From: Nicolas Ferre <nicolas.ferre@microchip.com>
To: "Théo Lebrun" <theo.lebrun@bootlin.com>,
"Andrew Lunn" <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Claudiu Beznea" <claudiu.beznea@tuxon.dev>,
"Russell King" <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Benoît Monin" <benoit.monin@bootlin.com>,
"Grégory Clement" <gregory.clement@bootlin.com>,
"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Andrew Lunn" <andrew@lunn.ch>
Subject: Re: [PATCH net-next v3 4/5] net: macb: rename bp->sgmii_phy field to bp->phy
Date: Thu, 30 Oct 2025 15:34:44 +0100 [thread overview]
Message-ID: <cd0ae7c8-0df7-443f-a5d3-da2c3aa88582@microchip.com> (raw)
In-Reply-To: <20251023-macb-eyeq5-v3-4-af509422c204@bootlin.com>
On 23/10/2025 at 18:22, Théo Lebrun wrote:
> The bp->sgmii_phy field is initialised at probe by init_reset_optional()
> if bp->phy_interface == PHY_INTERFACE_MODE_SGMII. It gets used by:
> - zynqmp_config: "cdns,zynqmp-gem" or "xlnx,zynqmp-gem" compatibles.
> - mpfs_config: "microchip,mpfs-macb" compatible.
> - versal_config: "xlnx,versal-gem" compatible.
>
> Make name more generic as EyeQ5 requires the PHY in SGMII & RGMII cases.
>
> Drop "for ZynqMP SGMII mode" comment that is already a lie, as it gets
> used on Microchip platforms as well. And soon it won't be SGMII-only.
>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
> ---
> drivers/net/ethernet/cadence/macb.h | 2 +-
> drivers/net/ethernet/cadence/macb_main.c | 26 +++++++++++++-------------
> 2 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
> index 05bfa9bd4782..87414a2ddf6e 100644
> --- a/drivers/net/ethernet/cadence/macb.h
> +++ b/drivers/net/ethernet/cadence/macb.h
> @@ -1341,7 +1341,7 @@ struct macb {
>
> struct macb_ptp_info *ptp_info; /* macb-ptp interface */
>
> - struct phy *sgmii_phy; /* for ZynqMP SGMII mode */
> + struct phy *phy;
>
> spinlock_t tsu_clk_lock; /* gem tsu clock locking */
> unsigned int tsu_rate;
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index 8b688a6cb2f9..44188e7eee56 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -2965,7 +2965,7 @@ static int macb_open(struct net_device *dev)
>
> macb_init_hw(bp);
>
> - err = phy_power_on(bp->sgmii_phy);
> + err = phy_power_on(bp->phy);
> if (err)
> goto reset_hw;
>
> @@ -2981,7 +2981,7 @@ static int macb_open(struct net_device *dev)
> return 0;
>
> phy_off:
> - phy_power_off(bp->sgmii_phy);
> + phy_power_off(bp->phy);
>
> reset_hw:
> macb_reset_hw(bp);
> @@ -3013,7 +3013,7 @@ static int macb_close(struct net_device *dev)
> phylink_stop(bp->phylink);
> phylink_disconnect_phy(bp->phylink);
>
> - phy_power_off(bp->sgmii_phy);
> + phy_power_off(bp->phy);
>
> spin_lock_irqsave(&bp->lock, flags);
> macb_reset_hw(bp);
> @@ -5141,13 +5141,13 @@ static int init_reset_optional(struct platform_device *pdev)
>
> if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
> /* Ensure PHY device used in SGMII mode is ready */
> - bp->sgmii_phy = devm_phy_optional_get(&pdev->dev, NULL);
> + bp->phy = devm_phy_optional_get(&pdev->dev, NULL);
>
> - if (IS_ERR(bp->sgmii_phy))
> - return dev_err_probe(&pdev->dev, PTR_ERR(bp->sgmii_phy),
> + if (IS_ERR(bp->phy))
> + return dev_err_probe(&pdev->dev, PTR_ERR(bp->phy),
> "failed to get SGMII PHY\n");
>
> - ret = phy_init(bp->sgmii_phy);
