[PATCH net-next 00/13] mlxsw: Add resource scale tests

[PATCH net-next 00/13] mlxsw: Add resource scale tests

[Petr Machata]

There are a number of tests that check features of the Linux networking
stack. By running them on suitable interfaces, one can exercise the
mlxsw offloading code. However none of these tests attempts to push
mlxsw to the limits supported by the ASIC.

As an additional wrinkle, the "limits supported by the ASIC" themselves
may not be a set of fixed numbers, but rather depend on a profile that
determines how the ASIC resources are allocated for different purposes.

This patchset introduces several tests that verify capability of mlxsw
to offload amounts of routes, flower rules, and mirroring sessions that
match predicted ASIC capacity, at different configuration profiles.
Additionally they verify that amounts exceeding the predicted capacity
can *not* be offloaded.

These are not generic tests, but ones that are tailored for mlxsw
specifically. For that reason they are not added to net/forwarding
selftests subdirectory, but rather to a newly-added drivers/net/mlxsw.

Patches #1, #2 and #3 tweak the generic forwarding/lib.sh to support the
new additions.

In patches #4 and #5, new libraries for interfacing with devlink are
introduced, first a generic one, then a Spectrum-specific one.

In patch #6, a devlink resource test is introduced.

Patches #7 and #8, #9 and #10, and #11 and #12 introduce three scale
tests: router, flower and mirror-to-gretap. The first of each pair of
patches introduces a generic portion of the test (mlxsw-specific), the
second introduces a Spectrum-specific wrapper.

Patch #13 then introduces a scale test driver that runs (possibly a
subset of) the tests introduced by patches from previous paragraph.

Arkadi Sharshevsky (1):
  selftests: mlxsw: Add router test

Petr Machata (8):
  selftests: forwarding: lib: Add check_err_fail()
  selftests: forwarding: lib: Parameterize NUM_NETIFS in two functions
  selftests: forwarding: Add devlink_lib.sh
  selftests: mlxsw: Add devlink_lib_spectrum.sh
  selftests: mlxsw: Add tc flower scale test
  selftests: mlxsw: Add target for tc flower test on spectrum
  selftests: mlxsw: Add scale test for mirror-to-gretap
  selftests: mlxsw: Add target for mirror-to-gretap test on spectrum

Yuval Mintz (4):
  selftests: forwarding: Allow lib.sh sourcing from other directories
  selftests: mlxsw: Add devlink KVD resource test
  selftests: mlxsw: Add target for router test on spectrum
  selftests: mlxsw: Add scale test for resources

 MAINTAINERS                                        |   1 +
 .../drivers/net/mlxsw/mirror_gre_scale.sh          | 197 +++++++++++++++++++++
 .../selftests/drivers/net/mlxsw/router_scale.sh    | 167 +++++++++++++++++
 .../net/mlxsw/spectrum/devlink_lib_spectrum.sh     | 119 +++++++++++++
 .../net/mlxsw/spectrum/devlink_resources.sh        | 117 ++++++++++++
 .../drivers/net/mlxsw/spectrum/mirror_gre_scale.sh |  13 ++
 .../drivers/net/mlxsw/spectrum/resource_scale.sh   |  55 ++++++
 .../drivers/net/mlxsw/spectrum/router_scale.sh     |  18 ++
 .../drivers/net/mlxsw/spectrum/tc_flower_scale.sh  |  19 ++
 .../selftests/drivers/net/mlxsw/tc_flower_scale.sh | 134 ++++++++++++++
 .../selftests/net/forwarding/devlink_lib.sh        | 108 +++++++++++
 tools/testing/selftests/net/forwarding/lib.sh      |  30 +++-
 12 files changed, 974 insertions(+), 4 deletions(-)
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/router_scale.sh
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh
 create mode 100755 tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh
 create mode 100755 tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh
 create mode 100644 tools/testing/selftests/net/forwarding/devlink_lib.sh

-- 
2.4.11

[PATCH net-next 01/13] selftests: forwarding: Allow lib.sh sourcing from other directories

[Petr Machata]

From: Yuval Mintz <yuvalm@mellanox.com>

The devlink related scripts are mlxsw-specific. As a result, they'll
reside in a different directory - but would still need the common logic
implemented in lib.sh.
So as a preliminary step, allow lib.sh to be sourced from other
directories as well.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
 tools/testing/selftests/net/forwarding/lib.sh | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index d1f14f83979e..59272824ef37 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -14,8 +14,13 @@ PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no}
 NETIF_TYPE=${NETIF_TYPE:=veth}
 NETIF_CREATE=${NETIF_CREATE:=yes}
 
-if [[ -f forwarding.config ]]; then
-	source forwarding.config
+relative_path="${BASH_SOURCE%/*}"
+if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then
+	relative_path="."
+fi
+
+if [[ -f $relative_path/forwarding.config ]]; then
+	source "$relative_path/forwarding.config"
 fi
 
 ##############################################################################
-- 
2.4.11

[PATCH net-next 02/13] selftests: forwarding: lib: Add check_err_fail()

[Petr Machata]

In the scale testing scenarios, one usually has a condition that is
expected to either fail, or pass, depending on which side of the scale
is being tested.

To capture this logic, add a function check_err_fail(), which dispatches
either to check_err() or check_fail(), depending on the value of the
first argument, should_fail.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
---
 tools/testing/selftests/net/forwarding/lib.sh | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 59272824ef37..5f4b7ed2c65a 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -156,6 +156,19 @@ check_fail()
 	fi
 }
 
+check_err_fail()
+{
+	local should_fail=$1; shift
+	local err=$1; shift
+	local what=$1; shift
+
+	if ((should_fail)); then
+		check_fail $err "$what succeeded, but should have failed"
+	else
+		check_err $err "$what failed"
+	fi
+}
+
 log_test()
 {
 	local test_name=$1
-- 
2.4.11

[PATCH net-next 03/13] selftests: forwarding: lib: Parameterize NUM_NETIFS in two functions

[Petr Machata]

setup_wait() and tc_offload_check() both assume that all NUM_NETIFS
interfaces are relevant for a given test. However, the scale test script
acts as an umbrella for a number of sub-tests, some of which may not
require all the interfaces.

Thus it's suboptimal for tc_offload_check() to query all the interfaces.
In case of setup_wait() it's incorrect, because the sub-test in question
of course doesn't configure any interfaces beyond what it needs, and
setup_wait() then ends up waiting indefinitely for the extraneous
interfaces to come up.

For that reason, give setup_wait() and tc_offload_check() an optional
parameter with a number of interfaces to probe. Fall back to global
NUM_NETIFS if the parameter is not given.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
---
 tools/testing/selftests/net/forwarding/lib.sh | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 5f4b7ed2c65a..e073918bbe15 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -220,7 +220,9 @@ setup_wait_dev()
 
 setup_wait()
 {
-	for i in $(eval echo {1..$NUM_NETIFS}); do
+	local num_netifs=${1:-$NUM_NETIFS}
+
+	for ((i = 1; i <= num_netifs; ++i)); do
 		setup_wait_dev ${NETIFS[p$i]}
 	done
 
@@ -481,7 +483,9 @@ forwarding_restore()
 
 tc_offload_check()
 {
-	for i in $(eval echo {1..$NUM_NETIFS}); do
+	local num_netifs=${1:-$NUM_NETIFS}
+
+	for ((i = 1; i <= num_netifs; ++i)); do
 		ethtool -k ${NETIFS[p$i]} \
 			| grep "hw-tc-offload: on" &> /dev/null
 		if [[ $? -ne 0 ]]; then
-- 
2.4.11

[PATCH net-next 04/13] selftests: forwarding: Add devlink_lib.sh

[Petr Machata]

This helper library contains wrappers to devlink functionality agnostic
to the underlying device.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
[petrm@mellanox.com: Split this out from another patch.]
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
 .../selftests/net/forwarding/devlink_lib.sh        | 108 +++++++++++++++++++++
 1 file changed, 108 insertions(+)
 create mode 100644 tools/testing/selftests/net/forwarding/devlink_lib.sh

diff --git a/tools/testing/selftests/net/forwarding/devlink_lib.sh b/tools/testing/selftests/net/forwarding/devlink_lib.sh
new file mode 100644
index 000000000000..5ab1e5f43022
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/devlink_lib.sh
@@ -0,0 +1,108 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+##############################################################################
+# Source library
+
+relative_path="${BASH_SOURCE%/*}"
+if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then
+	relative_path="."
+fi
+
+source "$relative_path/lib.sh"
+
+##############################################################################
+# Defines
+
+DEVLINK_DEV=$(devlink port show | grep "${NETIFS[p1]}" | \
+	      grep -v "${NETIFS[p1]}[0-9]" | cut -d" " -f1 | \
+	      rev | cut -d"/" -f2- | rev)
+if [ -z "$DEVLINK_DEV" ]; then
+	echo "SKIP: ${NETIFS[p1]} has no devlink device registered for it"
+	exit 1
+fi
+if [[ "$(echo $DEVLINK_DEV | grep -c pci)" -eq 0 ]]; then
+	echo "SKIP: devlink device's bus is not PCI"
+	exit 1
+fi
+
+DEVLINK_VIDDID=$(lspci -s $(echo $DEVLINK_DEV | cut -d"/" -f2) \
+		 -n | cut -d" " -f3)
+
+##############################################################################
+# Sanity checks
+
+devlink -j resource show "$DEVLINK_DEV" &> /dev/null
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing devlink resource support"
+	exit 1
+fi
+
+##############################################################################
+# Devlink helpers
+
+devlink_resource_names_to_path()
+{
+	local resource
+	local path=""
+
+	for resource in "${@}"; do
+		if [ "$path" == "" ]; then
+			path="$resource"
+		else
+			path="${path}/$resource"
+		fi
+	done
+
+	echo "$path"
+}
+
+devlink_resource_get()
+{
+	local name=$1
+	local resource_name=.[][\"$DEVLINK_DEV\"]
+
+	resource_name="$resource_name | .[] | select (.name == \"$name\")"
+
+	shift
+	for resource in "${@}"; do
+		resource_name="${resource_name} | .[\"resources\"][] | \
+			       select (.name == \"$resource\")"
+	done
+
+	devlink -j resource show "$DEVLINK_DEV" | jq "$resource_name"
+}
+
+devlink_resource_size_get()
+{
+	local size=$(devlink_resource_get "$@" | jq '.["size_new"]')
+
+	if [ "$size" == "null" ]; then
+		devlink_resource_get "$@" | jq '.["size"]'
+	else
+		echo "$size"
+	fi
+}
+
+devlink_resource_size_set()
+{
+	local new_size=$1
+	local path
+
+	shift
+	path=$(devlink_resource_names_to_path "$@")
+	devlink resource set "$DEVLINK_DEV" path "$path" size "$new_size"
+	check_err $? "Failed setting path $path to size $size"
+}
+
+devlink_reload()
+{
+	local still_pending
+
+	devlink dev reload "$DEVLINK_DEV" &> /dev/null
+	check_err $? "Failed reload"
+
+	still_pending=$(devlink resource show "$DEVLINK_DEV" | \
+			grep -c "size_new")
+	check_err $still_pending "Failed reload - There are still unset sizes"
+}
-- 
2.4.11

[PATCH net-next 05/13] selftests: mlxsw: Add devlink_lib_spectrum.sh

[Petr Machata]

This library builds on top of devlink_lib.sh and contains functionality
specific to Spectrum ASICs, e.g., re-partitioning the various KVD
sub-parts.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
[petrm@mellanox.com: Split this out from another patch. Fix line length
in devlink_sp_read_kvd_defaults().]
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
 MAINTAINERS                                        |   1 +
 .../net/mlxsw/spectrum/devlink_lib_spectrum.sh     | 119 +++++++++++++++++++++
 2 files changed, 120 insertions(+)
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh

diff --git a/MAINTAINERS b/MAINTAINERS
index f3e766e504d8..f3dd6c4f61e1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9154,6 +9154,7 @@ S:	Supported
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlxsw/
+F:	tools/testing/selftests/drivers/net/mlxsw/
 
 MELLANOX FIRMWARE FLASH LIBRARY (mlxfw)
 M:	mlxsw@mellanox.com
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh
new file mode 100644
index 000000000000..73035e25085d
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh
@@ -0,0 +1,119 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+source "../../../../net/forwarding/devlink_lib.sh"
+
+if [ "$DEVLINK_VIDDID" != "15b3:cb84" ]; then
+	echo "SKIP: test is tailored for Mellanox Spectrum"
+	exit 1
+fi
+
+# Needed for returning to default
+declare -A KVD_DEFAULTS
+
+KVD_CHILDREN="linear hash_single hash_double"
+KVDL_CHILDREN="singles chunks large_chunks"
+
+devlink_sp_resource_minimize()
+{
+	local size
+	local i
+
+	for i in $KVD_CHILDREN; do
+		size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]')
+		devlink_resource_size_set "$size" kvd "$i"
+	done
+
+	for i in $KVDL_CHILDREN; do
+		size=$(devlink_resource_get kvd linear "$i" | \
+		       jq '.["size_min"]')
+		devlink_resource_size_set "$size" kvd linear "$i"
+	done
+}
+
+devlink_sp_size_kvd_to_default()
+{
+	local need_reload=0
+	local i
+
+	for i in $KVD_CHILDREN; do
+		local size=$(echo "${KVD_DEFAULTS[kvd_$i]}" | jq '.["size"]')
+		current_size=$(devlink_resource_size_get kvd "$i")
+
+		if [ "$size" -ne "$current_size" ]; then
+			devlink_resource_size_set "$size" kvd "$i"
+			need_reload=1
+		fi
+	done
+
+	for i in $KVDL_CHILDREN; do
+		local size=$(echo "${KVD_DEFAULTS[kvd_linear_$i]}" | \
+			     jq '.["size"]')
+		current_size=$(devlink_resource_size_get kvd linear "$i")
+
+		if [ "$size" -ne "$current_size" ]; then
+			devlink_resource_size_set "$size" kvd linear "$i"
+			need_reload=1
+		fi
+	done
+
+	if [ "$need_reload" -ne "0" ]; then
+		devlink_reload
+	fi
+}
+
+devlink_sp_read_kvd_defaults()
+{
+	local key
+	local i
+
+	KVD_DEFAULTS[kvd]=$(devlink_resource_get "kvd")
+	for i in $KVD_CHILDREN; do
+		key=kvd_$i
+		KVD_DEFAULTS[$key]=$(devlink_resource_get kvd "$i")
+	done
+
+	for i in $KVDL_CHILDREN; do
+		key=kvd_linear_$i
+		KVD_DEFAULTS[$key]=$(devlink_resource_get kvd linear "$i")
+	done
+}
+
+KVD_PROFILES="default scale ipv4_max"
+
+devlink_sp_resource_kvd_profile_set()
+{
+	local profile=$1
+
+	case "$profile" in
+	scale)
+		devlink_resource_size_set 64000 kvd linear
+		devlink_resource_size_set 15616 kvd linear singles
+		devlink_resource_size_set 32000 kvd linear chunks
+		devlink_resource_size_set 16384 kvd linear large_chunks
+		devlink_resource_size_set 128000 kvd hash_single
+		devlink_resource_size_set 48000 kvd hash_double
+		devlink_reload
+		;;
+	ipv4_max)
+		devlink_resource_size_set 64000 kvd linear
+		devlink_resource_size_set 15616 kvd linear singles
+		devlink_resource_size_set 32000 kvd linear chunks
+		devlink_resource_size_set 16384 kvd linear large_chunks
+		devlink_resource_size_set 144000 kvd hash_single
+		devlink_resource_size_set 32768 kvd hash_double
+		devlink_reload
+		;;
+	default)
+		devlink_resource_size_set 98304 kvd linear
+		devlink_resource_size_set 16384 kvd linear singles
+		devlink_resource_size_set 49152 kvd linear chunks
+		devlink_resource_size_set 32768 kvd linear large_chunks
+		devlink_resource_size_set 87040 kvd hash_single
+		devlink_resource_size_set 60416 kvd hash_double
+		devlink_reload
+		;;
+	*)
+		check_err 1 "Unknown profile $profile"
+	esac
+}
-- 
2.4.11

[PATCH net-next 06/13] selftests: mlxsw: Add devlink KVD resource test

[Petr Machata]

From: Yuval Mintz <yuvalm@mellanox.com>

Add a selftest that can be used to perform basic sanity of the devlink
resource API as well as test the behavior of KVD manipulation in the
driver.

This is the first case of a HW-only test - in order to test the devlink
resource a driver capable of exposing resources has to be provided
first.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
[petrm@mellanox.com: Extracted two patches out of this patch. Tweaked
commit message.]
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
 .../net/mlxsw/spectrum/devlink_resources.sh        | 117 +++++++++++++++++++++
 1 file changed, 117 insertions(+)
 create mode 100755 tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh

diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh
new file mode 100755
index 000000000000..b1fe960e398a
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh
@@ -0,0 +1,117 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NUM_NETIFS=1
+source devlink_lib_spectrum.sh
+
+setup_prepare()
+{
+	devlink_sp_read_kvd_defaults
+}
+
+cleanup()
+{
+	pre_cleanup
+	devlink_sp_size_kvd_to_default
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+profiles_test()
+{
+	local i
+
+	log_info "Running profile tests"
+
+	for i in $KVD_PROFILES; do
+		RET=0
+		devlink_sp_resource_kvd_profile_set $i
+		log_test "'$i' profile"
+	done
+
+	# Default is explicitly tested at end to ensure it's actually applied
+	RET=0
+	devlink_sp_resource_kvd_profile_set "default"
+	log_test "'default' profile"
+}
+
+resources_min_test()
+{
+	local size
+	local i
+	local j
+
+	log_info "Running KVD-minimum tests"
+
+	for i in $KVD_CHILDREN; do
+		RET=0
+		size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]')
+		devlink_resource_size_set "$size" kvd "$i"
+
+		# In case of linear, need to minimize sub-resources as well
+		if [[ "$i" == "linear" ]]; then
+			for j in $KVDL_CHILDREN; do
+				devlink_resource_size_set 0 kvd linear "$j"
+			done
+		fi
+
+		devlink_reload
+		devlink_sp_size_kvd_to_default
+		log_test "'$i' minimize [$size]"
+	done
+}
+
+resources_max_test()
+{
+	local min_size
+	local size
+	local i
+	local j
+
+	log_info "Running KVD-maximum tests"
+	for i in $KVD_CHILDREN; do
+		RET=0
+		devlink_sp_resource_minimize
+
+		# Calculate the maximum possible size for the given partition
+		size=$(devlink_resource_size_get kvd)
+		for j in $KVD_CHILDREN; do
+			if [ "$i" != "$j" ]; then
+				min_size=$(devlink_resource_get kvd "$j" | \
+					   jq '.["size_min"]')
+				size=$((size - min_size))
+			fi
+		done
+
+		# Test almost maximum size
+		devlink_resource_size_set "$((size - 128))" kvd "$i"
+		devlink_reload
+		log_test "'$i' almost maximize [$((size - 128))]"
+
+		# Test above maximum size
+		devlink resource set "$DEVLINK_DEV" \
+			path "kvd/$i" size $((size + 128)) &> /dev/null
+		check_fail $? "Set kvd/$i to size $((size + 128)) should fail"
+		log_test "'$i' Overflow rejection [$((size + 128))]"
+
+		# Test maximum size
+		if [ "$i" == "hash_single" ] || [ "$i" == "hash_double" ]; then
+			echo "SKIP: Observed problem with exact max $i"
+			continue
+		fi
+
+		devlink_resource_size_set "$size" kvd "$i"
+		devlink_reload
+		log_test "'$i' maximize [$size]"
+
+		devlink_sp_size_kvd_to_default
+	done
+}
+
+profiles_test
+resources_min_test
+resources_max_test
+
+exit "$RET"
-- 
2.4.11

[PATCH net-next 07/13] selftests: mlxsw: Add router test

[Petr Machata]

From: Arkadi Sharshevsky <arkadis@mellanox.com>

This test aims for both stand alone and internal usage by the resource
infra. The test receives the number routes to offload and checks:
- The routes were offloaded correctly
- Traffic for each route.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
 .../selftests/drivers/net/mlxsw/router_scale.sh    | 167 +++++++++++++++++++++
 1 file changed, 167 insertions(+)
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/router_scale.sh

diff --git a/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh
new file mode 100644
index 000000000000..d231649b4f01
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh
@@ -0,0 +1,167 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ROUTER_NUM_NETIFS=4
+
+router_h1_create()
+{
+	simple_if_init $h1 192.0.1.1/24
+	ip route add 193.0.0.0/8 via 192.0.1.2 dev $h1
+}
+
+router_h1_destroy()
+{
+	ip route del 193.0.0.0/8 via 192.0.1.2 dev $h1
+	simple_if_fini $h1 192.0.1.1/24
+}
+
+router_h2_create()
+{
+	simple_if_init $h2 192.0.2.1/24
+	tc qdisc add dev $h2 handle ffff: ingress
+}
+
+router_h2_destroy()
+{
+	tc qdisc del dev $h2 handle ffff: ingress
+	simple_if_fini $h2 192.0.2.1/24
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+
+	ip address add 192.0.1.2/24 dev $rp1
+	ip address add 192.0.2.2/24 dev $rp2
+}
+
+router_destroy()
+{
+	ip address del 192.0.2.2/24 dev $rp2
+	ip address del 192.0.1.2/24 dev $rp1
+
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+router_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h1mac=$(mac_get $h1)
+	rp1mac=$(mac_get $rp1)
+
+	vrf_prepare
+
+	router_h1_create
+	router_h2_create
+
+	router_create
+}
+
+router_offload_validate()
+{
+	local route_count=$1
+	local offloaded_count
+
+	offloaded_count=$(ip route | grep -o 'offload' | wc -l)
+	[[ $offloaded_count -ge $route_count ]]
+}
+
+router_routes_create()
+{
+	local route_count=$1
+	local count=0
+
+	ROUTE_FILE="$(mktemp)"
+
+	for i in {0..255}
+	do
+		for j in {0..255}
+		do
+			for k in {0..255}
+			do
+				if [[ $count -eq $route_count ]]; then
+					break 3
+				fi
+
+				echo route add 193.${i}.${j}.${k}/32 via \
+				       192.0.2.1 dev $rp2  >> $ROUTE_FILE
+				((count++))
+			done
+		done
+	done
+
+	ip -b $ROUTE_FILE &> /dev/null
+}
+
+router_routes_destroy()
+{
+	if [[ -v ROUTE_FILE ]]; then
+		rm -f $ROUTE_FILE
+	fi
+}
+
+router_test()
+{
+	local route_count=$1
+	local should_fail=$2
+	local count=0
+
+	RET=0
+
+	router_routes_create $route_count
+
+	router_offload_validate $route_count
+	check_err_fail $should_fail $? "Offload of $route_count routes"
+	if [[ $RET -ne 0 ]] || [[ $should_fail -eq 1 ]]; then
+		return
+	fi
+
+	tc filter add dev $h2 ingress protocol ip pref 1 flower \
+		skip_sw dst_ip 193.0.0.0/8 action drop
+
+	for i in {0..255}
+	do
+		for j in {0..255}
+		do
+			for k in {0..255}
+			do
+				if [[ $count -eq $route_count ]]; then
+					break 3
+				fi
+
+				$MZ $h1 -c 1 -p 64 -a $h1mac -b $rp1mac \
+					-A 192.0.1.1 -B 193.${i}.${j}.${k} \
+					-t ip -q
+				((count++))
+			done
+		done
+	done
+
+	tc_check_packets "dev $h2 ingress" 1 $route_count
+	check_err $? "Offload mismatch"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 flower \
+		skip_sw dst_ip 193.0.0.0/8 action drop
+
+	router_routes_destroy
+}
+
+router_cleanup()
+{
+	pre_cleanup
+
+	router_routes_destroy
+	router_destroy
+
+	router_h2_destroy
+	router_h1_destroy
+
+	vrf_cleanup
+}
-- 
2.4.11

[PATCH net-next 08/13] selftests: mlxsw: Add target for router test on spectrum

[Petr Machata]

From: Yuval Mintz <yuvalm@mellanox.com>

IPv4 routes in Spectrum are based on the kvd single-hash, but as it's
a hash we need to assume we cannot reach 100% of its capacity.

Add a wrapper that provides us with good/bad target numbers for the
Spectrum ASIC.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
[petrm@mellanox.com: Drop shebang.]
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
 .../drivers/net/mlxsw/spectrum/router_scale.sh         | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh

diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh
new file mode 100644
index 000000000000..21c4697d5bab
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../router_scale.sh
+
+router_get_target()
+{
+	local should_fail=$1
+	local target
+
+	target=$(devlink_resource_size_get kvd hash_single)
+
+	if [[ $should_fail -eq 0 ]]; then
+		target=$((target * 85 / 100))
+	else
+		target=$((target + 1))
+	fi
+
+	echo $target
+}
-- 
2.4.11

[PATCH net-next 09/13] selftests: mlxsw: Add tc flower scale test

[Petr Machata]

Add test of capacity to offload flower.

This is a generic portion of the test that is meant to be called from a
driver that supplies a particular number of rules to be tested with.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
---
 .../selftests/drivers/net/mlxsw/tc_flower_scale.sh | 134 +++++++++++++++++++++
 1 file changed, 134 insertions(+)
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh

diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh
new file mode 100644
index 000000000000..a6d733d2a4b4
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh
@@ -0,0 +1,134 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for resource limit of offloaded flower rules. The test adds a given
+# number of flower matches for different IPv6 addresses, then generates traffic,
+# and ensures each was hit exactly once. This file contains functions to set up
+# a testing topology and run the test, and is meant to be sourced from a test
+# script that calls the testing routine with a given number of rules.
+
+TC_FLOWER_NUM_NETIFS=2
+
+tc_flower_h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+}
+
+tc_flower_h1_destroy()
+{
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+tc_flower_h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+}
+
+tc_flower_h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+tc_flower_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	vrf_prepare
+
+	tc_flower_h1_create
+	tc_flower_h2_create
+}
+
+tc_flower_cleanup()
+{
+	pre_cleanup
+
+	tc_flower_h2_destroy
+	tc_flower_h1_destroy
+
+	vrf_cleanup
+
+	if [[ -v TC_FLOWER_BATCH_FILE ]]; then
+		rm -f $TC_FLOWER_BATCH_FILE
+	fi
+}
+
+tc_flower_addr()
+{
+	local num=$1; shift
+
+	printf "2001:db8:1::%x" $num
+}
+
+tc_flower_rules_create()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	TC_FLOWER_BATCH_FILE="$(mktemp)"
+
+	for ((i = 0; i < count; ++i)); do
+		cat >> $TC_FLOWER_BATCH_FILE <<-EOF
+			filter add dev $h2 ingress \
+				prot ipv6 \
+				pref 1000 \
+				flower $tcflags dst_ip $(tc_flower_addr $i) \
+				action drop
+		EOF
+	done
+
+	tc -b $TC_FLOWER_BATCH_FILE
+	check_err_fail $should_fail $? "Rule insertion"
+}
+
+__tc_flower_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+	local last=$((count - 1))
+
+	tc_flower_rules_create $count $should_fail
+
+	for ((i = 0; i < count; ++i)); do
+		$MZ $h1 -q -c 1 -t ip -p 20 -b bc -6 \
+			-A 2001:db8:2::1 \
+			-B $(tc_flower_addr $i)
+	done
+
+	MISMATCHES=$(
+		tc -j -s filter show dev $h2 ingress |
+		jq -r '[ .[] | select(.kind == "flower") | .options |
+		         values as $rule | .actions[].stats.packets |
+		         select(. != 1) | "\(.) on \($rule.keys.dst_ip)" ] |
+		       join(", ")'
+	)
+
+	test -z "$MISMATCHES"
+	check_err $? "Expected to capture 1 packet for each IP, but got $MISMATCHES"
+}
+
+tc_flower_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	# We use lower 16 bits of IPv6 address for match. Also there are only 16
+	# bits of rule priority space.
+	if ((count > 65536)); then
+		check_err 1 "Invalid count of $count. At most 65536 rules supported"
+		return
+	fi
+
+	if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then
+		check_err 1 "Could not test offloaded functionality"
+		return
+	fi
+
+	tcflags="skip_sw"
+	__tc_flower_test $count $should_fail
+}
-- 
2.4.11

[PATCH net-next 10/13] selftests: mlxsw: Add target for tc flower test on spectrum

[Petr Machata]

Add a wrapper around mlxsw/tc_flower_scale.sh that parameterizes the
generic tc flower scale test template with Spectrum-specific target
values.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
---
 .../drivers/net/mlxsw/spectrum/tc_flower_scale.sh     | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh

diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh
new file mode 100644
index 000000000000..f9bfd8937765
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../tc_flower_scale.sh
+
+tc_flower_get_target()
+{
+	local should_fail=$1; shift
+
+	# 6144 (6x1024) is the theoretical maximum.
+	# One bank of 512 rules is taken by the 18-byte MC router rule.
+	# One rule is the ACL catch-all.
+	# 6144 - 512 - 1 = 5631
+	local target=5631
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}
-- 
2.4.11

[PATCH net-next 11/13] selftests: mlxsw: Add scale test for mirror-to-gretap

[Petr Machata]

Test that it's possible to offload a given number of mirrors.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
---
 .../drivers/net/mlxsw/mirror_gre_scale.sh          | 197 +++++++++++++++++++++
 1 file changed, 197 insertions(+)
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh

diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh
new file mode 100644
index 000000000000..6f3a70df63bc
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Test offloading a number of mirrors-to-gretap. The test creates a number of
+# tunnels. Then it adds one flower mirror for each of the tunnels, matching a
+# given host IP. Then it generates traffic at each of the host IPs and checks
+# that the traffic has been mirrored at the appropriate tunnel.
+#
+#   +--------------------------+                   +--------------------------+
+#   | H1                       |                   |                       H2 |
+#   |     + $h1                |                   |                $h2 +     |
+#   |     | 2001:db8:1:X::1/64 |                   | 2001:db8:1:X::2/64 |     |
+#   +-----|--------------------+                   +--------------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirrors                                                  |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   |     + $swp3                          + gt6-<X> (ip6gretap)              |
+#   |     | 2001:db8:2:X::1/64             : loc=2001:db8:2:X::1              |
+#   |     |                                : rem=2001:db8:2:X::2              |
+#   |     |                                : ttl=100                          |
+#   |     |                                : tos=inherit                      |
+#   |     |                                :                                  |
+#   +-----|--------------------------------:----------------------------------+
+#         |                                :
+#   +-----|--------------------------------:----------------------------------+
+#   | H3  + $h3                            + h3-gt6-<X> (ip6gretap)           |
+#   |       2001:db8:2:X::2/64               loc=2001:db8:2:X::2              |
+#   |                                        rem=2001:db8:2:X::1              |
+#   |                                        ttl=100                          |
+#   |                                        tos=inherit                      |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+
+source ../../../../net/forwarding/mirror_lib.sh
+
+MIRROR_NUM_NETIFS=6
+
+mirror_gre_ipv6_addr()
+{
+	local net=$1; shift
+	local num=$1; shift
+
+	printf "2001:db8:%x:%x" $net $num
+}
+
+mirror_gre_tunnels_create()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	MIRROR_GRE_BATCH_FILE="$(mktemp)"
+	for ((i=0; i < count; ++i)); do
+		local match_dip=$(mirror_gre_ipv6_addr 1 $i)::2
+		local htun=h3-gt6-$i
+		local tun=gt6-$i
+
+		((mirror_gre_tunnels++))
+
+		ip address add dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64
+		ip address add dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64
+
+		ip address add dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64
+		ip address add dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64
+
+		tunnel_create $tun ip6gretap \
+			      $(mirror_gre_ipv6_addr 2 $i)::1 \
+			      $(mirror_gre_ipv6_addr 2 $i)::2 \
+			      ttl 100 tos inherit allow-localremote
+
+		tunnel_create $htun ip6gretap \
+			      $(mirror_gre_ipv6_addr 2 $i)::2 \
+			      $(mirror_gre_ipv6_addr 2 $i)::1
+		ip link set $htun vrf v$h3
+		matchall_sink_create $htun
+
+		cat >> $MIRROR_GRE_BATCH_FILE <<-EOF
+			filter add dev $swp1 ingress pref 1000 \
+				protocol ipv6 \
+				flower $tcflags dst_ip $match_dip \
+				action mirred egress mirror dev $tun
+		EOF
+	done
+
+	tc -b $MIRROR_GRE_BATCH_FILE
+	check_err_fail $should_fail $? "Mirror rule insertion"
+}
+
+mirror_gre_tunnels_destroy()
+{
+	local count=$1; shift
+
+	for ((i=0; i < count; ++i)); do
+		local htun=h3-gt6-$i
+		local tun=gt6-$i
+
+		ip address del dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64
+		ip address del dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64
+
+		ip address del dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64
+		ip address del dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64
+
+		tunnel_destroy $htun
+		tunnel_destroy $tun
+	done
+}
+
+__mirror_gre_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	mirror_gre_tunnels_create $count $should_fail
+	if ((should_fail)); then
+	    return
+	fi
+
+	sleep 5
+
+	for ((i = 0; i < count; ++i)); do
+		local dip=$(mirror_gre_ipv6_addr 1 $i)::2
+		local htun=h3-gt6-$i
+		local message
+
+		icmp6_capture_install $htun
+		mirror_test v$h1 "" $dip $htun 100 10
+		icmp6_capture_uninstall $htun
+	done
+}
+
+mirror_gre_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then
+		check_err 1 "Could not test offloaded functionality"
+		return
+	fi
+
+	tcflags="skip_sw"
+	__mirror_gre_test $count $should_fail
+}
+
+mirror_gre_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	mirror_gre_tunnels=0
+
+	vrf_prepare
+
+	simple_if_init $h1
+	simple_if_init $h2
+	simple_if_init $h3
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	ip link set dev $swp3 up
+}
+
+mirror_gre_cleanup()
+{
+	mirror_gre_tunnels_destroy $mirror_gre_tunnels
+
+	ip link set dev $swp3 down
+
+	ip link set dev $swp2 down
+
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+
+	ip link del dev br1
+
+	simple_if_fini $h3
+	simple_if_fini $h2
+	simple_if_fini $h1
+
+	vrf_cleanup
+}
-- 
2.4.11

[PATCH net-next 12/13] selftests: mlxsw: Add target for mirror-to-gretap test on spectrum

[Petr Machata]

Add a wrapper around mlxsw/mirror_gre_scale.sh that parameterized number
of offloadable mirrors on Spectrum machines.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
---
 .../drivers/net/mlxsw/spectrum/mirror_gre_scale.sh          | 13 +++++++++++++
 1 file changed, 13 insertions(+)
 create mode 100644 tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh

diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh
new file mode 100644
index 000000000000..8d2186c7c62b
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../mirror_gre_scale.sh
+
+mirror_gre_get_target()
+{
+	local should_fail=$1; shift
+
+	if ((! should_fail)); then
+		echo 3
+	else
+		echo 4
+	fi
+}
-- 
2.4.11

[PATCH net-next 13/13] selftests: mlxsw: Add scale test for resources

[Petr Machata]

From: Yuval Mintz <yuvalm@mellanox.com>

Add a scale test capable of validating that offloaded network
functionality is indeed functional at scale when configured to
the different KVD profiles available.

Start by testing offloaded routes are functional at scale by
passing traffic on each one of them in turn.

Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
---
 .../drivers/net/mlxsw/spectrum/resource_scale.sh   | 55 ++++++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100755 tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh

diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
new file mode 100755
index 000000000000..a0a80e1a69e8
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
@@ -0,0 +1,55 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NUM_NETIFS=6
+source ../../../../net/forwarding/lib.sh
+source ../../../../net/forwarding/tc_common.sh
+source devlink_lib_spectrum.sh
+
+current_test=""
+
+cleanup()
+{
+	pre_cleanup
+	if [ ! -z $current_test ]; then
+		${current_test}_cleanup
+	fi
+	devlink_sp_size_kvd_to_default
+}
+
+devlink_sp_read_kvd_defaults
+trap cleanup EXIT
+
+ALL_TESTS="router tc_flower mirror_gre"
+for current_test in ${TESTS:-$ALL_TESTS}; do
+	source ${current_test}_scale.sh
+
+	num_netifs_var=${current_test^^}_NUM_NETIFS
+	num_netifs=${!num_netifs_var:-$NUM_NETIFS}
+
+	for profile in $KVD_PROFILES; do
+		RET=0
+		devlink_sp_resource_kvd_profile_set $profile
+		if [[ $RET -gt 0 ]]; then
+			log_test "'$current_test' [$profile] setting"
+			continue
+		fi
+
+		for should_fail in 0 1; do
+			RET=0
+			target=$(${current_test}_get_target "$should_fail")
+			${current_test}_setup_prepare
+			setup_wait $num_netifs
+			${current_test}_test "$target" "$should_fail"
+			${current_test}_cleanup
+			if [[ "$should_fail" -eq 0 ]]; then
+				log_test "'$current_test' [$profile] $target"
+			else
+				log_test "'$current_test' [$profile] overflow $target"
+			fi
+		done
+	done
+done
+current_test=""
+
+exit "$RET"
-- 
2.4.11

Re: [PATCH net-next 00/13] mlxsw: Add resource scale tests

[David Miller]

From: Petr Machata <petrm@mellanox.com>
Date: Sat, 30 Jun 2018 02:44:23 +0200

> There are a number of tests that check features of the Linux networking
> stack. By running them on suitable interfaces, one can exercise the
> mlxsw offloading code. However none of these tests attempts to push
> mlxsw to the limits supported by the ASIC.
> 
> As an additional wrinkle, the "limits supported by the ASIC" themselves
> may not be a set of fixed numbers, but rather depend on a profile that
> determines how the ASIC resources are allocated for different purposes.
> 
> This patchset introduces several tests that verify capability of mlxsw
> to offload amounts of routes, flower rules, and mirroring sessions that
> match predicted ASIC capacity, at different configuration profiles.
> Additionally they verify that amounts exceeding the predicted capacity
> can *not* be offloaded.
 ...

Good stuff, series applied, thanks!