netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [RFCv2 0/3] tcp: Improve mtu probe preconditions
@ 2021-05-26 10:38 Leonard Crestez
  2021-05-26 10:38 ` [RFCv2 1/3] tcp: Use smaller mtu probes if RACK is enabled Leonard Crestez
                   ` (2 more replies)
  0 siblings, 3 replies; 9+ messages in thread
From: Leonard Crestez @ 2021-05-26 10:38 UTC (permalink / raw)
  To: Neal Cardwell, Matt Mathis, Eric Dumazet
  Cc: David S. Miller, Willem de Bruijn, Jakub Kicinski,
	Hideaki YOSHIFUJI, David Ahern, John Heffner, Leonard Crestez,
	Soheil Hassas Yeganeh, Roopa Prabhu, netdev, linux-kernel

According to RFC4821 Section 7.4 "Protocols MAY delay sending non-probes
in order to accumulate enough data" but in practice linux only sends
probes when a lot of data accumulates on the send side.

Another improvement is to rely on TCP RACK performing timely loss detection
with fewer outstanding packets. If this is enabled the size required for a
probe can be shrunk.

Successive successful mtu probes will result in reducing the cwnd since
it's measured in packets and we send bigger packets. The cwnd value can get
stuck below 11 on low-latency links and this prevents further probing. The
cwnd logic in tcp_mtu_probe can be reworked to be based on the the number of
packets that we actually need to send instead of arbitrary constants.

It is difficult to improve this behavior without introducing unreasonable
delays or even stalls. Looking at the current behavior of tcp_mtu_probe it
already waits in some scenarios: when there is not enough room inside cwnd
or when there is a gap of unacklowledged data between snd_una and snd_nxt.
It appears that it is safe to wait if packets_in_flight() != 0.

Signed-off-by: Leonard Crestez <cdleonard@gmail.com>

---

Previous RFC: https://lore.kernel.org/netdev/cover.1620733594.git.cdleonard@gmail.com/

This series seems to be "correct" this time, I would appreciate any feedback.
It possible my understanding of when it is safe to return 0 from tcp_mtu_probe
is incorrect. It's possible that even current code would interact poorly with
delayed acks in some circumstances?

The tcp_xmit_size_goal changes were dropped. It's still possible to see strange
interactions between tcp_push_one and mtu probing: If the receiver window is
small (60k) the sender will do a "push_one" when half a window is accumulated
(30k) and that would prevent mtu probing even if the sender is writing more
than enough data in a single syscall.

Leonard Crestez (3):
  tcp: Use smaller mtu probes if RACK is enabled
  tcp: Adjust congestion window handling for mtu probe
  tcp: Wait for sufficient data in tcp_mtu_probe

 Documentation/networking/ip-sysctl.rst | 10 ++++
 include/net/netns/ipv4.h               |  2 +
 net/ipv4/sysctl_net_ipv4.c             | 14 ++++++
 net/ipv4/tcp_ipv4.c                    |  2 +
 net/ipv4/tcp_output.c                  | 70 +++++++++++++++++++++-----
 5 files changed, 86 insertions(+), 12 deletions(-)


base-commit: e4e92ee78702b13ad55118d8b66f06e1aef62586
-- 
2.25.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-06-03 13:37 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-05-26 10:38 [RFCv2 0/3] tcp: Improve mtu probe preconditions Leonard Crestez
2021-05-26 10:38 ` [RFCv2 1/3] tcp: Use smaller mtu probes if RACK is enabled Leonard Crestez
2021-05-26 12:11   ` Neal Cardwell
2021-05-26 17:53     ` Yuchung Cheng
2021-06-03 13:37     ` Leonard Crestez
2021-05-26 10:38 ` [RFCv2 2/3] tcp: Adjust congestion window handling for mtu probe Leonard Crestez
2021-05-26 10:38 ` [RFCv2 3/3] tcp: Wait for sufficient data in tcp_mtu_probe Leonard Crestez
2021-05-26 14:35   ` Eric Dumazet
2021-06-03 13:35     ` Leonard Crestez

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).