From: Steffen Klassert <steffen.klassert@secunet.com>
To: Cen Zhang <zzzccc427@gmail.com>
Cc: <herbert@gondor.apana.org.au>, <davem@davemloft.net>,
<netdev@vger.kernel.org>, <baijiaju1990@gmail.com>,
<jjzuming@gmail.com>
Subject: Re: [PATCH ipsec] xfrm: keep the mode module pinned until destroy_state returns
Date: Fri, 6 Nov 2026 08:50:17 +0100 [thread overview]
Message-ID: <au2GuZzD5np1nwiY@gauss4> (raw)
In-Reply-To: <pm-xfrm-core-objects-candidate-0003-v3-3f3e13b81234df0bb10f@gmail.com>
On Thu, Oct 29, 2026 at 11:19:11AM +0800, Cen Zhang wrote:
> An IPTFS state keeps its mode module referenced while mode_data exists.
> However, iptfs_destroy_state() drops that reference before returning to
> xfrm_state_gc_destroy(), which has no reference covering the callback's
> return path.
>
> With CONFIG_XFRM_IPTFS=m and module unloading enabled, deleting the last
> IPTFS SA can overlap with ordinary module removal in this order:
>
> XFRM GC worker rmmod xfrm_iptfs
> iptfs_destroy_state()
> free mode_data
> module_put(owner)
> <preempted>
> delete_module()
> xfrm_iptfs_fini()
> unregister mode callbacks
> free_module()
> resume in freed module text
>
> An unload started after the put can finish before the callback resumes.
> GC invokes the callback outside an RCU read-side critical section, after
> its grace period. The RCU waits in mode unregistration and module
> freeing therefore do not protect the callback. The GC mutex only
> serializes GC with device state flushes. Resuming the callback can cause
> an instruction-fetch fault in the freed module text.
>
> The Oops below was observed on an earlier kernel with scheduling probes
> holding the worker in module_put() after the decrement until ordinary
> rmmod completed. The fixture created and deleted the SA over
> NETLINK_XFRM.
>
> Take an additional reference to the already pinned owner before calling
> destroy_state(), and release it in XFRM core after the callback returns.
> Cache the owner before the call so releasing the extra reference does
> not need to access the callback table after the callback has finished.
>
> Oops report as below:
> BUG: unable to handle page fault for address: ffffffffc0407455
> #PF: supervisor instruction fetch in kernel mode
> #PF: error_code(0x0010) - not-present page
> PGD 80a9067 P4D 80a9067 PUD 80ab067 PMD 0
> Oops: Oops: 0010 [#1] SMP KASAN NOPTI
> CPU: 3 UID: 0 PID: 53 Comm: kworker/3:1 Not tainted 7.2.0-rc5-pmb-xfrm-functional-v1+ #11 PREEMPT(lazy)
> Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
> Workqueue: events xfrm_state_gc_task
> RIP: 0010:0xffffffffc0407455
> Code: Unable to access opcode bytes at 0xffffffffc040742b.
> RSP: 0018:ffff8881013e7aa0 EFLAGS: 00010282
> RAX: 0000000000000000 RBX: ffffffffc02199c0 RCX: ffffffff816fc84e
> RDX: ffff8881013c0000 RSI: 0000000000000000 RDI: ffffffff86338344
> RBP: ffff8881013e7ba8 R08: 0000000000000001 R09: 0000000000000001
> R10: ffffffff893e0257 R11: ffff8881013c0000 R12: ffff888107e9ec00
> R13: ffff888102b07980 R14: ffff888107412ec0 R15: ffff8881013e7ae0
> FS: 0000000000000000(0000) GS:ffff8881fd929000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: ffffffffc040742b CR3: 00000000080a6006 CR4: 0000000000770ef0
> PKRU: 55555554
> Call Trace:
> <TASK>
> ? pmbd_gate_maybe+0x47/0x60
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? lock_is_held_type+0x8f/0x100
> xfrm_state_gc_task+0x17e/0x790
> ? lock_acquire+0x17b/0x2f0
> ? __pfx_xfrm_state_gc_task+0x10/0x10
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? lock_release+0xc8/0x280
> ? srso_alias_return_thunk+0x5/0xfbef5
> process_one_work+0x908/0x19c0
> ? __pfx_process_one_work+0x10/0x10
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? lock_is_held_type+0x8f/0x100
> ? srso_alias_return_thunk+0x5/0xfbef5
> worker_thread+0x65c/0xe40
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? __kthread_parkme+0x175/0x220
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? __pfx_worker_thread+0x10/0x10
> kthread+0x34f/0x460
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? __pfx_kthread+0x10/0x10
> ret_from_fork+0x659/0x940
> ? __pfx_ret_from_fork+0x10/0x10
> ? srso_alias_return_thunk+0x5/0xfbef5
> ? __switch_to+0x74f/0xf80
> ? __pfx_kthread+0x10/0x10
> ret_from_fork_asm+0x1a/0x30
> </TASK>
> Modules linked in: [last unloaded: xfrm_iptfs]
> CR2: ffffffffc0407455
> ---[ end trace 0000000000000000 ]---
> RIP: 0010:0xffffffffc0407455
> Code: Unable to access opcode bytes at 0xffffffffc040742b.
> RSP: 0018:ffff8881013e7aa0 EFLAGS: 00010282
> RAX: 0000000000000000 RBX: ffffffffc02199c0 RCX: ffffffff816fc84e
> RDX: ffff8881013c0000 RSI: 0000000000000000 RDI: ffffffff86338344
> RBP: ffff8881013e7ba8 R08: 0000000000000001 R09: 0000000000000001
> R10: ffffffff893e0257 R11: ffff8881013c0000 R12: ffff888107e9ec00
> R13: ffff888102b07980 R14: ffff888107412ec0 R15: ffff8881013e7ae0
> FS: 0000000000000000(0000) GS:ffff8881fd929000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: ffffffffc040742b CR3: 00000000080a6006 CR4: 0000000000770ef0
> PKRU: 55555554
> Kernel panic - not syncing: Fatal exception
> Kernel Offset: disabled
>
> Fixes: 4b3faf610cc6 ("xfrm: iptfs: add new iptfs xfrm mode impl")
> Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
> Assisted-by: LLM
Applied, thanks a lot!
prev parent reply other threads:[~2026-11-06 7:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-29 3:19 [PATCH ipsec] xfrm: keep the mode module pinned until destroy_state returns Cen Zhang
2026-10-29 6:46 ` Leon Romanovsky
2026-11-06 7:50 ` Steffen Klassert [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=au2GuZzD5np1nwiY@gauss4 \
--to=steffen.klassert@secunet.com \
--cc=baijiaju1990@gmail.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=jjzuming@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=zzzccc427@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox