From: Gur Stavi <gur.stavi@huawei.com>
To: Gur Stavi <gur.stavi@huawei.com>, gongfan <gongfan1@huawei.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
Andrew Lunn <andrew+netdev@lunn.ch>, <linux-doc@vger.kernel.org>,
Jonathan Corbet <corbet@lwn.net>,
Bjorn Helgaas <helgaas@kernel.org>,
Cai Huoqing <cai.huoqing@linux.dev>,
Xin Guo <guoxin09@huawei.com>,
Shen Chenyang <shenchenyang1@hisilicon.com>,
Zhou Shuai <zhoushuai28@huawei.com>, Wu Like <wulike1@huawei.com>,
Shi Jing <shijing34@huawei.com>,
Meny Yossefi <meny.yossefi@huawei.com>
Subject: [PATCH net-next v01 0/1] net: hinic3: Add a driver for Huawei 3rd gen NIC
Date: Thu, 19 Dec 2024 11:21:54 +0200 [thread overview]
Message-ID: <cover.1734599672.git.gur.stavi@huawei.com> (raw)
This is the 1/3 patch of the patch-set described below.
The patch-set contains driver for Huawei's 3rd generation HiNIC
Ethernet device that will be available in the future.
This is an SRIOV device, designed for data centers.
Initially, the driver only supports VFs.
Following the discussion over RFC01, the code will be submitted in
separate smaller patches where until the last patch the driver is
non-functional. The RFC02 submission contains overall view of the entire
driver but every patch will be posted as a standalone submission.
Changes:
RFC V01: https://lore.kernel.org/netdev/cover.1730290527.git.gur.stavi@huawei.com
RFC V02: https://lore.kernel.org/netdev/cover.1733990727.git.gur.stavi@huawei.com
* Reduce overall line of code by removing optional functionality.
* Break down into smaller patches.
PATCH 01 V01:
* Documentation style and consistency fixes (from Bjorn Helgaas)
* Use ipoll instead of custom code (from Andrew Lunn)
* Move dev_set_drvdata up in initialization order (from Andrew Lunn)
* Use netdev's max_mtu, min_mtu (from Andrew Lunn)
* Fix variable 'xxx' set but not used warnings (from Linux patchwork)
gongfan (1):
hinic3: module initialization and tx/rx logic
.../device_drivers/ethernet/huawei/hinic3.rst | 137 ++++
MAINTAINERS | 7 +
drivers/net/ethernet/huawei/Kconfig | 1 +
drivers/net/ethernet/huawei/Makefile | 1 +
drivers/net/ethernet/huawei/hinic3/Kconfig | 16 +
drivers/net/ethernet/huawei/hinic3/Makefile | 21 +
.../ethernet/huawei/hinic3/hinic3_common.c | 53 ++
.../ethernet/huawei/hinic3/hinic3_common.h | 27 +
.../ethernet/huawei/hinic3/hinic3_hw_cfg.c | 30 +
.../ethernet/huawei/hinic3/hinic3_hw_cfg.h | 58 ++
.../ethernet/huawei/hinic3/hinic3_hw_comm.c | 37 +
.../ethernet/huawei/hinic3/hinic3_hw_comm.h | 13 +
.../ethernet/huawei/hinic3/hinic3_hw_intf.h | 85 +++
.../net/ethernet/huawei/hinic3/hinic3_hwdev.c | 24 +
.../net/ethernet/huawei/hinic3/hinic3_hwdev.h | 82 +++
.../net/ethernet/huawei/hinic3/hinic3_hwif.c | 15 +
.../net/ethernet/huawei/hinic3/hinic3_hwif.h | 50 ++
.../net/ethernet/huawei/hinic3/hinic3_lld.c | 410 +++++++++++
.../net/ethernet/huawei/hinic3/hinic3_lld.h | 20 +
.../net/ethernet/huawei/hinic3/hinic3_main.c | 415 +++++++++++
.../net/ethernet/huawei/hinic3/hinic3_mbox.c | 17 +
.../net/ethernet/huawei/hinic3/hinic3_mbox.h | 16 +
.../net/ethernet/huawei/hinic3/hinic3_mgmt.h | 13 +
.../huawei/hinic3/hinic3_mgmt_interface.h | 111 +++
.../huawei/hinic3/hinic3_netdev_ops.c | 77 ++
.../ethernet/huawei/hinic3/hinic3_nic_cfg.c | 254 +++++++
.../ethernet/huawei/hinic3/hinic3_nic_cfg.h | 45 ++
.../ethernet/huawei/hinic3/hinic3_nic_dev.h | 100 +++
.../ethernet/huawei/hinic3/hinic3_nic_io.c | 21 +
.../ethernet/huawei/hinic3/hinic3_nic_io.h | 117 +++
.../huawei/hinic3/hinic3_queue_common.c | 65 ++
.../huawei/hinic3/hinic3_queue_common.h | 51 ++
.../net/ethernet/huawei/hinic3/hinic3_rss.c | 24 +
.../net/ethernet/huawei/hinic3/hinic3_rss.h | 12 +
.../net/ethernet/huawei/hinic3/hinic3_rx.c | 401 ++++++++++
.../net/ethernet/huawei/hinic3/hinic3_rx.h | 91 +++
.../net/ethernet/huawei/hinic3/hinic3_tx.c | 691 ++++++++++++++++++
.../net/ethernet/huawei/hinic3/hinic3_tx.h | 129 ++++
.../net/ethernet/huawei/hinic3/hinic3_wq.c | 29 +
.../net/ethernet/huawei/hinic3/hinic3_wq.h | 75 ++
40 files changed, 3841 insertions(+)
create mode 100644 Documentation/networking/device_drivers/ethernet/huawei/hinic3.rst
create mode 100644 drivers/net/ethernet/huawei/hinic3/Kconfig
create mode 100644 drivers/net/ethernet/huawei/hinic3/Makefile
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_common.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_common.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_cfg.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_cfg.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_comm.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_comm.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_intf.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwdev.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwdev.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwif.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwif.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_lld.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_lld.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_main.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mbox.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mbox.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mgmt.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mgmt_interface.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_netdev_ops.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_cfg.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_cfg.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_dev.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_io.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_io.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_queue_common.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_queue_common.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rss.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rss.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rx.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rx.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_tx.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_tx.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_wq.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_wq.h
base-commit: 65fb414c93f486cef5408951350f20552113abd0
--
2.45.2
next reply other threads:[~2024-12-19 9:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-19 9:21 Gur Stavi [this message]
2024-12-19 9:21 ` [PATCH net-next v01 1/1] hinic3: module initialization and tx/rx logic Gur Stavi
2024-12-20 21:24 ` Jakub Kicinski
2024-12-22 8:12 ` Gur Stavi
2024-12-23 15:39 ` Jakub Kicinski
2024-12-25 12:56 ` Gur Stavi
2024-12-27 18:31 ` Jakub Kicinski
2024-12-30 14:14 ` Gur Stavi
2024-12-31 3:23 ` Jakub Kicinski
2025-01-01 6:49 ` Gur Stavi
-- strict thread matches above, loose matches on Subject: below --
2025-06-10 14:30 [PATCH net-next v01 0/1] net: hinic3: Add a driver for Huawei 3rd gen NIC Fan Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1734599672.git.gur.stavi@huawei.com \
--to=gur.stavi@huawei.com \
--cc=andrew+netdev@lunn.ch \
--cc=cai.huoqing@linux.dev \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gongfan1@huawei.com \
--cc=guoxin09@huawei.com \
--cc=helgaas@kernel.org \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=meny.yossefi@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shenchenyang1@hisilicon.com \
--cc=shijing34@huawei.com \
--cc=wulike1@huawei.com \
--cc=zhoushuai28@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).