From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anirban Chakraborty Subject: [PATCH 1/9 net-next-2.6] qlcnic: make PCI info available in all modes Date: Wed, 30 Mar 2011 13:21:36 -0700 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 8BIT Cc: Dept_NX_Linux_NIC_Driver To: David Miller , "netdev@vger.kernel.org" Return-path: Received: from db3ehsobe006.messaging.microsoft.com ([213.199.154.144]:5004 "EHLO DB3EHSOBE006.bigfish.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932268Ab1C3UXo convert rfc822-to-8bit (ORCPT ); Wed, 30 Mar 2011 16:23:44 -0400 Sender: netdev-owner@vger.kernel.org List-ID: From: Sony Chacko Before this fix, PCI info was available only when multiple NIC functions were present on a port. Signed-off-by: Sony Chacko Signed-off-by: Anirban Chakraborty --- drivers/net/qlcnic/qlcnic_main.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c index cd88c7e..d230fdd 100644 --- a/drivers/net/qlcnic/qlcnic_main.c +++ b/drivers/net/qlcnic/qlcnic_main.c @@ -3954,14 +3954,14 @@ qlcnic_create_diag_entries(struct qlcnic_adapter *adapter) dev_info(dev, "failed to create crb sysfs entry\n"); if (device_create_bin_file(dev, &bin_attr_mem)) dev_info(dev, "failed to create mem sysfs entry\n"); + if (device_create_bin_file(dev, &bin_attr_pci_config)) + dev_info(dev, "failed to create pci config sysfs entry"); if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) return; if (device_create_bin_file(dev, &bin_attr_esw_config)) dev_info(dev, "failed to create esw config sysfs entry"); if (adapter->op_mode != QLCNIC_MGMT_FUNC) return; - if (device_create_bin_file(dev, &bin_attr_pci_config)) - dev_info(dev, "failed to create pci config sysfs entry"); if (device_create_bin_file(dev, &bin_attr_npar_config)) dev_info(dev, "failed to create npar config sysfs entry"); if (device_create_bin_file(dev, &bin_attr_pm_config)) @@ -3982,12 +3982,12 @@ qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter) device_remove_file(dev, &dev_attr_diag_mode); device_remove_bin_file(dev, &bin_attr_crb); device_remove_bin_file(dev, &bin_attr_mem); + device_remove_bin_file(dev, &bin_attr_pci_config); if (!(adapter->flags & QLCNIC_ESWITCH_ENABLED)) return; device_remove_bin_file(dev, &bin_attr_esw_config); if (adapter->op_mode != QLCNIC_MGMT_FUNC) return; - device_remove_bin_file(dev, &bin_attr_pci_config); device_remove_bin_file(dev, &bin_attr_npar_config); device_remove_bin_file(dev, &bin_attr_pm_config); device_remove_bin_file(dev, &bin_attr_esw_stats); -- 1.6.5.2 This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.