Netdev List
 help / color / mirror / Atom feed
From: Eric Joyner <eric.joyner@amd.com>
To: netdev@vger.kernel.org
Cc: Brett Creeley <brett.creeley@amd.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Simon Horman <horms@kernel.org>,
	Vadim Fedorenko <vadim.fedorenko@linux.dev>,
	"Nikhil P. Rao" <nikhil.rao@amd.com>,
	Eric Dumazet <edumazet@kernel.org>
Subject: Re: [PATCH net-next v3 0/5] ionic: FEC reporting fixes and .get_fec_stats handler
Date: Mon, 9 Nov 2026 11:35:02 -0800	[thread overview]
Message-ID: <c45b46d9-4dca-4fef-9bf8-9ab2fbcd48b8@amd.com> (raw)
In-Reply-To: <20261104-ionic-get-fec-stats-v3-0-b261fd53d0a7@amd.com>

On 11/4/2026 1:19 PM, Eric Joyner wrote:
> Add a .get_fec_stats ethtool handler, and fix the FEC reporting it
> depends on.
> 
> Patch 1 writes the IONIC_STAT_INVALID markers in extra_stats one
> counter at a time, so a reader that tests a single counter cannot see a
> torn value.
> 
> Patches 2-4 fix ionic_get_fecparam(). fec->fec reported the constant
> set of supported modes instead of the configured mode, and
> fec->active_fec reported the requested mode instead of the operational
> one. Patch 2 has a Fixes: tag, but patches 3 and 4 rework the lines it
> changes, so it is sent to net-next with them rather than to net. The
> bug only affects what ethtool reports.
> 
> Patch 5 adds the handler. It reports statistics only while the
> operational FEC mode is RS.
> 
> The netdev AI review of v2, which Simon forwarded, asked whether the
> per-bin local really guarantees a single read of each counter. It does
> not, so v3 reads every counter with READ_ONCE() and drops the struct
> copy. The port_info lifetime problem that the AI review raised on v1
> and v2 is fixed in net-next by commit d90d1a768b3b ("ionic: fix
> port_info use-after-free on firmware recovery").
> 
> Claude was used while developing this series: to investigate the v2
> review questions, and to help write the code changes and commit
> messages. The authors reviewed every change. The series was tested on
> Pollara and Vulcano NICs.
> 
> Signed-off-by: Eric Joyner <eric.joyner@amd.com>
> ---
> Changes in v3:
> - Read each counter with READ_ONCE() and drop the struct copy of
>   extra_stats (netdev AI review of v2).
> - Report statistics based on status.fec_type, the operational FEC mode,
>   instead of config.fec_type, matching the active FEC mode that patch 4
>   reports.
> - Add patches 1-4, which fix the FEC reporting the handler depends on.
>   Patches 1-4 are by Nikhil, who is also a Co-developed-by on patch 5.
> - Drop Vadim's Reviewed-by from v1, since the code has changed.
> - Rebase onto current net-next.
> - Link to v2: https://lore.kernel.org/r/20260814-ionic-get-fec-stats-v2-1-13f0e7d2e702@amd.com
> 
> Changes in v2:
> - Latch each histogram bin into a local before testing it against
>   IONIC_STAT_INVALID, so the sentinel check and the store cannot be
>   folded into two separate reads of the firmware-updated DMA buffer.
> - Explain in the commit message why the RS FEC check gates every
>   reported counter rather than just the histogram: they all come from
>   the RS decoder, including fec_corrected_bits_total despite its name.
> - Rebased onto current net-next.
> - Link to v1: https://lore.kernel.org/r/20260731214021.15279-1-eric.joyner@amd.com
> 
> ---
> Eric Joyner (1):
>       ionic: Add .get_fec_stats ethtool handler
> 
> Nikhil P. Rao (4):
>       ionic: write the extra_stats invalid markers one counter at a time
>       ionic: report the configured FEC mode in ethtool_fecparam.fec
>       ionic: map the FEC type through a helper in ionic_get_fecparam()
>       ionic: report the operational FEC mode from ethtool --show-fec
> 
>  .../net/ethernet/pensando/ionic/ionic_ethtool.c    | 116 ++++++++++++++++++---
>  drivers/net/ethernet/pensando/ionic/ionic_main.c   |   8 +-
>  drivers/net/ethernet/pensando/ionic/ionic_stats.h  |   2 +
>  3 files changed, 112 insertions(+), 14 deletions(-)
> ---
> base-commit: 7b6ab4dbc156e2f96419715130b3d5738a306c93
> change-id: 20260814-ionic-get-fec-stats-990736964908
> 
> Best regards,

The Sashiko review from sashiko.dev says no regressions:
https://sashiko.dev/#/patchset/20261104-ionic-get-fec-stats-v3-0-b261fd53d0a7%40amd.com

But I don't see an entry for this patchset in
https://netdev-ai.bots.linux.dev/sashiko/#/ after searching for it; does it need
a manual submission there?

- Eric

      parent reply	other threads:[~2026-11-09 19:35 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-04 21:19 [PATCH net-next v3 0/5] ionic: FEC reporting fixes and .get_fec_stats handler Eric Joyner
2026-11-04 21:19 ` [PATCH net-next v3 1/5] ionic: write the extra_stats invalid markers one counter at a time Eric Joyner
2026-11-04 21:19 ` [PATCH net-next v3 2/5] ionic: report the configured FEC mode in ethtool_fecparam.fec Eric Joyner
2026-11-10 21:26   ` Jakub Kicinski
2026-11-04 21:19 ` [PATCH net-next v3 3/5] ionic: map the FEC type through a helper in ionic_get_fecparam() Eric Joyner
2026-11-04 21:19 ` [PATCH net-next v3 4/5] ionic: report the operational FEC mode from ethtool --show-fec Eric Joyner
2026-11-10 21:26   ` Jakub Kicinski
2026-11-04 21:19 ` [PATCH net-next v3 5/5] ionic: Add .get_fec_stats ethtool handler Eric Joyner
2026-11-09 19:35 ` Eric Joyner [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c45b46d9-4dca-4fef-9bf8-9ab2fbcd48b8@amd.com \
    --to=eric.joyner@amd.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=brett.creeley@amd.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nikhil.rao@amd.com \
    --cc=pabeni@redhat.com \
    --cc=vadim.fedorenko@linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox