[PATCH net-next v2 0/7] net: stmmac: FPE via ethtool + tc

[PATCH net-next v2 0/7] net: stmmac: FPE via ethtool + tc

[Furong Xu]

Move the Frame Preemption(FPE) over to the new standard API which uses
ethtool-mm/tc-mqprio/tc-taprio.

Changes in v2:
  1. refactor FPE verification processe
  2. suspend/resume and kselftest-ethtool_mm, all test cases passed
  3. handle TC:TXQ remapping for DWMAC CORE4+

Furong Xu (7):
  net: stmmac: move stmmac_fpe_cfg to stmmac_priv data
  net: stmmac: drop stmmac_fpe_handshake
  net: stmmac: refactor FPE verification processe
  net: stmmac: configure FPE via ethtool-mm
  net: stmmac: support fp parameter of tc-mqprio
  net: stmmac: support fp parameter of tc-taprio
  net: stmmac: silence FPE kernel logs

 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |  10 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c  |  96 +++++++++-
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h  |  11 +-
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |   4 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  20 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  22 +++
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  | 103 +++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 173 +++++++++---------
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   | 115 ++++++++----
 include/linux/stmmac.h                        |  28 ---
 10 files changed, 416 insertions(+), 166 deletions(-)

-- 
2.34.1

[PATCH net-next v2 1/7] net: stmmac: move stmmac_fpe_cfg to stmmac_priv data

[Furong Xu]

By moving the fpe_cfg field to the stmmac_priv data, stmmac_fpe_cfg
becomes platform-data eventually, instead of a run-time config.

Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  2 ++
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  | 29 +++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 20 ++++++-------
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   | 16 ++--------
 include/linux/stmmac.h                        | 28 ------------------
 5 files changed, 44 insertions(+), 51 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 7e90f34b8c88..28dfc0054a3a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -31,6 +31,8 @@ struct stmmac_safety_stats;
 struct dma_desc;
 struct dma_extended_desc;
 struct dma_edesc;
+struct stmmac_fpe_cfg;
+enum stmmac_mpacket_type;
 
 /* Descriptors helpers */
 struct stmmac_desc_ops {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index b23b920eedb1..2c2181febb39 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -146,6 +146,33 @@ struct stmmac_channel {
 	u32 index;
 };
 
+/* FPE link state */
+enum stmmac_fpe_state {
+	FPE_STATE_OFF = 0,
+	FPE_STATE_CAPABLE = 1,
+	FPE_STATE_ENTERING_ON = 2,
+	FPE_STATE_ON = 3,
+};
+
+/* FPE link-partner hand-shaking mPacket type */
+enum stmmac_mpacket_type {
+	MPACKET_VERIFY = 0,
+	MPACKET_RESPONSE = 1,
+};
+
+enum stmmac_fpe_task_state_t {
+	__FPE_REMOVING,
+	__FPE_TASK_SCHED,
+};
+
+struct stmmac_fpe_cfg {
+	bool enable;				/* FPE enable */
+	bool hs_enable;				/* FPE handshake enable */
+	enum stmmac_fpe_state lp_fpe_state;	/* Link Partner FPE state */
+	enum stmmac_fpe_state lo_fpe_state;	/* Local station FPE state */
+	u32 fpe_csr;				/* MAC_FPE_CTRL_STS reg cache */
+};
+
 struct stmmac_tc_entry {
 	bool in_use;
 	bool in_hw;
@@ -339,6 +366,8 @@ struct stmmac_priv {
 	struct workqueue_struct *wq;
 	struct work_struct service_task;
 
+	struct stmmac_fpe_cfg fpe_cfg;
+
 	/* Workqueue for handling FPE hand-shaking */
 	unsigned long fpe_task_state;
 	struct workqueue_struct *fpe_wq;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d9fca8d1227c..529fe31f8b04 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -968,7 +968,7 @@ static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
 
 static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
 {
-	struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
+	struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
 	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
 	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
 	bool *hs_enable = &fpe_cfg->hs_enable;
@@ -3536,7 +3536,7 @@ static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
 	if (priv->dma_cap.fpesel) {
 		stmmac_fpe_start_wq(priv);
 
-		if (priv->plat->fpe_cfg->enable)
+		if (priv->fpe_cfg.enable)
 			stmmac_fpe_handshake(priv, true);
 	}
 
@@ -5982,7 +5982,7 @@ static int stmmac_set_features(struct net_device *netdev,
 
 static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
 {
-	struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
+	struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
 	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
 	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
 	bool *hs_enable = &fpe_cfg->hs_enable;
@@ -7381,7 +7381,7 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
 {
 	struct stmmac_priv *priv = container_of(work, struct stmmac_priv,
 						fpe_task);
-	struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
+	struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
 	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
 	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
 	bool *hs_enable = &fpe_cfg->hs_enable;
@@ -7427,17 +7427,17 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
 
 void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
 {
-	if (priv->plat->fpe_cfg->hs_enable != enable) {
+	if (priv->fpe_cfg.hs_enable != enable) {
 		if (enable) {
 			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
-						priv->plat->fpe_cfg,
+						&priv->fpe_cfg,
 						MPACKET_VERIFY);
 		} else {
-			priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
-			priv->plat->fpe_cfg->lp_fpe_state = FPE_STATE_OFF;
+			priv->fpe_cfg.lo_fpe_state = FPE_STATE_OFF;
+			priv->fpe_cfg.lp_fpe_state = FPE_STATE_OFF;
 		}
 
-		priv->plat->fpe_cfg->hs_enable = enable;
+		priv->fpe_cfg.hs_enable = enable;
 	}
 }
 
@@ -7898,7 +7898,7 @@ int stmmac_suspend(struct device *dev)
 	if (priv->dma_cap.fpesel) {
 		/* Disable FPE */
 		stmmac_fpe_configure(priv, priv->ioaddr,
-				     priv->plat->fpe_cfg,
+				     &priv->fpe_cfg,
 				     priv->plat->tx_queues_to_use,
 				     priv->plat->rx_queues_to_use, false);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 996f2bcd07a2..9cc41ed01882 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -282,16 +282,6 @@ static int tc_init(struct stmmac_priv *priv)
 	if (ret)
 		return -ENOMEM;
 
-	if (!priv->plat->fpe_cfg) {
-		priv->plat->fpe_cfg = devm_kzalloc(priv->device,
-						   sizeof(*priv->plat->fpe_cfg),
-						   GFP_KERNEL);
-		if (!priv->plat->fpe_cfg)
-			return -ENOMEM;
-	} else {
-		memset(priv->plat->fpe_cfg, 0, sizeof(*priv->plat->fpe_cfg));
-	}
-
 	/* Fail silently as we can still use remaining features, e.g. CBS */
 	if (!dma_cap->frpsel)
 		return 0;
@@ -1076,7 +1066,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 	/* Actual FPE register configuration will be done after FPE handshake
 	 * is success.
 	 */
-	priv->plat->fpe_cfg->enable = fpe;
+	priv->fpe_cfg.enable = fpe;
 
 	ret = stmmac_est_configure(priv, priv, priv->est,
 				   priv->plat->clk_ptp_rate);
@@ -1109,9 +1099,9 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 		mutex_unlock(&priv->est_lock);
 	}
 
-	priv->plat->fpe_cfg->enable = false;
+	priv->fpe_cfg.enable = false;
 	stmmac_fpe_configure(priv, priv->ioaddr,
-			     priv->plat->fpe_cfg,
+			     &priv->fpe_cfg,
 			     priv->plat->tx_queues_to_use,
 			     priv->plat->rx_queues_to_use,
 			     false);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 338991c08f00..d79ff252cfdc 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -138,33 +138,6 @@ struct stmmac_txq_cfg {
 	int tbs_en;
 };
 
-/* FPE link state */
-enum stmmac_fpe_state {
-	FPE_STATE_OFF = 0,
-	FPE_STATE_CAPABLE = 1,
-	FPE_STATE_ENTERING_ON = 2,
-	FPE_STATE_ON = 3,
-};
-
-/* FPE link-partner hand-shaking mPacket type */
-enum stmmac_mpacket_type {
-	MPACKET_VERIFY = 0,
-	MPACKET_RESPONSE = 1,
-};
-
-enum stmmac_fpe_task_state_t {
-	__FPE_REMOVING,
-	__FPE_TASK_SCHED,
-};
-
-struct stmmac_fpe_cfg {
-	bool enable;				/* FPE enable */
-	bool hs_enable;				/* FPE handshake enable */
-	enum stmmac_fpe_state lp_fpe_state;	/* Link Partner FPE state */
-	enum stmmac_fpe_state lo_fpe_state;	/* Local station FPE state */
-	u32 fpe_csr;				/* MAC_FPE_CTRL_STS reg cache */
-};
-
 struct stmmac_safety_feature_cfg {
 	u32 tsoee;
 	u32 mrxpee;
@@ -232,7 +205,6 @@ struct plat_stmmacenet_data {
 	struct fwnode_handle *port_node;
 	struct device_node *mdio_node;
 	struct stmmac_dma_cfg *dma_cfg;
-	struct stmmac_fpe_cfg *fpe_cfg;
 	struct stmmac_safety_feature_cfg *safety_feat_cfg;
 	int clk_csr;
 	int has_gmac;
-- 
2.34.1

[PATCH net-next v2 2/7] net: stmmac: drop stmmac_fpe_handshake

[Furong Xu]

ethtool --set-mm can trigger FPE verification processe by calling
stmmac_fpe_send_mpacket, stmmac_fpe_handshake should be gone.

Signed-off-by: Furong Xu <0x1207@gmail.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 23 +------------------
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   |  8 -------
 2 files changed, 1 insertion(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 529fe31f8b04..3072ad33b105 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3533,13 +3533,9 @@ static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
 
 	stmmac_set_hw_vlan_mode(priv, priv->hw);
 
-	if (priv->dma_cap.fpesel) {
+	if (priv->dma_cap.fpesel)
 		stmmac_fpe_start_wq(priv);
 
-		if (priv->fpe_cfg.enable)
-			stmmac_fpe_handshake(priv, true);
-	}
-
 	return 0;
 }
 
@@ -7425,22 +7421,6 @@ static void stmmac_fpe_lp_task(struct work_struct *work)
 	clear_bit(__FPE_TASK_SCHED, &priv->fpe_task_state);
 }
 
-void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
-{
-	if (priv->fpe_cfg.hs_enable != enable) {
-		if (enable) {
-			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
-						&priv->fpe_cfg,
-						MPACKET_VERIFY);
-		} else {
-			priv->fpe_cfg.lo_fpe_state = FPE_STATE_OFF;
-			priv->fpe_cfg.lp_fpe_state = FPE_STATE_OFF;
-		}
-
-		priv->fpe_cfg.hs_enable = enable;
-	}
-}
-
 static int stmmac_xdp_rx_timestamp(const struct xdp_md *_ctx, u64 *timestamp)
 {
 	const struct stmmac_xdp_buff *ctx = (void *)_ctx;
@@ -7902,7 +7882,6 @@ int stmmac_suspend(struct device *dev)
 				     priv->plat->tx_queues_to_use,
 				     priv->plat->rx_queues_to_use, false);
 
-		stmmac_fpe_handshake(priv, false);
 		stmmac_fpe_stop_wq(priv);
 	}
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 9cc41ed01882..b0cc45331ff7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -1078,11 +1078,6 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 
 	netdev_info(priv->dev, "configured EST\n");
 
-	if (fpe) {
-		stmmac_fpe_handshake(priv, true);
-		netdev_info(priv->dev, "start FPE handshake\n");
-	}
-
 	return 0;
 
 disable:
@@ -1107,9 +1102,6 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 			     false);
 	netdev_info(priv->dev, "disabled FPE\n");
 
-	stmmac_fpe_handshake(priv, false);
-	netdev_info(priv->dev, "stop FPE handshake\n");
-
 	return ret;
 }
 
-- 
2.34.1

[PATCH net-next v2 3/7] net: stmmac: refactor FPE verification processe

[Furong Xu]

Drop driver defined stmmac_fpe_state, and switch to common
ethtool_mm_verify_status for local TX verification status.

Local side and remote side verification processes are completely
independent. There is no reason at all to keep a local state and
a remote state.

Add a spinlock to avoid races between ISR and workqueue.

Signed-off-by: Furong Xu <0x1207@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  17 +-
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 150 ++++++++++--------
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   |   6 -
 3 files changed, 87 insertions(+), 86 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 2c2181febb39..26ee1dbcccae 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -146,14 +146,6 @@ struct stmmac_channel {
 	u32 index;
 };
 
-/* FPE link state */
-enum stmmac_fpe_state {
-	FPE_STATE_OFF = 0,
-	FPE_STATE_CAPABLE = 1,
-	FPE_STATE_ENTERING_ON = 2,
-	FPE_STATE_ON = 3,
-};
-
 /* FPE link-partner hand-shaking mPacket type */
 enum stmmac_mpacket_type {
 	MPACKET_VERIFY = 0,
@@ -166,10 +158,10 @@ enum stmmac_fpe_task_state_t {
 };
 
 struct stmmac_fpe_cfg {
-	bool enable;				/* FPE enable */
-	bool hs_enable;				/* FPE handshake enable */
-	enum stmmac_fpe_state lp_fpe_state;	/* Link Partner FPE state */
-	enum stmmac_fpe_state lo_fpe_state;	/* Local station FPE state */
+	bool pmac_enabled;			/* see ethtool_mm_state */
+	bool verify_enabled;			/* see ethtool_mm_state */
+	u32 verify_time;			/* see ethtool_mm_state */
+	enum ethtool_mm_verify_status status;
 	u32 fpe_csr;				/* MAC_FPE_CTRL_STS reg cache */
 };
 
@@ -366,6 +358,7 @@ struct stmmac_priv {
 	struct workqueue_struct *wq;
 	struct work_struct service_task;
 
+	spinlock_t mm_lock;
 	struct stmmac_fpe_cfg fpe_cfg;
 
 	/* Workqueue for handling FPE hand-shaking */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 3072ad33b105..a21268492475 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -969,16 +969,18 @@ static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
 static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
 {
 	struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
-	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
-	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
-	bool *hs_enable = &fpe_cfg->hs_enable;
+	unsigned long flags;
+
+	if (!fpe_cfg->pmac_enabled)
+		return;
 
-	if (is_up && *hs_enable) {
+	if (is_up && fpe_cfg->verify_enabled) {
 		stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
 					MPACKET_VERIFY);
 	} else {
-		*lo_state = FPE_STATE_OFF;
-		*lp_state = FPE_STATE_OFF;
+		spin_lock_irqsave(&priv->mm_lock, flags);
+		fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
+		spin_unlock_irqrestore(&priv->mm_lock, flags);
 	}
 }
 
@@ -3533,9 +3535,16 @@ static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
 
 	stmmac_set_hw_vlan_mode(priv, priv->hw);
 
-	if (priv->dma_cap.fpesel)
+	if (priv->dma_cap.fpesel) {
 		stmmac_fpe_start_wq(priv);
 
+		stmmac_fpe_configure(priv, priv->ioaddr,
+				     &priv->fpe_cfg,
+				     priv->plat->tx_queues_to_use,
+				     priv->plat->rx_queues_to_use,
+				     false);
+	}
+
 	return 0;
 }
 
@@ -3978,6 +3987,11 @@ static int __stmmac_open(struct net_device *dev,
 		}
 	}
 
+	priv->fpe_cfg.pmac_enabled = false;
+	priv->fpe_cfg.verify_time = 128; /* ethtool_mm_state.max_verify_time */
+	priv->fpe_cfg.verify_enabled = false;
+	priv->fpe_cfg.status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
+
 	ret = stmmac_hw_setup(dev, true);
 	if (ret < 0) {
 		netdev_err(priv->dev, "%s: Hw setup failed\n", __func__);
@@ -4091,6 +4105,16 @@ static int stmmac_release(struct net_device *dev)
 
 	stmmac_release_ptp(priv);
 
+	stmmac_fpe_configure(priv, priv->ioaddr,
+			     &priv->fpe_cfg,
+			     priv->plat->tx_queues_to_use,
+			     priv->plat->rx_queues_to_use,
+			     false);
+
+	priv->fpe_cfg.pmac_enabled = false;
+	priv->fpe_cfg.verify_enabled = false;
+	priv->fpe_cfg.status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
+
 	pm_runtime_put(priv->device);
 
 	if (priv->dma_cap.fpesel)
@@ -5979,38 +6003,26 @@ static int stmmac_set_features(struct net_device *netdev,
 static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
 {
 	struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
-	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
-	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
-	bool *hs_enable = &fpe_cfg->hs_enable;
 
-	if (status == FPE_EVENT_UNKNOWN || !*hs_enable)
+	if (!fpe_cfg->pmac_enabled || status == FPE_EVENT_UNKNOWN)
 		return;
 
-	/* If LP has sent verify mPacket, LP is FPE capable */
-	if ((status & FPE_EVENT_RVER) == FPE_EVENT_RVER) {
-		if (*lp_state < FPE_STATE_CAPABLE)
-			*lp_state = FPE_STATE_CAPABLE;
+	/* LP has sent verify mPacket */
+	if ((status & FPE_EVENT_RVER) == FPE_EVENT_RVER)
+		stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
+					MPACKET_RESPONSE);
 
-		/* If user has requested FPE enable, quickly response */
-		if (*hs_enable)
-			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
-						fpe_cfg,
-						MPACKET_RESPONSE);
-	}
+	spin_lock(&priv->mm_lock);
 
-	/* If Local has sent verify mPacket, Local is FPE capable */
-	if ((status & FPE_EVENT_TVER) == FPE_EVENT_TVER) {
-		if (*lo_state < FPE_STATE_CAPABLE)
-			*lo_state = FPE_STATE_CAPABLE;
-	}
+	/* Local has sent verify mPacket */
+	if ((status & FPE_EVENT_TVER) == FPE_EVENT_TVER)
+		fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_VERIFYING;
 
-	/* If LP has sent response mPacket, LP is entering FPE ON */
+	/* LP has sent response mPacket */
 	if ((status & FPE_EVENT_RRSP) == FPE_EVENT_RRSP)
-		*lp_state = FPE_STATE_ENTERING_ON;
+		fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED;
 
-	/* If Local has sent response mPacket, Local is entering FPE ON */
-	if ((status & FPE_EVENT_TRSP) == FPE_EVENT_TRSP)
-		*lo_state = FPE_STATE_ENTERING_ON;
+	spin_unlock(&priv->mm_lock);
 
 	if (!test_bit(__FPE_REMOVING, &priv->fpe_task_state) &&
 	    !test_and_set_bit(__FPE_TASK_SCHED, &priv->fpe_task_state) &&
@@ -7372,50 +7384,51 @@ int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size)
 	return ret;
 }
 
-#define SEND_VERIFY_MPAKCET_FMT "Send Verify mPacket lo_state=%d lp_state=%d\n"
-static void stmmac_fpe_lp_task(struct work_struct *work)
+static void stmmac_fpe_verify_task(struct work_struct *work)
 {
 	struct stmmac_priv *priv = container_of(work, struct stmmac_priv,
 						fpe_task);
 	struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
-	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
-	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
-	bool *hs_enable = &fpe_cfg->hs_enable;
-	bool *enable = &fpe_cfg->enable;
-	int retries = 20;
-
-	while (retries-- > 0) {
-		/* Bail out immediately if FPE handshake is OFF */
-		if (*lo_state == FPE_STATE_OFF || !*hs_enable)
-			break;
-
-		if (*lo_state == FPE_STATE_ENTERING_ON &&
-		    *lp_state == FPE_STATE_ENTERING_ON) {
-			stmmac_fpe_configure(priv, priv->ioaddr,
-					     fpe_cfg,
-					     priv->plat->tx_queues_to_use,
-					     priv->plat->rx_queues_to_use,
-					     *enable);
-
-			netdev_info(priv->dev, "configured FPE\n");
+	int verify_limit = 3; /* defined by 802.3 */
+	unsigned long flags;
 
-			*lo_state = FPE_STATE_ON;
-			*lp_state = FPE_STATE_ON;
-			netdev_info(priv->dev, "!!! BOTH FPE stations ON\n");
+	while (verify_limit > 0) {
+		if (fpe_cfg->status == ETHTOOL_MM_VERIFY_STATUS_DISABLED ||
+		    fpe_cfg->status == ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED ||
+		    !fpe_cfg->pmac_enabled || !fpe_cfg->verify_enabled)
 			break;
-		}
 
-		if ((*lo_state == FPE_STATE_CAPABLE ||
-		     *lo_state == FPE_STATE_ENTERING_ON) &&
-		     *lp_state != FPE_STATE_ON) {
-			netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
-				    *lo_state, *lp_state);
-			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
-						fpe_cfg,
+		if (fpe_cfg->status == ETHTOOL_MM_VERIFY_STATUS_VERIFYING)
+			stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
 						MPACKET_VERIFY);
-		}
+
 		/* Sleep then retry */
-		msleep(500);
+		msleep(fpe_cfg->verify_time);
+		verify_limit--;
+	}
+
+	if (fpe_cfg->status == ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED) {
+		spin_lock_irqsave(&priv->mm_lock, flags);
+
+		stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
+				     priv->plat->tx_queues_to_use,
+				     priv->plat->rx_queues_to_use,
+				     true);
+
+		spin_unlock_irqrestore(&priv->mm_lock, flags);
+	}
+
+	if (verify_limit == 0) {
+		spin_lock_irqsave(&priv->mm_lock, flags);
+
+		fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_FAILED;
+		fpe_cfg->verify_enabled = false;
+		stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
+				     priv->plat->tx_queues_to_use,
+				     priv->plat->rx_queues_to_use,
+				     false);
+
+		spin_unlock_irqrestore(&priv->mm_lock, flags);
 	}
 
 	clear_bit(__FPE_TASK_SCHED, &priv->fpe_task_state);
@@ -7535,8 +7548,8 @@ int stmmac_dvr_probe(struct device *device,
 
 	INIT_WORK(&priv->service_task, stmmac_service_task);
 
-	/* Initialize Link Partner FPE workqueue */
-	INIT_WORK(&priv->fpe_task, stmmac_fpe_lp_task);
+	/* Initialize FPE verify workqueue */
+	INIT_WORK(&priv->fpe_task, stmmac_fpe_verify_task);
 
 	/* Override with kernel parameters if supplied XXX CRS XXX
 	 * this needs to have multiple instances
@@ -7701,6 +7714,7 @@ int stmmac_dvr_probe(struct device *device,
 	stmmac_napi_add(ndev);
 
 	mutex_init(&priv->lock);
+	spin_lock_init(&priv->mm_lock);
 
 	/* If a specific clk_csr value is passed from the platform
 	 * this means that the CSR Clock Range selection cannot be
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index b0cc45331ff7..783829a6479c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -1063,11 +1063,6 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 		return -EOPNOTSUPP;
 	}
 
-	/* Actual FPE register configuration will be done after FPE handshake
-	 * is success.
-	 */
-	priv->fpe_cfg.enable = fpe;
-
 	ret = stmmac_est_configure(priv, priv, priv->est,
 				   priv->plat->clk_ptp_rate);
 	mutex_unlock(&priv->est_lock);
@@ -1094,7 +1089,6 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 		mutex_unlock(&priv->est_lock);
 	}
 
-	priv->fpe_cfg.enable = false;
 	stmmac_fpe_configure(priv, priv->ioaddr,
 			     &priv->fpe_cfg,
 			     priv->plat->tx_queues_to_use,
-- 
2.34.1

[PATCH net-next v2 4/7] net: stmmac: configure FPE via ethtool-mm

[Furong Xu]

Implement ethtool --show-mm and --set-mm callbacks.

NIC up/down, link up/down, suspend/resume, kselftest-ethtool_mm,
all tested okay.

Signed-off-by: Furong Xu <0x1207@gmail.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |   8 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c  |  36 +++++-
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h  |   7 +-
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |   4 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |   8 +-
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  | 103 ++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  10 +-
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   |   2 +-
 8 files changed, 162 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 31c387cc5f26..679efcc631f1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -58,10 +58,6 @@ static void dwmac4_core_init(struct mac_device_info *hw,
 	if (hw->pcs)
 		value |= GMAC_PCS_IRQ_DEFAULT;
 
-	/* Enable FPE interrupt */
-	if ((GMAC_HW_FEAT_FPESEL & readl(ioaddr + GMAC_HW_FEATURE3)) >> 26)
-		value |= GMAC_INT_FPE_EN;
-
 	writel(value, ioaddr + GMAC_INT_EN);
 
 	if (GMAC_INT_DEFAULT_ENABLE & GMAC_INT_TSIE)
@@ -1268,6 +1264,8 @@ const struct stmmac_ops dwmac410_ops = {
 	.fpe_configure = dwmac5_fpe_configure,
 	.fpe_send_mpacket = dwmac5_fpe_send_mpacket,
 	.fpe_irq_status = dwmac5_fpe_irq_status,
+	.fpe_get_add_frag_size = dwmac5_fpe_get_add_frag_size,
+	.fpe_set_add_frag_size = dwmac5_fpe_set_add_frag_size,
 	.add_hw_vlan_rx_fltr = dwmac4_add_hw_vlan_rx_fltr,
 	.del_hw_vlan_rx_fltr = dwmac4_del_hw_vlan_rx_fltr,
 	.restore_hw_vlan_rx_fltr = dwmac4_restore_hw_vlan_rx_fltr,
@@ -1320,6 +1318,8 @@ const struct stmmac_ops dwmac510_ops = {
 	.fpe_configure = dwmac5_fpe_configure,
 	.fpe_send_mpacket = dwmac5_fpe_send_mpacket,
 	.fpe_irq_status = dwmac5_fpe_irq_status,
+	.fpe_get_add_frag_size = dwmac5_fpe_get_add_frag_size,
+	.fpe_set_add_frag_size = dwmac5_fpe_set_add_frag_size,
 	.add_hw_vlan_rx_fltr = dwmac4_add_hw_vlan_rx_fltr,
 	.del_hw_vlan_rx_fltr = dwmac4_del_hw_vlan_rx_fltr,
 	.restore_hw_vlan_rx_fltr = dwmac4_restore_hw_vlan_rx_fltr,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
index e02cebc3f1b7..4c91fa766b13 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
@@ -575,11 +575,11 @@ int dwmac5_flex_pps_config(void __iomem *ioaddr, int index,
 
 void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 			  u32 num_txq, u32 num_rxq,
-			  bool enable)
+			  bool tx_enable, bool pmac_enable)
 {
 	u32 value;
 
-	if (enable) {
+	if (tx_enable) {
 		cfg->fpe_csr = EFPE;
 		value = readl(ioaddr + GMAC_RXQ_CTRL1);
 		value &= ~GMAC_RXQCTRL_FPRQ;
@@ -589,6 +589,21 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 		cfg->fpe_csr = 0;
 	}
 	writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS);
+
+	value = readl(ioaddr + GMAC_INT_EN);
+
+	if (pmac_enable) {
+		if (!(value & GMAC_INT_FPE_EN)) {
+			/* Dummy read to clear any pending masked interrupts */
+			(void)readl(ioaddr + MAC_FPE_CTRL_STS);
+
+			value |= GMAC_INT_FPE_EN;
+		}
+	} else {
+		value &= ~GMAC_INT_FPE_EN;
+	}
+
+	writel(value, ioaddr + GMAC_INT_EN);
 }
 
 int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
@@ -638,3 +653,20 @@ void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 
 	writel(value, ioaddr + MAC_FPE_CTRL_STS);
 }
+
+int dwmac5_fpe_get_add_frag_size(void __iomem *ioaddr)
+{
+	return FIELD_GET(AFSZ, readl(ioaddr + MTL_FPE_CTRL_STS));
+}
+
+void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size)
+{
+	u32 value;
+
+	value = readl(ioaddr + MTL_FPE_CTRL_STS);
+
+	value &= ~AFSZ;
+	value |= FIELD_PREP(AFSZ, add_frag_size);
+
+	writel(value, ioaddr + MTL_FPE_CTRL_STS);
+}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
index bf33a51d229e..e369e65920fc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
@@ -39,6 +39,9 @@
 #define MAC_PPSx_INTERVAL(x)		(0x00000b88 + ((x) * 0x10))
 #define MAC_PPSx_WIDTH(x)		(0x00000b8c + ((x) * 0x10))
 
+#define MTL_FPE_CTRL_STS		0x00000c90
+#define AFSZ				GENMASK(1, 0)
+
 #define MTL_RXP_CONTROL_STATUS		0x00000ca0
 #define RXPI				BIT(31)
 #define NPE				GENMASK(23, 16)
@@ -104,10 +107,12 @@ int dwmac5_flex_pps_config(void __iomem *ioaddr, int index,
 			   u32 sub_second_inc, u32 systime_flags);
 void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 			  u32 num_txq, u32 num_rxq,
-			  bool enable);
+			  bool tx_enable, bool pmac_enable);
 void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
 			     struct stmmac_fpe_cfg *cfg,
 			     enum stmmac_mpacket_type type);
 int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
+int dwmac5_fpe_get_add_frag_size(void __iomem *ioaddr);
+void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size);
 
 #endif /* __DWMAC5_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index cbf2dd976ab1..55a175ced77f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -1506,11 +1506,11 @@ static void dwxgmac2_set_arp_offload(struct mac_device_info *hw, bool en,
 
 static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 				   u32 num_txq,
-				   u32 num_rxq, bool enable)
+				   u32 num_rxq, bool tx_enable, bool pmac_enable)
 {
 	u32 value;
 
-	if (!enable) {
+	if (!tx_enable) {
 		value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
 
 		value &= ~XGMAC_EFPE;
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 28dfc0054a3a..31767427386b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -421,11 +421,13 @@ struct stmmac_ops {
 	void (*set_arp_offload)(struct mac_device_info *hw, bool en, u32 addr);
 	void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 			      u32 num_txq, u32 num_rxq,
-			      bool enable);
+			      bool tx_enable, bool pmac_enable);
 	void (*fpe_send_mpacket)(void __iomem *ioaddr,
 				 struct stmmac_fpe_cfg *cfg,
 				 enum stmmac_mpacket_type type);
 	int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
+	int (*fpe_get_add_frag_size)(void __iomem *ioaddr);
+	void (*fpe_set_add_frag_size)(void __iomem *ioaddr, u32 add_frag_size);
 };
 
 #define stmmac_core_init(__priv, __args...) \
@@ -530,6 +532,10 @@ struct stmmac_ops {
 	stmmac_do_void_callback(__priv, mac, fpe_send_mpacket, __args)
 #define stmmac_fpe_irq_status(__priv, __args...) \
 	stmmac_do_callback(__priv, mac, fpe_irq_status, __args)
+#define stmmac_fpe_get_add_frag_size(__priv, __args...) \
+	stmmac_do_callback(__priv, mac, fpe_get_add_frag_size, __args)
+#define stmmac_fpe_set_add_frag_size(__priv, __args...) \
+	stmmac_do_void_callback(__priv, mac, fpe_set_add_frag_size, __args)
 
 /* PTP and HW Timer helpers */
 struct stmmac_hwtimestamp {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 7008219fd88d..ddbd33a1bc13 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -19,6 +19,7 @@
 #include "stmmac.h"
 #include "dwmac_dma.h"
 #include "dwxgmac2.h"
+#include "dwmac5.h"
 
 #define REG_SPACE_SIZE	0x1060
 #define GMAC4_REG_SPACE_SIZE	0x116C
@@ -1270,6 +1271,105 @@ static int stmmac_set_tunable(struct net_device *dev,
 	return ret;
 }
 
+static int stmmac_get_mm(struct net_device *ndev,
+			 struct ethtool_mm_state *state)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	u32 add_frag_size;
+
+	if (!priv->dma_cap.fpesel)
+		return -EOPNOTSUPP;
+
+	state->pmac_enabled = priv->fpe_cfg.pmac_enabled;
+	state->verify_time = priv->fpe_cfg.verify_time;
+	state->verify_enabled = priv->fpe_cfg.verify_enabled;
+	state->verify_status = priv->fpe_cfg.status;
+	state->rx_min_frag_size = ETH_ZLEN;
+
+	/* 802.3-2018 clause 30.14.1.6, says that the aMACMergeVerifyTime
+	 * variable has a range between 1 and 128 ms inclusive. Limit to that.
+	 */
+	state->max_verify_time = 128;
+
+	/* Cannot read MAC_FPE_CTRL_STS register here, or FPE interrupt events
+	 * can be lost.
+	 *
+	 * See commit 37e4b8df27bc ("net: stmmac: fix FPE events losing")
+	 */
+	state->tx_enabled = !!(priv->fpe_cfg.fpe_csr == EFPE);
+
+	/* FPE active if common tx_enabled and verification success or disabled (forced) */
+	state->tx_active = state->tx_enabled &&
+			   (state->verify_status == ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED ||
+			    state->verify_status == ETHTOOL_MM_VERIFY_STATUS_DISABLED);
+
+	add_frag_size = stmmac_fpe_get_add_frag_size(priv, priv->ioaddr);
+	state->tx_min_frag_size = ethtool_mm_frag_size_add_to_min(add_frag_size);
+
+	return 0;
+}
+
+static int stmmac_set_mm(struct net_device *ndev, struct ethtool_mm_cfg *cfg,
+			 struct netlink_ext_ack *extack)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
+	unsigned long flags;
+	u32 add_frag_size;
+	int err;
+
+	if (!priv->dma_cap.fpesel)
+		return -EOPNOTSUPP;
+
+	err = ethtool_mm_frag_size_min_to_add(cfg->tx_min_frag_size,
+					      &add_frag_size, extack);
+	if (err)
+		return err;
+
+	stmmac_fpe_set_add_frag_size(priv, priv->ioaddr, add_frag_size);
+
+	spin_lock_irqsave(&priv->mm_lock, flags);
+
+	fpe_cfg->pmac_enabled = cfg->pmac_enabled;
+	fpe_cfg->verify_time = cfg->verify_time;
+	fpe_cfg->verify_enabled = cfg->verify_enabled;
+
+	if (!cfg->verify_enabled)
+		fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
+
+	stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
+			     priv->plat->tx_queues_to_use,
+			     priv->plat->rx_queues_to_use,
+			     cfg->tx_enabled, cfg->pmac_enabled);
+
+	spin_unlock_irqrestore(&priv->mm_lock, flags);
+
+	if (cfg->verify_enabled)
+		stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
+					MPACKET_VERIFY);
+
+	return 0;
+}
+
+static void stmmac_get_mm_stats(struct net_device *ndev,
+				struct ethtool_mm_stats *s)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	struct stmmac_counters *mmc = &priv->mmc;
+
+	if (!priv->dma_cap.rmon)
+		return;
+
+	stmmac_mmc_read(priv, priv->mmcaddr, mmc);
+
+	s->MACMergeFrameAssErrorCount = mmc->mmc_rx_packet_assembly_err_cntr;
+	s->MACMergeFrameSmdErrorCount = mmc->mmc_rx_packet_smd_err_cntr;
+	s->MACMergeFrameAssOkCount = mmc->mmc_rx_packet_assembly_ok_cntr;
+	s->MACMergeFragCountRx = mmc->mmc_rx_fpe_fragment_cntr;
+	s->MACMergeFragCountTx = mmc->mmc_tx_fpe_fragment_cntr;
+	s->MACMergeHoldCount = mmc->mmc_tx_hold_req_cntr;
+}
+
 static const struct ethtool_ops stmmac_ethtool_ops = {
 	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
 				     ETHTOOL_COALESCE_MAX_FRAMES,
@@ -1309,6 +1409,9 @@ static const struct ethtool_ops stmmac_ethtool_ops = {
 	.set_tunable = stmmac_set_tunable,
 	.get_link_ksettings = stmmac_ethtool_get_link_ksettings,
 	.set_link_ksettings = stmmac_ethtool_set_link_ksettings,
+	.get_mm = stmmac_get_mm,
+	.set_mm = stmmac_set_mm,
+	.get_mm_stats = stmmac_get_mm_stats,
 };
 
 void stmmac_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a21268492475..cc91811eedf0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3542,7 +3542,7 @@ static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
 				     &priv->fpe_cfg,
 				     priv->plat->tx_queues_to_use,
 				     priv->plat->rx_queues_to_use,
-				     false);
+				     false, priv->fpe_cfg.pmac_enabled);
 	}
 
 	return 0;
@@ -4109,7 +4109,7 @@ static int stmmac_release(struct net_device *dev)
 			     &priv->fpe_cfg,
 			     priv->plat->tx_queues_to_use,
 			     priv->plat->rx_queues_to_use,
-			     false);
+			     false, false);
 
 	priv->fpe_cfg.pmac_enabled = false;
 	priv->fpe_cfg.verify_enabled = false;
@@ -7413,7 +7413,7 @@ static void stmmac_fpe_verify_task(struct work_struct *work)
 		stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
 				     priv->plat->tx_queues_to_use,
 				     priv->plat->rx_queues_to_use,
-				     true);
+				     true, fpe_cfg->pmac_enabled);
 
 		spin_unlock_irqrestore(&priv->mm_lock, flags);
 	}
@@ -7426,7 +7426,7 @@ static void stmmac_fpe_verify_task(struct work_struct *work)
 		stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
 				     priv->plat->tx_queues_to_use,
 				     priv->plat->rx_queues_to_use,
-				     false);
+				     false, fpe_cfg->pmac_enabled);
 
 		spin_unlock_irqrestore(&priv->mm_lock, flags);
 	}
@@ -7894,7 +7894,7 @@ int stmmac_suspend(struct device *dev)
 		stmmac_fpe_configure(priv, priv->ioaddr,
 				     &priv->fpe_cfg,
 				     priv->plat->tx_queues_to_use,
-				     priv->plat->rx_queues_to_use, false);
+				     priv->plat->rx_queues_to_use, false, false);
 
 		stmmac_fpe_stop_wq(priv);
 	}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 783829a6479c..a58282d6458c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -1093,7 +1093,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 			     &priv->fpe_cfg,
 			     priv->plat->tx_queues_to_use,
 			     priv->plat->rx_queues_to_use,
-			     false);
+			     false, false);
 	netdev_info(priv->dev, "disabled FPE\n");
 
 	return ret;
-- 
2.34.1

[PATCH net-next v2 5/7] net: stmmac: support fp parameter of tc-mqprio

[Furong Xu]

tc-mqprio can select whether traffic classes are express or preemptible.

After some traffic tests, MAC merge layer statistics are all good.

Local device:
ethtool --include-statistics --json --show-mm eth1
[ {
        "ifname": "eth1",
        "pmac-enabled": true,
        "tx-enabled": true,
        "tx-active": true,
        "tx-min-frag-size": 60,
        "rx-min-frag-size": 60,
        "verify-enabled": true,
        "verify-time": 100,
        "max-verify-time": 128,
        "verify-status": "SUCCEEDED",
        "statistics": {
            "MACMergeFrameAssErrorCount": 0,
            "MACMergeFrameSmdErrorCount": 0,
            "MACMergeFrameAssOkCount": 0,
            "MACMergeFragCountRx": 0,
            "MACMergeFragCountTx": 35105,
            "MACMergeHoldCount": 0
        }
    } ]

Remote device:
ethtool --include-statistics --json --show-mm end1
[ {
        "ifname": "end1",
        "pmac-enabled": true,
        "tx-enabled": true,
        "tx-active": true,
        "tx-min-frag-size": 60,
        "rx-min-frag-size": 60,
        "verify-enabled": true,
        "verify-time": 100,
        "max-verify-time": 128,
        "verify-status": "SUCCEEDED",
        "statistics": {
            "MACMergeFrameAssErrorCount": 0,
            "MACMergeFrameSmdErrorCount": 0,
            "MACMergeFrameAssOkCount": 35105,
            "MACMergeFragCountRx": 35105,
            "MACMergeFragCountTx": 0,
            "MACMergeHoldCount": 0
        }
    } ]

Tested on DWMAC CORE 5.10a

Signed-off-by: Furong Xu <0x1207@gmail.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |  2 +
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c  | 52 +++++++++++++
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h  |  4 +
 drivers/net/ethernet/stmicro/stmmac/hwif.h    | 10 +++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  2 +
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   | 74 +++++++++++++++++++
 6 files changed, 144 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 679efcc631f1..4722bac7e3d4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -1266,6 +1266,7 @@ const struct stmmac_ops dwmac410_ops = {
 	.fpe_irq_status = dwmac5_fpe_irq_status,
 	.fpe_get_add_frag_size = dwmac5_fpe_get_add_frag_size,
 	.fpe_set_add_frag_size = dwmac5_fpe_set_add_frag_size,
+	.fpe_set_preemptible_tcs = dwmac5_fpe_set_preemptible_tcs,
 	.add_hw_vlan_rx_fltr = dwmac4_add_hw_vlan_rx_fltr,
 	.del_hw_vlan_rx_fltr = dwmac4_del_hw_vlan_rx_fltr,
 	.restore_hw_vlan_rx_fltr = dwmac4_restore_hw_vlan_rx_fltr,
@@ -1320,6 +1321,7 @@ const struct stmmac_ops dwmac510_ops = {
 	.fpe_irq_status = dwmac5_fpe_irq_status,
 	.fpe_get_add_frag_size = dwmac5_fpe_get_add_frag_size,
 	.fpe_set_add_frag_size = dwmac5_fpe_set_add_frag_size,
+	.fpe_set_preemptible_tcs = dwmac5_fpe_set_preemptible_tcs,
 	.add_hw_vlan_rx_fltr = dwmac4_add_hw_vlan_rx_fltr,
 	.del_hw_vlan_rx_fltr = dwmac4_del_hw_vlan_rx_fltr,
 	.restore_hw_vlan_rx_fltr = dwmac4_restore_hw_vlan_rx_fltr,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
index 4c91fa766b13..b6114de34b31 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
@@ -670,3 +670,55 @@ void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size)
 
 	writel(value, ioaddr + MTL_FPE_CTRL_STS);
 }
+
+int dwmac5_fpe_set_preemptible_tcs(struct net_device *ndev,
+				   struct netlink_ext_ack *extack,
+				   unsigned long tcs)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	void __iomem *ioaddr = priv->ioaddr;
+	unsigned long queue_tcs = 0;
+	int num_tc = ndev->num_tc;
+	u32 value, queue_weight;
+	u16 offset, count;
+	int tc, i;
+
+	if (!tcs)
+		goto __update_queue_tcs;
+
+	for (tc = 0; tc < num_tc; tc++) {
+		count = ndev->tc_to_txq[tc].count;
+		offset = ndev->tc_to_txq[tc].offset;
+
+		if (tcs & BIT(tc))
+			queue_tcs |= GENMASK(offset + count - 1, offset);
+
+		/* This is 1:1 mapping, go to next TC */
+		if (count == 1)
+			continue;
+
+		if (priv->plat->tx_sched_algorithm == MTL_TX_ALGORITHM_SP) {
+			NL_SET_ERR_MSG_FMT_MOD(extack, "TX algorithm SP is not suitable for one TC to multiple TXQs mapping");
+			return -EINVAL;
+		}
+
+		queue_weight = priv->plat->tx_queues_cfg[offset].weight;
+		for (i = 1; i < count; i++) {
+			if (queue_weight != priv->plat->tx_queues_cfg[offset + i].weight) {
+				NL_SET_ERR_MSG_FMT_MOD(extack, "TXQ weight [%u] differs across other TXQs in TC: [%u]",
+						       queue_weight, tc);
+				return -EINVAL;
+			}
+		}
+	}
+
+__update_queue_tcs:
+	value = readl(ioaddr + MTL_FPE_CTRL_STS);
+
+	value &= ~PEC;
+	value |= FIELD_PREP(PEC, queue_tcs);
+
+	writel(value, ioaddr + MTL_FPE_CTRL_STS);
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
index e369e65920fc..d3191c48354d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
@@ -40,6 +40,7 @@
 #define MAC_PPSx_WIDTH(x)		(0x00000b8c + ((x) * 0x10))
 
 #define MTL_FPE_CTRL_STS		0x00000c90
+#define PEC				GENMASK(15, 8)
 #define AFSZ				GENMASK(1, 0)
 
 #define MTL_RXP_CONTROL_STATUS		0x00000ca0
@@ -114,5 +115,8 @@ void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
 int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
 int dwmac5_fpe_get_add_frag_size(void __iomem *ioaddr);
 void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size);
+int dwmac5_fpe_set_preemptible_tcs(struct net_device *ndev,
+				   struct netlink_ext_ack *extack,
+				   unsigned long tcs);
 
 #endif /* __DWMAC5_H__ */
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index 31767427386b..a02b0f7ed96b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -7,6 +7,7 @@
 
 #include <linux/netdevice.h>
 #include <linux/stmmac.h>
+#include <net/pkt_cls.h>
 
 #define stmmac_do_void_callback(__priv, __module, __cname,  __arg0, __args...) \
 ({ \
@@ -428,6 +429,9 @@ struct stmmac_ops {
 	int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
 	int (*fpe_get_add_frag_size)(void __iomem *ioaddr);
 	void (*fpe_set_add_frag_size)(void __iomem *ioaddr, u32 add_frag_size);
+	int (*fpe_set_preemptible_tcs)(struct net_device *ndev,
+				       struct netlink_ext_ack *extack,
+				       unsigned long tcs);
 };
 
 #define stmmac_core_init(__priv, __args...) \
@@ -536,6 +540,8 @@ struct stmmac_ops {
 	stmmac_do_callback(__priv, mac, fpe_get_add_frag_size, __args)
 #define stmmac_fpe_set_add_frag_size(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, fpe_set_add_frag_size, __args)
+#define stmmac_fpe_set_preemptible_tcs(__priv, __args...) \
+	stmmac_do_callback(__priv, mac, fpe_set_preemptible_tcs, __args)
 
 /* PTP and HW Timer helpers */
 struct stmmac_hwtimestamp {
@@ -623,6 +629,8 @@ struct stmmac_tc_ops {
 			 struct tc_etf_qopt_offload *qopt);
 	int (*query_caps)(struct stmmac_priv *priv,
 			  struct tc_query_caps_base *base);
+	int (*setup_mqprio)(struct stmmac_priv *priv,
+			    struct tc_mqprio_qopt_offload *qopt);
 };
 
 #define stmmac_tc_init(__priv, __args...) \
@@ -639,6 +647,8 @@ struct stmmac_tc_ops {
 	stmmac_do_callback(__priv, tc, setup_etf, __args)
 #define stmmac_tc_query_caps(__priv, __args...) \
 	stmmac_do_callback(__priv, tc, query_caps, __args)
+#define stmmac_tc_setup_mqprio(__priv, __args...) \
+	stmmac_do_callback(__priv, tc, setup_mqprio, __args)
 
 struct stmmac_counters;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index cc91811eedf0..15c07ee944b4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -6265,6 +6265,8 @@ static int stmmac_setup_tc(struct net_device *ndev, enum tc_setup_type type,
 	switch (type) {
 	case TC_QUERY_CAPS:
 		return stmmac_tc_query_caps(priv, priv, type_data);
+	case TC_SETUP_QDISC_MQPRIO:
+		return stmmac_tc_setup_mqprio(priv, priv, type_data);
 	case TC_SETUP_BLOCK:
 		return flow_block_cb_setup_simple(type_data,
 						  &stmmac_block_cb_list,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index a58282d6458c..a967c6f01e4e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -1174,6 +1174,13 @@ static int tc_query_caps(struct stmmac_priv *priv,
 			 struct tc_query_caps_base *base)
 {
 	switch (base->type) {
+	case TC_SETUP_QDISC_MQPRIO: {
+		struct tc_mqprio_caps *caps = base->caps;
+
+		caps->validate_queue_counts = true;
+
+		return 0;
+	}
 	case TC_SETUP_QDISC_TAPRIO: {
 		struct tc_taprio_caps *caps = base->caps;
 
@@ -1190,6 +1197,72 @@ static int tc_query_caps(struct stmmac_priv *priv,
 	}
 }
 
+static void stmmac_reset_tc_mqprio(struct net_device *ndev,
+				   struct netlink_ext_ack *extack)
+{
+	struct stmmac_priv *priv = netdev_priv(ndev);
+
+	netdev_reset_tc(ndev);
+	netif_set_real_num_tx_queues(ndev, priv->plat->tx_queues_to_use);
+
+	stmmac_fpe_set_preemptible_tcs(priv, ndev, extack, 0);
+}
+
+static int tc_setup_mqprio(struct stmmac_priv *priv,
+			   struct tc_mqprio_qopt_offload *mqprio)
+{
+	struct tc_mqprio_qopt *qopt = &mqprio->qopt;
+	struct net_device *ndev = priv->dev;
+	int num_stack_tx_queues = 0;
+	int num_tc = qopt->num_tc;
+	u16 offset, count;
+	int tc, err;
+
+	if (!num_tc) {
+		stmmac_reset_tc_mqprio(ndev, mqprio->extack);
+		return 0;
+	}
+
+	err = netdev_set_num_tc(ndev, num_tc);
+	if (err)
+		return err;
+
+	/* DWMAC CORE4+ can not programming TC:TXQ mapping to hardware.
+	 * Synopsys Databook:
+	 * "The number of Tx DMA channels is equal to the number of Tx queues,
+	 * and is direct one-to-one mapping."
+	 *
+	 * Luckily, DWXGMAC CORE can.
+	 *
+	 * Thus preemptible_tcs should be handled in a per core manner.
+	 */
+	for (tc = 0; tc < num_tc; tc++) {
+		offset = qopt->offset[tc];
+		count = qopt->count[tc];
+		num_stack_tx_queues += count;
+
+		err = netdev_set_tc_queue(ndev, tc, count, offset);
+		if (err)
+			goto err_reset_tc;
+	}
+
+	err = netif_set_real_num_tx_queues(ndev, num_stack_tx_queues);
+	if (err)
+		goto err_reset_tc;
+
+	err = stmmac_fpe_set_preemptible_tcs(priv, ndev, mqprio->extack,
+					     mqprio->preemptible_tcs);
+	if (err)
+		goto err_reset_tc;
+
+	return 0;
+
+err_reset_tc:
+	stmmac_reset_tc_mqprio(ndev, mqprio->extack);
+
+	return err;
+}
+
 const struct stmmac_tc_ops dwmac510_tc_ops = {
 	.init = tc_init,
 	.setup_cls_u32 = tc_setup_cls_u32,
@@ -1198,4 +1271,5 @@ const struct stmmac_tc_ops dwmac510_tc_ops = {
 	.setup_taprio = tc_setup_taprio,
 	.setup_etf = tc_setup_etf,
 	.query_caps = tc_query_caps,
+	.setup_mqprio = tc_setup_mqprio,
 };
-- 
2.34.1

[PATCH net-next v2 6/7] net: stmmac: support fp parameter of tc-taprio

[Furong Xu]

tc-taprio can select whether traffic classes are express or preemptible.

0) tc qdisc add dev eth1 parent root handle 100 taprio \
        num_tc 4 \
        map 0 1 2 3 2 2 2 2 2 2 2 2 2 2 2 3 \
        queues 1@0 1@1 1@2 1@3 \
        base-time 1000000000 \
        sched-entry S 03 10000000 \
        sched-entry S 0e 10000000 \
        flags 0x2 fp P E E E

1) After some traffic tests, MAC merge layer statistics are all good.

Local device:
[ {
        "ifname": "eth1",
        "pmac-enabled": true,
        "tx-enabled": true,
        "tx-active": true,
        "tx-min-frag-size": 60,
        "rx-min-frag-size": 60,
        "verify-enabled": true,
        "verify-time": 100,
        "max-verify-time": 128,
        "verify-status": "SUCCEEDED",
        "statistics": {
            "MACMergeFrameAssErrorCount": 0,
            "MACMergeFrameSmdErrorCount": 0,
            "MACMergeFrameAssOkCount": 0,
            "MACMergeFragCountRx": 0,
            "MACMergeFragCountTx": 17837,
            "MACMergeHoldCount": 18639
        }
    } ]

Remote device:
[ {
        "ifname": "end1",
        "pmac-enabled": true,
        "tx-enabled": true,
        "tx-active": true,
        "tx-min-frag-size": 60,
        "rx-min-frag-size": 60,
        "verify-enabled": true,
        "verify-time": 100,
        "max-verify-time": 128,
        "verify-status": "SUCCEEDED",
        "statistics": {
            "MACMergeFrameAssErrorCount": 0,
            "MACMergeFrameSmdErrorCount": 0,
            "MACMergeFrameAssOkCount": 17189,
            "MACMergeFragCountRx": 17837,
            "MACMergeFragCountTx": 0,
            "MACMergeHoldCount": 0
        }
    } ]

Tested on DWMAC CORE 5.10a

Signed-off-by: Furong Xu <0x1207@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index a967c6f01e4e..05b870b35947 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -933,7 +933,6 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 	u32 size, wid = priv->dma_cap.estwid, dep = priv->dma_cap.estdep;
 	struct timespec64 time, current_time, qopt_time;
 	ktime_t current_time_ns;
-	bool fpe = false;
 	int i, ret = 0;
 	u64 ctr;
 
@@ -1018,16 +1017,12 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 
 		switch (qopt->entries[i].command) {
 		case TC_TAPRIO_CMD_SET_GATES:
-			if (fpe)
-				return -EINVAL;
 			break;
 		case TC_TAPRIO_CMD_SET_AND_HOLD:
 			gates |= BIT(0);
-			fpe = true;
 			break;
 		case TC_TAPRIO_CMD_SET_AND_RELEASE:
 			gates &= ~BIT(0);
-			fpe = true;
 			break;
 		default:
 			return -EOPNOTSUPP;
@@ -1058,7 +1053,7 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 
 	tc_taprio_map_maxsdu_txq(priv, qopt);
 
-	if (fpe && !priv->dma_cap.fpesel) {
+	if (qopt->mqprio.preemptible_tcs && !priv->dma_cap.fpesel) {
 		mutex_unlock(&priv->est_lock);
 		return -EOPNOTSUPP;
 	}
@@ -1071,6 +1066,9 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 		goto disable;
 	}
 
+	stmmac_fpe_set_preemptible_tcs(priv, priv->dev, qopt->mqprio.extack,
+				       qopt->mqprio.preemptible_tcs);
+
 	netdev_info(priv->dev, "configured EST\n");
 
 	return 0;
@@ -1089,11 +1087,8 @@ static int tc_taprio_configure(struct stmmac_priv *priv,
 		mutex_unlock(&priv->est_lock);
 	}
 
-	stmmac_fpe_configure(priv, priv->ioaddr,
-			     &priv->fpe_cfg,
-			     priv->plat->tx_queues_to_use,
-			     priv->plat->rx_queues_to_use,
-			     false, false);
+	stmmac_fpe_set_preemptible_tcs(priv, priv->dev, qopt->mqprio.extack, 0);
+
 	netdev_info(priv->dev, "disabled FPE\n");
 
 	return ret;
-- 
2.34.1

[PATCH net-next v2 7/7] net: stmmac: silence FPE kernel logs

[Furong Xu]

ethtool --show-mm can get real-time state of FPE.
Those kernel logs should keep quiet.

Signed-off-by: Furong Xu <0x1207@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
index b6114de34b31..733163c52f97 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c
@@ -620,22 +620,22 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
 
 	if (value & TRSP) {
 		status |= FPE_EVENT_TRSP;
-		netdev_info(dev, "FPE: Respond mPacket is transmitted\n");
+		netdev_dbg(dev, "FPE: Respond mPacket is transmitted\n");
 	}
 
 	if (value & TVER) {
 		status |= FPE_EVENT_TVER;
-		netdev_info(dev, "FPE: Verify mPacket is transmitted\n");
+		netdev_dbg(dev, "FPE: Verify mPacket is transmitted\n");
 	}
 
 	if (value & RRSP) {
 		status |= FPE_EVENT_RRSP;
-		netdev_info(dev, "FPE: Respond mPacket is received\n");
+		netdev_dbg(dev, "FPE: Respond mPacket is received\n");
 	}
 
 	if (value & RVER) {
 		status |= FPE_EVENT_RVER;
-		netdev_info(dev, "FPE: Verify mPacket is received\n");
+		netdev_dbg(dev, "FPE: Verify mPacket is received\n");
 	}
 
 	return status;
-- 
2.34.1

Re: [PATCH net-next v2 0/7] net: stmmac: FPE via ethtool + tc

[Vladimir Oltean]

On Tue, Aug 13, 2024 at 07:47:26PM +0800, Furong Xu wrote:
> Move the Frame Preemption(FPE) over to the new standard API which uses
> ethtool-mm/tc-mqprio/tc-taprio.
> 
> Changes in v2:
>   1. refactor FPE verification processe
>   2. suspend/resume and kselftest-ethtool_mm, all test cases passed
>   3. handle TC:TXQ remapping for DWMAC CORE4+

This is starting to look better and better. I wouldn't be sad if it was
merged like this, but the locking still looks a little bit wacky to me,
and it's not 100% clear what priv->mm_lock protects and what it doesn't.

I can make a breakdown of how each member of fpe_cfg is used, and thus
understand exactly what are the locking needs and how they are addressed
in this version, but most likely not today.