From mboxrd@z Thu Jan 1 00:00:00 1970 From: Scott Branden Subject: Re: [PATCH v3 0/6] add NS2 support to bgmac Date: Tue, 1 Nov 2016 11:01:19 -0700 Message-ID: References: <1478022694-25308-1-git-send-email-jon.mason@broadcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Cc: rafal@milecki.pl, bcm-kernel-feedback-list@broadcom.com, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org To: Jon Mason , David Miller , Rob Herring , Mark Rutland , Florian Fainelli Return-path: In-Reply-To: <1478022694-25308-1-git-send-email-jon.mason@broadcom.com> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org Hi Jon, On 16-11-01 10:51 AM, Jon Mason wrote: > Changes in v3: > * Clean-up the bgmac DT binding doc (per Rob Herring) > * Document the lane swap binding and make it generic (Per Andrew Lunn) Where is the documentation of the lane swap binding? > > > Changes in v2: > * Remove the PHY power-on (per Andrew Lunn) > * Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn) > This results on none of the original PHY code from Vikas being > present. So, I'm removing him as an author and giving him > "Inspired-by" credit. > * Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian > Fainelli) > * Remove bgmac sleep (per Florian Fainelli) > * Re-add bgmac chip reset (per Florian Fainelli and Ray Jui) > * Rebased on latest net-next > * Added patch for bcm54xx_auxctl_read, which is used in the BCM54810 > > > Add support for the amac found in the Broadcom Northstar2 SoC to the > bgmac driver. This necessitates adding support to connect to an > externally defined phy (as described in the device tree) in the driver. > These phy changes are in addition to the changes necessary to get NS2 > working. > > > Jon Mason (6): > net: phy: broadcom: add bcm54xx_auxctl_read > net: phy: broadcom: Add BCM54810 PHY entry > Documentation: devicetree: net: add NS2 bindings to amac > net: ethernet: bgmac: device tree phy enablement > net: ethernet: bgmac: add NS2 support > arm64: dts: NS2: add AMAC ethernet support > > .../devicetree/bindings/net/brcm,amac.txt | 16 ++-- > arch/arm64/boot/dts/broadcom/ns2-svk.dts | 5 ++ > arch/arm64/boot/dts/broadcom/ns2.dtsi | 12 +++ > drivers/net/ethernet/broadcom/bgmac-bcma.c | 48 ++++++++++ > drivers/net/ethernet/broadcom/bgmac-platform.c | 100 ++++++++++++++++++++- > drivers/net/ethernet/broadcom/bgmac.c | 55 ++---------- > drivers/net/ethernet/broadcom/bgmac.h | 8 ++ > drivers/net/phy/Kconfig | 2 +- > drivers/net/phy/broadcom.c | 68 +++++++++++++- > include/linux/brcmphy.h | 11 +++ > 10 files changed, 268 insertions(+), 57 deletions(-) >