From: Julia Lawall <julia.lawall@lip6.fr>
To: Wolfgang Grandegger <wg@grandegger.com>
Cc: joe@perches.com, kernel-janitors@vger.kernel.org,
Marc Kleine-Budde <mkl@pengutronix.de>,
linux-can@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 11/26] can: constify local structures
Date: Mon, 12 Sep 2016 14:33:01 +0200 (CEST) [thread overview]
Message-ID: <alpine.DEB.2.10.1609121432210.3049@hadrien> (raw)
In-Reply-To: <1473599168-30561-12-git-send-email-Julia.Lawall@lip6.fr>
On Sun, 11 Sep 2016, Julia Lawall wrote:
> For structure types defined in the same file or local header files, find
> top-level static structure declarations that have the following
> properties:
> 1. Never reassigned.
> 2. Address never taken
> 3. Not passed to a top-level macro call
> 4. No pointer or array-typed field passed to a function or stored in a
> variable.
> Declare structures having all of these properties as const.
Actually, this patch should be dropped. Coccinelle did not recognize
kernel_ulong_t as a type, so it interpreted eg
(kernel_ulong_t)&plx_pci_card_info_adlink
as a bit and operation.
julia
> Done using Coccinelle.
> Based on a suggestion by Joe Perches <joe@perches.com>.
>
> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
>
> ---
> The semantic patch seems too long for a commit log, but is in the cover
> letter.
>
> drivers/net/can/c_can/c_can_pci.c | 4 ++--
> drivers/net/can/sja1000/plx_pci.c | 20 ++++++++++----------
> 2 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c
> index 7be393c..4bc345d 100644
> --- a/drivers/net/can/c_can/c_can_pci.c
> +++ b/drivers/net/can/c_can/c_can_pci.c
> @@ -251,14 +251,14 @@ static void c_can_pci_remove(struct pci_dev *pdev)
> pci_disable_device(pdev);
> }
>
> -static struct c_can_pci_data c_can_sta2x11= {
> +static const struct c_can_pci_data c_can_sta2x11 = {
> .type = BOSCH_C_CAN,
> .reg_align = C_CAN_REG_ALIGN_32,
> .freq = 52000000, /* 52 Mhz */
> .bar = 0,
> };
>
> -static struct c_can_pci_data c_can_pch = {
> +static const struct c_can_pci_data c_can_pch = {
> .type = BOSCH_C_CAN,
> .reg_align = C_CAN_REG_32,
> .freq = 50000000, /* 50 MHz */
> diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
> index 3eb7430..59bc378 100644
> --- a/drivers/net/can/sja1000/plx_pci.c
> +++ b/drivers/net/can/sja1000/plx_pci.c
> @@ -170,7 +170,7 @@ struct plx_pci_card_info {
> void (*reset_func)(struct pci_dev *pdev);
> };
>
> -static struct plx_pci_card_info plx_pci_card_info_adlink = {
> +static const struct plx_pci_card_info plx_pci_card_info_adlink = {
> "Adlink PCI-7841/cPCI-7841", 2,
> PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
> {1, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} },
> @@ -178,7 +178,7 @@ static struct plx_pci_card_info plx_pci_card_info_adlink = {
> /* based on PLX9052 */
> };
>
> -static struct plx_pci_card_info plx_pci_card_info_adlink_se = {
> +static const struct plx_pci_card_info plx_pci_card_info_adlink_se = {
> "Adlink PCI-7841/cPCI-7841 SE", 2,
> PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
> {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x80, 0x80} },
> @@ -186,7 +186,7 @@ static struct plx_pci_card_info plx_pci_card_info_adlink_se = {
> /* based on PLX9052 */
> };
>
> -static struct plx_pci_card_info plx_pci_card_info_esd200 = {
> +static const struct plx_pci_card_info plx_pci_card_info_esd200 = {
> "esd CAN-PCI/CPCI/PCI104/200", 2,
> PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
> {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} },
> @@ -194,7 +194,7 @@ static struct plx_pci_card_info plx_pci_card_info_esd200 = {
> /* based on PLX9030/9050 */
> };
>
> -static struct plx_pci_card_info plx_pci_card_info_esd266 = {
> +static const struct plx_pci_card_info plx_pci_card_info_esd266 = {
> "esd CAN-PCI/PMC/266", 2,
> PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
> {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} },
> @@ -202,7 +202,7 @@ static struct plx_pci_card_info plx_pci_card_info_esd266 = {
> /* based on PLX9056 */
> };
>
> -static struct plx_pci_card_info plx_pci_card_info_esd2000 = {
> +static const struct plx_pci_card_info plx_pci_card_info_esd2000 = {
> "esd CAN-PCIe/2000", 2,
> PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
> {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} },
> @@ -210,7 +210,7 @@ static struct plx_pci_card_info plx_pci_card_info_esd2000 = {
> /* based on PEX8311 */
> };
>
> -static struct plx_pci_card_info plx_pci_card_info_ixxat = {
> +static const struct plx_pci_card_info plx_pci_card_info_ixxat = {
> "IXXAT PC-I 04/PCI", 2,
> PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
> {0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x200, 0x80} },
> @@ -218,7 +218,7 @@ static struct plx_pci_card_info plx_pci_card_info_ixxat = {
> /* based on PLX9050 */
> };
>
> -static struct plx_pci_card_info plx_pci_card_info_marathon_pci = {
> +static const struct plx_pci_card_info plx_pci_card_info_marathon_pci = {
> "Marathon CAN-bus-PCI", 2,
> PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
> {0, 0x00, 0x00}, { {2, 0x00, 0x00}, {4, 0x00, 0x00} },
> @@ -234,7 +234,7 @@ static struct plx_pci_card_info plx_pci_card_info_marathon_pcie = {
> /* based on PEX8311 */
> };
>
> -static struct plx_pci_card_info plx_pci_card_info_tews = {
> +static const struct plx_pci_card_info plx_pci_card_info_tews = {
> "TEWS TECHNOLOGIES TPMC810", 2,
> PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
> {0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} },
> @@ -242,7 +242,7 @@ static struct plx_pci_card_info plx_pci_card_info_tews = {
> /* based on PLX9030 */
> };
>
> -static struct plx_pci_card_info plx_pci_card_info_cti = {
> +static const struct plx_pci_card_info plx_pci_card_info_cti = {
> "Connect Tech Inc. CANpro/104-Plus Opto (CRG001)", 2,
> PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
> {0, 0x00, 0x00}, { {2, 0x000, 0x80}, {2, 0x100, 0x80} },
> @@ -250,7 +250,7 @@ static struct plx_pci_card_info plx_pci_card_info_cti = {
> /* based on PLX9030 */
> };
>
> -static struct plx_pci_card_info plx_pci_card_info_elcus = {
> +static const struct plx_pci_card_info plx_pci_card_info_elcus = {
> "Eclus CAN-200-PCI", 2,
> PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
> {1, 0x00, 0x00}, { {2, 0x00, 0x80}, {3, 0x00, 0x80} },
>
> --
> To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2016-09-12 12:33 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-11 13:05 [PATCH 00/26] constify local structures Julia Lawall
2016-09-11 13:05 ` [PATCH 05/26] ARCNET: " Julia Lawall
2016-09-12 12:31 ` Julia Lawall
2016-09-11 13:05 ` [PATCH 06/26] ath: " Julia Lawall
2016-09-14 17:02 ` [06/26] " Kalle Valo
2016-09-11 13:05 ` [PATCH 07/26] net/mlx4_core: " Julia Lawall
2016-09-12 4:59 ` Leon Romanovsky
2016-09-11 13:05 ` [PATCH 08/26] iwlegacy: " Julia Lawall
2016-09-12 11:24 ` Stanislaw Gruszka
2016-09-11 13:05 ` [PATCH 11/26] can: " Julia Lawall
2016-09-12 12:33 ` Julia Lawall [this message]
2016-09-11 13:06 ` [PATCH 20/26] stmmac: pci: " Julia Lawall
2016-09-12 12:08 ` Julia Lawall
[not found] ` <1473599168-30561-1-git-send-email-Julia.Lawall-L2FTfq7BK8M@public.gmane.org>
2016-09-11 13:06 ` [PATCH 21/26] rtlwifi: rtl818x: " Julia Lawall
2016-09-11 17:21 ` [PATCH 00/26] " Jarkko Sakkinen
2016-09-12 8:54 ` Julia Lawall
2016-09-12 13:16 ` Jarkko Sakkinen
2016-09-12 13:23 ` Julia Lawall
2016-09-12 13:43 ` Felipe Balbi
2016-09-12 13:52 ` Julia Lawall
2016-09-12 18:50 ` Jarkko Sakkinen
2016-09-12 13:57 ` Geert Uytterhoeven
2016-09-12 20:14 ` Jarkko Sakkinen
2016-09-12 21:11 ` Julia Lawall
2016-09-11 17:56 ` Joe Perches
2016-09-11 19:11 ` Julia Lawall
2016-09-11 13:06 ` [PATCH 23/26] sh_eth: " Julia Lawall
2016-09-11 18:14 ` Sergei Shtylyov
2016-09-12 8:55 ` Julia Lawall
2016-09-12 9:43 ` Julia Lawall
2016-09-11 13:06 ` [PATCH 25/26] pch_gbe: " Julia Lawall
2016-09-12 2:48 ` David Miller
2016-09-12 9:07 ` Julia Lawall
2016-09-12 16:33 ` David Miller
2016-09-12 12:25 ` Julia Lawall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.10.1609121432210.3049@hadrien \
--to=julia.lawall@lip6.fr \
--cc=joe@perches.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox