From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nicolas Pitre Subject: Re: [net-next v2 09/71] smsc: Move the SMC (SMSC) drivers Date: Sun, 31 Jul 2011 12:47:07 -0400 (EDT) Message-ID: References: <1312082850-24914-1-git-send-email-jeffrey.t.kirsher@intel.com> <1312082850-24914-10-git-send-email-jeffrey.t.kirsher@intel.com> Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Content-Transfer-Encoding: 7BIT Cc: davem@davemloft.net, netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com, Donald Becker , Erik Stahlman , Dustin McIntire , Steve Glendinning , David Hinds To: Jeff Kirsher Return-path: Received: from relais.videotron.ca ([24.201.245.36]:9530 "EHLO relais.videotron.ca" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751833Ab1GaQrJ (ORCPT ); Sun, 31 Jul 2011 12:47:09 -0400 Received: from xanadu.home ([66.130.28.92]) by vl-mh-mrz21.ip.videotron.ca (Sun Java(tm) System Messaging Server 6.3-8.01 (built Dec 16 2008; 32bit)) with ESMTP id <0LP700EGYIL7SU30@vl-mh-mrz21.ip.videotron.ca> for netdev@vger.kernel.org; Sun, 31 Jul 2011 12:46:19 -0400 (EDT) In-reply-to: <1312082850-24914-10-git-send-email-jeffrey.t.kirsher@intel.com> Sender: netdev-owner@vger.kernel.org List-ID: On Sat, 30 Jul 2011, Jeff Kirsher wrote: > Moves the SMC (SMSC) drivers into drivers/net/ethernet/smsc/ and the > necessary Kconfig and Makefile changes. Also did some cleanup > of NET_VENDOR_SMC Kconfig tag for the 8390 based drivers. > > CC: Nicolas Pitre > CC: Donald Becker > CC: Erik Stahlman > CC: Dustin McIntire > CC: Steve Glendinning > CC: David Hinds > Signed-off-by: Jeff Kirsher Acked-by: Nicolas Pitre > --- > MAINTAINERS | 6 +- > drivers/net/Kconfig | 105 ---------------- > drivers/net/Makefile | 7 - > drivers/net/ethernet/8390/Kconfig | 21 +--- > drivers/net/ethernet/Kconfig | 1 + > drivers/net/ethernet/Makefile | 1 + > drivers/net/ethernet/smsc/Kconfig | 128 ++++++++++++++++++++ > drivers/net/ethernet/smsc/Makefile | 11 ++ > drivers/net/{ => ethernet/smsc}/epic100.c | 0 > drivers/net/{ => ethernet/smsc}/smc911x.c | 0 > drivers/net/{ => ethernet/smsc}/smc911x.h | 0 > drivers/net/{ => ethernet/smsc}/smc9194.c | 0 > drivers/net/{ => ethernet/smsc}/smc9194.h | 0 > .../net/{pcmcia => ethernet/smsc}/smc91c92_cs.c | 0 > drivers/net/{ => ethernet/smsc}/smc91x.c | 0 > drivers/net/{ => ethernet/smsc}/smc91x.h | 0 > drivers/net/{ => ethernet/smsc}/smsc911x.c | 0 > drivers/net/{ => ethernet/smsc}/smsc911x.h | 0 > drivers/net/{ => ethernet/smsc}/smsc9420.c | 0 > drivers/net/{ => ethernet/smsc}/smsc9420.h | 0 > drivers/net/pcmcia/Kconfig | 11 -- > drivers/net/pcmcia/Makefile | 1 - > 22 files changed, 148 insertions(+), 144 deletions(-) > create mode 100644 drivers/net/ethernet/smsc/Kconfig > create mode 100644 drivers/net/ethernet/smsc/Makefile > rename drivers/net/{ => ethernet/smsc}/epic100.c (100%) > rename drivers/net/{ => ethernet/smsc}/smc911x.c (100%) > rename drivers/net/{ => ethernet/smsc}/smc911x.h (100%) > rename drivers/net/{ => ethernet/smsc}/smc9194.c (100%) > rename drivers/net/{ => ethernet/smsc}/smc9194.h (100%) > rename drivers/net/{pcmcia => ethernet/smsc}/smc91c92_cs.c (100%) > rename drivers/net/{ => ethernet/smsc}/smc91x.c (100%) > rename drivers/net/{ => ethernet/smsc}/smc91x.h (100%) > rename drivers/net/{ => ethernet/smsc}/smsc911x.c (100%) > rename drivers/net/{ => ethernet/smsc}/smsc911x.h (100%) > rename drivers/net/{ => ethernet/smsc}/smsc9420.c (100%) > rename drivers/net/{ => ethernet/smsc}/smsc9420.h (100%) > > diff --git a/MAINTAINERS b/MAINTAINERS > index eb35265..31c76f4 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -5831,7 +5831,7 @@ F: mm/sl?b.c > SMC91x ETHERNET DRIVER > M: Nicolas Pitre > S: Odd Fixes > -F: drivers/net/smc91x.* > +F: drivers/net/ethernet/smsc/smc91x.* > > SMM665 HARDWARE MONITOR DRIVER > M: Guenter Roeck > @@ -5866,13 +5866,13 @@ M: Steve Glendinning > L: netdev@vger.kernel.org > S: Supported > F: include/linux/smsc911x.h > -F: drivers/net/smsc911x.* > +F: drivers/net/ethernet/smsc/smsc911x.* > > SMSC9420 PCI ETHERNET DRIVER > M: Steve Glendinning > L: netdev@vger.kernel.org > S: Supported > -F: drivers/net/smsc9420.* > +F: drivers/net/ethernet/smsc/smsc9420.* > > SN-IA64 (Itanium) SUB-PLATFORM > M: Jes Sorensen > diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig > index 8879506..c0aa2e3 100644 > --- a/drivers/net/Kconfig > +++ b/drivers/net/Kconfig > @@ -508,39 +508,6 @@ config BFIN_MAC_USE_HWSTAMP > help > To support the IEEE 1588 Precision Time Protocol (PTP), select y here > > -config SMC9194 > - tristate "SMC 9194 support" > - depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN) > - select CRC32 > - ---help--- > - This is support for the SMC9xxx based Ethernet cards. Choose this > - option if you have a DELL laptop with the docking station, or > - another SMC9192/9194 based chipset. Say Y if you want it compiled > - into the kernel, and read the file > - and the Ethernet-HOWTO, > - available from . > - > - To compile this driver as a module, choose M here. The module > - will be called smc9194. > - > -config SMC91X > - tristate "SMC 91C9x/91C1xxx support" > - select CRC32 > - select MII > - depends on ARM || M32R || SUPERH || \ > - MIPS || BLACKFIN || MN10300 || COLDFIRE > - help > - This is a driver for SMC's 91x series of Ethernet chipsets, > - including the SMC91C94 and the SMC91C111. Say Y if you want it > - compiled into the kernel, and read the file > - and the Ethernet-HOWTO, > - available from . > - > - This driver is also available as a module ( = code which can be > - inserted in and removed from the running kernel whenever you want). > - The module will be called smc91x. If you want to compile it as a > - module, say M here and read . > - > config PXA168_ETH > tristate "Marvell pxa168 ethernet support" > depends on CPU_PXA168 > @@ -655,44 +622,6 @@ config GRETH > help > Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC. > > -config SMC911X > - tristate "SMSC LAN911[5678] support" > - select CRC32 > - select MII > - depends on ARM || SUPERH || MN10300 > - help > - This is a driver for SMSC's LAN911x series of Ethernet chipsets > - including the new LAN9115, LAN9116, LAN9117, and LAN9118. > - Say Y if you want it compiled into the kernel, > - and read the Ethernet-HOWTO, available from > - . > - > - This driver is also available as a module. The module will be > - called smc911x. If you want to compile it as a module, say M > - here and read > - > -config SMSC911X > - tristate "SMSC LAN911x/LAN921x families embedded ethernet support" > - depends on ARM || SUPERH || BLACKFIN || MIPS || MN10300 > - select CRC32 > - select MII > - select PHYLIB > - ---help--- > - Say Y here if you want support for SMSC LAN911x and LAN921x families > - of ethernet controllers. > - > - To compile this driver as a module, choose M here and read > - . The module > - will be called smsc911x. > - > -config SMSC911X_ARCH_HOOKS > - def_bool n > - depends on SMSC911X > - help > - If the arch enables this, it allows the arch to implement various > - hooks for more comprehensive interrupt control and also to override > - the source of the MAC address. > - > config NET_VENDOR_RACAL > bool "Racal-Interlan (Micom) NI cards" > depends on ISA > @@ -1091,33 +1020,6 @@ config SIS900 > To compile this driver as a module, choose M here: the module > will be called sis900. This is recommended. > > -config EPIC100 > - tristate "SMC EtherPower II" > - depends on NET_PCI && PCI > - select CRC32 > - select MII > - help > - This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, > - which is based on the SMC83c17x (EPIC/100). > - More specific information and updates are available from > - . > - > -config SMSC9420 > - tristate "SMSC LAN9420 PCI ethernet adapter support" > - depends on NET_PCI && PCI > - select CRC32 > - select PHYLIB > - select SMSC_PHY > - help > - This is a driver for SMSC's LAN9420 PCI ethernet adapter. > - Say Y if you want it compiled into the kernel, > - and read the Ethernet-HOWTO, available from > - . > - > - This driver is also available as a module. The module will be > - called smsc9420. If you want to compile it as a module, say M > - here and read > - > config SUNDANCE > tristate "Sundance Alta support" > depends on NET_PCI && PCI > @@ -1834,13 +1736,6 @@ config MYRI10GE_DCA > driver. DCA is a method for warming the CPU cache before data > is used, with the intent of lessening the impact of cache misses. > > -config NETXEN_NIC > - tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" > - depends on PCI > - select FW_LOADER > - help > - This enables the support for NetXen's Gigabit Ethernet card. > - > config NIU > tristate "Sun Neptune 10Gbit Ethernet support" > depends on PCI > diff --git a/drivers/net/Makefile b/drivers/net/Makefile > index 8e41978..4dfa35c 100644 > --- a/drivers/net/Makefile > +++ b/drivers/net/Makefile > @@ -55,8 +55,6 @@ obj-$(CONFIG_MACE) += mace.o > obj-$(CONFIG_BMAC) += bmac.o > > obj-$(CONFIG_TLAN) += tlan.o > -obj-$(CONFIG_EPIC100) += epic100.o > -obj-$(CONFIG_SMSC9420) += smsc9420.o > obj-$(CONFIG_SIS190) += sis190.o > obj-$(CONFIG_SIS900) += sis900.o > obj-$(CONFIG_R6040) += r6040.o > @@ -95,7 +93,6 @@ obj-$(CONFIG_NET) += Space.o loopback.o > obj-$(CONFIG_SEEQ8005) += seeq8005.o > obj-$(CONFIG_NET_SB1000) += sb1000.o > obj-$(CONFIG_HP100) += hp100.o > -obj-$(CONFIG_SMC9194) += smc9194.o > obj-$(CONFIG_FEC) += fec.o > obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o > ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y) > @@ -178,9 +175,6 @@ obj-$(CONFIG_IBMVETH) += ibmveth.o > obj-$(CONFIG_S2IO) += s2io.o > obj-$(CONFIG_VXGE) += vxge/ > obj-$(CONFIG_MYRI10GE) += myri10ge/ > -obj-$(CONFIG_SMC91X) += smc91x.o > -obj-$(CONFIG_SMC911X) += smc911x.o > -obj-$(CONFIG_SMSC911X) += smsc911x.o > obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o > obj-$(CONFIG_BFIN_MAC) += bfin_mac.o > obj-$(CONFIG_DM9000) += dm9000.o > @@ -227,7 +221,6 @@ obj-$(CONFIG_NETCONSOLE) += netconsole.o > > obj-$(CONFIG_FS_ENET) += fs_enet/ > > -obj-$(CONFIG_NETXEN_NIC) += netxen/ > obj-$(CONFIG_NIU) += niu.o > obj-$(CONFIG_VIRTIO_NET) += virtio_net.o > obj-$(CONFIG_SFC) += sfc/ > diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig > index 072c641..1c48e4f 100644 > --- a/drivers/net/ethernet/8390/Kconfig > +++ b/drivers/net/ethernet/8390/Kconfig > @@ -262,22 +262,9 @@ config STNIC > > If unsure, say N. > > -config NET_VENDOR_SMC > - bool "Western Digital/SMC cards" > - depends on NET_VENDOR_8390 && (ISA || MCA || EISA || MAC) > - ---help--- > - If you have a network (Ethernet) card belonging to this class, say Y > - and read the Ethernet-HOWTO, available from > - . > - > - Note that the answer to this question doesn't directly affect the > - kernel: saying N will just cause the configurator to skip all > - the questions about Western Digital cards. If you say Y, you will be > - asked for your specific card in the following questions. > - > config ULTRAMCA > tristate "SMC Ultra MCA support" > - depends on NET_VENDOR_SMC && MCA > + depends on NET_VENDOR_8390 && MCA > select CRC32 > ---help--- > If you have a network (Ethernet) card of this type and are running > @@ -289,7 +276,7 @@ config ULTRAMCA > > config ULTRA > tristate "SMC Ultra support" > - depends on NET_VENDOR_SMC && ISA > + depends on NET_VENDOR_8390 && ISA > select CRC32 > ---help--- > If you have a network (Ethernet) card of this type, say Y and read > @@ -308,7 +295,7 @@ config ULTRA > > config ULTRA32 > tristate "SMC Ultra32 EISA support" > - depends on NET_VENDOR_SMC && EISA > + depends on NET_VENDOR_8390 && EISA > select CRC32 > ---help--- > If you have a network (Ethernet) card of this type, say Y and read > @@ -320,7 +307,7 @@ config ULTRA32 > > config WD80x3 > tristate "WD80*3 support" > - depends on NET_VENDOR_SMC && ISA > + depends on NET_VENDOR_8390 && ISA > select CRC32 > ---help--- > If you have a network (Ethernet) card of this type, say Y and read > diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig > index ab591bb..ed5836c 100644 > --- a/drivers/net/ethernet/Kconfig > +++ b/drivers/net/ethernet/Kconfig > @@ -18,5 +18,6 @@ source "drivers/net/ethernet/broadcom/Kconfig" > source "drivers/net/ethernet/chelsio/Kconfig" > source "drivers/net/ethernet/intel/Kconfig" > source "drivers/net/ethernet/qlogic/Kconfig" > +source "drivers/net/ethernet/smsc/Kconfig" > > endif # ETHERNET > diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile > index d8cf120..983fd27 100644 > --- a/drivers/net/ethernet/Makefile > +++ b/drivers/net/ethernet/Makefile > @@ -9,3 +9,4 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/ > obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/ > obj-$(CONFIG_NET_VENDOR_INTEL) += intel/ > obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ > +obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/ > diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig > new file mode 100644 > index 0000000..dbb3069 > --- /dev/null > +++ b/drivers/net/ethernet/smsc/Kconfig > @@ -0,0 +1,128 @@ > +# > +# Western Digital/SMC network device configuration > +# > + > +config NET_VENDOR_SMSC > + bool "SMC (SMSC)/Western Digital devices" > + depends on ARM || ISA || MAC || ARM || MIPS || M32R || SUPERH || \ > + BLACKFIN || MN10300 || COLDFIRE || PCI || PCMCIA > + ---help--- > + If you have a network (Ethernet) card belonging to this class, say Y > + and read the Ethernet-HOWTO, available from > + . > + > + Note that the answer to this question doesn't directly affect the > + kernel: saying N will just cause the configurator to skip all > + the questions about SMC/Western Digital cards. If you say Y, you will > + be asked for your specific card in the following questions. > + > +config SMC9194 > + tristate "SMC 9194 support" > + depends on NET_VENDOR_SMSC && (ISA || MAC && BROKEN) > + select CRC32 > + ---help--- > + This is support for the SMC9xxx based Ethernet cards. Choose this > + option if you have a DELL laptop with the docking station, or > + another SMC9192/9194 based chipset. Say Y if you want it compiled > + into the kernel, and read the file > + and the Ethernet-HOWTO, > + available from . > + > + To compile this driver as a module, choose M here. The module > + will be called smc9194. > + > +config SMC91X > + tristate "SMC 91C9x/91C1xxx support" > + select CRC32 > + select