From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Kubecek Subject: [PATCH net 0/2] IPv6 ECMP route add/replace fixes Date: Wed, 13 May 2015 11:50:30 +0200 (CEST) Message-ID: Cc: Nicolas Dichtel , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Alexey Kuznetsov , James Morris , Hideaki YOSHIFUJI , Patrick McHardy To: "David S. Miller" Return-path: Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org (1) When adding a nexthop of a multipath route fails (e.g. because of a conflict with an existing route), we are supposed to delete nexthops already added. However, currently we try to also delete all nexthops we haven't even tried to add yet so that a "ip route add" command can actually remove pre-existing routes if it fails. (2) Attempt to replace a multipath route results in a broken siblings linked list. Following commands (like "ip route del") can then either follow a link into freed memory or end in an infinite loop (if the slab object has been reused). Michal Kubecek (2): ipv6: do not delete previously existing ECMP routes if add fails ipv6: fix ECMP route replacement net/ipv6/ip6_fib.c | 17 ++++++++++++++--- net/ipv6/route.c | 9 ++++++--- 2 files changed, 20 insertions(+), 6 deletions(-) -- 2.3.7