From: Thomas Graf <tgraf@suug.ch>
To: davem@davemloft.net, jesse@nicira.com,
stephen@networkplumber.org, pshelar@nicira.com
Cc: netdev@vger.kernel.org, dev@openvswitch.org
Subject: [PATCH 0/6 net-next] VXLAN Group Policy Extension
Date: Wed, 7 Jan 2015 03:05:35 +0100 [thread overview]
Message-ID: <cover.1420594925.git.tgraf@suug.ch> (raw)
Implements supports for the Group Policy VXLAN extension [0] to provide
a lightweight and simple security label mechanism across network peers
based on VXLAN. The security context and associated metadata is mapped
to/from skb->mark. This allows further mapping to a SELinux context
using SECMARK, to implement ACLs directly with nftables, iptables, OVS,
tc, etc.
The extension is disabled by default and should be run on a distinct
port in mixed Linux VXLAN VTEP environments. Liberal VXLAN VTEPs
which ignore unknown reserved bits will be able to receive VXLAN-GBP
frames.
Simple usage example:
10.1.1.1:
# ip link add vxlan0 type vxlan id 10 remote 10.1.1.2 gbp
# iptables -I OUTPUT -m owner --uid-owner 101 -j MARK --set-mark 0x200
10.1.1.2:
# ip link add vxlan0 type vxlan id 10 remote 10.1.1.1 gbp
# iptables -I INPUT -m mark --mark 0x200 -j DROP
iproute2 [1] and OVS [2] support will be provided in separate patches.
[0] https://tools.ietf.org/html/draft-smith-vxlan-group-policy
[1] https://github.com/tgraf/iproute2/tree/vxlan-gbp
[2] https://github.com/tgraf/ovs/tree/vxlan-gbp
Thomas Graf (6):
vxlan: Allow for VXLAN extensions to be implemented
vxlan: Group Policy extension
vxlan: Only bind to sockets with correct extensions enabled
vxlan: Fail build if VXLAN header is misdefined
openvswitch: Rename GENEVE_TUN_OPTS() to TUN_METADATA_OPTS()
openvswitch: Support VXLAN Group Policy extension
drivers/net/vxlan.c | 221 +++++++++++++++++++++++++++------------
include/net/vxlan.h | 104 ++++++++++++++++--
include/uapi/linux/if_link.h | 8 ++
include/uapi/linux/openvswitch.h | 19 ++++
net/openvswitch/flow.c | 2 +-
net/openvswitch/flow.h | 14 +--
net/openvswitch/flow_netlink.c | 111 ++++++++++++--------
net/openvswitch/vport-vxlan.c | 89 +++++++++++++++-
8 files changed, 435 insertions(+), 133 deletions(-)
--
1.9.3
next reply other threads:[~2015-01-07 2:05 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-07 2:05 Thomas Graf [this message]
2015-01-07 2:05 ` [PATCH 1/6] vxlan: Allow for VXLAN extensions to be implemented Thomas Graf
2015-01-07 3:46 ` Tom Herbert
2015-01-07 10:27 ` Thomas Graf
2015-01-07 22:45 ` Jesse Gross
[not found] ` <CAEP_g=_Xr=6nVoeVT8dgRZoM0bNXDiiua5GrjweZ1GaT1ixhZg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-07 23:24 ` Thomas Graf
[not found] ` <20150107232412.GD21149-FZi0V3Vbi30CUdFEqe4BF2D2FQJk+8+b@public.gmane.org>
2015-01-08 0:02 ` Tom Herbert
2015-01-08 0:14 ` Thomas Graf
[not found] ` <20150108001401.GG21149-FZi0V3Vbi30CUdFEqe4BF2D2FQJk+8+b@public.gmane.org>
2015-01-08 0:23 ` Tom Herbert
2015-01-07 2:05 ` [PATCH 2/6] vxlan: Group Policy extension Thomas Graf
2015-01-07 16:05 ` Tom Herbert
[not found] ` <CA+mtBx_Jj-tUM1nbHd2fHb0-=QpK3tcQgA=smWmg=cB-fupdGg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-07 16:21 ` Thomas Graf
2015-01-07 16:56 ` Tom Herbert
[not found] ` <CA+mtBx_A_M3+irq7w4nNCyPZBgM7ja+wfJT4w4Q0Yo6GMGYVgA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-01-07 17:21 ` Thomas Graf
2015-01-07 2:05 ` [PATCH 3/6] vxlan: Only bind to sockets with correct extensions enabled Thomas Graf
2015-01-07 22:45 ` Jesse Gross
2015-01-07 22:52 ` Thomas Graf
2015-01-07 2:05 ` [PATCH 4/6] vxlan: Fail build if VXLAN header is misdefined Thomas Graf
2015-01-07 2:05 ` [PATCH 5/6] openvswitch: Rename GENEVE_TUN_OPTS() to TUN_METADATA_OPTS() Thomas Graf
2015-01-07 22:46 ` Jesse Gross
2015-01-07 22:55 ` Thomas Graf
2015-01-07 2:05 ` [PATCH 6/6] openvswitch: Support VXLAN Group Policy extension Thomas Graf
2015-01-07 22:46 ` Jesse Gross
2015-01-07 23:01 ` Thomas Graf
2015-01-08 1:18 ` Jesse Gross
2015-01-08 10:22 ` Thomas Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1420594925.git.tgraf@suug.ch \
--to=tgraf@suug.ch \
--cc=davem@davemloft.net \
--cc=dev@openvswitch.org \
--cc=jesse@nicira.com \
--cc=netdev@vger.kernel.org \
--cc=pshelar@nicira.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).