From: Hangbin Liu <hangbin.liu@linux.dev>
To: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: netdev@vger.kernel.org, "(JC),
Jayachandran" <j-rameshbabu@ti.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
Chintan Vankar <c-vankar@ti.com>,
Danish Anwar <danishanwar@ti.com>, Daolin Qiu <d-qiu@ti.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Felix Maurer <fmaurer@redhat.com>,
Jakub Kicinski <kuba@kernel.org>,
Neelima Muralidharan <neelima@ti.com>,
Paolo Abeni <pabeni@redhat.com>,
Praneeth Bajjuri <praneeth@ti.com>,
Pratheesh Gangadhar TK <pratheesh@ti.com>,
Richard Cochran <richardcochran@gmail.com>,
Simon Horman <horms@kernel.org>,
Vignesh Raghavendra <vigneshr@ti.com>,
Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Subject: Re: [PATCH net-next v6 8/8] selftests: hsr: Add test for the inline PTP header on HSR
Date: Thu, 24 Sep 2026 10:08:32 +0800 [thread overview]
Message-ID: <arSGILQLfqYGugpy@fedora> (raw)
In-Reply-To: <20260923-hsr_ptp-v6-8-6ea07b3fb8a8@linutronix.de>
Hi Sebastian,
On Wed, Sep 23, 2026 at 02:14:09PM +0200, Sebastian Andrzej Siewior wrote:
> This test verifies the inline header which is used by HSR stack with the
> ether type ETH_P_1588.
> The HSR stack needs to recognize this header, strip it and send the
> requested packet only on the requested port.
>
> This test needs a HSR device and the two slave devices passed. It will
> will send a sample PTP packet with this inline header, requesting one of
> the ports combining with and without the HSR header. A total of four
> packets is sent.
> The test checks both ports devices for packets and complains if the
> packet was not observed on the expected port and/ or observed on the
> other port. The received content of the data is compared against the
> send data sample.
>
> Test suggested by Felix Maurer.
>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---
> tools/testing/selftests/net/hsr/.gitignore | 1 +
> tools/testing/selftests/net/hsr/Makefile | 5 +
> tools/testing/selftests/net/hsr/hsr_ptp.sh | 109 ++++++
> tools/testing/selftests/net/hsr/hsr_ptp_test.c | 495 +++++++++++++++++++++++++
> 4 files changed, 610 insertions(+)
>
> diff --git a/tools/testing/selftests/net/hsr/.gitignore b/tools/testing/selftests/net/hsr/.gitignore
> new file mode 100644
> index 0000000000000..849eecb84c974
> --- /dev/null
> +++ b/tools/testing/selftests/net/hsr/.gitignore
> @@ -0,0 +1 @@
> +hsr_ptp_test
> diff --git a/tools/testing/selftests/net/hsr/Makefile b/tools/testing/selftests/net/hsr/Makefile
> index 2150e487ac7d7..5d0134ead65d7 100644
> --- a/tools/testing/selftests/net/hsr/Makefile
> +++ b/tools/testing/selftests/net/hsr/Makefile
> @@ -2,14 +2,19 @@
>
> top_srcdir = ../../../../..
>
> +CFLAGS += -Wall -Wl,--no-as-needed -O2 -g
> +
> TEST_PROGS := \
> hsr_ping.sh \
> hsr_prp_redbox.sh \
> hsr_redbox.sh \
> link_faults.sh \
> prp_ping.sh \
> + hsr_ptp.sh \
> # end of TEST_PROGS
If there is a new version. Please sort the test with alphabet order.
>
> TEST_FILES += hsr_common.sh
>
> +TEST_GEN_FILES := hsr_ptp_test
> +
> include ../../lib.mk
> diff --git a/tools/testing/selftests/net/hsr/hsr_ptp.sh b/tools/testing/selftests/net/hsr/hsr_ptp.sh
> new file mode 100755
> index 0000000000000..034c635916f81
> --- /dev/null
> +++ b/tools/testing/selftests/net/hsr/hsr_ptp.sh
> @@ -0,0 +1,109 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +
> +ipv6=false
> +
> +source ./hsr_common.sh
> +
> +optstring="h4"
> +usage() {
> + echo "Usage: $0"
> +}
> +
> +while getopts "$optstring" option;do
> + case "$option" in
> + "h")
> + usage $0
usage "$0"
> + exit 0
> + ;;
> + "?")
> + usage $0
> + exit 1
> + ;;
Thanks
Hangbin
next prev parent reply other threads:[~2026-09-24 2:08 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-23 12:14 [PATCH net-next v6 0/8] hsr: Add additional info to send/ receive skbs Sebastian Andrzej Siewior
2026-09-23 12:14 ` [PATCH net-next v6 1/8] hsr: Add header_ops::parse_protocol Sebastian Andrzej Siewior
2026-09-27 13:24 ` netdev-bot+sashiko
2026-09-23 12:14 ` [PATCH net-next v6 2/8] hsr: Use skb_clone() while adding the HSR header Sebastian Andrzej Siewior
2026-09-27 13:24 ` netdev-bot+sashiko
2026-09-23 12:14 ` [PATCH net-next v6 3/8] hsr: Add a magic header for sending PTP packets Sebastian Andrzej Siewior
2026-09-27 13:24 ` netdev-bot+sashiko
2026-09-23 12:14 ` [PATCH net-next v6 4/8] hsr: Drop received " Sebastian Andrzej Siewior
2026-09-27 13:24 ` netdev-bot+sashiko
2026-09-23 12:14 ` [PATCH net-next v6 5/8] hsr: Use the port and header information in hsr_forward_skb() Sebastian Andrzej Siewior
2026-09-27 13:24 ` netdev-bot+sashiko
2026-09-23 12:14 ` [PATCH net-next v6 6/8] hsr: Assign a socket for cloned skbs Sebastian Andrzej Siewior
2026-09-27 13:24 ` netdev-bot+sashiko
2026-09-23 12:14 ` [PATCH net-next v6 7/8] hsr: Move struct hsr_ethhdr to a global header Sebastian Andrzej Siewior
2026-09-23 12:14 ` [PATCH net-next v6 8/8] selftests: hsr: Add test for the inline PTP header on HSR Sebastian Andrzej Siewior
2026-09-24 2:08 ` Hangbin Liu [this message]
2026-09-27 13:24 ` netdev-bot+sashiko
2026-09-25 10:07 ` [PATCH net-next v6 0/8] hsr: Add additional info to send/ receive skbs Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=arSGILQLfqYGugpy@fedora \
--to=hangbin.liu@linux.dev \
--cc=andrew+netdev@lunn.ch \
--cc=bigeasy@linutronix.de \
--cc=c-vankar@ti.com \
--cc=d-qiu@ti.com \
--cc=danishanwar@ti.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fmaurer@redhat.com \
--cc=horms@kernel.org \
--cc=j-rameshbabu@ti.com \
--cc=kuba@kernel.org \
--cc=neelima@ti.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=praneeth@ti.com \
--cc=pratheesh@ti.com \
--cc=richardcochran@gmail.com \
--cc=vigneshr@ti.com \
--cc=willemdebruijn.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox