From: Hangbin Liu <hangbin.liu@linux.dev>
To: netdev-bot+sashiko@kernel.org
Cc: jv@jvosburgh.net, andrew+netdev@lunn.ch, davem@davemloft.net,
edumazet@kernel.org, kuba@kernel.org, pabeni@redhat.com,
ast@kernel.org, daniel@iogearbox.net, hawk@kernel.org,
john.fastabend@gmail.com, sdf@fomichev.me,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
bpf@vger.kernel.org
Subject: Re: [PATCH net-next 1/6] bonding: check XDP support before enslaving changes state
Date: Wed, 18 Nov 2026 09:06:09 +0800 [thread overview]
Message-ID: <avz6AQetwPAY--Mt@fedora> (raw)
In-Reply-To: <179492640769.3136.3241898567283164730@kernel.org>
On Tue, Nov 17, 2026 at 02:40:07PM +0000, netdev-bot+sashiko@kernel.org wrote:
> Thank you for your contribution! Sashiko AI review found 3 potential
> issue(s) to consider.
>
> Critical: 0 · High: 1 · Medium: 0 · Low: 2
>
> If you believe none of the issues are legitimate, please reply to each
> issue of Medium severity or higher and explain why the AI is wrong.
> If any of them are legitimate and you plan to respin, please let patchwork
> know by including "pw-bot: cr" as a separate line at the end of your reply
> (one such reply per series is enough).
>
> - [High] The fix is incomplete: a slave without ndo_xdp_xmit can still be
> reached by bond_xdp_xmit() whenever the bond has no XDP program.
> - [Low] The commit message presents this as a crash fix ("bond_xdp_xmit()
> may call a NULL ndo_xdp_xmit"), but the commit has no Fixes: tag (and…
> - [Low] The commit author (From:) is "Hangbin Liu
> <hangbin.liu@linux.dev>", but the only Signed-off-by line is "Hangbin…
>
> --
>
> bonding: check XDP support before enslaving changes state
>
> This commit moves two XDP checks in bond_enslave() to the validation
> section at the top of the function: the ndo_bpf/ndo_xdp_xmit capability
> check and the slave XDP program count check. They now run before the slave
> is opened, attached and made visible to the datapath. The
> dev_xdp_propagate() setup stays where it was.
>
> > In particular
> > the slave can become bond->curr_active_slave, or be published via
> > bond->slave_cnt, before we verify that slave_dev->netdev_ops->ndo_xdp_xmit
> > exists, so bond_xdp_xmit() may call a NULL ndo_xdp_xmit.
>
> [Severity: Low]
> The commit message describes this as a fix for a NULL ndo_xdp_xmit call,
> but there is no Fixes: tag and no Cc: stable. Should there be a Fixes:
> tag?
>
> git blame shows the late capability and prog-count checks came from commit
> 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver"), and
> commit 6d5f1ef83868 later restructured them.
>
> > Signed-off-by: Hangbin Liu <liuhangbin@kylinos.cn>
>
> [Severity: Low]
> The author is Hangbin Liu <hangbin.liu@linux.dev>, but the only
> Signed-off-by line uses <liuhangbin@kylinos.cn>. checkpatch reports this
> as a From:/Signed-off-by: email address mismatch. Could the two addresses
> be made to match?
>
> > diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
> > index 9249a79a168e4..340af4c3fa201 100644
> > --- a/drivers/net/bonding/bond_main.c
> > +++ b/drivers/net/bonding/bond_main.c
> > @@ -1948,6 +1948,23 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
> > return -EPERM;
> > }
> >
> > + /* Check XDP support before any state change, so a slave without
> > + * XDP can never become visible to bond_xdp_xmit().
> > + */
> > + if (bond->xdp_prog) {
> > + if (!slave_ops->ndo_bpf || !slave_ops->ndo_xdp_xmit) {
> > + SLAVE_NL_ERR(bond_dev, slave_dev, extack,
> > + "Slave does not support XDP");
> > + return -EOPNOTSUPP;
> > + }
>
> [Severity: High]
> Does the "can never become visible" claim still hold when bond->xdp_prog
> is NULL?
>
> bond_xdp_xmit() is the bond's ndo_xdp_xmit. Devmap and bpf_redirect reach
> it after only this check:
>
> kernel/bpf/devmap.c:__xdp_enqueue() {
> ...
> if (!(dev->xdp_features & NETDEV_XDP_ACT_NDO_XMIT))
> return -EOPNOTSUPP;
> ...
> }
>
> bond_xdp_set_features() builds that flag from bond_xdp_check() and the
> slaves' xdp_features. It never looks at bond->xdp_prog:
>
> if (!bond_xdp_check(bond, BOND_MODE(bond)) || !bond_has_slaves(bond)) {
> xdp_clear_features_flag(bond_dev);
> return;
> }
>
> bond_for_each_slave(bond, slave, iter)
> val &= slave->dev->xdp_features;
>
> Take a round-robin, active-backup, XOR or 802.3ad bond with no XDP
> program, where all current slaves advertise NDO_XMIT and another device
> redirects XDP frames into the bond. Enslaving a device with a NULL
> ndo_xdp_xmit skips this check.
>
> The new slave then becomes visible before bond_xdp_set_features() clears
> NDO_XMIT on the bond:
>
> - the default case of the mode switch in bond_enslave() does
> rcu_assign_pointer(bond->curr_active_slave, new_slave)
> - bond_master_upper_dev_link() puts the slave on the lower list that
> bond_get_slave_by_id() walks
> - slave_cnt++ and bond_update_slave_arr() also run before
> bond_xdp_set_features()
>
> A redirect on another CPU runs under RCU only, without RTNL. It could pick
> the new slave, for example through the IGMP path of
> bond_xdp_xmit_roundrobin_slave_get():
>
> if (iph->protocol == IPPROTO_IGMP) {
> slave = rcu_dereference(bond->curr_active_slave);
> if (slave)
> return slave;
>
> bond_xdp_xmit() then makes the call without a NULL check:
>
> err = slave_dev->netdev_ops->ndo_xdp_xmit(slave_dev, 1, frames1, flags);
>
> Can this call a NULL ndo_xdp_xmit in softirq context?
>
> There seems to be a second window as well. __xdp_enqueue() checks
> xdp_features when a frame is queued, but the bulk queue is flushed later
> without a recheck:
>
> kernel/bpf/devmap.c:bq_xmit_all() {
> ...
> sent = dev->netdev_ops->ndo_xdp_xmit(dev, to_send, bq->q, flags);
> ...
> }
>
> No RCU grace period follows xdp_set_features_flag() either.
>
> The later patches in the series don't close this. At the end of the
> series:
>
> - the check is still gated on bond->xdp_prog, now in
> bond_enslave_validate()
> - bond_xdp_xmit() is unchanged
> - bond_xdp_set_features() now runs before bond_publish_slave(), but
> still after the curr_active_slave assignment and the lower-list link
>
> One option is to guard the call in bond_xdp_xmit(), or to select only
> slaves that advertise NDO_XMIT. Another is to clear the bond's NDO_XMIT
> and wait for in-flight readers before any slave without XDP support
> becomes visible, whether or not bond->xdp_prog is set. Would one of these
> be a better fit?
>
As I mentioned in the previous mail[1], we may need a check like
if (likely(slave_dev->netdev_ops->ndo_xdp_xmit))
err = slave_dev->netdev_ops->ndo_xdp_xmit(slave_dev, 1, frames1, flags);
On the other hand, should we call bond_xdp_xmit() without a bond->xdp_prog?
I need to check if we should move the bond_xdp_set_features(bond_dev);
inside the if (bond->xdp_prog) checking. So when we build the bond xdp
features, we can make sure there is a bond->xdp_prog set.
[1] https://lore.kernel.org/netdev/aqokD2avF7B7Towi@fedora/
Thanks
Hangbin
---
pw-bot: cr
next prev parent reply other threads:[~2026-11-18 1:06 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-13 14:04 [PATCH net-next 0/6] bonding: refactor bond_enslave() to fix XDP ordering and error rollback Hangbin Liu
2026-11-13 14:04 ` [PATCH net-next 1/6] bonding: check XDP support before enslaving changes state Hangbin Liu
2026-11-17 14:40 ` netdev-bot+sashiko
2026-11-18 1:06 ` Hangbin Liu [this message]
2026-11-13 14:04 ` [PATCH net-next 2/6] bonding: finish XDP setup before publishing the slave Hangbin Liu
2026-11-17 14:40 ` netdev-bot+sashiko
2026-11-13 14:04 ` [PATCH net-next 3/6] bonding: complete rollback of bond_enslave() error paths Hangbin Liu
2026-11-17 14:40 ` netdev-bot+sashiko
2026-11-13 14:04 ` [PATCH net-next 4/6] bonding: factor out slave publication Hangbin Liu
2026-11-17 14:40 ` netdev-bot+sashiko
2026-11-13 14:04 ` [PATCH net-next 5/6] bonding: factor out XDP slave check Hangbin Liu
2026-11-13 14:04 ` [PATCH net-next 6/6] bonding: factor out bond_enslave_validate Hangbin Liu
2026-11-17 14:40 ` netdev-bot+sashiko
2026-11-13 14:11 ` [PATCH net-next 0/6] bonding: refactor bond_enslave() to fix XDP ordering and error rollback netdev-bot+sinfo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=avz6AQetwPAY--Mt@fedora \
--to=hangbin.liu@linux.dev \
--cc=andrew+netdev@lunn.ch \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=hawk@kernel.org \
--cc=john.fastabend@gmail.com \
--cc=jv@jvosburgh.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev-bot+sashiko@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sdf@fomichev.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox