Re: [PATCH v2 15/17] soc: qcom: ipa: support build of IPA code

[Alex Elder <elder@linaro.org>]

On 3/11/20 5:54 AM, Jon Hunter wrote:
> 
> On 06/03/2020 04:28, Alex Elder wrote:
>> Add build and Kconfig support for the Qualcomm IPA driver.
>>
>> Signed-off-by: Alex Elder <elder@linaro.org>
>> ---
>>  drivers/net/Kconfig      |  2 ++
>>  drivers/net/Makefile     |  1 +
>>  drivers/net/ipa/Kconfig  | 19 +++++++++++++++++++
>>  drivers/net/ipa/Makefile | 12 ++++++++++++
>>  4 files changed, 34 insertions(+)
>>  create mode 100644 drivers/net/ipa/Kconfig
>>  create mode 100644 drivers/net/ipa/Makefile
>>
>> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
>> index 66e410e58c8e..02565bc2be8a 100644
>> --- a/drivers/net/Kconfig
>> +++ b/drivers/net/Kconfig
>> @@ -444,6 +444,8 @@ source "drivers/net/fddi/Kconfig"
>>  
>>  source "drivers/net/hippi/Kconfig"
>>  
>> +source "drivers/net/ipa/Kconfig"
>> +
>>  config NET_SB1000
>>  	tristate "General Instruments Surfboard 1000"
>>  	depends on PNP
>> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
>> index 65967246f240..94b60800887a 100644
>> --- a/drivers/net/Makefile
>> +++ b/drivers/net/Makefile
>> @@ -47,6 +47,7 @@ obj-$(CONFIG_ETHERNET) += ethernet/
>>  obj-$(CONFIG_FDDI) += fddi/
>>  obj-$(CONFIG_HIPPI) += hippi/
>>  obj-$(CONFIG_HAMRADIO) += hamradio/
>> +obj-$(CONFIG_QCOM_IPA) += ipa/
>>  obj-$(CONFIG_PLIP) += plip/
>>  obj-$(CONFIG_PPP) += ppp/
>>  obj-$(CONFIG_PPP_ASYNC) += ppp/
>> diff --git a/drivers/net/ipa/Kconfig b/drivers/net/ipa/Kconfig
>> new file mode 100644
>> index 000000000000..b8cb7cadbf75
>> --- /dev/null
>> +++ b/drivers/net/ipa/Kconfig
>> @@ -0,0 +1,19 @@
>> +config QCOM_IPA
>> +	tristate "Qualcomm IPA support"
>> +	depends on ARCH_QCOM && 64BIT && NET
>> +	select QCOM_QMI_HELPERS
>> +	select QCOM_MDT_LOADER
>> +	default QCOM_Q6V5_COMMON
>> +	help
>> +	  Choose Y or M here to include support for the Qualcomm
>> +	  IP Accelerator (IPA), a hardware block present in some
>> +	  Qualcomm SoCs.  The IPA is a programmable protocol processor
>> +	  that is capable of generic hardware handling of IP packets,
>> +	  including routing, filtering, and NAT.  Currently the IPA
>> +	  driver supports only basic transport of network traffic
>> +	  between the AP and modem, on the Qualcomm SDM845 SoC.
>> +
>> +	  Note that if selected, the selection type must match that
>> +	  of QCOM_Q6V5_COMMON (Y or M).
>> +
>> +	  If unsure, say N.
>> diff --git a/drivers/net/ipa/Makefile b/drivers/net/ipa/Makefile
>> new file mode 100644
>> index 000000000000..afe5df1e6eee
>> --- /dev/null
>> +++ b/drivers/net/ipa/Makefile
>> @@ -0,0 +1,12 @@
>> +# Un-comment the next line if you want to validate configuration data
>> +#ccflags-y		+=	-DIPA_VALIDATE
>> +
>> +obj-$(CONFIG_QCOM_IPA)	+=	ipa.o
>> +
>> +ipa-y			:=	ipa_main.o ipa_clock.o ipa_reg.o ipa_mem.o \
>> +				ipa_table.o ipa_interrupt.o gsi.o gsi_trans.o \
>> +				ipa_gsi.o ipa_smp2p.o ipa_uc.o \
>> +				ipa_endpoint.o ipa_cmd.o ipa_modem.o \
>> +				ipa_qmi.o ipa_qmi_msg.o
>> +
>> +ipa-y			+=	ipa_data-sdm845.o ipa_data-sc7180.
Yes, a needed patch defining field_max() is missing.  I sent
an updated request to include it in net-next to resolve this
issue.

  https://lore.kernel.org/netdev/20200311024240.26834-1-elder@linaro.org/

Thank you for pointing it out.

					-Alex

> This patch is also causing build issues on the current -next ...
> 
>   CC [M]  drivers/net/ipa/gsi.o
>   In file included from include/linux/build_bug.h:5:0,
>                    from include/linux/bitfield.h:10,
>                    from drivers/net/ipa/gsi.c:9:
>   drivers/net/ipa/gsi.c: In function ‘gsi_validate_build’:
>   drivers/net/ipa/gsi.c:220:39: error: implicit declaration of function ‘field_max’ [-Werror=implicit-function-declaration]
>     BUILD_BUG_ON(GSI_RING_ELEMENT_SIZE > field_max(ELEMENT_SIZE_FMASK));
>                                          ^
>   include/linux/compiler.h:374:9: note: in definition of macro ‘__compiletime_assert’
>      if (!(condition))     \
>            ^~~~~~~~~
>   include/linux/compiler.h:394:2: note: in expansion of macro ‘_compiletime_assert’
>     _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
>     ^~~~~~~~~~~~~~~~~~~
>   include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
>    #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
>                                        ^~~~~~~~~~~~~~~~~~
>   include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
>     BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
>     ^~~~~~~~~~~~~~~~
>   drivers/net/ipa/gsi.c:220:2: note: in expansion of macro ‘BUILD_BUG_ON’
>     BUILD_BUG_ON(GSI_RING_ELEMENT_SIZE > field_max(ELEMENT_SIZE_FMASK));
>     ^~~~~~~~~~~~
> 
> Jon 
>