MII > + depends on NET_VENDOR_SMSC && (ARM || M32R || SUPERH || \ > + MIPS || BLACKFIN || MN10300 || COLDFIRE) > + ---help--- > + This is a driver for SMC's 91x series of Ethernet chipsets, > + including the SMC91C94 and the SMC91C111. Say Y if you want it > + compiled into the kernel, and read the file > + and the Ethernet-HOWTO, > + available from . > + > + This driver is also available as a module ( = code which can be > + inserted in and removed from the running kernel whenever you want). > + The module will be called smc91x. If you want to compile it as a > + module, say M here and read . > + > +config PCMCIA_SMC91C92 > + tristate "SMC 91Cxx PCMCIA support" > + depends NET_VENDOR_SMSC && PCMCIA > + select CRC32 > + select MII > + ---help--- > + Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA > + (PC-card) Ethernet or Fast Ethernet card to your computer. > + > + To compile this driver as a module, choose M here: the module will be > + called smc91c92_cs. If unsure, say N. > + > +config EPIC100 > + tristate "SMC EtherPower II" > + depends on NET_VENDOR_SMSC && PCI > + select CRC32 > + select MII > + ---help--- > + This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, > + which is based on the SMC83c17x (EPIC/100). > + More specific information and updates are available from > + . > + > +config SMC911X > + tristate "SMSC LAN911[5678] support" > + select CRC32 > + select MII > + depends on NET_VENDOR_SMSC && (ARM || SUPERH || MN10300) > + ---help--- > + This is a driver for SMSC's LAN911x series of Ethernet chipsets > + including the new LAN9115, LAN9116, LAN9117, and LAN9118. > + Say Y if you want it compiled into the kernel, > + and read the Ethernet-HOWTO, available from > + . > + > + This driver is also available as a module. The module will be > + called smc911x. If you want to compile it as a module, say M > + here and read > + > +config SMSC911X > + tristate "SMSC LAN911x/LAN921x families embedded ethernet support" > + depends on NET_VENDOR_SMSC && (ARM || SUPERH || BLACKFIN || \ > + MIPS || MN10300) > + select CRC32 > + select MII > + select PHYLIB > + ---help--- > + Say Y here if you want support for SMSC LAN911x and LAN921x families > + of ethernet controllers. > + > + To compile this driver as a module, choose M here and read > + . The module > + will be called smsc911x. > + > +config SMSC911X_ARCH_HOOKS > + def_bool n > + depends on SMSC911X > + ---help--- > + If the arch enables this, it allows the arch to implement various > + hooks for more comprehensive interrupt control and also to override > + the source of the MAC address. > + > +config SMSC9420 > + tristate "SMSC LAN9420 PCI ethernet adapter support" > + depends on NET_VENDOR_SMSC && PCI > + select CRC32 > + select PHYLIB > + select SMSC_PHY > + ---help--- > + This is a driver for SMSC's LAN9420 PCI ethernet adapter. > + Say Y if you want it compiled into the kernel, > + and read the Ethernet-HOWTO, available from > + . > + > + This driver is also available as a module. The module will be > + called smsc9420. If you want to compile it as a module, say M > + here and read > diff --git a/drivers/net/ethernet/smsc/Makefile b/drivers/net/ethernet/smsc/Makefile > new file mode 100644 > index 0000000..f3438de > --- /dev/null > +++ b/drivers/net/ethernet/smsc/Makefile > @@ -0,0 +1,11 @@ > +# > +# Makefile for the SMSC network device drivers. > +# > + > +obj-$(CONFIG_SMC9194) += smc9194.o > +obj-$(CONFIG_SMC91X) += smc91x.o > +obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o > +obj-$(CONFIG_EPIC100) += epic100.o > +obj-$(CONFIG_SMSC9420) += smsc9420.o > +obj-$(CONFIG_SMC911X) += smc911x.o > +obj-$(CONFIG_SMSC911X) += smsc911x.o > diff --git a/drivers/net/epic100.c b/drivers/net/ethernet/smsc/epic100.c > similarity index 100% > rename from drivers/net/epic100.c > rename to drivers/net/ethernet/smsc/epic100.c > diff --git a/drivers/net/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c > similarity index 100% > rename from drivers/net/smc911x.c > rename to drivers/net/ethernet/smsc/smc911x.c > diff --git a/drivers/net/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h > similarity index 100% > rename from drivers/net/smc911x.h > rename to drivers/net/ethernet/smsc/smc911x.h > diff --git a/drivers/net/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c > similarity index 100% > rename from drivers/net/smc9194.c > rename to drivers/net/ethernet/smsc/smc9194.c > diff --git a/drivers/net/smc9194.h b/drivers/net/ethernet/smsc/smc9194.h > similarity index 100% > rename from drivers/net/smc9194.h > rename to drivers/net/ethernet/smsc/smc9194.h > diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/ethernet/smsc/smc91c92_cs.c > similarity index 100% > rename from drivers/net/pcmcia/smc91c92_cs.c > rename to drivers/net/ethernet/smsc/smc91c92_cs.c > diff --git a/drivers/net/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c > similarity index 100% > rename from drivers/net/smc91x.c > rename to drivers/net/ethernet/smsc/smc91x.c > diff --git a/drivers/net/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h > similarity index 100% > rename from drivers/net/smc91x.h > rename to drivers/net/ethernet/smsc/smc91x.h > diff --git a/drivers/net/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c > similarity index 100% > rename from drivers/net/smsc911x.c > rename to drivers/net/ethernet/smsc/smsc911x.c > diff --git a/drivers/net/smsc911x.h b/drivers/net/ethernet/smsc/smsc911x.h > similarity index 100% > rename from drivers/net/smsc911x.h > rename to drivers/net/ethernet/smsc/smsc911x.h > diff --git a/drivers/net/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c > similarity index 100% > rename from drivers/net/smsc9420.c > rename to drivers/net/ethernet/smsc/smsc9420.c > diff --git a/drivers/net/smsc9420.h b/drivers/net/ethernet/smsc/smsc9420.h > similarity index 100% > rename from drivers/net/smsc9420.h > rename to drivers/net/ethernet/smsc/smsc9420.h > diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig > index 72aa257..f5a738f 100644 > --- a/drivers/net/pcmcia/Kconfig > +++ b/drivers/net/pcmcia/Kconfig > @@ -31,17 +31,6 @@ config PCMCIA_FMVJ18X > To compile this driver as a module, choose M here: the module will be > called fmvj18x_cs. If unsure, say N. > > -config PCMCIA_SMC91C92 > - tristate "SMC 91Cxx PCMCIA support" > - select CRC32 > - select MII > - help > - Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA > - (PC-card) Ethernet or Fast Ethernet card to your computer. > - > - To compile this driver as a module, choose M here: the module will be > - called smc91c92_cs. If unsure, say N. > - > config PCMCIA_XIRC2PS > tristate "Xircom 16-bit PCMCIA support" > help > diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile > index c2b8b44..f9c9883 100644 > --- a/drivers/net/pcmcia/Makefile > +++ b/drivers/net/pcmcia/Makefile > @@ -4,7 +4,6 @@ > > # 16-bit client drivers > obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o > -obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o > obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o > obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o > > -- > 1.7.6 >