Netdev List
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
To: Maxime Chevallier <maxime.chevallier@bootlin.com>
Cc: James Hilliard <james.hilliard1@gmail.com>,
	netdev@vger.kernel.org, Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Giuseppe CAVALLARO <peppe.cavallaro@st.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH net] net: stmmac: preserve RX checksum capability when offload is disabled
Date: Tue, 17 Nov 2026 21:34:35 +0100	[thread overview]
Message-ID: <avy6WxJft6Aex-oX@lore-qca> (raw)
In-Reply-To: <630b9651-3963-4686-a51b-b670beaa45bb@bootlin.com>

[-- Attachment #1: Type: text/plain, Size: 1652 bytes --]

> Hi James,
> 
> On 11/16/26 01:49, James Hilliard wrote:
> > The GMAC, GMAC4 and XGMAC rx_ipc callbacks return whether checksum offload
> > is enabled after programming the requested state. A zero return is
> > therefore expected when hw->rx_csum is zero.
> > 
> > stmmac_hw_setup() treats every zero return as a lack of hardware support
> > and clears plat->rx_coe. Disabling RX checksum offload with ethtool and
> > then reopening the interface loses the saved capability. Subsequent
> > attempts to enable offload are rejected by stmmac_fix_features(), which
> > uses plat->rx_coe to filter NETIF_F_RXCSUM.
> > 
> > Only clear the capability if offload was requested but could not be
> > enabled. Keep calling rx_ipc when offload is disabled so that the hardware
> > is still programmed with the requested state.
> > 
> > Fixes: 0f280e4d23c2 ("stmmac: fix the rx csum feature")
> 
> This tag doesn't exist :
> 
> https://netdev-ctrl.bots.linux.dev/logview.html?f=/logs/build/1212156/14986330/verify_fixes/stdout
> 
> Besides that, this is legit. Tested on AgileX5, CycloneV and stm32mp1:
> 
> ip l s eth0 up
> ethtool -K eth0 rx off
> ip l s eth0 down;
> ip l s eth0 up
> ethtool -K eth0 rx on
> 
> Without patch:
> ethtool -k eth0 => rx-checksumming off
> 
> With:
> ethtool -k eth0 => rx-checksumming on
> 
> Please respin with a correct Fixes, feel free to add :
> 
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> 
> Maxime
> 
> pw-bot: cr
> 
> 

Reviewed-by:Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

      reply	other threads:[~2026-11-17 20:34 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-16  0:49 [PATCH net] net: stmmac: preserve RX checksum capability when offload is disabled James Hilliard
2026-11-16  0:53 ` netdev-bot+sinfo
2026-11-16  2:23   ` James Hilliard
2026-11-17 15:50 ` Maxime Chevallier
2026-11-17 20:34   ` Lorenzo Bianconi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=avy6WxJft6Aex-oX@lore-qca \
    --to=lorenzo.bianconi@oss.qualcomm.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=james.hilliard1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox