* [PATCH 00/21] pr_dbg, pr_fmt
@ 2009-10-05 0:53 Joe Perches
2009-10-05 0:53 ` [PATCH 19/21] drivers/net/bonding/: : use pr_fmt Joe Perches
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Joe Perches @ 2009-10-05 0:53 UTC (permalink / raw)
To: linux-kernel
Cc: x86, kvm, Frederic Weisbecker, Andreas Herrmann, H. Peter Anvin,
Samuel Chessman, Thomas Gleixner, Herbert Xu, Jay Vosburgh,
bonding-devel, Ingo Molnar, Avi Kivity, linux-crypto, Len Brown,
amd64-microcode, Joerg Roedel, Maciej Sosnowski, Steven Rostedt,
Marcelo Tosatti, linux-pm, Dan Williams, netdev, Tigran
One possible long term goal is to stop adding
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
to source files to prefix modulename to logging output.
It might be useful to eventually have kernel.h
use a standard #define pr_fmt which includes KBUILD_MODNAME
instead of a blank or empty define.
Perhaps over time, the source modules that use pr_<level>
with prefixes can be converted to use pr_fmt.
If all modules are converted, that will allow the printk
routine to add module/filename/line/offset to the logging
lines using some function similar to dynamic_debug and
substantially reduct object string use by removing the
repeated prefixes.
This patchset does not get to that result. The patches
right now uses _more_ string space because all logging
messages have unshared prefixes but it may be a useful start.
The patchset strips prefixes from printks and adds pr_fmt to
arch/x86, crypto, kernel, and a few drivers.
It also converts printk(KERN_<level> to pr_<level> in a few files
that already had some pr_<level> uses.
The conversion also generally used long length format strings
in the place of multiple short strings to ease any grep/search.
Joe Perches (21):
include/linux/ dynamic_debug.h kernel.h: Remove KBUILD_MODNAME from dynamic_pr_debug, add #define pr_dbg
ftrace.c: Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
mtrr: use pr_<level> and pr_fmt
microcode: use pr_<level> and add pr_fmt
amd_iommu.c: use pr_<level> and add pr_fmt(fmt)
es7000_32.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/apic/: use pr_<level> and add pr_fmt(fmt)
mcheck/: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/setup_percpu.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/kernel/cpu/: use pr_<level> and add pr_fmt(fmt)
i8254.c: Add pr_fmt(fmt)
kmmio.c: Add and use pr_fmt(fmt)
testmmiotrace.c: Add and use pr_fmt(fmt)
crypto/: use pr_<level> and add pr_fmt(fmt)
kernel/power/: use pr_<level> and add pr_fmt(fmt)
kernel/kexec.c: use pr_<level> and add pr_fmt(fmt)
crypto/async_tx/raid6test.c: use pr_<level> and add pr_fmt(fmt)
arch/x86/mm/mmio-mod.c: use pr_fmt
drivers/net/bonding/: : use pr_fmt
drivers/net/tlan: use pr_<level> and add pr_fmt(fmt)
drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg(
arch/x86/kernel/amd_iommu.c | 71 ++--
arch/x86/kernel/apic/apic.c | 48 ++--
arch/x86/kernel/apic/apic_flat_64.c | 5 +-
arch/x86/kernel/apic/bigsmp_32.c | 8 +-
arch/x86/kernel/apic/es7000_32.c | 12 +-
arch/x86/kernel/apic/io_apic.c | 239 ++++++------
arch/x86/kernel/apic/nmi.c | 29 +-
arch/x86/kernel/apic/numaq_32.c | 53 ++--
arch/x86/kernel/apic/probe_32.c | 18 +-
arch/x86/kernel/apic/probe_64.c | 8 +-
arch/x86/kernel/apic/summit_32.c | 23 +-
arch/x86/kernel/apic/x2apic_uv_x.c | 26 +-
arch/x86/kernel/cpu/addon_cpuid_features.c | 9 +-
arch/x86/kernel/cpu/amd.c | 26 +-
arch/x86/kernel/cpu/bugs.c | 23 +-
arch/x86/kernel/cpu/bugs_64.c | 4 +-
arch/x86/kernel/cpu/centaur.c | 12 +-
arch/x86/kernel/cpu/common.c | 54 ++--
arch/x86/kernel/cpu/cpu_debug.c | 4 +-
arch/x86/kernel/cpu/cyrix.c | 12 +-
arch/x86/kernel/cpu/intel.c | 14 +-
arch/x86/kernel/cpu/intel_cacheinfo.c | 14 +-
arch/x86/kernel/cpu/mcheck/mce-inject.c | 20 +-
arch/x86/kernel/cpu/mcheck/mce.c | 59 ++--
arch/x86/kernel/cpu/mcheck/mce_intel.c | 8 +-
arch/x86/kernel/cpu/mcheck/p5.c | 21 +-
arch/x86/kernel/cpu/mcheck/therm_throt.c | 21 +-
arch/x86/kernel/cpu/mcheck/threshold.c | 7 +-
arch/x86/kernel/cpu/mcheck/winchip.c | 8 +-
arch/x86/kernel/cpu/mtrr/centaur.c | 4 +-
arch/x86/kernel/cpu/mtrr/cleanup.c | 59 ++--
arch/x86/kernel/cpu/mtrr/generic.c | 39 +-
arch/x86/kernel/cpu/mtrr/main.c | 32 +-
arch/x86/kernel/cpu/perf_event.c | 10 +-
arch/x86/kernel/cpu/perfctr-watchdog.c | 11 +-
arch/x86/kernel/cpu/transmeta.c | 20 +-
arch/x86/kernel/cpu/vmware.c | 11 +-
arch/x86/kernel/ftrace.c | 8 +-
arch/x86/kernel/microcode_amd.c | 5 +-
arch/x86/kernel/microcode_core.c | 23 +-
arch/x86/kernel/microcode_intel.c | 47 +--
arch/x86/kernel/setup_percpu.c | 13 +-
arch/x86/kvm/i8254.c | 12 +-
arch/x86/mm/kmmio.c | 40 +-
arch/x86/mm/mmio-mod.c | 71 ++--
arch/x86/mm/testmmiotrace.c | 29 +-
crypto/algapi.c | 4 +-
crypto/ansi_cprng.c | 39 +-
crypto/async_tx/async_tx.c | 5 +-
crypto/async_tx/raid6test.c | 30 +-
crypto/fips.c | 4 +-
crypto/tcrypt.c | 75 ++--
crypto/testmgr.c | 286 ++++++--------
crypto/xor.c | 17 +-
drivers/net/bonding/bond_3ad.c | 171 +++++----
drivers/net/bonding/bond_alb.c | 38 +--
drivers/net/bonding/bond_ipv6.c | 12 +-
drivers/net/bonding/bond_main.c | 608 +++++++++++-----------------
drivers/net/bonding/bond_sysfs.c | 322 ++++++---------
drivers/net/tlan.c | 135 +++---
drivers/net/tlan.h | 2 +-
include/linux/dynamic_debug.h | 13 +-
include/linux/kernel.h | 7 +-
kernel/kexec.c | 21 +-
kernel/power/hibernate.c | 46 +--
kernel/power/hibernate_nvs.c | 6 +-
kernel/power/process.c | 29 +-
kernel/power/snapshot.c | 36 +-
kernel/power/suspend.c | 18 +-
kernel/power/suspend_test.c | 18 +-
kernel/power/swap.c | 42 +-
kernel/power/swsusp.c | 10 +-
kernel/power/user.c | 8 +-
73 files changed, 1543 insertions(+), 1749 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 19/21] drivers/net/bonding/: : use pr_fmt
2009-10-05 0:53 [PATCH 00/21] pr_dbg, pr_fmt Joe Perches
@ 2009-10-05 0:53 ` Joe Perches
2009-10-05 7:12 ` David Miller
2009-10-05 0:53 ` [PATCH 20/21] drivers/net/tlan: use pr_<level> and add pr_fmt(fmt) Joe Perches
2009-10-05 0:53 ` [PATCH 21/21] drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg( Joe Perches
2 siblings, 1 reply; 11+ messages in thread
From: Joe Perches @ 2009-10-05 0:53 UTC (permalink / raw)
To: linux-kernel; +Cc: Jay Vosburgh, bonding-devel, netdev
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME from pr_<level>s
Consolidate long format strings
Remove some extra tab indents
Remove some unnecessary ()s from pr_<level>s arguments
Align pr_<level> arguments
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/bonding/bond_3ad.c | 171 ++++++-----
drivers/net/bonding/bond_alb.c | 38 +--
drivers/net/bonding/bond_ipv6.c | 12 +-
drivers/net/bonding/bond_main.c | 608 ++++++++++++++------------------------
drivers/net/bonding/bond_sysfs.c | 322 ++++++++------------
5 files changed, 464 insertions(+), 687 deletions(-)
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index c3fa31c..b1a7dac 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -20,6 +20,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/skbuff.h>
#include <linux/if_ether.h>
#include <linux/netdevice.h>
@@ -352,7 +354,8 @@ static u16 __get_link_speed(struct port *port)
}
}
- pr_debug("Port %d Received link speed %d update from adapter\n", port->actor_port_number, speed);
+ pr_debug("Port %d Received link speed %d update from adapter\n",
+ port->actor_port_number, speed);
return speed;
}
@@ -378,12 +381,14 @@ static u8 __get_duplex(struct port *port)
switch (slave->duplex) {
case DUPLEX_FULL:
retval=0x1;
- pr_debug("Port %d Received status full duplex update from adapter\n", port->actor_port_number);
+ pr_debug("Port %d Received status full duplex update from adapter\n",
+ port->actor_port_number);
break;
case DUPLEX_HALF:
default:
retval=0x0;
- pr_debug("Port %d Received status NOT full duplex update from adapter\n", port->actor_port_number);
+ pr_debug("Port %d Received status NOT full duplex update from adapter\n",
+ port->actor_port_number);
break;
}
}
@@ -978,7 +983,9 @@ static void ad_mux_machine(struct port *port)
// check if the state machine was changed
if (port->sm_mux_state != last_state) {
- pr_debug("Mux Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, port->sm_mux_state);
+ pr_debug("Mux Machine: Port=%d, Last State=%d, Curr State=%d\n",
+ port->actor_port_number, last_state,
+ port->sm_mux_state);
switch (port->sm_mux_state) {
case AD_MUX_DETACHED:
__detach_bond_from_agg(port);
@@ -1077,7 +1084,9 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
// check if the State machine was changed or new lacpdu arrived
if ((port->sm_rx_state != last_state) || (lacpdu)) {
- pr_debug("Rx Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, port->sm_rx_state);
+ pr_debug("Rx Machine: Port=%d, Last State=%d, Curr State=%d\n",
+ port->actor_port_number, last_state,
+ port->sm_rx_state);
switch (port->sm_rx_state) {
case AD_RX_INITIALIZE:
if (!(port->actor_oper_port_key & AD_DUPLEX_KEY_BITS)) {
@@ -1124,9 +1133,8 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
// detect loopback situation
if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) {
// INFO_RECEIVED_LOOPBACK_FRAMES
- pr_err(DRV_NAME ": %s: An illegal loopback occurred on "
- "adapter (%s). Check the configuration to verify that all "
- "Adapters are connected to 802.3ad compliant switch ports\n",
+ pr_err("%s: An illegal loopback occurred on adapter (%s).\n"
+ "Check the configuration to verify that all adapters are connected to 802.3ad compliant switch ports\n",
port->slave->dev->master->name, port->slave->dev->name);
__release_rx_machine_lock(port);
return;
@@ -1165,7 +1173,8 @@ static void ad_tx_machine(struct port *port)
__update_lacpdu_from_port(port);
if (ad_lacpdu_send(port) >= 0) {
- pr_debug("Sent LACPDU on port %d\n", port->actor_port_number);
+ pr_debug("Sent LACPDU on port %d\n",
+ port->actor_port_number);
/* mark ntt as false, so it will not be sent again until
demanded */
@@ -1240,7 +1249,9 @@ static void ad_periodic_machine(struct port *port)
// check if the state machine was changed
if (port->sm_periodic_state != last_state) {
- pr_debug("Periodic Machine: Port=%d, Last State=%d, Curr State=%d\n", port->actor_port_number, last_state, port->sm_periodic_state);
+ pr_debug("Periodic Machine: Port=%d, Last State=%d, Curr State=%d\n",
+ port->actor_port_number, last_state,
+ port->sm_periodic_state);
switch (port->sm_periodic_state) {
case AD_NO_PERIODIC:
port->sm_periodic_timer_counter = 0; // zero timer
@@ -1297,7 +1308,9 @@ static void ad_port_selection_logic(struct port *port)
port->next_port_in_aggregator=NULL;
port->actor_port_aggregator_identifier=0;
- pr_debug("Port %d left LAG %d\n", port->actor_port_number, temp_aggregator->aggregator_identifier);
+ pr_debug("Port %d left LAG %d\n",
+ port->actor_port_number,
+ temp_aggregator->aggregator_identifier);
// if the aggregator is empty, clear its parameters, and set it ready to be attached
if (!temp_aggregator->lag_ports) {
ad_clear_agg(temp_aggregator);
@@ -1306,9 +1319,7 @@ static void ad_port_selection_logic(struct port *port)
}
}
if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list
- pr_warning(DRV_NAME ": %s: Warning: Port %d (on %s) "
- "was related to aggregator %d but was not "
- "on its port list\n",
+ pr_warning("%s: Warning: Port %d (on %s) was related to aggregator %d but was not on its port list\n",
port->slave->dev->master->name,
port->actor_port_number,
port->slave->dev->name,
@@ -1342,7 +1353,9 @@ static void ad_port_selection_logic(struct port *port)
port->next_port_in_aggregator=aggregator->lag_ports;
port->aggregator->num_of_ports++;
aggregator->lag_ports=port;
- pr_debug("Port %d joined LAG %d(existing LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier);
+ pr_debug("Port %d joined LAG %d(existing LAG)\n",
+ port->actor_port_number,
+ port->aggregator->aggregator_identifier);
// mark this port as selected
port->sm_vars |= AD_PORT_SELECTED;
@@ -1379,10 +1392,11 @@ static void ad_port_selection_logic(struct port *port)
// mark this port as selected
port->sm_vars |= AD_PORT_SELECTED;
- pr_debug("Port %d joined LAG %d(new LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier);
+ pr_debug("Port %d joined LAG %d(new LAG)\n",
+ port->actor_port_number,
+ port->aggregator->aggregator_identifier);
} else {
- pr_err(DRV_NAME ": %s: Port %d (on %s) did not find "
- "a suitable aggregator\n",
+ pr_err("%s: Port %d (on %s) did not find a suitable aggregator\n",
port->slave->dev->master->name,
port->actor_port_number, port->slave->dev->name);
}
@@ -1459,8 +1473,7 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best,
break;
default:
- pr_warning(DRV_NAME
- ": %s: Impossible agg select mode %d\n",
+ pr_warning("%s: Impossible agg select mode %d\n",
curr->slave->dev->master->name,
__get_agg_selection_mode(curr->lag_ports));
break;
@@ -1545,40 +1558,38 @@ static void ad_agg_selection_logic(struct aggregator *agg)
// if there is new best aggregator, activate it
if (best) {
pr_debug("best Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
- best->aggregator_identifier, best->num_of_ports,
- best->actor_oper_aggregator_key,
- best->partner_oper_aggregator_key,
- best->is_individual, best->is_active);
+ best->aggregator_identifier, best->num_of_ports,
+ best->actor_oper_aggregator_key,
+ best->partner_oper_aggregator_key,
+ best->is_individual, best->is_active);
pr_debug("best ports %p slave %p %s\n",
- best->lag_ports, best->slave,
- best->slave ? best->slave->dev->name : "NULL");
+ best->lag_ports, best->slave,
+ best->slave ? best->slave->dev->name : "NULL");
for (agg = __get_first_agg(best->lag_ports); agg;
agg = __get_next_agg(agg)) {
pr_debug("Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
- agg->aggregator_identifier, agg->num_of_ports,
- agg->actor_oper_aggregator_key,
- agg->partner_oper_aggregator_key,
- agg->is_individual, agg->is_active);
+ agg->aggregator_identifier, agg->num_of_ports,
+ agg->actor_oper_aggregator_key,
+ agg->partner_oper_aggregator_key,
+ agg->is_individual, agg->is_active);
}
// check if any partner replys
if (best->is_individual) {
- pr_warning(DRV_NAME ": %s: Warning: No 802.3ad"
- " response from the link partner for any"
- " adapters in the bond\n",
- best->slave->dev->master->name);
+ pr_warning("%s: Warning: No 802.3ad response from the link partner for any adapters in the bond\n",
+ best->slave->dev->master->name);
}
best->is_active = 1;
pr_debug("LAG %d chosen as the active LAG\n",
- best->aggregator_identifier);
+ best->aggregator_identifier);
pr_debug("Agg=%d; P=%d; a k=%d; p k=%d; Ind=%d; Act=%d\n",
- best->aggregator_identifier, best->num_of_ports,
- best->actor_oper_aggregator_key,
- best->partner_oper_aggregator_key,
- best->is_individual, best->is_active);
+ best->aggregator_identifier, best->num_of_ports,
+ best->actor_oper_aggregator_key,
+ best->partner_oper_aggregator_key,
+ best->is_individual, best->is_active);
// disable the ports that were related to the former active_aggregator
if (active) {
@@ -1632,7 +1643,8 @@ static void ad_clear_agg(struct aggregator *aggregator)
aggregator->lag_ports = NULL;
aggregator->is_active = 0;
aggregator->num_of_ports = 0;
- pr_debug("LAG %d was cleared\n", aggregator->aggregator_identifier);
+ pr_debug("LAG %d was cleared\n",
+ aggregator->aggregator_identifier);
}
}
@@ -1727,7 +1739,9 @@ static void ad_initialize_port(struct port *port, int lacp_fast)
static void ad_enable_collecting_distributing(struct port *port)
{
if (port->aggregator->is_active) {
- pr_debug("Enabling port %d(LAG %d)\n", port->actor_port_number, port->aggregator->aggregator_identifier);
+ pr_debug("Enabling port %d(LAG %d)\n",
+ port->actor_port_number,
+ port->aggregator->aggregator_identifier);
__enable_port(port);
}
}
@@ -1740,7 +1754,9 @@ static void ad_enable_collecting_distributing(struct port *port)
static void ad_disable_collecting_distributing(struct port *port)
{
if (port->aggregator && MAC_ADDRESS_COMPARE(&(port->aggregator->partner_system), &(null_mac_addr))) {
- pr_debug("Disabling port %d(LAG %d)\n", port->actor_port_number, port->aggregator->aggregator_identifier);
+ pr_debug("Disabling port %d(LAG %d)\n",
+ port->actor_port_number,
+ port->aggregator->aggregator_identifier);
__disable_port(port);
}
}
@@ -1778,7 +1794,8 @@ static void ad_marker_info_send(struct port *port)
// send the marker information
if (ad_marker_send(port, &marker) >= 0) {
- pr_debug("Sent Marker Information on port %d\n", port->actor_port_number);
+ pr_debug("Sent Marker Information on port %d\n",
+ port->actor_port_number);
}
}
#endif
@@ -1802,7 +1819,8 @@ static void ad_marker_info_received(struct bond_marker *marker_info,
// send the marker response
if (ad_marker_send(port, &marker) >= 0) {
- pr_debug("Sent Marker Response on port %d\n", port->actor_port_number);
+ pr_debug("Sent Marker Response on port %d\n",
+ port->actor_port_number);
}
}
@@ -1888,8 +1906,7 @@ int bond_3ad_bind_slave(struct slave *slave)
struct aggregator *aggregator;
if (bond == NULL) {
- pr_err(DRV_NAME ": %s: The slave %s is not attached to "
- "its bond\n",
+ pr_err("%s: The slave %s is not attached to its bond\n",
slave->dev->master->name, slave->dev->name);
return -1;
}
@@ -1965,13 +1982,13 @@ void bond_3ad_unbind_slave(struct slave *slave)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- pr_warning(DRV_NAME ": Warning: %s: Trying to "
- "unbind an uninitialized port on %s\n",
+ pr_warning("Warning: %s: Trying to unbind an uninitialized port on %s\n",
slave->dev->master->name, slave->dev->name);
return;
}
- pr_debug("Unbinding Link Aggregation Group %d\n", aggregator->aggregator_identifier);
+ pr_debug("Unbinding Link Aggregation Group %d\n",
+ aggregator->aggregator_identifier);
/* Tell the partner that this port is not suitable for aggregation */
port->actor_oper_port_state &= ~AD_STATE_AGGREGATION;
@@ -1995,10 +2012,12 @@ void bond_3ad_unbind_slave(struct slave *slave)
// if new aggregator found, copy the aggregator's parameters
// and connect the related lag_ports to the new aggregator
if ((new_aggregator) && ((!new_aggregator->lag_ports) || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator))) {
- pr_debug("Some port(s) related to LAG %d - replaceing with LAG %d\n", aggregator->aggregator_identifier, new_aggregator->aggregator_identifier);
+ pr_debug("Some port(s) related to LAG %d - replaceing with LAG %d\n",
+ aggregator->aggregator_identifier,
+ new_aggregator->aggregator_identifier);
if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) {
- pr_info(DRV_NAME ": %s: Removing an active aggregator\n",
+ pr_info("%s: Removing an active aggregator\n",
aggregator->slave->dev->master->name);
// select new active aggregator
select_new_active_agg = 1;
@@ -2029,8 +2048,7 @@ void bond_3ad_unbind_slave(struct slave *slave)
ad_agg_selection_logic(__get_first_agg(port));
}
} else {
- pr_warning(DRV_NAME ": %s: Warning: unbinding aggregator, "
- "and could not find a new aggregator for its ports\n",
+ pr_warning("%s: Warning: unbinding aggregator, and could not find a new aggregator for its ports\n",
slave->dev->master->name);
}
} else { // in case that the only port related to this aggregator is the one we want to remove
@@ -2038,7 +2056,7 @@ void bond_3ad_unbind_slave(struct slave *slave)
// clear the aggregator
ad_clear_agg(aggregator);
if (select_new_active_agg) {
- pr_info(DRV_NAME ": %s: Removing an active aggregator\n",
+ pr_info("%s: Removing an active aggregator\n",
slave->dev->master->name);
// select new active aggregator
ad_agg_selection_logic(__get_first_agg(port));
@@ -2065,7 +2083,7 @@ void bond_3ad_unbind_slave(struct slave *slave)
// clear the aggregator
ad_clear_agg(temp_aggregator);
if (select_new_active_agg) {
- pr_info(DRV_NAME ": %s: Removing an active aggregator\n",
+ pr_info("%s: Removing an active aggregator\n",
slave->dev->master->name);
// select new active aggregator
ad_agg_selection_logic(__get_first_agg(port));
@@ -2114,8 +2132,8 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
// select the active aggregator for the bond
if ((port = __get_first_port(bond))) {
if (!port->slave) {
- pr_warning(DRV_NAME ": %s: Warning: bond's first port is "
- "uninitialized\n", bond->dev->name);
+ pr_warning("%s: Warning: bond's first port is uninitialized\n",
+ bond->dev->name);
goto re_arm;
}
@@ -2128,8 +2146,8 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
// for each port run the state machines
for (port = __get_first_port(bond); port; port = __get_next_port(port)) {
if (!port->slave) {
- pr_warning(DRV_NAME ": %s: Warning: Found an uninitialized "
- "port\n", bond->dev->name);
+ pr_warning("%s: Warning: Found an uninitialized port\n",
+ bond->dev->name);
goto re_arm;
}
@@ -2170,15 +2188,15 @@ static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u
port = &(SLAVE_AD_INFO(slave).port);
if (!port->slave) {
- pr_warning(DRV_NAME ": %s: Warning: port of slave %s "
- "is uninitialized\n",
+ pr_warning("%s: Warning: port of slave %s is uninitialized\n",
slave->dev->name, slave->dev->master->name);
return;
}
switch (lacpdu->subtype) {
case AD_TYPE_LACPDU:
- pr_debug("Received LACPDU on port %d\n", port->actor_port_number);
+ pr_debug("Received LACPDU on port %d\n",
+ port->actor_port_number);
ad_rx_machine(lacpdu, port);
break;
@@ -2187,17 +2205,20 @@ static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u
switch (((struct bond_marker *)lacpdu)->tlv_type) {
case AD_MARKER_INFORMATION_SUBTYPE:
- pr_debug("Received Marker Information on port %d\n", port->actor_port_number);
+ pr_debug("Received Marker Information on port %d\n",
+ port->actor_port_number);
ad_marker_info_received((struct bond_marker *)lacpdu, port);
break;
case AD_MARKER_RESPONSE_SUBTYPE:
- pr_debug("Received Marker Response on port %d\n", port->actor_port_number);
+ pr_debug("Received Marker Response on port %d\n",
+ port->actor_port_number);
ad_marker_response_received((struct bond_marker *)lacpdu, port);
break;
default:
- pr_debug("Received an unknown Marker subtype on slot %d\n", port->actor_port_number);
+ pr_debug("Received an unknown Marker subtype on slot %d\n",
+ port->actor_port_number);
}
}
}
@@ -2217,8 +2238,7 @@ void bond_3ad_adapter_speed_changed(struct slave *slave)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- pr_warning(DRV_NAME ": Warning: %s: speed "
- "changed for uninitialized port on %s\n",
+ pr_warning("Warning: %s: speed changed for uninitialized port on %s\n",
slave->dev->master->name, slave->dev->name);
return;
}
@@ -2245,8 +2265,7 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- pr_warning(DRV_NAME ": %s: Warning: duplex changed "
- "for uninitialized port on %s\n",
+ pr_warning("%s: Warning: duplex changed for uninitialized port on %s\n",
slave->dev->master->name, slave->dev->name);
return;
}
@@ -2274,8 +2293,7 @@ void bond_3ad_handle_link_change(struct slave *slave, char link)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- pr_warning(DRV_NAME ": Warning: %s: link status changed for "
- "uninitialized port on %s\n",
+ pr_warning("Warning: %s: link status changed for uninitialized port on %s\n",
slave->dev->master->name, slave->dev->name);
return;
}
@@ -2380,8 +2398,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
}
if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
- pr_debug(DRV_NAME ": %s: Error: "
- "bond_3ad_get_active_agg_info failed\n", dev->name);
+ pr_debug("%s: Error: bond_3ad_get_active_agg_info failed\n",
+ dev->name);
goto out;
}
@@ -2390,8 +2408,7 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
if (slaves_in_agg == 0) {
/*the aggregator is empty*/
- pr_debug(DRV_NAME ": %s: Error: active aggregator is empty\n",
- dev->name);
+ pr_debug("%s: Error: active aggregator is empty\n", dev->name);
goto out;
}
@@ -2409,8 +2426,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
}
if (slave_agg_no >= 0) {
- pr_err(DRV_NAME ": %s: Error: Couldn't find a slave to tx on "
- "for aggregator ID %d\n", dev->name, agg_id);
+ pr_err("%s: Error: Couldn't find a slave to tx on for aggregator ID %d\n",
+ dev->name, agg_id);
goto out;
}
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 9b5936f..2d39667 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -20,6 +20,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
@@ -201,8 +203,7 @@ static int tlb_initialize(struct bonding *bond)
new_hashtbl = kzalloc(size, GFP_KERNEL);
if (!new_hashtbl) {
- pr_err(DRV_NAME
- ": %s: Error: Failed to allocate TLB hash table\n",
+ pr_err("%s: Error: Failed to allocate TLB hash table\n",
bond->dev->name);
return -1;
}
@@ -517,8 +518,7 @@ static void rlb_update_client(struct rlb_client_info *client_info)
client_info->slave->dev->dev_addr,
client_info->mac_dst);
if (!skb) {
- pr_err(DRV_NAME
- ": %s: Error: failed to create an ARP packet\n",
+ pr_err("%s: Error: failed to create an ARP packet\n",
client_info->slave->dev->master->name);
continue;
}
@@ -528,8 +528,7 @@ static void rlb_update_client(struct rlb_client_info *client_info)
if (client_info->tag) {
skb = vlan_put_tag(skb, client_info->vlan_id);
if (!skb) {
- pr_err(DRV_NAME
- ": %s: Error: failed to insert VLAN tag\n",
+ pr_err("%s: Error: failed to insert VLAN tag\n",
client_info->slave->dev->master->name);
continue;
}
@@ -612,9 +611,7 @@ static void rlb_req_update_subnet_clients(struct bonding *bond, __be32 src_ip)
client_info = &(bond_info->rx_hashtbl[hash_index]);
if (!client_info->slave) {
- pr_err(DRV_NAME
- ": %s: Error: found a client with no channel in "
- "the client's hash table\n",
+ pr_err("%s: Error: found a client with no channel in the client's hash table\n",
bond->dev->name);
continue;
}
@@ -809,8 +806,7 @@ static int rlb_initialize(struct bonding *bond)
new_hashtbl = kmalloc(size, GFP_KERNEL);
if (!new_hashtbl) {
- pr_err(DRV_NAME
- ": %s: Error: Failed to allocate RLB hash table\n",
+ pr_err("%s: Error: Failed to allocate RLB hash table\n",
bond->dev->name);
return -1;
}
@@ -931,8 +927,7 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[])
skb = vlan_put_tag(skb, vlan->vlan_id);
if (!skb) {
- pr_err(DRV_NAME
- ": %s: Error: failed to insert VLAN tag\n",
+ pr_err("%s: Error: failed to insert VLAN tag\n",
bond->dev->name);
continue;
}
@@ -961,11 +956,8 @@ static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[], int hw)
memcpy(s_addr.sa_data, addr, dev->addr_len);
s_addr.sa_family = dev->type;
if (dev_set_mac_address(dev, &s_addr)) {
- pr_err(DRV_NAME
- ": %s: Error: dev_set_mac_address of dev %s failed! ALB "
- "mode requires that the base driver support setting "
- "the hw address also when the network device's "
- "interface is open\n",
+ pr_err("%s: Error: dev_set_mac_address of dev %s failed!\n"
+ "ALB mode requires that the base driver support setting the hw address also when the network device's interface is open\n",
dev->master->name, dev->name);
return -EOPNOTSUPP;
}
@@ -1172,18 +1164,12 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
alb_set_slave_mac_addr(slave, free_mac_slave->perm_hwaddr,
bond->alb_info.rlb_enabled);
- pr_warning(DRV_NAME
- ": %s: Warning: the hw address of slave %s is "
- "in use by the bond; giving it the hw address "
- "of %s\n",
+ pr_warning("%s: Warning: the hw address of slave %s is in use by the bond; giving it the hw address of %s\n",
bond->dev->name, slave->dev->name,
free_mac_slave->dev->name);
} else if (has_bond_addr) {
- pr_err(DRV_NAME
- ": %s: Error: the hw address of slave %s is in use by the "
- "bond; couldn't find a slave with a free hw address to "
- "give it (this should not have happened)\n",
+ pr_err("%s: Error: the hw address of slave %s is in use by the bond; couldn't find a slave with a free hw address to give it (this should not have happened)\n",
bond->dev->name, slave->dev->name);
return -EFAULT;
}
diff --git a/drivers/net/bonding/bond_ipv6.c b/drivers/net/bonding/bond_ipv6.c
index 83921ab..c20b714 100644
--- a/drivers/net/bonding/bond_ipv6.c
+++ b/drivers/net/bonding/bond_ipv6.c
@@ -20,6 +20,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/if_vlan.h>
#include <net/ipv6.h>
@@ -73,20 +75,20 @@ static void bond_na_send(struct net_device *slave_dev,
addrconf_addr_solict_mult(daddr, &mcaddr);
pr_debug("ipv6 na on slave %s: dest %pI6, src %pI6\n",
- slave_dev->name, &mcaddr, daddr);
+ slave_dev->name, &mcaddr, daddr);
skb = ndisc_build_skb(slave_dev, &mcaddr, daddr, &icmp6h, daddr,
ND_OPT_TARGET_LL_ADDR);
if (!skb) {
- pr_err(DRV_NAME ": NA packet allocation failed\n");
+ pr_err("NA packet allocation failed\n");
return;
}
if (vlan_id) {
skb = vlan_put_tag(skb, vlan_id);
if (!skb) {
- pr_err(DRV_NAME ": failed to insert VLAN tag\n");
+ pr_err("failed to insert VLAN tag\n");
return;
}
}
@@ -108,8 +110,8 @@ void bond_send_unsolicited_na(struct bonding *bond)
struct inet6_dev *idev;
int is_router;
- pr_debug("bond_send_unsol_na: bond %s slave %s\n", bond->dev->name,
- slave ? slave->dev->name : "NULL");
+ pr_debug("%s: bond %s slave %s\n", bond->dev->name,
+ __func__, slave ? slave->dev->name : "NULL");
if (!slave || !bond->send_unsol_na ||
test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 69c5b15..ed09394 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -31,6 +31,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
@@ -247,7 +249,7 @@ static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id)
struct vlan_entry *vlan;
pr_debug("bond: %s, vlan id %d\n",
- (bond ? bond->dev->name : "None"), vlan_id);
+ (bond ? bond->dev->name : "None"), vlan_id);
vlan = kzalloc(sizeof(struct vlan_entry), GFP_KERNEL);
if (!vlan)
@@ -290,8 +292,8 @@ static int bond_del_vlan(struct bonding *bond, unsigned short vlan_id)
if (bond_is_lb(bond))
bond_alb_clear_vlan(bond, vlan_id);
- pr_debug("removed VLAN ID %d from bond %s\n", vlan_id,
- bond->dev->name);
+ pr_debug("removed VLAN ID %d from bond %s\n",
+ vlan_id, bond->dev->name);
kfree(vlan);
@@ -310,8 +312,8 @@ static int bond_del_vlan(struct bonding *bond, unsigned short vlan_id)
}
}
- pr_debug("couldn't find VLAN ID %d in bond %s\n", vlan_id,
- bond->dev->name);
+ pr_debug("couldn't find VLAN ID %d in bond %s\n",
+ vlan_id, bond->dev->name);
out:
write_unlock_bh(&bond->lock);
@@ -335,7 +337,7 @@ static int bond_has_challenged_slaves(struct bonding *bond)
bond_for_each_slave(bond, slave, i) {
if (slave->dev->features & NETIF_F_VLAN_CHALLENGED) {
pr_debug("found VLAN challenged slave - %s\n",
- slave->dev->name);
+ slave->dev->name);
return 1;
}
}
@@ -486,8 +488,7 @@ static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid)
res = bond_add_vlan(bond, vid);
if (res) {
- pr_err(DRV_NAME
- ": %s: Error: Failed to add vlan id %d\n",
+ pr_err("%s: Error: Failed to add vlan id %d\n",
bond_dev->name, vid);
}
}
@@ -521,8 +522,7 @@ static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid)
res = bond_del_vlan(bond, vid);
if (res) {
- pr_err(DRV_NAME
- ": %s: Error: Failed to remove vlan id %d\n",
+ pr_err("%s: Error: Failed to remove vlan id %d\n",
bond_dev->name, vid);
}
}
@@ -1040,8 +1040,7 @@ static void bond_do_fail_over_mac(struct bonding *bond,
rv = dev_set_mac_address(new_active->dev, &saddr);
if (rv) {
- pr_err(DRV_NAME
- ": %s: Error %d setting MAC of slave %s\n",
+ pr_err("%s: Error %d setting MAC of slave %s\n",
bond->dev->name, -rv, new_active->dev->name);
goto out;
}
@@ -1054,16 +1053,14 @@ static void bond_do_fail_over_mac(struct bonding *bond,
rv = dev_set_mac_address(old_active->dev, &saddr);
if (rv)
- pr_err(DRV_NAME
- ": %s: Error %d setting MAC of slave %s\n",
+ pr_err("%s: Error %d setting MAC of slave %s\n",
bond->dev->name, -rv, new_active->dev->name);
out:
read_lock(&bond->lock);
write_lock_bh(&bond->curr_slave_lock);
break;
default:
- pr_err(DRV_NAME
- ": %s: bond_do_fail_over_mac impossible: bad policy %d\n",
+ pr_err("%s: bond_do_fail_over_mac impossible: bad policy %d\n",
bond->dev->name, bond->params.fail_over_mac);
break;
}
@@ -1145,11 +1142,9 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
if (new_active->link == BOND_LINK_BACK) {
if (USES_PRIMARY(bond->params.mode)) {
- pr_info(DRV_NAME
- ": %s: making interface %s the new "
- "active one %d ms earlier.\n",
- bond->dev->name, new_active->dev->name,
- (bond->params.updelay - new_active->delay) * bond->params.miimon);
+ pr_info("%s: making interface %s the new active one %d ms earlier.\n",
+ bond->dev->name, new_active->dev->name,
+ (bond->params.updelay - new_active->delay) * bond->params.miimon);
}
new_active->delay = 0;
@@ -1162,10 +1157,8 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
} else {
if (USES_PRIMARY(bond->params.mode)) {
- pr_info(DRV_NAME
- ": %s: making interface %s the new "
- "active one.\n",
- bond->dev->name, new_active->dev->name);
+ pr_info("%s: making interface %s the new active one.\n",
+ bond->dev->name, new_active->dev->name);
}
}
}
@@ -1235,13 +1228,11 @@ void bond_select_active_slave(struct bonding *bond)
return;
if (netif_carrier_ok(bond->dev)) {
- pr_info(DRV_NAME
- ": %s: first active interface up!\n",
- bond->dev->name);
+ pr_info("%s: first active interface up!\n",
+ bond->dev->name);
} else {
- pr_info(DRV_NAME ": %s: "
- "now running without any active interface !\n",
- bond->dev->name);
+ pr_info("%s: now running without any active interface !\n",
+ bond->dev->name);
}
}
}
@@ -1390,16 +1381,14 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
slave_ops->ndo_do_ioctl == NULL) {
- pr_warning(DRV_NAME
- ": %s: Warning: no link monitoring support for %s\n",
- bond_dev->name, slave_dev->name);
+ pr_warning("%s: Warning: no link monitoring support for %s\n",
+ bond_dev->name, slave_dev->name);
}
/* bond must be initialized by bond_open() before enslaving */
if (!(bond_dev->flags & IFF_UP)) {
- pr_warning(DRV_NAME
- " %s: master_dev is not up in bond_enslave\n",
- bond_dev->name);
+ pr_warning("%s: master_dev is not up in bond_enslave\n",
+ bond_dev->name);
}
/* already enslaved */
@@ -1413,19 +1402,13 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
if (!list_empty(&bond->vlan_list)) {
- pr_err(DRV_NAME
- ": %s: Error: cannot enslave VLAN "
- "challenged slave %s on VLAN enabled "
- "bond %s\n", bond_dev->name, slave_dev->name,
- bond_dev->name);
+ pr_err("%s: Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n",
+ bond_dev->name, slave_dev->name, bond_dev->name);
return -EPERM;
} else {
- pr_warning(DRV_NAME
- ": %s: Warning: enslaved VLAN challenged "
- "slave %s. Adding VLANs will be blocked as "
- "long as %s is part of bond %s\n",
- bond_dev->name, slave_dev->name, slave_dev->name,
- bond_dev->name);
+ pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n",
+ bond_dev->name, slave_dev->name,
+ slave_dev->name, bond_dev->name);
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
}
} else {
@@ -1445,8 +1428,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
* enslaving it; the old ifenslave will not.
*/
if ((slave_dev->flags & IFF_UP)) {
- pr_err(DRV_NAME ": %s is up. "
- "This may be due to an out of date ifenslave.\n",
+ pr_err("%s is up. This may be due to an out of date ifenslave.\n",
slave_dev->name);
res = -EPERM;
goto err_undo_flags;
@@ -1462,7 +1444,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
if (bond->slave_cnt == 0) {
if (bond_dev->type != slave_dev->type) {
pr_debug("%s: change device type from %d to %d\n",
- bond_dev->name, bond_dev->type, slave_dev->type);
+ bond_dev->name,
+ bond_dev->type, slave_dev->type);
netdev_bonding_change(bond_dev, NETDEV_BONDING_OLDTYPE);
@@ -1474,28 +1457,21 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
netdev_bonding_change(bond_dev, NETDEV_BONDING_NEWTYPE);
}
} else if (bond_dev->type != slave_dev->type) {
- pr_err(DRV_NAME ": %s ether type (%d) is different "
- "from other slaves (%d), can not enslave it.\n",
- slave_dev->name,
- slave_dev->type, bond_dev->type);
- res = -EINVAL;
- goto err_undo_flags;
+ pr_err("%s ether type (%d) is different from other slaves (%d), can not enslave it.\n",
+ slave_dev->name,
+ slave_dev->type, bond_dev->type);
+ res = -EINVAL;
+ goto err_undo_flags;
}
if (slave_ops->ndo_set_mac_address == NULL) {
if (bond->slave_cnt == 0) {
- pr_warning(DRV_NAME
- ": %s: Warning: The first slave device "
- "specified does not support setting the MAC "
- "address. Setting fail_over_mac to active.",
- bond_dev->name);
+ pr_warning("%s: Warning: The first slave device specified does not support setting the MAC address. Setting fail_over_mac to active.",
+ bond_dev->name);
bond->params.fail_over_mac = BOND_FOM_ACTIVE;
} else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
- pr_err(DRV_NAME
- ": %s: Error: The slave device specified "
- "does not support setting the MAC address, "
- "but fail_over_mac is not set to active.\n"
- , bond_dev->name);
+ pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n",
+ bond_dev->name);
res = -EOPNOTSUPP;
goto err_undo_flags;
}
@@ -1622,22 +1598,12 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
* supported); thus, we don't need to change
* the messages for netif_carrier.
*/
- pr_warning(DRV_NAME
- ": %s: Warning: MII and ETHTOOL support not "
- "available for interface %s, and "
- "arp_interval/arp_ip_target module parameters "
- "not specified, thus bonding will not detect "
- "link failures! see bonding.txt for details.\n",
+ pr_warning("%s: Warning: MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details.\n",
bond_dev->name, slave_dev->name);
} else if (link_reporting == -1) {
/* unable get link status using mii/ethtool */
- pr_warning(DRV_NAME
- ": %s: Warning: can't get link status from "
- "interface %s; the network driver associated "
- "with this interface does not support MII or "
- "ETHTOOL link status reporting, thus miimon "
- "has no effect on this interface.\n",
- bond_dev->name, slave_dev->name);
+ pr_warning("%s: Warning: can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface.\n",
+ bond_dev->name, slave_dev->name);
}
}
@@ -1645,34 +1611,27 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
if (!bond->params.miimon ||
(bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS)) {
if (bond->params.updelay) {
- pr_debug("Initial state of slave_dev is "
- "BOND_LINK_BACK\n");
+ pr_debug("Initial state of slave_dev is BOND_LINK_BACK\n");
new_slave->link = BOND_LINK_BACK;
new_slave->delay = bond->params.updelay;
} else {
- pr_debug("Initial state of slave_dev is "
- "BOND_LINK_UP\n");
+ pr_debug("Initial state of slave_dev is BOND_LINK_UP\n");
new_slave->link = BOND_LINK_UP;
}
new_slave->jiffies = jiffies;
} else {
- pr_debug("Initial state of slave_dev is "
- "BOND_LINK_DOWN\n");
+ pr_debug("Initial state of slave_dev is BOND_LINK_DOWN\n");
new_slave->link = BOND_LINK_DOWN;
}
if (bond_update_speed_duplex(new_slave) &&
(new_slave->link != BOND_LINK_DOWN)) {
- pr_warning(DRV_NAME
- ": %s: Warning: failed to get speed and duplex from %s, "
- "assumed to be 100Mb/sec and Full.\n",
- bond_dev->name, new_slave->dev->name);
+ pr_warning("%s: Warning: failed to get speed and duplex from %s, assumed to be 100Mb/sec and Full.\n",
+ bond_dev->name, new_slave->dev->name);
if (bond->params.mode == BOND_MODE_8023AD) {
- pr_warning(DRV_NAME
- ": %s: Warning: Operation of 802.3ad mode requires ETHTOOL "
- "support in base driver for proper aggregator "
- "selection.\n", bond_dev->name);
+ pr_warning("%s: Warning: Operation of 802.3ad mode requires ETHTOOL support in base driver for proper aggregator selection.\n",
+ bond_dev->name);
}
}
@@ -1742,11 +1701,10 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
if (res)
goto err_close;
- pr_info(DRV_NAME
- ": %s: enslaving %s as a%s interface with a%s link.\n",
- bond_dev->name, slave_dev->name,
- new_slave->state == BOND_STATE_ACTIVE ? "n active" : " backup",
- new_slave->link != BOND_LINK_DOWN ? "n up" : " down");
+ pr_info("%s: enslaving %s as a%s interface with a%s link.\n",
+ bond_dev->name, slave_dev->name,
+ new_slave->state == BOND_STATE_ACTIVE ? "n active" : " backup",
+ new_slave->link != BOND_LINK_DOWN ? "n up" : " down");
/* enslave is successful */
return 0;
@@ -1798,8 +1756,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
/* slave is not a slave or master is not master of this slave */
if (!(slave_dev->flags & IFF_SLAVE) ||
(slave_dev->master != bond_dev)) {
- pr_err(DRV_NAME
- ": %s: Error: cannot release %s.\n",
+ pr_err("%s: Error: cannot release %s.\n",
bond_dev->name, slave_dev->name);
return -EINVAL;
}
@@ -1809,9 +1766,8 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
slave = bond_get_slave_by_dev(bond, slave_dev);
if (!slave) {
/* not a slave of this bond */
- pr_info(DRV_NAME
- ": %s: %s not enslaved\n",
- bond_dev->name, slave_dev->name);
+ pr_info("%s: %s not enslaved\n",
+ bond_dev->name, slave_dev->name);
write_unlock_bh(&bond->lock);
return -EINVAL;
}
@@ -1819,14 +1775,10 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
if (!bond->params.fail_over_mac) {
if (!compare_ether_addr(bond_dev->dev_addr, slave->perm_hwaddr)
&& bond->slave_cnt > 1)
- pr_warning(DRV_NAME
- ": %s: Warning: the permanent HWaddr of %s - "
- "%pM - is still in use by %s. "
- "Set the HWaddr of %s to a different address "
- "to avoid conflicts.\n",
- bond_dev->name, slave_dev->name,
- slave->perm_hwaddr,
- bond_dev->name, slave_dev->name);
+ pr_warning("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n",
+ bond_dev->name, slave_dev->name,
+ slave->perm_hwaddr,
+ bond_dev->name, slave_dev->name);
}
/* Inform AD package of unbinding of slave. */
@@ -1837,12 +1789,10 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
bond_3ad_unbind_slave(slave);
}
- pr_info(DRV_NAME
- ": %s: releasing %s interface %s\n",
- bond_dev->name,
- (slave->state == BOND_STATE_ACTIVE)
- ? "active" : "backup",
- slave_dev->name);
+ pr_info("%s: releasing %s interface %s\n",
+ bond_dev->name,
+ (slave->state == BOND_STATE_ACTIVE) ? "active" : "backup",
+ slave_dev->name);
oldcurrent = bond->curr_active_slave;
@@ -1899,21 +1849,15 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
if (list_empty(&bond->vlan_list)) {
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
} else {
- pr_warning(DRV_NAME
- ": %s: Warning: clearing HW address of %s while it "
- "still has VLANs.\n",
- bond_dev->name, bond_dev->name);
- pr_warning(DRV_NAME
- ": %s: When re-adding slaves, make sure the bond's "
- "HW address matches its VLANs'.\n",
- bond_dev->name);
+ pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
+ bond_dev->name, bond_dev->name);
+ pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
+ bond_dev->name);
}
} else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
!bond_has_challenged_slaves(bond)) {
- pr_info(DRV_NAME
- ": %s: last VLAN challenged slave %s "
- "left bond %s. VLAN blocking is removed\n",
- bond_dev->name, slave_dev->name, bond_dev->name);
+ pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n",
+ bond_dev->name, slave_dev->name, bond_dev->name);
bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
}
@@ -1995,8 +1939,8 @@ int bond_release_and_destroy(struct net_device *bond_dev,
ret = bond_release(bond_dev, slave_dev);
if ((ret == 0) && (bond->slave_cnt == 0)) {
- pr_info(DRV_NAME ": %s: destroying bond %s.\n",
- bond_dev->name, bond_dev->name);
+ pr_info("%s: destroying bond %s.\n",
+ bond_dev->name, bond_dev->name);
unregister_netdevice(bond_dev);
}
return ret;
@@ -2100,19 +2044,13 @@ static int bond_release_all(struct net_device *bond_dev)
if (list_empty(&bond->vlan_list))
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
else {
- pr_warning(DRV_NAME
- ": %s: Warning: clearing HW address of %s while it "
- "still has VLANs.\n",
- bond_dev->name, bond_dev->name);
- pr_warning(DRV_NAME
- ": %s: When re-adding slaves, make sure the bond's "
- "HW address matches its VLANs'.\n",
- bond_dev->name);
+ pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n",
+ bond_dev->name, bond_dev->name);
+ pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n",
+ bond_dev->name);
}
- pr_info(DRV_NAME
- ": %s: released all slaves\n",
- bond_dev->name);
+ pr_info("%s: released all slaves\n", bond_dev->name);
out:
write_unlock_bh(&bond->lock);
@@ -2238,16 +2176,14 @@ static int bond_miimon_inspect(struct bonding *bond)
slave->link = BOND_LINK_FAIL;
slave->delay = bond->params.downdelay;
if (slave->delay) {
- pr_info(DRV_NAME
- ": %s: link status down for %s"
- "interface %s, disabling it in %d ms.\n",
- bond->dev->name,
- (bond->params.mode ==
- BOND_MODE_ACTIVEBACKUP) ?
- ((slave->state == BOND_STATE_ACTIVE) ?
- "active " : "backup ") : "",
- slave->dev->name,
- bond->params.downdelay * bond->params.miimon);
+ pr_info("%s: link status down for %sinterface %s, disabling it in %d ms.\n",
+ bond->dev->name,
+ (bond->params.mode ==
+ BOND_MODE_ACTIVEBACKUP) ?
+ ((slave->state == BOND_STATE_ACTIVE) ?
+ "active " : "backup ") : "",
+ slave->dev->name,
+ bond->params.downdelay * bond->params.miimon);
}
/*FALLTHRU*/
case BOND_LINK_FAIL:
@@ -2257,13 +2193,11 @@ static int bond_miimon_inspect(struct bonding *bond)
*/
slave->link = BOND_LINK_UP;
slave->jiffies = jiffies;
- pr_info(DRV_NAME
- ": %s: link status up again after %d "
- "ms for interface %s.\n",
- bond->dev->name,
- (bond->params.downdelay - slave->delay) *
- bond->params.miimon,
- slave->dev->name);
+ pr_info("%s: link status up again after %d ms for interface %s.\n",
+ bond->dev->name,
+ (bond->params.downdelay - slave->delay) *
+ bond->params.miimon,
+ slave->dev->name);
continue;
}
@@ -2284,25 +2218,21 @@ static int bond_miimon_inspect(struct bonding *bond)
slave->delay = bond->params.updelay;
if (slave->delay) {
- pr_info(DRV_NAME
- ": %s: link status up for "
- "interface %s, enabling it in %d ms.\n",
- bond->dev->name, slave->dev->name,
- ignore_updelay ? 0 :
- bond->params.updelay *
- bond->params.miimon);
+ pr_info("%s: link status up for interface %s, enabling it in %d ms.\n",
+ bond->dev->name, slave->dev->name,
+ ignore_updelay ? 0 :
+ bond->params.updelay *
+ bond->params.miimon);
}
/*FALLTHRU*/
case BOND_LINK_BACK:
if (!link_state) {
slave->link = BOND_LINK_DOWN;
- pr_info(DRV_NAME
- ": %s: link status down again after %d "
- "ms for interface %s.\n",
- bond->dev->name,
- (bond->params.updelay - slave->delay) *
- bond->params.miimon,
- slave->dev->name);
+ pr_info("%s: link status down again after %d ms for interface %s.\n",
+ bond->dev->name,
+ (bond->params.updelay - slave->delay) *
+ bond->params.miimon,
+ slave->dev->name);
continue;
}
@@ -2350,10 +2280,8 @@ static void bond_miimon_commit(struct bonding *bond)
slave->state = BOND_STATE_BACKUP;
}
- pr_info(DRV_NAME
- ": %s: link status definitely "
- "up for interface %s.\n",
- bond->dev->name, slave->dev->name);
+ pr_info("%s: link status definitely up for interface %s.\n",
+ bond->dev->name, slave->dev->name);
/* notify ad that the link status has changed */
if (bond->params.mode == BOND_MODE_8023AD)
@@ -2379,10 +2307,8 @@ static void bond_miimon_commit(struct bonding *bond)
bond->params.mode == BOND_MODE_8023AD)
bond_set_slave_inactive_flags(slave);
- pr_info(DRV_NAME
- ": %s: link status definitely down for "
- "interface %s, disabling it\n",
- bond->dev->name, slave->dev->name);
+ pr_info("%s: link status definitely down for interface %s, disabling it\n",
+ bond->dev->name, slave->dev->name);
if (bond->params.mode == BOND_MODE_8023AD)
bond_3ad_handle_link_change(slave,
@@ -2398,8 +2324,7 @@ static void bond_miimon_commit(struct bonding *bond)
continue;
default:
- pr_err(DRV_NAME
- ": %s: invalid new link %d on slave %s\n",
+ pr_err("%s: invalid new link %d on slave %s\n",
bond->dev->name, slave->new_link,
slave->dev->name);
slave->new_link = BOND_LINK_NOCHANGE;
@@ -2518,19 +2443,19 @@ static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_
struct sk_buff *skb;
pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op,
- slave_dev->name, dest_ip, src_ip, vlan_id);
+ slave_dev->name, dest_ip, src_ip, vlan_id);
skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
NULL, slave_dev->dev_addr, NULL);
if (!skb) {
- pr_err(DRV_NAME ": ARP packet allocation failed\n");
+ pr_err("ARP packet allocation failed\n");
return;
}
if (vlan_id) {
skb = vlan_put_tag(skb, vlan_id);
if (!skb) {
- pr_err(DRV_NAME ": failed to insert VLAN tag\n");
+ pr_err("failed to insert VLAN tag\n");
return;
}
}
@@ -2570,9 +2495,8 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
rv = ip_route_output_key(&init_net, &rt, &fl);
if (rv) {
if (net_ratelimit()) {
- pr_warning(DRV_NAME
- ": %s: no route to arp_ip_target %pI4\n",
- bond->dev->name, &fl.fl4_dst);
+ pr_warning("%s: no route to arp_ip_target %pI4\n",
+ bond->dev->name, &fl.fl4_dst);
}
continue;
}
@@ -2607,10 +2531,9 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
}
if (net_ratelimit()) {
- pr_warning(DRV_NAME
- ": %s: no path to arp_ip_target %pI4 via rt.dev %s\n",
- bond->dev->name, &fl.fl4_dst,
- rt->u.dst.dev ? rt->u.dst.dev->name : "NULL");
+ pr_warning("%s: no path to arp_ip_target %pI4 via rt.dev %s\n",
+ bond->dev->name, &fl.fl4_dst,
+ rt->u.dst.dev ? rt->u.dst.dev->name : "NULL");
}
ip_rt_put(rt);
}
@@ -2628,8 +2551,8 @@ static void bond_send_gratuitous_arp(struct bonding *bond)
struct vlan_entry *vlan;
struct net_device *vlan_dev;
- pr_debug("bond_send_grat_arp: bond %s slave %s\n", bond->dev->name,
- slave ? slave->dev->name : "NULL");
+ pr_debug("bond_send_grat_arp: bond %s slave %s\n",
+ bond->dev->name, slave ? slave->dev->name : "NULL");
if (!slave || !bond->send_grat_arp ||
test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
@@ -2658,7 +2581,8 @@ static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32
for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip) %d\n",
- &sip, &tip, i, &targets[i], bond_has_this_ip(bond, tip));
+ &sip, &tip, i, &targets[i],
+ bond_has_this_ip(bond, tip));
if (sip == targets[i]) {
if (bond_has_this_ip(bond, tip))
slave->last_arp_rx = jiffies;
@@ -2685,8 +2609,8 @@ static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct pack
read_lock(&bond->lock);
pr_debug("bond_arp_rcv: bond %s skb->dev %s orig_dev %s\n",
- bond->dev->name, skb->dev ? skb->dev->name : "NULL",
- orig_dev ? orig_dev->name : "NULL");
+ bond->dev->name, skb->dev ? skb->dev->name : "NULL",
+ orig_dev ? orig_dev->name : "NULL");
slave = bond_get_slave_by_dev(bond, orig_dev);
if (!slave || !slave_do_arp_validate(bond, slave))
@@ -2711,9 +2635,9 @@ static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct pack
memcpy(&tip, arp_ptr, 4);
pr_debug("bond_arp_rcv: %s %s/%d av %d sv %d sip %pI4 tip %pI4\n",
- bond->dev->name, slave->dev->name, slave->state,
- bond->params.arp_validate, slave_do_arp_validate(bond, slave),
- &sip, &tip);
+ bond->dev->name, slave->dev->name, slave->state,
+ bond->params.arp_validate, slave_do_arp_validate(bond, slave),
+ &sip, &tip);
/*
* Backup slaves won't see the ARP reply, but do come through
@@ -2787,17 +2711,14 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
* is closed.
*/
if (!oldcurrent) {
- pr_info(DRV_NAME
- ": %s: link status definitely "
- "up for interface %s, ",
- bond->dev->name,
- slave->dev->name);
+ pr_info("%s: link status definitely up for interface %s, ",
+ bond->dev->name,
+ slave->dev->name);
do_failover = 1;
} else {
- pr_info(DRV_NAME
- ": %s: interface %s is now up\n",
- bond->dev->name,
- slave->dev->name);
+ pr_info("%s: interface %s is now up\n",
+ bond->dev->name,
+ slave->dev->name);
}
}
} else {
@@ -2816,10 +2737,9 @@ void bond_loadbalance_arp_mon(struct work_struct *work)
if (slave->link_failure_count < UINT_MAX)
slave->link_failure_count++;
- pr_info(DRV_NAME
- ": %s: interface %s is now down.\n",
- bond->dev->name,
- slave->dev->name);
+ pr_info("%s: interface %s is now down.\n",
+ bond->dev->name,
+ slave->dev->name);
if (slave == oldcurrent)
do_failover = 1;
@@ -2952,9 +2872,7 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
slave->link = BOND_LINK_UP;
bond->current_arp_slave = NULL;
- pr_info(DRV_NAME
- ": %s: link status definitely "
- "up for interface %s.\n",
+ pr_info("%s: link status definitely up for interface %s.\n",
bond->dev->name, slave->dev->name);
if (!bond->curr_active_slave ||
@@ -2972,9 +2890,7 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
slave->link = BOND_LINK_DOWN;
bond_set_slave_inactive_flags(slave);
- pr_info(DRV_NAME
- ": %s: link status definitely down for "
- "interface %s, disabling it\n",
+ pr_info("%s: link status definitely down for interface %s, disabling it\n",
bond->dev->name, slave->dev->name);
if (slave == bond->curr_active_slave) {
@@ -2985,8 +2901,7 @@ static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
continue;
default:
- pr_err(DRV_NAME
- ": %s: impossible: new_link %d on slave %s\n",
+ pr_err("%s: impossible: new_link %d on slave %s\n",
bond->dev->name, slave->new_link,
slave->dev->name);
continue;
@@ -3015,9 +2930,9 @@ static void bond_ab_arp_probe(struct bonding *bond)
read_lock(&bond->curr_slave_lock);
if (bond->current_arp_slave && bond->curr_active_slave)
- pr_info(DRV_NAME "PROBE: c_arp %s && cas %s BAD\n",
- bond->current_arp_slave->dev->name,
- bond->curr_active_slave->dev->name);
+ pr_info("PROBE: c_arp %s && cas %s BAD\n",
+ bond->current_arp_slave->dev->name,
+ bond->curr_active_slave->dev->name);
if (bond->curr_active_slave) {
bond_arp_send_all(bond, bond->curr_active_slave);
@@ -3065,9 +2980,8 @@ static void bond_ab_arp_probe(struct bonding *bond)
bond_set_slave_inactive_flags(slave);
- pr_info(DRV_NAME
- ": %s: backup interface %s is now down.\n",
- bond->dev->name, slave->dev->name);
+ pr_info("%s: backup interface %s is now down.\n",
+ bond->dev->name, slave->dev->name);
}
}
}
@@ -3343,9 +3257,8 @@ static int bond_create_proc_entry(struct bonding *bond)
S_IRUGO, bond_proc_dir,
&bond_info_fops, bond);
if (bond->proc_entry == NULL)
- pr_warning(DRV_NAME
- ": Warning: Cannot create /proc/net/%s/%s\n",
- DRV_NAME, bond_dev->name);
+ pr_warning("Warning: Cannot create /proc/net/%s/%s\n",
+ DRV_NAME, bond_dev->name);
else
memcpy(bond->proc_file_name, bond_dev->name, IFNAMSIZ);
}
@@ -3370,9 +3283,8 @@ static void bond_create_proc_dir(void)
if (!bond_proc_dir) {
bond_proc_dir = proc_mkdir(DRV_NAME, init_net.proc_net);
if (!bond_proc_dir)
- pr_warning(DRV_NAME
- ": Warning: cannot create /proc/net/%s\n",
- DRV_NAME);
+ pr_warning("Warning: cannot create /proc/net/%s\n",
+ DRV_NAME);
}
}
@@ -3530,8 +3442,8 @@ static int bond_netdev_event(struct notifier_block *this,
return NOTIFY_DONE;
pr_debug("event_dev: %s, event: %lx\n",
- (event_dev ? event_dev->name : "None"),
- event);
+ event_dev ? event_dev->name : "None",
+ event);
if (!(event_dev->priv_flags & IFF_BONDING))
return NOTIFY_DONE;
@@ -3871,8 +3783,7 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
struct mii_ioctl_data *mii = NULL;
int res = 0;
- pr_debug("bond_ioctl: master=%s, cmd=%d\n",
- bond_dev->name, cmd);
+ pr_debug("bond_ioctl: master=%s, cmd=%d\n", bond_dev->name, cmd);
switch (cmd) {
case SIOCGMIIPHY:
@@ -3941,12 +3852,12 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd
slave_dev = dev_get_by_name(&init_net, ifr->ifr_slave);
- pr_debug("slave_dev=%p: \n", slave_dev);
+ pr_debug("slave_dev=%p:\n", slave_dev);
if (!slave_dev)
res = -ENODEV;
else {
- pr_debug("slave_dev->name=%s: \n", slave_dev->name);
+ pr_debug("slave_dev->name=%s:\n", slave_dev->name);
switch (cmd) {
case BOND_ENSLAVE_OLD:
case SIOCBONDENSLAVE:
@@ -4055,7 +3966,7 @@ static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
int i;
pr_debug("bond=%p, name=%s, new_mtu=%d\n", bond,
- (bond_dev ? bond_dev->name : "None"), new_mtu);
+ (bond_dev ? bond_dev->name : "None"), new_mtu);
/* Can't hold bond->lock with bh disabled here since
* some base drivers panic. On the other hand we can't
@@ -4073,8 +3984,10 @@ static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
*/
bond_for_each_slave(bond, slave, i) {
- pr_debug("s %p s->p %p c_m %p\n", slave,
- slave->prev, slave->dev->netdev_ops->ndo_change_mtu);
+ pr_debug("s %p s->p %p c_m %p\n",
+ slave,
+ slave->prev,
+ slave->dev->netdev_ops->ndo_change_mtu);
res = dev_set_mtu(slave->dev, new_mtu);
@@ -4104,8 +4017,8 @@ unwind:
tmp_res = dev_set_mtu(slave->dev, bond_dev->mtu);
if (tmp_res) {
- pr_debug("unwind err %d dev %s\n", tmp_res,
- slave->dev->name);
+ pr_debug("unwind err %d dev %s\n",
+ tmp_res, slave->dev->name);
}
}
@@ -4131,7 +4044,8 @@ static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
return bond_alb_set_mac_address(bond_dev, addr);
- pr_debug("bond=%p, name=%s\n", bond, (bond_dev ? bond_dev->name : "None"));
+ pr_debug("bond=%p, name=%s\n",
+ bond, bond_dev ? bond_dev->name : "None");
/*
* If fail_over_mac is set to active, do nothing and return
@@ -4196,8 +4110,8 @@ unwind:
tmp_res = dev_set_mac_address(slave->dev, &tmp_sa);
if (tmp_res) {
- pr_debug("unwind err %d dev %s\n", tmp_res,
- slave->dev->name);
+ pr_debug("unwind err %d dev %s\n",
+ tmp_res, slave->dev->name);
}
}
@@ -4353,9 +4267,7 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
if (tx_dev) {
struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2) {
- pr_err(DRV_NAME
- ": %s: Error: bond_xmit_broadcast(): "
- "skb_clone() failed\n",
+ pr_err("%s: Error: bond_xmit_broadcast(): skb_clone() failed\n",
bond_dev->name);
continue;
}
@@ -4421,8 +4333,8 @@ static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev)
return bond_alb_xmit(skb, dev);
default:
/* Should never happen, mode already checked */
- pr_err(DRV_NAME ": %s: Error: Unknown bonding mode %d\n",
- dev->name, bond->params.mode);
+ pr_err("%s: Error: Unknown bonding mode %d\n",
+ dev->name, bond->params.mode);
WARN_ON_ONCE(1);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
@@ -4458,10 +4370,8 @@ void bond_set_mode_ops(struct bonding *bond, int mode)
break;
default:
/* Should never happen, mode already checked */
- pr_err(DRV_NAME
- ": %s: Error: Unknown bonding mode %d\n",
- bond_dev->name,
- mode);
+ pr_err("%s: Error: Unknown bonding mode %d\n",
+ bond_dev->name, mode);
break;
}
}
@@ -4654,8 +4564,7 @@ static int bond_check_params(struct bond_params *params)
if (mode) {
bond_mode = bond_parse_parm(mode, bond_mode_tbl);
if (bond_mode == -1) {
- pr_err(DRV_NAME
- ": Error: Invalid bonding mode \"%s\"\n",
+ pr_err("Error: Invalid bonding mode \"%s\"\n",
mode == NULL ? "NULL" : mode);
return -EINVAL;
}
@@ -4664,15 +4573,13 @@ static int bond_check_params(struct bond_params *params)
if (xmit_hash_policy) {
if ((bond_mode != BOND_MODE_XOR) &&
(bond_mode != BOND_MODE_8023AD)) {
- pr_info(DRV_NAME
- ": xor_mode param is irrelevant in mode %s\n",
- bond_mode_name(bond_mode));
+ pr_info("xor_mode param is irrelevant in mode %s\n",
+ bond_mode_name(bond_mode));
} else {
xmit_hashtype = bond_parse_parm(xmit_hash_policy,
xmit_hashtype_tbl);
if (xmit_hashtype == -1) {
- pr_err(DRV_NAME
- ": Error: Invalid xmit_hash_policy \"%s\"\n",
+ pr_err("Error: Invalid xmit_hash_policy \"%s\"\n",
xmit_hash_policy == NULL ? "NULL" :
xmit_hash_policy);
return -EINVAL;
@@ -4682,14 +4589,12 @@ static int bond_check_params(struct bond_params *params)
if (lacp_rate) {
if (bond_mode != BOND_MODE_8023AD) {
- pr_info(DRV_NAME
- ": lacp_rate param is irrelevant in mode %s\n",
- bond_mode_name(bond_mode));
+ pr_info("lacp_rate param is irrelevant in mode %s\n",
+ bond_mode_name(bond_mode));
} else {
lacp_fast = bond_parse_parm(lacp_rate, bond_lacp_tbl);
if (lacp_fast == -1) {
- pr_err(DRV_NAME
- ": Error: Invalid lacp rate \"%s\"\n",
+ pr_err("Error: Invalid lacp rate \"%s\"\n",
lacp_rate == NULL ? "NULL" : lacp_rate);
return -EINVAL;
}
@@ -4699,82 +4604,64 @@ static int bond_check_params(struct bond_params *params)
if (ad_select) {
params->ad_select = bond_parse_parm(ad_select, ad_select_tbl);
if (params->ad_select == -1) {
- pr_err(DRV_NAME
- ": Error: Invalid ad_select \"%s\"\n",
+ pr_err("Error: Invalid ad_select \"%s\"\n",
ad_select == NULL ? "NULL" : ad_select);
return -EINVAL;
}
if (bond_mode != BOND_MODE_8023AD) {
- pr_warning(DRV_NAME
- ": ad_select param only affects 802.3ad mode\n");
+ pr_warning("ad_select param only affects 802.3ad mode\n");
}
} else {
params->ad_select = BOND_AD_STABLE;
}
if (max_bonds < 0) {
- pr_warning(DRV_NAME
- ": Warning: max_bonds (%d) not in range %d-%d, so it "
- "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
- max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
+ pr_warning("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
+ max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
max_bonds = BOND_DEFAULT_MAX_BONDS;
}
if (miimon < 0) {
- pr_warning(DRV_NAME
- ": Warning: miimon module parameter (%d), "
- "not in range 0-%d, so it was reset to %d\n",
- miimon, INT_MAX, BOND_LINK_MON_INTERV);
+ pr_warning("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to %d\n",
+ miimon, INT_MAX, BOND_LINK_MON_INTERV);
miimon = BOND_LINK_MON_INTERV;
}
if (updelay < 0) {
- pr_warning(DRV_NAME
- ": Warning: updelay module parameter (%d), "
- "not in range 0-%d, so it was reset to 0\n",
- updelay, INT_MAX);
+ pr_warning("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
+ updelay, INT_MAX);
updelay = 0;
}
if (downdelay < 0) {
- pr_warning(DRV_NAME
- ": Warning: downdelay module parameter (%d), "
- "not in range 0-%d, so it was reset to 0\n",
- downdelay, INT_MAX);
+ pr_warning("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",
+ downdelay, INT_MAX);
downdelay = 0;
}
if ((use_carrier != 0) && (use_carrier != 1)) {
- pr_warning(DRV_NAME
- ": Warning: use_carrier module parameter (%d), "
- "not of valid value (0/1), so it was set to 1\n",
- use_carrier);
+ pr_warning("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n",
+ use_carrier);
use_carrier = 1;
}
if (num_grat_arp < 0 || num_grat_arp > 255) {
- pr_warning(DRV_NAME
- ": Warning: num_grat_arp (%d) not in range 0-255 so it "
- "was reset to 1 \n", num_grat_arp);
+ pr_warning("Warning: num_grat_arp (%d) not in range 0-255 so it was reset to 1 \n",
+ num_grat_arp);
num_grat_arp = 1;
}
if (num_unsol_na < 0 || num_unsol_na > 255) {
- pr_warning(DRV_NAME
- ": Warning: num_unsol_na (%d) not in range 0-255 so it "
- "was reset to 1 \n", num_unsol_na);
+ pr_warning("Warning: num_unsol_na (%d) not in range 0-255 so it was reset to 1 \n",
+ num_unsol_na);
num_unsol_na = 1;
}
/* reset values for 802.3ad */
if (bond_mode == BOND_MODE_8023AD) {
if (!miimon) {
- pr_warning(DRV_NAME
- ": Warning: miimon must be specified, "
- "otherwise bonding will not detect link "
- "failure, speed and duplex which are "
- "essential for 802.3ad operation\n");
+ pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");
pr_warning("Forcing miimon to 100msec\n");
miimon = 100;
}
@@ -4784,24 +4671,15 @@ static int bond_check_params(struct bond_params *params)
if ((bond_mode == BOND_MODE_TLB) ||
(bond_mode == BOND_MODE_ALB)) {
if (!miimon) {
- pr_warning(DRV_NAME
- ": Warning: miimon must be specified, "
- "otherwise bonding will not detect link "
- "failure and link speed which are essential "
- "for TLB/ALB load balancing\n");
+ pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure and link speed which are essential for TLB/ALB load balancing\n");
pr_warning("Forcing miimon to 100msec\n");
miimon = 100;
}
}
if (bond_mode == BOND_MODE_ALB) {
- pr_notice(DRV_NAME
- ": In ALB mode you might experience client "
- "disconnections upon reconnection of a link if the "
- "bonding module updelay parameter (%d msec) is "
- "incompatible with the forwarding delay time of the "
- "switch\n",
- updelay);
+ pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n",
+ updelay);
}
if (!miimon) {
@@ -4809,49 +4687,37 @@ static int bond_check_params(struct bond_params *params)
/* just warn the user the up/down delay will have
* no effect since miimon is zero...
*/
- pr_warning(DRV_NAME
- ": Warning: miimon module parameter not set "
- "and updelay (%d) or downdelay (%d) module "
- "parameter is set; updelay and downdelay have "
- "no effect unless miimon is set\n",
- updelay, downdelay);
+ pr_warning("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",
+ updelay, downdelay);
}
} else {
/* don't allow arp monitoring */
if (arp_interval) {
- pr_warning(DRV_NAME
- ": Warning: miimon (%d) and arp_interval (%d) "
- "can't be used simultaneously, disabling ARP "
- "monitoring\n",
- miimon, arp_interval);
+ pr_warning("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",
+ miimon, arp_interval);
arp_interval = 0;
}
if ((updelay % miimon) != 0) {
- pr_warning(DRV_NAME
- ": Warning: updelay (%d) is not a multiple "
- "of miimon (%d), updelay rounded to %d ms\n",
- updelay, miimon, (updelay / miimon) * miimon);
+ pr_warning("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
+ updelay, miimon,
+ (updelay / miimon) * miimon);
}
updelay /= miimon;
if ((downdelay % miimon) != 0) {
- pr_warning(DRV_NAME
- ": Warning: downdelay (%d) is not a multiple "
- "of miimon (%d), downdelay rounded to %d ms\n",
- downdelay, miimon,
- (downdelay / miimon) * miimon);
+ pr_warning("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",
+ downdelay, miimon,
+ (downdelay / miimon) * miimon);
}
downdelay /= miimon;
}
if (arp_interval < 0) {
- pr_warning(DRV_NAME
- ": Warning: arp_interval module parameter (%d) "
- ", not in range 0-%d, so it was reset to %d\n",
- arp_interval, INT_MAX, BOND_LINK_ARP_INTERV);
+ pr_warning("Warning: arp_interval module parameter (%d) , not in range 0-%d, so it was reset to %d\n",
+ arp_interval, INT_MAX, BOND_LINK_ARP_INTERV);
arp_interval = BOND_LINK_ARP_INTERV;
}
@@ -4861,10 +4727,8 @@ static int bond_check_params(struct bond_params *params)
/* not complete check, but should be good enough to
catch mistakes */
if (!isdigit(arp_ip_target[arp_ip_count][0])) {
- pr_warning(DRV_NAME
- ": Warning: bad arp_ip_target module parameter "
- "(%s), ARP monitoring will not be performed\n",
- arp_ip_target[arp_ip_count]);
+ pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
+ arp_ip_target[arp_ip_count]);
arp_interval = 0;
} else {
__be32 ip = in_aton(arp_ip_target[arp_ip_count]);
@@ -4874,31 +4738,25 @@ static int bond_check_params(struct bond_params *params)
if (arp_interval && !arp_ip_count) {
/* don't allow arping if no arp_ip_target given... */
- pr_warning(DRV_NAME
- ": Warning: arp_interval module parameter (%d) "
- "specified without providing an arp_ip_target "
- "parameter, arp_interval was reset to 0\n",
- arp_interval);
+ pr_warning("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",
+ arp_interval);
arp_interval = 0;
}
if (arp_validate) {
if (bond_mode != BOND_MODE_ACTIVEBACKUP) {
- pr_err(DRV_NAME
- ": arp_validate only supported in active-backup mode\n");
+ pr_err("arp_validate only supported in active-backup mode\n");
return -EINVAL;
}
if (!arp_interval) {
- pr_err(DRV_NAME
- ": arp_validate requires arp_interval\n");
+ pr_err("arp_validate requires arp_interval\n");
return -EINVAL;
}
arp_validate_value = bond_parse_parm(arp_validate,
arp_validate_tbl);
if (arp_validate_value == -1) {
- pr_err(DRV_NAME
- ": Error: invalid arp_validate \"%s\"\n",
+ pr_err("Error: invalid arp_validate \"%s\"\n",
arp_validate == NULL ? "NULL" : arp_validate);
return -EINVAL;
}
@@ -4906,17 +4764,14 @@ static int bond_check_params(struct bond_params *params)
arp_validate_value = 0;
if (miimon) {
- pr_info(DRV_NAME
- ": MII link monitoring set to %d ms\n",
- miimon);
+ pr_info("MII link monitoring set to %d ms\n", miimon);
} else if (arp_interval) {
int i;
- pr_info(DRV_NAME ": ARP monitoring set to %d ms,"
- " validate %s, with %d target(s):",
- arp_interval,
- arp_validate_tbl[arp_validate_value].modename,
- arp_ip_count);
+ pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):",
+ arp_interval,
+ arp_validate_tbl[arp_validate_value].modename,
+ arp_ip_count);
for (i = 0; i < arp_ip_count; i++)
pr_info(" %s", arp_ip_target[i]);
@@ -4927,21 +4782,15 @@ static int bond_check_params(struct bond_params *params)
/* miimon and arp_interval not set, we need one so things
* work as expected, see bonding.txt for details
*/
- pr_warning(DRV_NAME
- ": Warning: either miimon or arp_interval and "
- "arp_ip_target module parameters must be specified, "
- "otherwise bonding will not detect link failures! see "
- "bonding.txt for details.\n");
+ pr_warning("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.\n");
}
if (primary && !USES_PRIMARY(bond_mode)) {
/* currently, using a primary only makes sense
* in active backup, TLB or ALB modes
*/
- pr_warning(DRV_NAME
- ": Warning: %s primary device specified but has no "
- "effect in %s mode\n",
- primary, bond_mode_name(bond_mode));
+ pr_warning("Warning: %s primary device specified but has no effect in %s mode\n",
+ primary, bond_mode_name(bond_mode));
primary = NULL;
}
@@ -4949,16 +4798,13 @@ static int bond_check_params(struct bond_params *params)
fail_over_mac_value = bond_parse_parm(fail_over_mac,
fail_over_mac_tbl);
if (fail_over_mac_value == -1) {
- pr_err(DRV_NAME
- ": Error: invalid fail_over_mac \"%s\"\n",
+ pr_err("Error: invalid fail_over_mac \"%s\"\n",
arp_validate == NULL ? "NULL" : arp_validate);
return -EINVAL;
}
if (bond_mode != BOND_MODE_ACTIVEBACKUP)
- pr_warning(DRV_NAME
- ": Warning: fail_over_mac only affects "
- "active-backup mode.\n");
+ pr_warning("Warning: fail_over_mac only affects active-backup mode.\n");
} else {
fail_over_mac_value = BOND_FOM_NONE;
}
@@ -5043,8 +4889,7 @@ int bond_create(const char *name)
/* Check to see if the bond already exists. */
/* FIXME: pass netns from caller */
if (name && __dev_get_by_name(&init_net, name)) {
- pr_err(DRV_NAME ": cannot add bond %s; already exists\n",
- name);
+ pr_err("cannot add bond %s; already exists\n", name);
res = -EEXIST;
goto out_rtnl;
}
@@ -5052,8 +4897,7 @@ int bond_create(const char *name)
bond_dev = alloc_netdev(sizeof(struct bonding), name ? name : "",
bond_setup);
if (!bond_dev) {
- pr_err(DRV_NAME ": %s: eek! can't alloc netdev!\n",
- name);
+ pr_err("%s: eek! can't alloc netdev!\n", name);
res = -ENOMEM;
goto out_rtnl;
}
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index ff449de..f84c3d9 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -19,6 +19,9 @@
* file called LICENSE.
*
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
@@ -102,11 +105,10 @@ static ssize_t bonding_store_bonds(struct class *cls,
goto err_no_cmd;
if (command[0] == '+') {
- pr_info(DRV_NAME
- ": %s is being created...\n", ifname);
+ pr_info("%s is being created...\n", ifname);
rv = bond_create(ifname);
if (rv) {
- pr_info(DRV_NAME ": Bond creation failed.\n");
+ pr_info("Bond creation failed.\n");
res = rv;
}
} else if (command[0] == '-') {
@@ -115,12 +117,10 @@ static ssize_t bonding_store_bonds(struct class *cls,
rtnl_lock();
bond_dev = bond_get_by_name(ifname);
if (bond_dev) {
- pr_info(DRV_NAME ": %s is being deleted...\n",
- ifname);
+ pr_info("%s is being deleted...\n", ifname);
unregister_netdevice(bond_dev);
} else {
- pr_err(DRV_NAME ": unable to delete non-existent %s\n",
- ifname);
+ pr_err("unable to delete non-existent %s\n", ifname);
res = -ENODEV;
}
rtnl_unlock();
@@ -133,8 +133,7 @@ static ssize_t bonding_store_bonds(struct class *cls,
return res;
err_no_cmd:
- pr_err(DRV_NAME ": no command found in bonding_masters."
- " Use +ifname or -ifname.\n");
+ pr_err("no command found in bonding_masters. Use +ifname or -ifname.\n");
return -EPERM;
}
@@ -218,8 +217,8 @@ static ssize_t bonding_store_slaves(struct device *d,
/* Quick sanity check -- is the bond interface up? */
if (!(bond->dev->flags & IFF_UP)) {
- pr_warning(DRV_NAME ": %s: doing slave updates when "
- "interface is down.\n", bond->dev->name);
+ pr_warning("%s: doing slave updates when interface is down.\n",
+ bond->dev->name);
}
/* Note: We can't hold bond->lock here, as bond_create grabs it. */
@@ -241,17 +240,14 @@ static ssize_t bonding_store_slaves(struct device *d,
/* FIXME: get netns from sysfs object */
dev = __dev_get_by_name(&init_net, ifname);
if (!dev) {
- pr_info(DRV_NAME
- ": %s: Interface %s does not exist!\n",
- bond->dev->name, ifname);
+ pr_info("%s: Interface %s does not exist!\n",
+ bond->dev->name, ifname);
ret = -ENODEV;
goto out;
}
if (dev->flags & IFF_UP) {
- pr_err(DRV_NAME
- ": %s: Error: Unable to enslave %s "
- "because it is already up.\n",
+ pr_err("%s: Error: Unable to enslave %s because it is already up.\n",
bond->dev->name, dev->name);
ret = -EPERM;
goto out;
@@ -260,8 +256,7 @@ static ssize_t bonding_store_slaves(struct device *d,
read_lock(&bond->lock);
bond_for_each_slave(bond, slave, i)
if (slave->dev == dev) {
- pr_err(DRV_NAME
- ": %s: Interface %s is already enslaved!\n",
+ pr_err("%s: Interface %s is already enslaved!\n",
bond->dev->name, ifname);
ret = -EPERM;
read_unlock(&bond->lock);
@@ -269,8 +264,7 @@ static ssize_t bonding_store_slaves(struct device *d,
}
read_unlock(&bond->lock);
- pr_info(DRV_NAME ": %s: Adding slave %s.\n",
- bond->dev->name, ifname);
+ pr_info("%s: Adding slave %s.\n", bond->dev->name, ifname);
/* If this is the first slave, then we need to set
the master's hardware address to be the same as the
@@ -307,7 +301,7 @@ static ssize_t bonding_store_slaves(struct device *d,
break;
}
if (dev) {
- pr_info(DRV_NAME ": %s: Removing slave %s\n",
+ pr_info("%s: Removing slave %s\n",
bond->dev->name, dev->name);
res = bond_release(bond->dev, dev);
if (res) {
@@ -317,16 +311,16 @@ static ssize_t bonding_store_slaves(struct device *d,
/* set the slave MTU to the default */
dev_set_mtu(dev, original_mtu);
} else {
- pr_err(DRV_NAME ": unable to remove non-existent"
- " slave %s for bond %s.\n",
- ifname, bond->dev->name);
+ pr_err("unable to remove non-existent slave %s for bond %s.\n",
+ ifname, bond->dev->name);
ret = -ENODEV;
}
goto out;
}
err_no_cmd:
- pr_err(DRV_NAME ": no command found in slaves file for bond %s. Use +ifname or -ifname.\n", bond->dev->name);
+ pr_err("no command found in slaves file for bond %s. Use +ifname or -ifname.\n",
+ bond->dev->name);
ret = -EPERM;
out:
@@ -359,18 +353,16 @@ static ssize_t bonding_store_mode(struct device *d,
struct bonding *bond = to_bond(d);
if (bond->dev->flags & IFF_UP) {
- pr_err(DRV_NAME ": unable to update mode of %s"
- " because interface is up.\n", bond->dev->name);
+ pr_err("unable to update mode of %s because interface is up.\n",
+ bond->dev->name);
ret = -EPERM;
goto out;
}
new_value = bond_parse_parm(buf, bond_mode_tbl);
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid mode value %.*s.\n",
- bond->dev->name,
- (int)strlen(buf) - 1, buf);
+ pr_err("%s: Ignoring invalid mode value %.*s.\n",
+ bond->dev->name, (int)strlen(buf) - 1, buf);
ret = -EINVAL;
goto out;
} else {
@@ -382,8 +374,8 @@ static ssize_t bonding_store_mode(struct device *d,
bond->params.mode = new_value;
bond_set_mode_ops(bond, bond->params.mode);
- pr_info(DRV_NAME ": %s: setting mode to %s (%d).\n",
- bond->dev->name, bond_mode_tbl[new_value].modename,
+ pr_info("%s: setting mode to %s (%d).\n",
+ bond->dev->name, bond_mode_tbl[new_value].modename,
new_value);
}
out:
@@ -415,8 +407,7 @@ static ssize_t bonding_store_xmit_hash(struct device *d,
struct bonding *bond = to_bond(d);
if (bond->dev->flags & IFF_UP) {
- pr_err(DRV_NAME
- "%s: Interface is up. Unable to update xmit policy.\n",
+ pr_err("%s: Interface is up. Unable to update xmit policy.\n",
bond->dev->name);
ret = -EPERM;
goto out;
@@ -424,8 +415,7 @@ static ssize_t bonding_store_xmit_hash(struct device *d,
new_value = bond_parse_parm(buf, xmit_hashtype_tbl);
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid xmit hash policy value %.*s.\n",
+ pr_err("%s: Ignoring invalid xmit hash policy value %.*s.\n",
bond->dev->name,
(int)strlen(buf) - 1, buf);
ret = -EINVAL;
@@ -433,7 +423,7 @@ static ssize_t bonding_store_xmit_hash(struct device *d,
} else {
bond->params.xmit_policy = new_value;
bond_set_mode_ops(bond, bond->params.mode);
- pr_info(DRV_NAME ": %s: setting xmit hash policy to %s (%d).\n",
+ pr_info("%s: setting xmit hash policy to %s (%d).\n",
bond->dev->name,
xmit_hashtype_tbl[new_value].modename, new_value);
}
@@ -466,20 +456,18 @@ static ssize_t bonding_store_arp_validate(struct device *d,
new_value = bond_parse_parm(buf, arp_validate_tbl);
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid arp_validate value %s\n",
+ pr_err("%s: Ignoring invalid arp_validate value %s\n",
bond->dev->name, buf);
return -EINVAL;
}
if (new_value && (bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
- pr_err(DRV_NAME
- ": %s: arp_validate only supported in active-backup mode.\n",
+ pr_err("%s: arp_validate only supported in active-backup mode.\n",
bond->dev->name);
return -EINVAL;
}
- pr_info(DRV_NAME ": %s: setting arp_validate to %s (%d).\n",
- bond->dev->name, arp_validate_tbl[new_value].modename,
- new_value);
+ pr_info("%s: setting arp_validate to %s (%d).\n",
+ bond->dev->name, arp_validate_tbl[new_value].modename,
+ new_value);
if (!bond->params.arp_validate && new_value)
bond_register_arp(bond);
@@ -517,24 +505,22 @@ static ssize_t bonding_store_fail_over_mac(struct device *d,
struct bonding *bond = to_bond(d);
if (bond->slave_cnt != 0) {
- pr_err(DRV_NAME
- ": %s: Can't alter fail_over_mac with slaves in bond.\n",
+ pr_err("%s: Can't alter fail_over_mac with slaves in bond.\n",
bond->dev->name);
return -EPERM;
}
new_value = bond_parse_parm(buf, fail_over_mac_tbl);
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid fail_over_mac value %s.\n",
+ pr_err("%s: Ignoring invalid fail_over_mac value %s.\n",
bond->dev->name, buf);
return -EINVAL;
}
bond->params.fail_over_mac = new_value;
- pr_info(DRV_NAME ": %s: Setting fail_over_mac to %s (%d).\n",
- bond->dev->name, fail_over_mac_tbl[new_value].modename,
- new_value);
+ pr_info("%s: Setting fail_over_mac to %s (%d).\n",
+ bond->dev->name, fail_over_mac_tbl[new_value].modename,
+ new_value);
return count;
}
@@ -565,31 +551,26 @@ static ssize_t bonding_store_arp_interval(struct device *d,
struct bonding *bond = to_bond(d);
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no arp_interval value specified.\n",
+ pr_err("%s: no arp_interval value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
+ pr_err("%s: Invalid arp_interval value %d not in range 1-%d; rejected.\n",
bond->dev->name, new_value, INT_MAX);
ret = -EINVAL;
goto out;
}
- pr_info(DRV_NAME
- ": %s: Setting ARP monitoring interval to %d.\n",
- bond->dev->name, new_value);
+ pr_info("%s: Setting ARP monitoring interval to %d.\n",
+ bond->dev->name, new_value);
bond->params.arp_interval = new_value;
if (bond->params.arp_interval)
bond->dev->priv_flags |= IFF_MASTER_ARPMON;
if (bond->params.miimon) {
- pr_info(DRV_NAME
- ": %s: ARP monitoring cannot be used with MII monitoring. "
- "%s Disabling MII monitoring.\n",
- bond->dev->name, bond->dev->name);
+ pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n",
+ bond->dev->name, bond->dev->name);
bond->params.miimon = 0;
if (delayed_work_pending(&bond->mii_work)) {
cancel_delayed_work(&bond->mii_work);
@@ -597,10 +578,8 @@ static ssize_t bonding_store_arp_interval(struct device *d,
}
}
if (!bond->params.arp_targets[0]) {
- pr_info(DRV_NAME
- ": %s: ARP monitoring has been set up, "
- "but no ARP targets have been specified.\n",
- bond->dev->name);
+ pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n",
+ bond->dev->name);
}
if (bond->dev->flags & IFF_UP) {
/* If the interface is up, we may need to fire off
@@ -660,8 +639,7 @@ static ssize_t bonding_store_arp_targets(struct device *d,
/* look for adds */
if (buf[0] == '+') {
if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
- pr_err(DRV_NAME
- ": %s: invalid ARP target %pI4 specified for addition\n",
+ pr_err("%s: invalid ARP target %pI4 specified for addition\n",
bond->dev->name, &newtarget);
ret = -EINVAL;
goto out;
@@ -669,23 +647,20 @@ static ssize_t bonding_store_arp_targets(struct device *d,
/* look for an empty slot to put the target in, and check for dupes */
for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
if (targets[i] == newtarget) { /* duplicate */
- pr_err(DRV_NAME
- ": %s: ARP target %pI4 is already present\n",
+ pr_err("%s: ARP target %pI4 is already present\n",
bond->dev->name, &newtarget);
ret = -EINVAL;
goto out;
}
if (targets[i] == 0) {
- pr_info(DRV_NAME
- ": %s: adding ARP target %pI4.\n",
- bond->dev->name, &newtarget);
+ pr_info("%s: adding ARP target %pI4.\n",
+ bond->dev->name, &newtarget);
done = 1;
targets[i] = newtarget;
}
}
if (!done) {
- pr_err(DRV_NAME
- ": %s: ARP target table is full!\n",
+ pr_err("%s: ARP target table is full!\n",
bond->dev->name);
ret = -EINVAL;
goto out;
@@ -693,8 +668,7 @@ static ssize_t bonding_store_arp_targets(struct device *d,
} else if (buf[0] == '-') {
if ((newtarget == 0) || (newtarget == htonl(INADDR_BROADCAST))) {
- pr_err(DRV_NAME
- ": %s: invalid ARP target %pI4 specified for removal\n",
+ pr_err("%s: invalid ARP target %pI4 specified for removal\n",
bond->dev->name, &newtarget);
ret = -EINVAL;
goto out;
@@ -703,9 +677,8 @@ static ssize_t bonding_store_arp_targets(struct device *d,
for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
if (targets[i] == newtarget) {
int j;
- pr_info(DRV_NAME
- ": %s: removing ARP target %pI4.\n",
- bond->dev->name, &newtarget);
+ pr_info("%s: removing ARP target %pI4.\n",
+ bond->dev->name, &newtarget);
for (j = i; (j < (BOND_MAX_ARP_TARGETS-1)) && targets[j+1]; j++)
targets[j] = targets[j+1];
@@ -714,16 +687,14 @@ static ssize_t bonding_store_arp_targets(struct device *d,
}
}
if (!done) {
- pr_info(DRV_NAME
- ": %s: unable to remove nonexistent ARP target %pI4.\n",
- bond->dev->name, &newtarget);
+ pr_info("%s: unable to remove nonexistent ARP target %pI4.\n",
+ bond->dev->name, &newtarget);
ret = -EINVAL;
goto out;
}
} else {
- pr_err(DRV_NAME ": no command found in arp_ip_targets file"
- " for bond %s. Use +<addr> or -<addr>.\n",
- bond->dev->name);
+ pr_err("no command found in arp_ip_targets file for bond %s. Use +<addr> or -<addr>.\n",
+ bond->dev->name);
ret = -EPERM;
goto out;
}
@@ -755,41 +726,34 @@ static ssize_t bonding_store_downdelay(struct device *d,
struct bonding *bond = to_bond(d);
if (!(bond->params.miimon)) {
- pr_err(DRV_NAME
- ": %s: Unable to set down delay as MII monitoring is disabled\n",
+ pr_err("%s: Unable to set down delay as MII monitoring is disabled\n",
bond->dev->name);
ret = -EPERM;
goto out;
}
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no down delay value specified.\n",
- bond->dev->name);
+ pr_err("%s: no down delay value specified.\n", bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n",
+ pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
bond->dev->name, new_value, 1, INT_MAX);
ret = -EINVAL;
goto out;
} else {
if ((new_value % bond->params.miimon) != 0) {
- pr_warning(DRV_NAME
- ": %s: Warning: down delay (%d) is not a "
- "multiple of miimon (%d), delay rounded "
- "to %d ms\n",
+ pr_warning("%s: Warning: down delay (%d) is not a multiple of miimon (%d), delay rounded to %d ms\n",
bond->dev->name, new_value,
bond->params.miimon,
(new_value / bond->params.miimon) *
bond->params.miimon);
}
bond->params.downdelay = new_value / bond->params.miimon;
- pr_info(DRV_NAME ": %s: Setting down delay to %d.\n",
- bond->dev->name,
- bond->params.downdelay * bond->params.miimon);
+ pr_info("%s: Setting down delay to %d.\n",
+ bond->dev->name,
+ bond->params.downdelay * bond->params.miimon);
}
@@ -817,41 +781,35 @@ static ssize_t bonding_store_updelay(struct device *d,
struct bonding *bond = to_bond(d);
if (!(bond->params.miimon)) {
- pr_err(DRV_NAME
- ": %s: Unable to set up delay as MII monitoring is disabled\n",
+ pr_err("%s: Unable to set up delay as MII monitoring is disabled\n",
bond->dev->name);
ret = -EPERM;
goto out;
}
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no up delay value specified.\n",
+ pr_err("%s: no up delay value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Invalid down delay value %d not in range %d-%d; rejected.\n",
+ pr_err("%s: Invalid down delay value %d not in range %d-%d; rejected.\n",
bond->dev->name, new_value, 1, INT_MAX);
ret = -EINVAL;
goto out;
} else {
if ((new_value % bond->params.miimon) != 0) {
- pr_warning(DRV_NAME
- ": %s: Warning: up delay (%d) is not a "
- "multiple of miimon (%d), updelay rounded "
- "to %d ms\n",
+ pr_warning("%s: Warning: up delay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",
bond->dev->name, new_value,
bond->params.miimon,
(new_value / bond->params.miimon) *
bond->params.miimon);
}
bond->params.updelay = new_value / bond->params.miimon;
- pr_info(DRV_NAME ": %s: Setting up delay to %d.\n",
- bond->dev->name, bond->params.updelay * bond->params.miimon);
-
+ pr_info("%s: Setting up delay to %d.\n",
+ bond->dev->name,
+ bond->params.updelay * bond->params.miimon);
}
out:
@@ -883,16 +841,14 @@ static ssize_t bonding_store_lacp(struct device *d,
struct bonding *bond = to_bond(d);
if (bond->dev->flags & IFF_UP) {
- pr_err(DRV_NAME
- ": %s: Unable to update LACP rate because interface is up.\n",
+ pr_err("%s: Unable to update LACP rate because interface is up.\n",
bond->dev->name);
ret = -EPERM;
goto out;
}
if (bond->params.mode != BOND_MODE_8023AD) {
- pr_err(DRV_NAME
- ": %s: Unable to update LACP rate because bond is not in 802.3ad mode.\n",
+ pr_err("%s: Unable to update LACP rate because bond is not in 802.3ad mode.\n",
bond->dev->name);
ret = -EPERM;
goto out;
@@ -902,12 +858,11 @@ static ssize_t bonding_store_lacp(struct device *d,
if ((new_value == 1) || (new_value == 0)) {
bond->params.lacp_fast = new_value;
- pr_info(DRV_NAME ": %s: Setting LACP rate to %s (%d).\n",
+ pr_info("%s: Setting LACP rate to %s (%d).\n",
bond->dev->name, bond_lacp_tbl[new_value].modename,
new_value);
} else {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid LACP rate value %.*s.\n",
+ pr_err("%s: Ignoring invalid LACP rate value %.*s.\n",
bond->dev->name, (int)strlen(buf) - 1, buf);
ret = -EINVAL;
}
@@ -937,9 +892,8 @@ static ssize_t bonding_store_ad_select(struct device *d,
struct bonding *bond = to_bond(d);
if (bond->dev->flags & IFF_UP) {
- pr_err(DRV_NAME
- ": %s: Unable to update ad_select because interface "
- "is up.\n", bond->dev->name);
+ pr_err("%s: Unable to update ad_select because interface is up.\n",
+ bond->dev->name);
ret = -EPERM;
goto out;
}
@@ -948,13 +902,11 @@ static ssize_t bonding_store_ad_select(struct device *d,
if (new_value != -1) {
bond->params.ad_select = new_value;
- pr_info(DRV_NAME
- ": %s: Setting ad_select to %s (%d).\n",
- bond->dev->name, ad_select_tbl[new_value].modename,
- new_value);
+ pr_info("%s: Setting ad_select to %s (%d).\n",
+ bond->dev->name, ad_select_tbl[new_value].modename,
+ new_value);
} else {
- pr_err(DRV_NAME
- ": %s: Ignoring invalid ad_select value %.*s.\n",
+ pr_err("%s: Ignoring invalid ad_select value %.*s.\n",
bond->dev->name, (int)strlen(buf) - 1, buf);
ret = -EINVAL;
}
@@ -984,15 +936,13 @@ static ssize_t bonding_store_n_grat_arp(struct device *d,
struct bonding *bond = to_bond(d);
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no num_grat_arp value specified.\n",
+ pr_err("%s: no num_grat_arp value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0 || new_value > 255) {
- pr_err(DRV_NAME
- ": %s: Invalid num_grat_arp value %d not in range 0-255; rejected.\n",
+ pr_err("%s: Invalid num_grat_arp value %d not in range 0-255; rejected.\n",
bond->dev->name, new_value);
ret = -EINVAL;
goto out;
@@ -1025,16 +975,14 @@ static ssize_t bonding_store_n_unsol_na(struct device *d,
struct bonding *bond = to_bond(d);
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no num_unsol_na value specified.\n",
+ pr_err("%s: no num_unsol_na value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0 || new_value > 255) {
- pr_err(DRV_NAME
- ": %s: Invalid num_unsol_na value %d not in range 0-255; rejected.\n",
+ pr_err("%s: Invalid num_unsol_na value %d not in range 0-255; rejected.\n",
bond->dev->name, new_value);
ret = -EINVAL;
goto out;
@@ -1069,40 +1017,31 @@ static ssize_t bonding_store_miimon(struct device *d,
struct bonding *bond = to_bond(d);
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no miimon value specified.\n",
+ pr_err("%s: no miimon value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if (new_value < 0) {
- pr_err(DRV_NAME
- ": %s: Invalid miimon value %d not in range %d-%d; rejected.\n",
+ pr_err("%s: Invalid miimon value %d not in range %d-%d; rejected.\n",
bond->dev->name, new_value, 1, INT_MAX);
ret = -EINVAL;
goto out;
} else {
- pr_info(DRV_NAME
- ": %s: Setting MII monitoring interval to %d.\n",
- bond->dev->name, new_value);
+ pr_info("%s: Setting MII monitoring interval to %d.\n",
+ bond->dev->name, new_value);
bond->params.miimon = new_value;
if (bond->params.updelay)
- pr_info(DRV_NAME
- ": %s: Note: Updating updelay (to %d) "
- "since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.updelay * bond->params.miimon);
+ pr_info("%s: Note: Updating updelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.updelay * bond->params.miimon);
if (bond->params.downdelay)
- pr_info(DRV_NAME
- ": %s: Note: Updating downdelay (to %d) "
- "since it is a multiple of the miimon value.\n",
- bond->dev->name,
- bond->params.downdelay * bond->params.miimon);
+ pr_info("%s: Note: Updating downdelay (to %d) since it is a multiple of the miimon value.\n",
+ bond->dev->name,
+ bond->params.downdelay * bond->params.miimon);
if (bond->params.arp_interval) {
- pr_info(DRV_NAME
- ": %s: MII monitoring cannot be used with "
- "ARP monitoring. Disabling ARP monitoring...\n",
- bond->dev->name);
+ pr_info("%s: MII monitoring cannot be used with ARP monitoring. Disabling ARP monitoring...\n",
+ bond->dev->name);
bond->params.arp_interval = 0;
bond->dev->priv_flags &= ~IFF_MASTER_ARPMON;
if (bond->params.arp_validate) {
@@ -1170,17 +1109,15 @@ static ssize_t bonding_store_primary(struct device *d,
write_lock_bh(&bond->curr_slave_lock);
if (!USES_PRIMARY(bond->params.mode)) {
- pr_info(DRV_NAME
- ": %s: Unable to set primary slave; %s is in mode %d\n",
- bond->dev->name, bond->dev->name, bond->params.mode);
+ pr_info("%s: Unable to set primary slave; %s is in mode %d\n",
+ bond->dev->name, bond->dev->name, bond->params.mode);
} else {
bond_for_each_slave(bond, slave, i) {
if (strnicmp
(slave->dev->name, buf,
strlen(slave->dev->name)) == 0) {
- pr_info(DRV_NAME
- ": %s: Setting %s as primary slave.\n",
- bond->dev->name, slave->dev->name);
+ pr_info("%s: Setting %s as primary slave.\n",
+ bond->dev->name, slave->dev->name);
bond->primary_slave = slave;
strcpy(bond->params.primary, slave->dev->name);
bond_select_active_slave(bond);
@@ -1191,15 +1128,13 @@ static ssize_t bonding_store_primary(struct device *d,
/* if we got here, then we didn't match the name of any slave */
if (strlen(buf) == 0 || buf[0] == '\n') {
- pr_info(DRV_NAME
- ": %s: Setting primary slave to None.\n",
- bond->dev->name);
+ pr_info("%s: Setting primary slave to None.\n",
+ bond->dev->name);
bond->primary_slave = NULL;
bond_select_active_slave(bond);
} else {
- pr_info(DRV_NAME
- ": %s: Unable to set %.*s as primary slave as it is not a slave.\n",
- bond->dev->name, (int)strlen(buf) - 1, buf);
+ pr_info("%s: Unable to set %.*s as primary slave as it is not a slave.\n",
+ bond->dev->name, (int)strlen(buf) - 1, buf);
}
}
out:
@@ -1233,20 +1168,18 @@ static ssize_t bonding_store_carrier(struct device *d,
if (sscanf(buf, "%d", &new_value) != 1) {
- pr_err(DRV_NAME
- ": %s: no use_carrier value specified.\n",
+ pr_err("%s: no use_carrier value specified.\n",
bond->dev->name);
ret = -EINVAL;
goto out;
}
if ((new_value == 0) || (new_value == 1)) {
bond->params.use_carrier = new_value;
- pr_info(DRV_NAME ": %s: Setting use_carrier to %d.\n",
- bond->dev->name, new_value);
+ pr_info("%s: Setting use_carrier to %d.\n",
+ bond->dev->name, new_value);
} else {
- pr_info(DRV_NAME
- ": %s: Ignoring invalid use_carrier value %d.\n",
- bond->dev->name, new_value);
+ pr_info("%s: Ignoring invalid use_carrier value %d.\n",
+ bond->dev->name, new_value);
}
out:
return count;
@@ -1291,8 +1224,7 @@ static ssize_t bonding_store_active_slave(struct device *d,
write_lock_bh(&bond->curr_slave_lock);
if (!USES_PRIMARY(bond->params.mode))
- pr_info(DRV_NAME ": %s: Unable to change active slave;"
- " %s is in mode %d\n",
+ pr_info("%s: Unable to change active slave; %s is in mode %d\n",
bond->dev->name, bond->dev->name, bond->params.mode);
else {
bond_for_each_slave(bond, slave, i) {
@@ -1303,9 +1235,9 @@ static ssize_t bonding_store_active_slave(struct device *d,
new_active = slave;
if (new_active == old_active) {
/* do nothing */
- pr_info(DRV_NAME
- ": %s: %s is already the current active slave.\n",
- bond->dev->name, slave->dev->name);
+ pr_info("%s: %s is already the current active slave.\n",
+ bond->dev->name,
+ slave->dev->name);
goto out;
}
else {
@@ -1313,16 +1245,15 @@ static ssize_t bonding_store_active_slave(struct device *d,
(old_active) &&
(new_active->link == BOND_LINK_UP) &&
IS_UP(new_active->dev)) {
- pr_info(DRV_NAME
- ": %s: Setting %s as active slave.\n",
- bond->dev->name, slave->dev->name);
+ pr_info("%s: Setting %s as active slave.\n",
+ bond->dev->name,
+ slave->dev->name);
bond_change_active_slave(bond, new_active);
}
else {
- pr_info(DRV_NAME
- ": %s: Could not set %s as active slave; "
- "either %s is down or the link is down.\n",
- bond->dev->name, slave->dev->name,
+ pr_info("%s: Could not set %s as active slave; either %s is down or the link is down.\n",
+ bond->dev->name,
+ slave->dev->name,
slave->dev->name);
}
goto out;
@@ -1333,14 +1264,12 @@ static ssize_t bonding_store_active_slave(struct device *d,
/* if we got here, then we didn't match the name of any slave */
if (strlen(buf) == 0 || buf[0] == '\n') {
- pr_info(DRV_NAME
- ": %s: Setting active slave to None.\n",
+ pr_info("%s: Setting active slave to None.\n",
bond->dev->name);
bond->primary_slave = NULL;
bond_select_active_slave(bond);
} else {
- pr_info(DRV_NAME ": %s: Unable to set %.*s"
- " as active slave as it is not a slave.\n",
+ pr_info("%s: Unable to set %.*s as active slave as it is not a slave.\n",
bond->dev->name, (int)strlen(buf) - 1, buf);
}
}
@@ -1541,8 +1470,7 @@ int bond_create_sysfs(void)
/* Is someone being kinky and naming a device bonding_master? */
if (__dev_get_by_name(&init_net,
class_attr_bonding_masters.attr.name))
- pr_err("network device named %s already "
- "exists in sysfs",
+ pr_err("network device named %s already exists in sysfs",
class_attr_bonding_masters.attr.name);
ret = 0;
}
--
1.6.3.1.10.g659a0.dirty
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 20/21] drivers/net/tlan: use pr_<level> and add pr_fmt(fmt)
2009-10-05 0:53 [PATCH 00/21] pr_dbg, pr_fmt Joe Perches
2009-10-05 0:53 ` [PATCH 19/21] drivers/net/bonding/: : use pr_fmt Joe Perches
@ 2009-10-05 0:53 ` Joe Perches
2009-10-05 7:12 ` David Miller
2009-10-05 0:53 ` [PATCH 21/21] drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg( Joe Perches
2 siblings, 1 reply; 11+ messages in thread
From: Joe Perches @ 2009-10-05 0:53 UTC (permalink / raw)
To: linux-kernel; +Cc: Samuel Chessman, netdev
Added #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Converted printk(KERN_<level> to pr_<level>(
Removed "TLAN: " prefixes
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/tlan.c | 135 ++++++++++++++++++++++++++--------------------------
1 files changed, 68 insertions(+), 67 deletions(-)
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 3d31b47..9527a84 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -170,6 +170,8 @@
*
*******************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/ioport.h>
@@ -468,7 +470,7 @@ static int __init tlan_probe(void)
{
int rc = -ENODEV;
- printk(KERN_INFO "%s", tlan_banner);
+ pr_info("%s", tlan_banner);
TLAN_DBG(TLAN_DEBUG_PROBE, "Starting PCI Probe....\n");
@@ -477,16 +479,16 @@ static int __init tlan_probe(void)
rc = pci_register_driver(&tlan_driver);
if (rc != 0) {
- printk(KERN_ERR "TLAN: Could not register pci driver.\n");
+ pr_err("Could not register pci driver.\n");
goto err_out_pci_free;
}
TLAN_DBG(TLAN_DEBUG_PROBE, "Starting EISA Probe....\n");
TLan_EisaProbe();
- printk(KERN_INFO "TLAN: %d device%s installed, PCI: %d EISA: %d\n",
- TLanDevicesInstalled, TLanDevicesInstalled == 1 ? "" : "s",
- tlan_have_pci, tlan_have_eisa);
+ pr_info("%d device%s installed, PCI: %d EISA: %d\n",
+ TLanDevicesInstalled, TLanDevicesInstalled == 1 ? "" : "s",
+ tlan_have_pci, tlan_have_eisa);
if (TLanDevicesInstalled == 0) {
rc = -ENODEV;
@@ -545,7 +547,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
rc = pci_request_regions(pdev, TLanSignature);
if (rc) {
- printk(KERN_ERR "TLAN: Could not reserve IO regions\n");
+ pr_err("Could not reserve IO regions\n");
goto err_out;
}
}
@@ -553,7 +555,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
dev = alloc_etherdev(sizeof(TLanPrivateInfo));
if (dev == NULL) {
- printk(KERN_ERR "TLAN: Could not allocate memory for device.\n");
+ pr_err("Could not allocate memory for device.\n");
rc = -ENOMEM;
goto err_out_regions;
}
@@ -572,7 +574,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
- printk(KERN_ERR "TLAN: No suitable PCI mapping available.\n");
+ pr_err("No suitable PCI mapping available.\n");
goto err_out_free_dev;
}
@@ -585,7 +587,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
}
}
if (!pci_io_base) {
- printk(KERN_ERR "TLAN: No IO mappings available\n");
+ pr_err("No IO mappings available\n");
rc = -EIO;
goto err_out_free_dev;
}
@@ -641,13 +643,13 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
rc = TLan_Init(dev);
if (rc) {
- printk(KERN_ERR "TLAN: Could not set up device.\n");
+ pr_err("Could not set up device.\n");
goto err_out_free_dev;
}
rc = register_netdev(dev);
if (rc) {
- printk(KERN_ERR "TLAN: Could not register device.\n");
+ pr_err("Could not register device.\n");
goto err_out_uninit;
}
@@ -664,12 +666,12 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
tlan_have_eisa++;
}
- printk(KERN_INFO "TLAN: %s irq=%2d, io=%04x, %s, Rev. %d\n",
- dev->name,
- (int) dev->irq,
- (int) dev->base_addr,
- priv->adapter->deviceLabel,
- priv->adapterRev);
+ pr_info("%s irq=%2d, io=%04x, %s, Rev. %d\n",
+ dev->name,
+ (int)dev->irq,
+ (int)dev->base_addr,
+ priv->adapter->deviceLabel,
+ priv->adapterRev);
return 0;
err_out_uninit:
@@ -882,8 +884,8 @@ static int TLan_Init( struct net_device *dev )
priv->dmaSize = dma_size;
if ( priv->dmaStorage == NULL ) {
- printk(KERN_ERR "TLAN: Could not allocate lists and buffers for %s.\n",
- dev->name );
+ pr_err("Could not allocate lists and buffers for %s.\n",
+ dev->name);
return -ENOMEM;
}
memset( priv->dmaStorage, 0, dma_size );
@@ -898,9 +900,8 @@ static int TLan_Init( struct net_device *dev )
(u8) priv->adapter->addrOfs + i,
(u8 *) &dev->dev_addr[i] );
if ( err ) {
- printk(KERN_ERR "TLAN: %s: Error reading MAC from eeprom: %d\n",
- dev->name,
- err );
+ pr_err("%s: Error reading MAC from eeprom: %d\n",
+ dev->name, err);
}
dev->addr_len = 6;
@@ -944,8 +945,8 @@ static int TLan_Open( struct net_device *dev )
dev->name, dev );
if ( err ) {
- pr_err("TLAN: Cannot open %s because IRQ %d is already in use.\n",
- dev->name, dev->irq );
+ pr_err("Cannot open %s because IRQ %d is already in use.\n",
+ dev->name, dev->irq);
return err;
}
@@ -1433,7 +1434,7 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
}
if (!ack)
- printk(KERN_INFO "TLAN: Received interrupt for uncompleted TX frame.\n");
+ pr_info("Received interrupt for uncompleted TX frame.\n");
if ( eoc ) {
TLAN_DBG( TLAN_DEBUG_TX,
@@ -1583,7 +1584,7 @@ drop_and_reuse:
}
if (!ack)
- printk(KERN_INFO "TLAN: Received interrupt for uncompleted RX frame.\n");
+ pr_info("Received interrupt for uncompleted RX frame.\n");
if ( eoc ) {
@@ -1638,7 +1639,7 @@ drop_and_reuse:
static u32 TLan_HandleDummy( struct net_device *dev, u16 host_int )
{
- printk( "TLAN: Test interrupt on %s.\n", dev->name );
+ pr_info("Test interrupt on %s.\n", dev->name);
return 1;
} /* TLan_HandleDummy */
@@ -1730,7 +1731,7 @@ static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int )
if ( host_int & TLAN_HI_IV_MASK ) {
netif_stop_queue( dev );
error = inl( dev->base_addr + TLAN_CH_PARM );
- printk( "TLAN: %s: Adaptor Error = 0x%x\n", dev->name, error );
+ pr_info("%s: Adaptor Error = 0x%x\n", dev->name, error);
TLan_ReadAndClearStats( dev, TLAN_RECORD );
outl( TLAN_HC_AD_RST, dev->base_addr + TLAN_HOST_CMD );
@@ -1969,7 +1970,7 @@ static void TLan_ResetLists( struct net_device *dev )
list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
skb = netdev_alloc_skb(dev, TLAN_MAX_FRAME_SIZE + 7 );
if ( !skb ) {
- pr_err("TLAN: out of memory for received data.\n" );
+ pr_err("out of memory for received data.\n");
break;
}
@@ -2054,13 +2055,13 @@ static void TLan_PrintDio( u16 io_base )
u32 data0, data1;
int i;
- printk( "TLAN: Contents of internal registers for io base 0x%04hx.\n",
- io_base );
- printk( "TLAN: Off. +0 +4\n" );
+ pr_info("Contents of internal registers for io base 0x%04hx.\n",
+ io_base);
+ pr_info(" Off. +0 +4\n");
for ( i = 0; i < 0x4C; i+= 8 ) {
data0 = TLan_DioRead32( io_base, i );
data1 = TLan_DioRead32( io_base, i + 0x4 );
- printk( "TLAN: 0x%02x 0x%08x 0x%08x\n", i, data0, data1 );
+ pr_info(" 0x%02x 0x%08x 0x%08x\n", i, data0, data1);
}
} /* TLan_PrintDio */
@@ -2089,14 +2090,14 @@ static void TLan_PrintList( TLanList *list, char *type, int num)
{
int i;
- printk( "TLAN: %s List %d at %p\n", type, num, list );
- printk( "TLAN: Forward = 0x%08x\n", list->forward );
- printk( "TLAN: CSTAT = 0x%04hx\n", list->cStat );
- printk( "TLAN: Frame Size = 0x%04hx\n", list->frameSize );
+ pr_info("%s List %d at %p\n", type, num, list);
+ pr_info(" Forward = 0x%08x\n", list->forward);
+ pr_info(" CSTAT = 0x%04hx\n", list->cStat);
+ pr_info(" Frame Size = 0x%04hx\n", list->frameSize);
/* for ( i = 0; i < 10; i++ ) { */
for ( i = 0; i < 2; i++ ) {
- printk( "TLAN: Buffer[%d].count, addr = 0x%08x, 0x%08x\n",
- i, list->buffer[i].count, list->buffer[i].address );
+ pr_info(" Buffer[%d].count, addr = 0x%08x, 0x%08x\n",
+ i, list->buffer[i].count, list->buffer[i].address);
}
} /* TLan_PrintList */
@@ -2315,7 +2316,7 @@ TLan_FinishReset( struct net_device *dev )
if ( ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) ||
( priv->aui ) ) {
status = MII_GS_LINK;
- printk( "TLAN: %s: Link forced.\n", dev->name );
+ pr_info("%s: Link forced.\n", dev->name);
} else {
TLan_MiiReadReg( dev, phy, MII_GEN_STS, &status );
udelay( 1000 );
@@ -2327,7 +2328,7 @@ TLan_FinishReset( struct net_device *dev )
TLan_MiiReadReg( dev, phy, MII_AN_LPA, &partner );
TLan_MiiReadReg( dev, phy, TLAN_TLPHY_PAR, &tlphy_par );
- printk( "TLAN: %s: Link active with ", dev->name );
+ pr_info("%s: Link active with ", dev->name);
if (!(tlphy_par & TLAN_PHY_AN_EN_STAT)) {
printk( "forced 10%sMbps %s-Duplex\n",
tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
@@ -2336,7 +2337,7 @@ TLan_FinishReset( struct net_device *dev )
printk( "AutoNegotiation enabled, at 10%sMbps %s-Duplex\n",
tlphy_par & TLAN_PHY_SPEED_100 ? "" : "0",
tlphy_par & TLAN_PHY_DUPLEX_FULL ? "Full" : "Half");
- printk("TLAN: Partner capability: ");
+ printk("Partner capability: ");
for (i = 5; i <= 10; i++)
if (partner & (1<<i))
printk("%s",media[i-5]);
@@ -2351,7 +2352,7 @@ TLan_FinishReset( struct net_device *dev )
TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_LINK_BEAT );
#endif
} else if (status & MII_GS_LINK) {
- printk( "TLAN: %s: Link active\n", dev->name );
+ pr_info("%s: Link active\n", dev->name);
TLan_DioWrite8( dev->base_addr, TLAN_LED_REG, TLAN_LED_LINK );
}
}
@@ -2376,8 +2377,8 @@ TLan_FinishReset( struct net_device *dev )
outl( TLAN_HC_GO | TLAN_HC_RT, dev->base_addr + TLAN_HOST_CMD );
netif_carrier_on(dev);
} else {
- printk( "TLAN: %s: Link inactive, will retry in 10 secs...\n",
- dev->name );
+ pr_info("%s: Link inactive, will retry in 10 secs...\n",
+ dev->name);
TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET );
return;
}
@@ -2461,23 +2462,23 @@ static void TLan_PhyPrint( struct net_device *dev )
phy = priv->phy[priv->phyNum];
if ( priv->adapter->flags & TLAN_ADAPTER_UNMANAGED_PHY ) {
- printk( "TLAN: Device %s, Unmanaged PHY.\n", dev->name );
+ pr_info("Device %s, Unmanaged PHY.\n", dev->name);
} else if ( phy <= TLAN_PHY_MAX_ADDR ) {
- printk( "TLAN: Device %s, PHY 0x%02x.\n", dev->name, phy );
- printk( "TLAN: Off. +0 +1 +2 +3 \n" );
+ pr_info("Device %s, PHY 0x%02x.\n", dev->name, phy);
+ pr_info(" Off. +0 +1 +2 +3 \n");
for ( i = 0; i < 0x20; i+= 4 ) {
- printk( "TLAN: 0x%02x", i );
+ pr_info(" 0x%02x", i);
TLan_MiiReadReg( dev, phy, i, &data0 );
- printk( " 0x%04hx", data0 );
+ pr_cont(" 0x%04hx", data0);
TLan_MiiReadReg( dev, phy, i + 1, &data1 );
- printk( " 0x%04hx", data1 );
+ pr_cont(" 0x%04hx", data1);
TLan_MiiReadReg( dev, phy, i + 2, &data2 );
- printk( " 0x%04hx", data2 );
+ pr_cont(" 0x%04hx", data2);
TLan_MiiReadReg( dev, phy, i + 3, &data3 );
- printk( " 0x%04hx\n", data3 );
+ pr_cont(" 0x%04hx\n", data3);
}
} else {
- printk( "TLAN: Device %s, Invalid PHY.\n", dev->name );
+ pr_info("Device %s, Invalid PHY.\n", dev->name);
}
} /* TLan_PhyPrint */
@@ -2545,7 +2546,7 @@ static void TLan_PhyDetect( struct net_device *dev )
} else if ( priv->phy[0] != TLAN_PHY_NONE ) {
priv->phyNum = 0;
} else {
- printk( "TLAN: Cannot initialize device, no PHY was found!\n" );
+ pr_info("Cannot initialize device, no PHY was found!\n");
}
} /* TLan_PhyDetect */
@@ -2674,7 +2675,7 @@ static void TLan_PhyStartLink( struct net_device *dev )
* but the card need additional time to start AN.
* .5 sec should be plenty extra.
*/
- printk( "TLAN: %s: Starting autonegotiation.\n", dev->name );
+ pr_info("%s: Starting autonegotiation.\n", dev->name);
TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_PHY_FINISH_AN );
return;
}
@@ -2736,17 +2737,17 @@ static void TLan_PhyFinishAutoNeg( struct net_device *dev )
/* Wait for 8 sec to give the process
* more time. Perhaps we should fail after a while.
*/
- if (!priv->neg_be_verbose++) {
- pr_info("TLAN: Giving autonegotiation more time.\n");
- pr_info("TLAN: Please check that your adapter has\n");
- pr_info("TLAN: been properly connected to a HUB or Switch.\n");
- pr_info("TLAN: Trying to establish link in the background...\n");
- }
+ if (!priv->neg_be_verbose++) {
+ pr_info("Giving autonegotiation more time.\n");
+ pr_info("Please check that your adapter has\n");
+ pr_info("been properly connected to a HUB or Switch.\n");
+ pr_info("Trying to establish link in the background...\n");
+ }
TLan_SetTimer( dev, (8*HZ), TLAN_TIMER_PHY_FINISH_AN );
return;
}
- printk( "TLAN: %s: Autonegotiation complete.\n", dev->name );
+ pr_info("%s: Autonegotiation complete.\n", dev->name);
TLan_MiiReadReg( dev, phy, MII_AN_ADV, &an_adv );
TLan_MiiReadReg( dev, phy, MII_AN_LPA, &an_lpa );
mode = an_adv & an_lpa & 0x03E0;
@@ -2771,10 +2772,10 @@ static void TLan_PhyFinishAutoNeg( struct net_device *dev )
( an_adv & an_lpa & 0x0040 ) ) {
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL,
MII_GC_AUTOENB | MII_GC_DUPLEX );
- pr_info("TLAN: Starting internal PHY with FULL-DUPLEX\n" );
+ pr_info("Starting internal PHY with FULL-DUPLEX\n");
} else {
TLan_MiiWriteReg( dev, phy, MII_GEN_CTL, MII_GC_AUTOENB );
- pr_info( "TLAN: Starting internal PHY with HALF-DUPLEX\n" );
+ pr_info("Starting internal PHY with HALF-DUPLEX\n");
}
}
@@ -2819,7 +2820,7 @@ void TLan_PhyMonitor( struct net_device *dev )
if (!(phy_status & MII_GS_LINK)) {
if (priv->link) {
priv->link = 0;
- printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name);
+ pr_dbg("%s has lost link\n", dev->name);
netif_carrier_off(dev);
TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT );
return;
@@ -2829,7 +2830,7 @@ void TLan_PhyMonitor( struct net_device *dev )
/* Link restablished? */
if ((phy_status & MII_GS_LINK) && !priv->link) {
priv->link = 1;
- printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name);
+ pr_dbg("%s has reestablished link\n", dev->name);
netif_carrier_on(dev);
}
--
1.6.3.1.10.g659a0.dirty
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 21/21] drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg(
2009-10-05 0:53 [PATCH 00/21] pr_dbg, pr_fmt Joe Perches
2009-10-05 0:53 ` [PATCH 19/21] drivers/net/bonding/: : use pr_fmt Joe Perches
2009-10-05 0:53 ` [PATCH 20/21] drivers/net/tlan: use pr_<level> and add pr_fmt(fmt) Joe Perches
@ 2009-10-05 0:53 ` Joe Perches
2009-10-05 7:12 ` David Miller
2 siblings, 1 reply; 11+ messages in thread
From: Joe Perches @ 2009-10-05 0:53 UTC (permalink / raw)
To: linux-kernel; +Cc: Samuel Chessman, netdev
Removed "TLAN: " prefix from debug printks, it's added by pr_fmt
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/tlan.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/tlan.h b/drivers/net/tlan.h
index 4b82f28..c5a4ad5 100644
--- a/drivers/net/tlan.h
+++ b/drivers/net/tlan.h
@@ -44,7 +44,7 @@
#define TLAN_RECORD 1
#define TLAN_DBG(lvl, format, args...) \
- do { if (debug&lvl) printk(KERN_DEBUG "TLAN: " format, ##args ); } while(0)
+ do { if (debug & lvl) pr_dbg(format, ##args); } while (0)
#define TLAN_DEBUG_GNRL 0x0001
#define TLAN_DEBUG_TX 0x0002
--
1.6.3.1.10.g659a0.dirty
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 19/21] drivers/net/bonding/: : use pr_fmt
2009-10-05 0:53 ` [PATCH 19/21] drivers/net/bonding/: : use pr_fmt Joe Perches
@ 2009-10-05 7:12 ` David Miller
0 siblings, 0 replies; 11+ messages in thread
From: David Miller @ 2009-10-05 7:12 UTC (permalink / raw)
To: joe; +Cc: linux-kernel, fubar, bonding-devel, netdev
From: Joe Perches <joe@perches.com>
Date: Sun, 4 Oct 2009 17:53:46 -0700
> Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> Remove DRV_NAME from pr_<level>s
> Consolidate long format strings
> Remove some extra tab indents
> Remove some unnecessary ()s from pr_<level>s arguments
> Align pr_<level> arguments
>
> Signed-off-by: Joe Perches <joe@perches.com>
Applied to net-next-2.6
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 20/21] drivers/net/tlan: use pr_<level> and add pr_fmt(fmt)
2009-10-05 0:53 ` [PATCH 20/21] drivers/net/tlan: use pr_<level> and add pr_fmt(fmt) Joe Perches
@ 2009-10-05 7:12 ` David Miller
0 siblings, 0 replies; 11+ messages in thread
From: David Miller @ 2009-10-05 7:12 UTC (permalink / raw)
To: joe; +Cc: linux-kernel, chessman, netdev
From: Joe Perches <joe@perches.com>
Date: Sun, 4 Oct 2009 17:53:47 -0700
> Added #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> Converted printk(KERN_<level> to pr_<level>(
> Removed "TLAN: " prefixes
>
> Signed-off-by: Joe Perches <joe@perches.com>
Applied to net-next-2.6
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 21/21] drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg(
2009-10-05 0:53 ` [PATCH 21/21] drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg( Joe Perches
@ 2009-10-05 7:12 ` David Miller
2009-10-05 7:16 ` Joe Perches
0 siblings, 1 reply; 11+ messages in thread
From: David Miller @ 2009-10-05 7:12 UTC (permalink / raw)
To: joe; +Cc: linux-kernel, chessman, netdev
From: Joe Perches <joe@perches.com>
Date: Sun, 4 Oct 2009 17:53:48 -0700
> Removed "TLAN: " prefix from debug printks, it's added by pr_fmt
>
> Signed-off-by: Joe Perches <joe@perches.com>
Applied to net-next-2.6
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 21/21] drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg(
2009-10-05 7:12 ` David Miller
@ 2009-10-05 7:16 ` Joe Perches
2009-10-05 7:20 ` David Miller
2009-10-05 21:15 ` Rafael J. Wysocki
0 siblings, 2 replies; 11+ messages in thread
From: Joe Perches @ 2009-10-05 7:16 UTC (permalink / raw)
To: David Miller; +Cc: linux-kernel, chessman, netdev
On Mon, 2009-10-05 at 00:12 -0700, David Miller wrote:
> From: Joe Perches <joe@perches.com>
> Date: Sun, 4 Oct 2009 17:53:48 -0700
> > Removed "TLAN: " prefix from debug printks, it's added by pr_fmt
> > Signed-off-by: Joe Perches <joe@perches.com>
> Applied to net-next-2.6
Patches 20 and 21 depend on patch 1, which introduces pr_dbg
to kernel.h. Compile failure otherwise.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 21/21] drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg(
2009-10-05 7:16 ` Joe Perches
@ 2009-10-05 7:20 ` David Miller
2009-10-05 21:15 ` Rafael J. Wysocki
1 sibling, 0 replies; 11+ messages in thread
From: David Miller @ 2009-10-05 7:20 UTC (permalink / raw)
To: joe; +Cc: linux-kernel, chessman, netdev
From: Joe Perches <joe@perches.com>
Date: Mon, 05 Oct 2009 00:16:14 -0700
> On Mon, 2009-10-05 at 00:12 -0700, David Miller wrote:
>> From: Joe Perches <joe@perches.com>
>> Date: Sun, 4 Oct 2009 17:53:48 -0700
>> > Removed "TLAN: " prefix from debug printks, it's added by pr_fmt
>> > Signed-off-by: Joe Perches <joe@perches.com>
>> Applied to net-next-2.6
>
> Patches 20 and 21 depend on patch 1, which introduces pr_dbg
> to kernel.h. Compile failure otherwise.
Ok, I'll toss them then.
Someone else merge this stuff:
Acked-by: David S. Miller <davem@davemloft.net>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 21/21] drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg(
2009-10-05 7:16 ` Joe Perches
2009-10-05 7:20 ` David Miller
@ 2009-10-05 21:15 ` Rafael J. Wysocki
2009-10-05 21:28 ` Joe Perches
1 sibling, 1 reply; 11+ messages in thread
From: Rafael J. Wysocki @ 2009-10-05 21:15 UTC (permalink / raw)
To: Joe Perches; +Cc: David Miller, linux-kernel, chessman, netdev
On Monday 05 October 2009, Joe Perches wrote:
> On Mon, 2009-10-05 at 00:12 -0700, David Miller wrote:
> > From: Joe Perches <joe@perches.com>
> > Date: Sun, 4 Oct 2009 17:53:48 -0700
> > > Removed "TLAN: " prefix from debug printks, it's added by pr_fmt
> > > Signed-off-by: Joe Perches <joe@perches.com>
> > Applied to net-next-2.6
>
> Patches 20 and 21 depend on patch 1, which introduces pr_dbg
> to kernel.h. Compile failure otherwise.
Why don't you push the first patch first, then, and wait with the others until
it gets merged? This way individual subsystem maintainers will be able to
merge them cleanly.
Rafael
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 21/21] drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg(
2009-10-05 21:15 ` Rafael J. Wysocki
@ 2009-10-05 21:28 ` Joe Perches
0 siblings, 0 replies; 11+ messages in thread
From: Joe Perches @ 2009-10-05 21:28 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: David Miller, linux-kernel, chessman, netdev
On Mon, 2009-10-05 at 23:15 +0200, Rafael J. Wysocki wrote:
> Why don't you push the first patch first, then, and wait with the others until
> it gets merged? This way individual subsystem maintainers will be able to
> merge them cleanly.
Sometimes patch series get a bit more feedback than individual patches.
Original rfc suggestion: (1 comment)
http://lkml.org/lkml/2009/10/1/399
Patch removing pr_fmt from driver (acked by Jiri):
http://lkml.org/lkml/2009/10/1/418
cheers, Joe
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2009-10-05 21:28 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-05 0:53 [PATCH 00/21] pr_dbg, pr_fmt Joe Perches
2009-10-05 0:53 ` [PATCH 19/21] drivers/net/bonding/: : use pr_fmt Joe Perches
2009-10-05 7:12 ` David Miller
2009-10-05 0:53 ` [PATCH 20/21] drivers/net/tlan: use pr_<level> and add pr_fmt(fmt) Joe Perches
2009-10-05 7:12 ` David Miller
2009-10-05 0:53 ` [PATCH 21/21] drivers/net/tlan.h: Convert printk(KERN_DEBUG to pr_dbg( Joe Perches
2009-10-05 7:12 ` David Miller
2009-10-05 7:16 ` Joe Perches
2009-10-05 7:20 ` David Miller
2009-10-05 21:15 ` Rafael J. Wysocki
2009-10-05 21:28 ` Joe Perches
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).