Netdev List
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
To: James Clark <jjc@jclark.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Richard Cochran <richardcochran@gmail.com>,
	Jacob Keller <jacob.e.keller@intel.com>,
	Kory Maincent <kory.maincent@bootlin.com>,
	netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH net] net: stmmac: ptp: fix support for PTP_EXTTS_REQUEST2 ioctl
Date: Wed, 4 Nov 2026 10:06:38 +0100	[thread overview]
Message-ID: <aur1nsTkMRiws3ff@lore-desk> (raw)
In-Reply-To: <20261104052504.1886335-1-jjc@jclark.com>

[-- Attachment #1: Type: text/plain, Size: 2491 bytes --]

> Commit 7c571ac57d9d ("net: ptp: introduce .supported_extts_flags to
> ptp_clock_info") modified the PTP core to validate the supported flags
> of external timestamp requests, rather than relying on each driver to
> check them.
> 
> stmmac_enable() and dwmac1000_ptp_enable() ignore the flags, and
> neither stmmac_ptp_clock_ops nor dwmac1000_ptp_clock_ops was given any
> .supported_extts_flags. Since PTP_EXTTS_REQUEST2 always implies
> PTP_STRICT_FLAGS, the core now rejects every PTP_EXTTS_REQUEST2 for
> this driver with -EOPNOTSUPP, where before that commit the same
> requests succeeded. Only the PTP_EXTTS_REQUEST ioctl still works.
> 
> Tests on an NXP i.MX 8M Plus (FRDM-IMX8MPLUS, GMAC 5.10a) show that the
> auxiliary snapshot inputs timestamp just the rising edge. The reference
> manuals for the STM32MP13 (GMAC 4.20a) and the Cyclone V HPS (GMAC
> 3.70a, which uses dwmac1000_ptp_clock_ops) say the same.
> 
> Encode this in .supported_extts_flags. A PTP_EXTTS_REQUEST2 for the
> rising edge then succeeds, and one for the falling edge or for both
> edges fails with -EOPNOTSUPP.
> 
> Fixes: 7c571ac57d9d ("net: ptp: introduce .supported_extts_flags to ptp_clock_info")
> Cc: stable@vger.kernel.org
> Signed-off-by: James Clark <jjc@jclark.com>

Reviewed-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>

> ---
> I used an LLM coding assistant to help prepare this patch.
> 
>  drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> index a37405534beb..31a66e855d6b 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
> @@ -277,6 +277,7 @@ const struct ptp_clock_info stmmac_ptp_clock_ops = {
>  	.n_per_out = 0, /* will be overwritten in stmmac_ptp_register */
>  	.n_pins = 0,
>  	.pps = 0,
> +	.supported_extts_flags = PTP_RISING_EDGE | PTP_STRICT_FLAGS,
>  	.adjfine = stmmac_adjust_freq,
>  	.adjtime = stmmac_adjust_time,
>  	.gettimex64 = stmmac_get_timex,
> @@ -294,6 +295,7 @@ const struct ptp_clock_info dwmac1000_ptp_clock_ops = {
>  	.n_per_out = 0,
>  	.n_pins = 0,
>  	.pps = 0,
> +	.supported_extts_flags = PTP_RISING_EDGE | PTP_STRICT_FLAGS,
>  	.adjfine = stmmac_adjust_freq,
>  	.adjtime = stmmac_adjust_time,
>  	.gettimex64 = stmmac_get_timex,
> -- 
> 2.56.0
> 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

  parent reply	other threads:[~2026-11-04  9:06 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-04  5:25 [PATCH net] net: stmmac: ptp: fix support for PTP_EXTTS_REQUEST2 ioctl James Clark
2026-11-04  8:58 ` Maxime Chevallier
2026-11-04 21:12   ` Jacob Keller
2026-11-04  9:06 ` Lorenzo Bianconi [this message]
2026-11-04  9:26 ` Kory Maincent

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aur1nsTkMRiws3ff@lore-desk \
    --to=lorenzo.bianconi@oss.qualcomm.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=jacob.e.keller@intel.com \
    --cc=jjc@jclark.com \
    --cc=kory.maincent@bootlin.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox