From: Nikolay Aleksandrov <razor@blackwall.org>
To: Baul Lee <baul.lee@xbow.com>
Cc: netdev@vger.kernel.org, bridge@lists.linux.dev,
linux-kernel@vger.kernel.org, idosch@nvidia.com,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, horms@kernel.org,
federico.kirschbaum@xbow.com, stable@vger.kernel.org
Subject: Re: [PATCH net] net: bridge: mrp: fix uninitialised bytes on the wire
Date: Sun, 26 Jul 2026 12:54:33 +0300 [thread overview]
Message-ID: <amXZWTkZK7EYVwbh@penguin> (raw)
In-Reply-To: <20260726062518.43774-1-baul.lee@xbow.com>
On Sun, Jul 26, 2026 at 03:25:18PM +0900, Baul Lee wrote:
> br_mrp_alloc_test_skb() builds MRP test frames on an skb from
> dev_alloc_skb(), which does not zero the linear data area. On the MRA
> ring-role branch the sub-option TLV header is appended with
>
> sub_tlv = skb_put(skb, sizeof(*sub_tlv));
> sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR;
>
> leaving sub_tlv->length unwritten, and the two trailing alignment bytes
> are appended with a bare skb_put() that neither writes nor clears them.
> The surrounding oui and sub_opt regions are explicitly memset(0), which
> bounds the exposure to exactly these three bytes.
>
> Every MRA MRP_Test frame therefore carries three bytes of stale
> page-allocator memory, at frame offsets 65 to 67, to any observer of the
> MRP control traffic. A capture on a kernel without
> CONFIG_INIT_ON_ALLOC_DEFAULT_ON shows those bytes varying frame to frame
> and, after a page-allocator spray, carrying the sprayed pattern; the
> same reproducer on an otherwise identical CONFIG_INIT_ON_ALLOC_DEFAULT_ON
> kernel leaks nothing, confirming the source is uninitialised allocation
> memory. Reaching it needs CAP_NET_ADMIN, which is self-satisfiable on a
> stock kernel through unprivileged user and network namespaces.
Drop this entire unnecessary paragraph (slop).
>
> Assign the sub-option TLV length explicitly, which is 0 as the AUTO_MGR
> sub-TLV carries no payload, and append the alignment padding with
> skb_put_zero().
>
> Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
>
> Fixes: f7458934b079 ("net: bridge: mrp: Update the Test frames for MRA")
> Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
> Reported-by: Baul Lee <baul.lee@xbow.com>
You don't need a reported-by tag since you've already signed off
the patch.
> Cc: stable@vger.kernel.org
> Signed-off-by: Baul Lee <baul.lee@xbow.com>
> ---
> net/bridge/br_mrp.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/net/bridge/br_mrp.c b/net/bridge/br_mrp.c
> index 3f7126a7d720..a5548f475604 100644
> --- a/net/bridge/br_mrp.c
> +++ b/net/bridge/br_mrp.c
> @@ -226,9 +226,10 @@ static struct sk_buff *br_mrp_alloc_test_skb(struct br_mrp *mrp,
>
> sub_tlv = skb_put(skb, sizeof(*sub_tlv));
if you use skb_put_zero here, you can drop the explicit zeroing below,
in fact you can add the MRP_OPT_PADDING as well and move the comment
above it then drop the second skb_put_zero entirely
> sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR;
> + sub_tlv->length = 0x0;
>
> /* 32 bit alligment shall be ensured therefore add 2 bytes */
> - skb_put(skb, MRP_OPT_PADDING);
> + skb_put_zero(skb, MRP_OPT_PADDING);
> }
>
> br_mrp_skb_tlv(skb, BR_MRP_TLV_HEADER_END, 0x0);
> --
> 2.50.1 (Apple Git-155)
>
prev parent reply other threads:[~2026-07-26 9:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-26 6:25 [PATCH net] net: bridge: mrp: fix uninitialised bytes on the wire Baul Lee
2026-07-26 9:54 ` Nikolay Aleksandrov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=amXZWTkZK7EYVwbh@penguin \
--to=razor@blackwall.org \
--cc=baul.lee@xbow.com \
--cc=bridge@lists.linux.dev \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=federico.kirschbaum@xbow.com \
--cc=horms@kernel.org \
--cc=idosch@nvidia.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox