Re: [PATCH v2] net: phy: marvell: Add errata section 5.1 for Alaska PHY

[Stefan Roese <sr@denx.de>]

Hi Paolo,

On 17.05.22 13:01, Paolo Abeni wrote:
> Hello,
> 
> On Mon, 2022-05-16 at 09:08 +0200, Stefan Roese wrote:
>> From: Leszek Polak <lpolak@arri.de>
>>
>> As per Errata Section 5.1, if EEE is intended to be used, some register
>> writes must be done once after every hardware reset. This patch now adds
>> the necessary register writes as listed in the Marvell errata.
>>
>> Without this fix we experience ethernet problems on some of our boards
>> equipped with a new version of this ethernet PHY (different supplier).
>>
>> The fix applies to Marvell Alaska 88E1510/88E1518/88E1512/88E1514
>> Rev. A0.
>>
>> Signed-off-by: Leszek Polak <lpolak@arri.de>
>> Signed-off-by: Stefan Roese <sr@denx.de>
>> Cc: Marek Behún <kabel@kernel.org>
>> Cc: Andrew Lunn <andrew@lunn.ch>
>> Cc: Heiner Kallweit <hkallweit1@gmail.com>
>> Cc: Russell King <linux@armlinux.org.uk>
>> Cc: David S. Miller <davem@davemloft.net>
> 
> It's not clear to me if you are targeting -net or net-next, could you
> please clarify? In case this is for -net, please add a suitable fixes
> tag, thanks!

Sorry for not being clear on this. net-next is good AFAICT.

Should I re-submit to net-next?

Thanks,
Stefan