafael J. Wysocki
2009-01-31 23:27 ` Linus Torvalds
2009-01-31 23:39 ` Linus Torvalds
2009-02-01 0:36 ` Rafael J. Wysocki
2009-02-01 1:06 ` Linus Torvalds
2009-02-01 1:13 ` Linus Torvalds
2009-02-01 1:20 ` Arjan van de Ven
2009-02-01 1:24 ` Rafael J. Wysocki
2009-02-07 9:21 ` Pavel Machek
2009-01-31 21:47 ` 2.6.29-rc3: tg3 dead after resume Linus Torvalds
2009-01-31 22:46 ` Rafael J. Wysocki
2009-01-31 23:01 ` Linus Torvalds
2009-02-01 0:11 ` Rafael J. Wysocki
2009-02-01 0:32 ` Linus Torvalds
2009-02-01 0:41 ` Rafael J. Wysocki
2009-02-01 0:51 ` Linus Torvalds
2009-02-07 3:27 ` Benjamin Herrenschmidt
2009-02-07 3:26 ` Benjamin Herrenschmidt
2009-01-29 23:03 ` Rafael J. Wysocki
2009-01-29 23:41 ` Matt Carlson
2009-01-30 0:10 ` Rafael J. Wysocki
2009-01-30 22:31 ` Parag Warudkar
2009-01-30 22:36 ` Linus Torvalds
2009-01-30 22:54 ` Rafael J. Wysocki
2009-01-30 23:07 ` Linus Torvalds
2009-01-30 23:13 ` Parag Warudkar
2009-01-30 23:31 ` Rafael J. Wysocki
2009-01-30 23:51 ` Linus Torvalds
2009-01-31 0:07 ` Rafael J. Wysocki
2009-01-31 0:34 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.00.0901291700130.5149@parag-desktop \
--to=parag.lkml@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mcarlson@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox