From: Florian Fainelli <f.fainelli@gmail.com>
To: Arun Parameswaran <arun.parameswaran@broadcom.com>,
Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
"Clément Péron" <peron.clem@gmail.com>
Subject: Re: [PATCH 1/1] net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
Date: Tue, 5 Jun 2018 14:41:41 -0700 [thread overview]
Message-ID: <c51cf072-beeb-6630-e260-24c585d29aae@gmail.com> (raw)
In-Reply-To: <1528231092-31472-1-git-send-email-arun.parameswaran@broadcom.com>
On 06/05/2018 01:38 PM, Arun Parameswaran wrote:
> In the Broadcom Cygnus SoC, the brcm tag needs to be inserted
> in between the mac address and the ether type (should use
> 'DSA_PROTO_TAG_BRCM') for the packets sent to the internal
> b53 switch.
>
> Since the Cygnus was added with the BCM58XX device id and the
> BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is
> broken, due to the incorrect brcm tag location.
>
> Add a new b53 device id (BCM583XX) for Cygnus family to fix the
> issue. Add the new device id to the BCM58XX family as Cygnus
> is similar to the BCM58XX in most other functionalities.
>
> Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags")
>
> Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Clement originally reported this to me/us:
Reported-by: Clément Péron <peron.clem@gmail.com>
I completely overlooked that when adding support for prepended Broadcom
tags, thanks for the fix Arun!
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
David, can you also queue this up for -stable? Thank you
> ---
> drivers/net/dsa/b53/b53_common.c | 15 ++++++++++++++-
> drivers/net/dsa/b53/b53_priv.h | 2 ++
> drivers/net/dsa/b53/b53_srab.c | 4 ++--
> 3 files changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
> index 3da5fca..bbc6cc6 100644
> --- a/drivers/net/dsa/b53/b53_common.c
> +++ b/drivers/net/dsa/b53/b53_common.c
> @@ -684,7 +684,8 @@ static int b53_switch_reset(struct b53_device *dev)
> * still use this driver as a library and need to perform the reset
> * earlier.
> */
> - if (dev->chip_id == BCM58XX_DEVICE_ID) {
> + if (dev->chip_id == BCM58XX_DEVICE_ID ||
> + dev->chip_id == BCM583XX_DEVICE_ID) {
> b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®);
> reg |= SW_RST | EN_SW_RST | EN_CH_RST;
> b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
> @@ -1880,6 +1881,18 @@ struct b53_chip_data {
> .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
> },
> {
> + .chip_id = BCM583XX_DEVICE_ID,
> + .dev_name = "BCM583xx/11360",
> + .vlans = 4096,
> + .enabled_ports = 0x103,
> + .arl_entries = 4,
> + .cpu_port = B53_CPU_PORT,
> + .vta_regs = B53_VTA_REGS,
> + .duplex_reg = B53_DUPLEX_STAT_GE,
> + .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
> + .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
> + },
> + {
> .chip_id = BCM7445_DEVICE_ID,
> .dev_name = "BCM7445",
> .vlans = 4096,
> diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
> index 3b57f47..b232aaa 100644
> --- a/drivers/net/dsa/b53/b53_priv.h
> +++ b/drivers/net/dsa/b53/b53_priv.h
> @@ -62,6 +62,7 @@ enum {
> BCM53018_DEVICE_ID = 0x53018,
> BCM53019_DEVICE_ID = 0x53019,
> BCM58XX_DEVICE_ID = 0x5800,
> + BCM583XX_DEVICE_ID = 0x58300,
> BCM7445_DEVICE_ID = 0x7445,
> BCM7278_DEVICE_ID = 0x7278,
> };
> @@ -181,6 +182,7 @@ static inline int is5301x(struct b53_device *dev)
> static inline int is58xx(struct b53_device *dev)
> {
> return dev->chip_id == BCM58XX_DEVICE_ID ||
> + dev->chip_id == BCM583XX_DEVICE_ID ||
> dev->chip_id == BCM7445_DEVICE_ID ||
> dev->chip_id == BCM7278_DEVICE_ID;
> }
> diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
> index c37ffd1..8247481 100644
> --- a/drivers/net/dsa/b53/b53_srab.c
> +++ b/drivers/net/dsa/b53/b53_srab.c
> @@ -364,7 +364,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
> { .compatible = "brcm,bcm53018-srab" },
> { .compatible = "brcm,bcm53019-srab" },
> { .compatible = "brcm,bcm5301x-srab" },
> - { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID },
> + { .compatible = "brcm,bcm11360-srab", .data = (void *)BCM583XX_DEVICE_ID },
> { .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
> @@ -372,7 +372,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
> { .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
> - { .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID },
> + { .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID },
> { .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
> { /* sentinel */ },
> };
>
--
Florian
next prev parent reply other threads:[~2018-06-05 21:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-05 20:38 [PATCH 1/1] net: dsa: b53: Fix for brcm tag issue in Cygnus SoC Arun Parameswaran
2018-06-05 20:55 ` Scott Branden
2018-06-06 8:32 ` Clément Péron
2018-06-05 21:41 ` Florian Fainelli [this message]
2018-06-06 17:48 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c51cf072-beeb-6630-e260-24c585d29aae@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=arun.parameswaran@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peron.clem@gmail.com \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).