From: Breno Leitao <leitao@debian.org>
To: Gustavo Luiz Duarte <gustavold@gmail.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>, Simon Horman <horms@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next 2/4] netconsole: use the address family instead of the ipv6 flag
Date: Thu, 6 Aug 2026 08:55:51 -0700 [thread overview]
Message-ID: <anSte7-WkTYU4MnC@gmail.com> (raw)
In-Reply-To: <20260805-netcons_ipv6-v1-2-170a35b92da1@gmail.com>
On Wed, Aug 05, 2026 at 10:33:02PM +0100, Gustavo Luiz Duarte wrote:
> Now that we have the address family in inet_addr, use that and remove
> nt->ipv6.
>
> We no longer need netcons_local_ip_unset() to check that all bytes are
> zeroes, as that is now denoted by (family == AF_UNSPEC).
>
> Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
> ---
> drivers/net/netconsole.c | 82 ++++++++++++++----------------------------------
> 1 file changed, 23 insertions(+), 59 deletions(-)
>
> diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
> index d615a9256787..070bae7b4fd7 100644
> --- a/drivers/net/netconsole.c
> +++ b/drivers/net/netconsole.c
> @@ -181,7 +181,6 @@ enum target_state {
> * local_mac (read-only)
> * @local_ip: Source IP address of the target (read-write).
> * @remote_ip: Destination IP address of the target (read-write).
> - * @ipv6: Whether the target addresses are IPv6 (read-write).
> * @local_port: Source UDP port of the target (read-write).
> * @remote_port: Destination UDP port of the target (read-write).
> * @remote_mac: Destination ethernet address of the target (read-write).
> @@ -213,7 +212,6 @@ struct netconsole_target {
> bool release;
> struct netpoll np;
> struct inet_addr local_ip, remote_ip;
> - bool ipv6;
> u16 local_port, remote_port;
> u8 remote_mac[ETH_ALEN];
> /* protected by target_list_lock; +1 gives scnprintf() room for its
> @@ -463,23 +461,6 @@ static int netcons_take_ipv4(struct netconsole_target *nt,
> return 0;
> }
>
> -/*
> - * Test whether the caller left nt->local_ip unset, so that
> - * netcons_netpoll_setup() should auto-populate it from the egress device.
> - *
> - * nt->local_ip is a union of __be32 (IPv4) and struct in6_addr (IPv6),
> - * so an IPv6 address whose first 4 bytes are zero (e.g. ::1, ::2,
> - * IPv4-mapped ::ffff:a.b.c.d) must not be tested via the IPv4 arm —
> - * doing so would misclassify a caller-supplied address as unset and
> - * silently overwrite it with whatever address the device exposes.
> - */
> -static bool netcons_local_ip_unset(const struct netconsole_target *nt)
> -{
> - if (nt->ipv6)
> - return ipv6_addr_any(&nt->local_ip.in6);
> - return !nt->local_ip.ip;
> -}
> -
> static int netcons_netpoll_setup(struct netconsole_target *nt)
> {
> struct net *net = current->nsproxy->net_ns;
> @@ -525,16 +506,13 @@ static int netcons_netpoll_setup(struct netconsole_target *nt)
> rtnl_lock();
> }
>
> - if (netcons_local_ip_unset(nt)) {
> - if (!nt->ipv6) {
> - err = netcons_take_ipv4(nt, ndev);
> - if (err)
> - goto put;
> - } else {
> + if (nt->local_ip.family == AF_UNSPEC) {
> + if (nt->remote_ip.family == AF_INET6)
> err = netcons_take_ipv6(nt, ndev);
> - if (err)
> - goto put;
> - }
> + else
> + err = netcons_take_ipv4(nt, ndev);
> + if (err)
> + goto put;
nice, that is much clearer.
> ip_overwritten = true;
> }
>
> @@ -716,22 +694,22 @@ static void netconsole_print_banner(struct netconsole_target *nt)
> struct netpoll *np = &nt->np;
>
> np_info(np, "local port %d\n", nt->local_port);
> - if (nt->ipv6)
> + if (nt->local_ip.family == AF_INET6)
> np_info(np, "local IPv6 address %pI6c\n", &nt->local_ip.in6);
> else
> np_info(np, "local IPv4 address %pI4\n", &nt->local_ip.ip);
Any chance it can be UNSPEC?
> np_info(np, "interface name '%s'\n", np->dev_name);
> np_info(np, "local ethernet address '%pM'\n", np->dev_mac);
> np_info(np, "remote port %d\n", nt->remote_port);
> - if (nt->ipv6)
> + if (nt->remote_ip.family == AF_INET6)
> np_info(np, "remote IPv6 address %pI6c\n", &nt->remote_ip.in6);
> else
Same question
> @@ -755,7 +733,7 @@ static int netpoll_parse_ip_addr(const char *str, struct inet_addr *addr)
> in6_pton(str, len, (void *)&addr->in6, -1, &end) > 0 &&
> (!end || *end == 0 || *end == '\n')) {
> addr->family = AF_INET6;
Why not setting family for for IPV4? In
if (in4_pton(str, len, (void *)addr, -1, &end) > 0 &&
(!end || *end == 0 || *end == '\n'))
return 0;
next prev parent reply other threads:[~2026-08-06 15:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-05 21:33 [PATCH net-next 0/4] netconsole: validate a target's IP address configuration Gustavo Luiz Duarte
2026-08-05 21:33 ` [PATCH net-next 1/4] netconsole: add an address family to struct inet_addr Gustavo Luiz Duarte
2026-08-06 15:49 ` Breno Leitao
2026-08-07 11:21 ` Gustavo Luiz Duarte
2026-08-05 21:33 ` [PATCH net-next 2/4] netconsole: use the address family instead of the ipv6 flag Gustavo Luiz Duarte
2026-08-06 15:55 ` Breno Leitao [this message]
2026-08-07 12:00 ` Gustavo Luiz Duarte
2026-08-07 13:11 ` Breno Leitao
2026-08-05 21:33 ` [PATCH net-next 3/4] netconsole: reject enabling a target with no remote IP address Gustavo Luiz Duarte
2026-08-06 15:58 ` Breno Leitao
2026-08-07 12:11 ` Gustavo Luiz Duarte
2026-08-05 21:33 ` [PATCH net-next 4/4] netconsole: reject a target mixing IPv4 and IPv6 addresses Gustavo Luiz Duarte
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=anSte7-WkTYU4MnC@gmail.com \
--to=leitao@debian.org \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gustavold@gmail.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox