From: Jason Wang <jasowang@redhat.com>
To: Yuya Kusakabe <yuya.kusakabe@gmail.com>
Cc: ast@kernel.org, daniel@iogearbox.net, davem@davemloft.net,
hawk@kernel.org, jakub.kicinski@netronome.com,
john.fastabend@gmail.com, kafai@fb.com, mst@redhat.com,
netdev@vger.kernel.org, songliubraving@fb.com, yhs@fb.com
Subject: Re: [PATCH bpf-next v3] virtio_net: add XDP meta data support
Date: Tue, 2 Jul 2019 16:33:28 +0800 [thread overview]
Message-ID: <ca724dcf-4ffb-ff49-d307-1b45143712b5@redhat.com> (raw)
In-Reply-To: <20190702081646.23230-1-yuya.kusakabe@gmail.com>
On 2019/7/2 下午4:16, Yuya Kusakabe wrote:
> This adds XDP meta data support to both receive_small() and
> receive_mergeable().
>
> Fixes: de8f3a83b0a0 ("bpf: add meta pointer for direct access")
> Signed-off-by: Yuya Kusakabe <yuya.kusakabe@gmail.com>
> ---
> v3:
> - fix preserve the vnet header in receive_small().
> v2:
> - keep copy untouched in page_to_skb().
> - preserve the vnet header in receive_small().
> - fix indentation.
> ---
> drivers/net/virtio_net.c | 45 +++++++++++++++++++++++++++-------------
> 1 file changed, 31 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index 4f3de0ac8b0b..03a1ae6fe267 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -371,7 +371,7 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi,
> struct receive_queue *rq,
> struct page *page, unsigned int offset,
> unsigned int len, unsigned int truesize,
> - bool hdr_valid)
> + bool hdr_valid, unsigned int metasize)
> {
> struct sk_buff *skb;
> struct virtio_net_hdr_mrg_rxbuf *hdr;
> @@ -393,7 +393,7 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi,
> else
> hdr_padded_len = sizeof(struct padded_vnet_hdr);
>
> - if (hdr_valid)
> + if (hdr_valid && !metasize)
> memcpy(hdr, p, hdr_len);
>
> len -= hdr_len;
> @@ -405,6 +405,11 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi,
> copy = skb_tailroom(skb);
> skb_put_data(skb, p, copy);
>
> + if (metasize) {
> + __skb_pull(skb, metasize);
> + skb_metadata_set(skb, metasize);
> + }
> +
> len -= copy;
> offset += copy;
>
> @@ -644,6 +649,7 @@ static struct sk_buff *receive_small(struct net_device *dev,
> unsigned int delta = 0;
> struct page *xdp_page;
> int err;
> + unsigned int metasize = 0;
>
> len -= vi->hdr_len;
> stats->bytes += len;
> @@ -683,10 +689,13 @@ static struct sk_buff *receive_small(struct net_device *dev,
>
> xdp.data_hard_start = buf + VIRTNET_RX_PAD + vi->hdr_len;
> xdp.data = xdp.data_hard_start + xdp_headroom;
> - xdp_set_data_meta_invalid(&xdp);
> xdp.data_end = xdp.data + len;
> + xdp.data_meta = xdp.data;
> xdp.rxq = &rq->xdp_rxq;
> orig_data = xdp.data;
> + /* Copy the vnet header to the front of data_hard_start to avoid
> + * overwriting by XDP meta data */
> + memcpy(xdp.data_hard_start - vi->hdr_len, xdp.data - vi->hdr_len, vi->hdr_len);
What happens if we have a large metadata that occupies all headroom here?
Thanks
> act = bpf_prog_run_xdp(xdp_prog, &xdp);
> stats->xdp_packets++;
>
> @@ -695,9 +704,11 @@ static struct sk_buff *receive_small(struct net_device *dev,
> /* Recalculate length in case bpf program changed it */
> delta = orig_data - xdp.data;
> len = xdp.data_end - xdp.data;
> + metasize = xdp.data - xdp.data_meta;
> break;
> case XDP_TX:
> stats->xdp_tx++;
> + xdp.data_meta = xdp.data;
> xdpf = convert_to_xdp_frame(&xdp);
> if (unlikely(!xdpf))
> goto err_xdp;
> @@ -736,10 +747,12 @@ static struct sk_buff *receive_small(struct net_device *dev,
> skb_reserve(skb, headroom - delta);
> skb_put(skb, len);
> if (!delta) {
> - buf += header_offset;
> - memcpy(skb_vnet_hdr(skb), buf, vi->hdr_len);
> + memcpy(skb_vnet_hdr(skb), buf + VIRTNET_RX_PAD, vi->hdr_len);
> } /* keep zeroed vnet hdr since packet was changed by bpf */
>
> + if (metasize)
> + skb_metadata_set(skb, metasize);
> +
> err:
> return skb;
>
> @@ -760,8 +773,8 @@ static struct sk_buff *receive_big(struct net_device *dev,
> struct virtnet_rq_stats *stats)
> {
> struct page *page = buf;
> - struct sk_buff *skb = page_to_skb(vi, rq, page, 0, len,
> - PAGE_SIZE, true);
> + struct sk_buff *skb =
> + page_to_skb(vi, rq, page, 0, len, PAGE_SIZE, true, 0);
>
> stats->bytes += len - vi->hdr_len;
> if (unlikely(!skb))
> @@ -793,6 +806,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
> unsigned int truesize;
> unsigned int headroom = mergeable_ctx_to_headroom(ctx);
> int err;
> + unsigned int metasize = 0;
>
> head_skb = NULL;
> stats->bytes += len - vi->hdr_len;
> @@ -839,8 +853,8 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
> data = page_address(xdp_page) + offset;
> xdp.data_hard_start = data - VIRTIO_XDP_HEADROOM + vi->hdr_len;
> xdp.data = data + vi->hdr_len;
> - xdp_set_data_meta_invalid(&xdp);
> xdp.data_end = xdp.data + (len - vi->hdr_len);
> + xdp.data_meta = xdp.data;
> xdp.rxq = &rq->xdp_rxq;
>
> act = bpf_prog_run_xdp(xdp_prog, &xdp);
> @@ -852,8 +866,9 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
> * adjustments. Note other cases do not build an
> * skb and avoid using offset
> */
> - offset = xdp.data -
> - page_address(xdp_page) - vi->hdr_len;
> + metasize = xdp.data - xdp.data_meta;
> + offset = xdp.data - page_address(xdp_page) -
> + vi->hdr_len - metasize;
>
> /* recalculate len if xdp.data or xdp.data_end were
> * adjusted
> @@ -863,14 +878,15 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
> if (unlikely(xdp_page != page)) {
> rcu_read_unlock();
> put_page(page);
> - head_skb = page_to_skb(vi, rq, xdp_page,
> - offset, len,
> - PAGE_SIZE, false);
> + head_skb = page_to_skb(vi, rq, xdp_page, offset,
> + len, PAGE_SIZE, false,
> + metasize);
> return head_skb;
> }
> break;
> case XDP_TX:
> stats->xdp_tx++;
> + xdp.data_meta = xdp.data;
> xdpf = convert_to_xdp_frame(&xdp);
> if (unlikely(!xdpf))
> goto err_xdp;
> @@ -921,7 +937,8 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
> goto err_skb;
> }
>
> - head_skb = page_to_skb(vi, rq, page, offset, len, truesize, !xdp_prog);
> + head_skb = page_to_skb(vi, rq, page, offset, len, truesize, !xdp_prog,
> + metasize);
> curr_skb = head_skb;
>
> if (unlikely(!curr_skb))
next prev parent reply other threads:[~2019-07-02 8:33 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-27 8:06 [PATCH bpf-next] virtio_net: add XDP meta data support Yuya Kusakabe
2019-07-01 9:30 ` Jason Wang
2019-07-02 1:00 ` Yuya Kusakabe
2019-07-02 3:15 ` [PATCH bpf-next v2] " Yuya Kusakabe
2019-07-02 3:59 ` Jason Wang
2019-07-02 5:15 ` Yuya Kusakabe
2019-07-02 8:16 ` [PATCH bpf-next v3] " Yuya Kusakabe
2019-07-02 8:33 ` Jason Wang [this message]
2019-07-02 14:11 ` Yuya Kusakabe
2019-07-08 22:38 ` Daniel Borkmann
2019-07-09 3:04 ` Jason Wang
2019-07-09 20:03 ` Daniel Borkmann
2019-07-10 2:30 ` Jason Wang
2020-02-03 13:52 ` Yuya Kusakabe
2020-02-04 3:31 ` Jason Wang
2020-02-04 7:16 ` [PATCH bpf-next v4] " Yuya Kusakabe
2020-02-05 4:10 ` Jason Wang
2020-02-05 9:18 ` Yuya Kusakabe
2020-02-06 3:20 ` Jason Wang
2020-02-20 8:55 ` [PATCH bpf-next v5] " Yuya Kusakabe
2020-02-21 4:23 ` Jason Wang
2020-02-21 8:36 ` Yuya Kusakabe
2020-02-21 11:01 ` Michael S. Tsirkin
2020-02-23 8:14 ` Michael S. Tsirkin
2020-02-24 4:05 ` Jason Wang
2020-02-25 0:52 ` Yuya Kusakabe
2020-02-05 5:33 ` [PATCH bpf-next v4] " Michael S. Tsirkin
2020-02-05 9:19 ` Yuya Kusakabe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ca724dcf-4ffb-ff49-d307-1b45143712b5@redhat.com \
--to=jasowang@redhat.com \
--cc=ast@kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=hawk@kernel.org \
--cc=jakub.kicinski@netronome.com \
--cc=john.fastabend@gmail.com \
--cc=kafai@fb.com \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=songliubraving@fb.com \
--cc=yhs@fb.com \
--cc=yuya.kusakabe@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).