From: Gur Stavi <gur.stavi@huawei.com>
To: Gur Stavi <gur.stavi@huawei.com>, gongfan <gongfan1@huawei.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
Andrew Lunn <andrew+netdev@lunn.ch>, <linux-doc@vger.kernel.org>,
Jonathan Corbet <corbet@lwn.net>,
Bjorn Helgaas <helgaas@kernel.org>,
Cai Huoqing <cai.huoqing@linux.dev>,
Xin Guo <guoxin09@huawei.com>,
Shen Chenyang <shenchenyang1@hisilicon.com>,
Zhou Shuai <zhoushuai28@huawei.com>, Wu Like <wulike1@huawei.com>,
Shi Jing <shijing34@huawei.com>,
Meny Yossefi <meny.yossefi@huawei.com>
Subject: [PATCH net-next v03 0/1] net: hinic3: Add a driver for Huawei 3rd gen NIC
Date: Wed, 1 Jan 2025 15:04:30 +0200 [thread overview]
Message-ID: <cover.1735735608.git.gur.stavi@huawei.com> (raw)
This is the 1/3 patch of the patch-set described below.
The patch-set contains driver for Huawei's 3rd generation HiNIC
Ethernet device that will be available in the future.
This is an SRIOV device, designed for data centers.
Initially, the driver only supports VFs.
Following the discussion over RFC01, the code will be submitted in
separate smaller patches where until the last patch the driver is
non-functional. The RFC02 submission contains overall view of the entire
driver but every patch will be posted as a standalone submission.
Changes:
RFC V01: https://lore.kernel.org/netdev/cover.1730290527.git.gur.stavi@huawei.com
RFC V02: https://lore.kernel.org/netdev/cover.1733990727.git.gur.stavi@huawei.com
* Reduce overall line of code by removing optional functionality.
* Break down into smaller patches.
PATCH 01 V01: https://lore.kernel.org/netdev/cover.1734599672.git.gur.stavi@huawei.com
* Documentation style and consistency fixes (from Bjorn Helgaas)
* Use ipoll instead of custom code (from Andrew Lunn)
* Move dev_set_drvdata up in initialization order (from Andrew Lunn)
* Use netdev's max_mtu, min_mtu (from Andrew Lunn)
* Fix variable 'xxx' set but not used warnings (from Linux patchwork)
PATCH 01 V02: https://lore.kernel.org/netdev/cover.1735206602.git.gur.stavi@huawei.com
* Add comment regarding usage of random MAC. (Andrew Lunn)
* Add COMPILE_TEST to Kconfig (Jakub Kicinski)
PATCH 01 V03:
* Rephrase Kconfig comment (Jakub Kicinski)
* Kconfig: add 'select AUXILIARY_BUS' (Kernel test robot)
* ARCH=um: missing include 'net/ip6_checksum.h' (Kernel test robot)
gongfan (1):
hinic3: module initialization and tx/rx logic
.../device_drivers/ethernet/huawei/hinic3.rst | 137 ++++
MAINTAINERS | 7 +
drivers/net/ethernet/huawei/Kconfig | 1 +
drivers/net/ethernet/huawei/Makefile | 1 +
drivers/net/ethernet/huawei/hinic3/Kconfig | 18 +
drivers/net/ethernet/huawei/hinic3/Makefile | 21 +
.../ethernet/huawei/hinic3/hinic3_common.c | 53 ++
.../ethernet/huawei/hinic3/hinic3_common.h | 27 +
.../ethernet/huawei/hinic3/hinic3_hw_cfg.c | 30 +
.../ethernet/huawei/hinic3/hinic3_hw_cfg.h | 58 ++
.../ethernet/huawei/hinic3/hinic3_hw_comm.c | 37 +
.../ethernet/huawei/hinic3/hinic3_hw_comm.h | 13 +
.../ethernet/huawei/hinic3/hinic3_hw_intf.h | 85 +++
.../net/ethernet/huawei/hinic3/hinic3_hwdev.c | 24 +
.../net/ethernet/huawei/hinic3/hinic3_hwdev.h | 82 +++
.../net/ethernet/huawei/hinic3/hinic3_hwif.c | 15 +
.../net/ethernet/huawei/hinic3/hinic3_hwif.h | 50 ++
.../net/ethernet/huawei/hinic3/hinic3_lld.c | 410 +++++++++++
.../net/ethernet/huawei/hinic3/hinic3_lld.h | 20 +
.../net/ethernet/huawei/hinic3/hinic3_main.c | 421 +++++++++++
.../net/ethernet/huawei/hinic3/hinic3_mbox.c | 17 +
.../net/ethernet/huawei/hinic3/hinic3_mbox.h | 16 +
.../net/ethernet/huawei/hinic3/hinic3_mgmt.h | 13 +
.../huawei/hinic3/hinic3_mgmt_interface.h | 111 +++
.../huawei/hinic3/hinic3_netdev_ops.c | 77 ++
.../ethernet/huawei/hinic3/hinic3_nic_cfg.c | 254 +++++++
.../ethernet/huawei/hinic3/hinic3_nic_cfg.h | 45 ++
.../ethernet/huawei/hinic3/hinic3_nic_dev.h | 100 +++
.../ethernet/huawei/hinic3/hinic3_nic_io.c | 21 +
.../ethernet/huawei/hinic3/hinic3_nic_io.h | 117 +++
.../huawei/hinic3/hinic3_queue_common.c | 65 ++
.../huawei/hinic3/hinic3_queue_common.h | 51 ++
.../net/ethernet/huawei/hinic3/hinic3_rss.c | 24 +
.../net/ethernet/huawei/hinic3/hinic3_rss.h | 12 +
.../net/ethernet/huawei/hinic3/hinic3_rx.c | 401 ++++++++++
.../net/ethernet/huawei/hinic3/hinic3_rx.h | 91 +++
.../net/ethernet/huawei/hinic3/hinic3_tx.c | 692 ++++++++++++++++++
.../net/ethernet/huawei/hinic3/hinic3_tx.h | 129 ++++
.../net/ethernet/huawei/hinic3/hinic3_wq.c | 29 +
.../net/ethernet/huawei/hinic3/hinic3_wq.h | 75 ++
40 files changed, 3850 insertions(+)
create mode 100644 Documentation/networking/device_drivers/ethernet/huawei/hinic3.rst
create mode 100644 drivers/net/ethernet/huawei/hinic3/Kconfig
create mode 100644 drivers/net/ethernet/huawei/hinic3/Makefile
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_common.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_common.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_cfg.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_cfg.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_comm.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_comm.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw_intf.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwdev.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwdev.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwif.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hwif.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_lld.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_lld.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_main.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mbox.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mbox.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mgmt.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mgmt_interface.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_netdev_ops.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_cfg.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_cfg.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_dev.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_io.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_io.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_queue_common.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_queue_common.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rss.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rss.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rx.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rx.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_tx.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_tx.h
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_wq.c
create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_wq.h
base-commit: 9268abe611b09edc975aa27e6ce829f629352ff4
--
2.45.2
next reply other threads:[~2025-01-01 12:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-01 13:04 Gur Stavi [this message]
2025-01-01 13:04 ` [PATCH net-next v03 1/1] hinic3: module initialization and tx/rx logic Gur Stavi
2025-01-03 8:47 ` [EXTERNAL] " Suman Ghosh
2025-01-07 10:23 ` Gur Stavi
2025-01-07 10:37 ` Gur Stavi
2025-01-07 14:03 ` Gur Stavi
2025-01-08 5:51 ` Gur Stavi
2025-01-02 16:53 ` [PATCH net-next v03 0/1] net: hinic3: Add a driver for Huawei 3rd gen NIC Jakub Kicinski
2025-01-05 7:30 ` Gur Stavi
2025-01-05 16:32 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1735735608.git.gur.stavi@huawei.com \
--to=gur.stavi@huawei.com \
--cc=andrew+netdev@lunn.ch \
--cc=cai.huoqing@linux.dev \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gongfan1@huawei.com \
--cc=guoxin09@huawei.com \
--cc=helgaas@kernel.org \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=meny.yossefi@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shenchenyang1@hisilicon.com \
--cc=shijing34@huawei.com \
--cc=wulike1@huawei.com \
--cc=zhoushuai28@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).