> + ret = phy_init(bp->phy);
> if (ret)
> return dev_err_probe(&pdev->dev, ret,
> "failed to init SGMII PHY\n");
> @@ -5176,7 +5176,7 @@ static int init_reset_optional(struct platform_device *pdev)
> /* Fully reset controller at hardware level if mapped in device tree */
> ret = device_reset_optional(&pdev->dev);
> if (ret) {
> - phy_exit(bp->sgmii_phy);
> + phy_exit(bp->phy);
> return dev_err_probe(&pdev->dev, ret, "failed to reset controller");
> }
>
> @@ -5184,7 +5184,7 @@ static int init_reset_optional(struct platform_device *pdev)
>
> err_out_phy_exit:
> if (ret)
> - phy_exit(bp->sgmii_phy);
> + phy_exit(bp->phy);
>
> return ret;
> }
> @@ -5594,7 +5594,7 @@ static int macb_probe(struct platform_device *pdev)
> mdiobus_free(bp->mii_bus);
>
> err_out_phy_exit:
> - phy_exit(bp->sgmii_phy);
> + phy_exit(bp->phy);
>
> err_out_free_netdev:
> free_netdev(dev);
> @@ -5618,7 +5618,7 @@ static void macb_remove(struct platform_device *pdev)
> if (dev) {
> bp = netdev_priv(dev);
> unregister_netdev(dev);
> - phy_exit(bp->sgmii_phy);
> + phy_exit(bp->phy);
> mdiobus_unregister(bp->mii_bus);
> mdiobus_free(bp->mii_bus);
>
> @@ -5645,7 +5645,7 @@ static int __maybe_unused macb_suspend(struct device *dev)
> u32 tmp;
>
> if (!device_may_wakeup(&bp->dev->dev))
> - phy_exit(bp->sgmii_phy);
> + phy_exit(bp->phy);
>
> if (!netif_running(netdev))
> return 0;
> @@ -5774,7 +5774,7 @@ static int __maybe_unused macb_resume(struct device *dev)
> int err;
>
> if (!device_may_wakeup(&bp->dev->dev))
> - phy_init(bp->sgmii_phy);
> + phy_init(bp->phy);
>
> if (!netif_running(netdev))
> return 0;
>
> --
> 2.51.1
>
next prev parent reply other threads:[~2025-10-30 14:34 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-23 16:22 [PATCH net-next v3 0/5] net: macb: EyeQ5 support Théo Lebrun
2025-10-23 16:22 ` [PATCH net-next v3 1/5] dt-bindings: net: cdns,macb: add Mobileye EyeQ5 ethernet interface Théo Lebrun
2025-10-23 16:22 ` [PATCH net-next v3 2/5] net: macb: match skb_reserve(skb, NET_IP_ALIGN) with HW alignment Théo Lebrun
2025-10-23 19:07 ` Andrew Lunn
2025-10-30 14:31 ` Nicolas Ferre
2025-10-23 16:22 ` [PATCH net-next v3 3/5] net: macb: add no LSO capability (MACB_CAPS_NO_LSO) Théo Lebrun
2025-10-30 14:32 ` Nicolas Ferre
2025-10-23 16:22 ` [PATCH net-next v3 4/5] net: macb: rename bp->sgmii_phy field to bp->phy Théo Lebrun
2025-10-30 14:34 ` Nicolas Ferre [this message]
2025-10-23 16:22 ` [PATCH net-next v3 5/5] net: macb: Add "mobileye,eyeq5-gem" compatible Théo Lebrun
2025-10-23 19:08 ` Andrew Lunn
2025-10-30 14:37 ` Nicolas Ferre
2026-02-26 10:46 ` Conor Dooley
2026-02-26 19:24 ` Russell King (Oracle)
2026-02-26 20:20 ` Conor Dooley
2026-02-26 20:44 ` Russell King (Oracle)
2026-02-26 21:05 ` Conor Dooley
2026-02-26 21:13 ` Andrew Lunn
2025-10-28 14:20 ` [PATCH net-next v3 0/5] net: macb: EyeQ5 support patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cd0ae7c8-0df7-443f-a5d3-da2c3aa88582@microchip.com \
--to=nicolas.ferre@microchip.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=benoit.monin@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=gregory.clement@bootlin.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=tawfik.bayouk@mobileye.com \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox