From: "Chunfeng Yun (云春峰)" <Chunfeng.Yun@mediatek.com>
To: "angelogioacchino.delregno@collabora.com"
<angelogioacchino.delregno@collabora.com>,
"Sean Wang" <Sean.Wang@mediatek.com>,
"Mark-MC Lee (李明昌)" <Mark-MC.Lee@mediatek.com>,
"conor+dt@kernel.org" <conor+dt@kernel.org>,
"krzysztof.kozlowski+dt@linaro.org"
<krzysztof.kozlowski+dt@linaro.org>,
"lorenzo@kernel.org" <lorenzo@kernel.org>,
"nbd@nbd.name" <nbd@nbd.name>,
"linux@armlinux.org.uk" <linux@armlinux.org.uk>,
"hkallweit1@gmail.com" <hkallweit1@gmail.com>,
"lynxis@fe80.eu" <lynxis@fe80.eu>,
"dqfext@gmail.com" <dqfext@gmail.com>,
"matthias.bgg@gmail.com" <matthias.bgg@gmail.com>,
"Weijie Gao (高惟杰)" <Weijie.Gao@mediatek.com>,
"linux-mediatek@lists.infradead.org"
<linux-mediatek@lists.infradead.org>,
"kuba@kernel.org" <kuba@kernel.org>,
"p.zabel@pengutronix.de" <p.zabel@pengutronix.de>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"davem@davemloft.net" <davem@davemloft.net>,
"vkoul@kernel.org" <vkoul@kernel.org>,
"daniel@makrotopia.org" <daniel@makrotopia.org>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"pabeni@redhat.com" <pabeni@redhat.com>,
"SkyLake Huang (黃啟澤)" <SkyLake.Huang@mediatek.com>,
"linux-phy@lists.infradead.org" <linux-phy@lists.infradead.org>,
"kishon@kernel.org" <kishon@kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"edumazet@google.com" <edumazet@google.com>,
"john@phrozen.org" <john@phrozen.org>,
"andrew@lunn.ch" <andrew@lunn.ch>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [RFC PATCH net-next v3 2/8] phy: add driver for MediaTek pextp 10GE SerDes PHY
Date: Wed, 13 Dec 2023 02:13:10 +0000 [thread overview]
Message-ID: <d54e1438f6d18d0c3e9ad6493903a3434c7fcd3c.camel@mediatek.com> (raw)
In-Reply-To: <d5d0d01f-7df1-451a-a4bc-4c85f31b03db@collabora.com>
On Tue, 2023-12-12 at 11:41 +0100, AngeloGioacchino Del Regno wrote:
> Il 12/12/23 04:46, Daniel Golle ha scritto:
> > Add driver for MediaTek's pextp 10 Gigabit/s Ethernet SerDes PHY
> > which
> > can be found in the MT7988 SoC.
> >
> > The PHY can operates only in PHY_MODE_ETHERNET, the submode is one
> > of
> > PHY_INTERFACE_MODE_* corresponding to the supported modes:
> >
> > * USXGMII
> > * 10GBase-R
> > * 5GBase-R
> > * 2500Base-X
> > * 1000Base-X
> > * Cisco SGMII (MAC side)
> >
> > In order to work-around a performance issue present on the first of
> > two PEXTP present in MT7988 special tuning is applied which can be
> > selected by adding the mediatek,usxgmii-performance-errata property
> > to
> > the device tree node.
> >
> > There is no documentation what-so-ever for the pextp registers and
> > this driver is based on a GPL licensed implementation found in
> > MediaTek's SDK.
> >
> > Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> > ---
>
> ..snip..
>
> Can anyone from MediaTek **please** define those registers and
> fields?
I discussed with my software coworker who also don't have register map
doc, need our hardware designer help to provide the names of these
register and fields.
Thanks
>
> In this form, this driver is pretty obscure and nobody knows what
> it's doing;
> please remember that, by actually providing a definition for those
> registers and
> fields, the operation (reliability) of this PHY may be improved and
> this driver
> will be actually maintainable (and possibly support more than one
> variation of
> this PHY in the future with less efforts).
>
> MediaTek?
>
> Regards,
> Angelo
>
> > +
> > + /* Setup operation mode */
> > + if (is_10g)
> > + iowrite32(0x00c9071c, pextp->base + 0x9024);
> > + else
> > + iowrite32(0x00d9071c, pextp->base + 0x9024);
> > +
> > + if (is_5g)
> > + iowrite32(0xaaa5a5aa, pextp->base + 0x2020);
> > + else
> > + iowrite32(0xaa8585aa, pextp->base + 0x2020);
> > +
> > + if (is_2p5g || is_5g || is_10g) {
> > + iowrite32(0x0c020707, pextp->base + 0x2030);
> > + iowrite32(0x0e050f0f, pextp->base + 0x2034);
> > + iowrite32(0x00140032, pextp->base + 0x2040);
> > + } else {
> > + iowrite32(0x0c020207, pextp->base + 0x2030);
> > + iowrite32(0x0e05050f, pextp->base + 0x2034);
> > + iowrite32(0x00200032, pextp->base + 0x2040);
> > + }
> > +
> > + if (is_2p5g || is_10g)
> > + iowrite32(0x00c014aa, pextp->base + 0x50f0);
> > + else if (is_5g)
> > + iowrite32(0x00c018aa, pextp->base + 0x50f0);
> > + else
> > + iowrite32(0x00c014ba, pextp->base + 0x50f0);
> > +
> > + if (is_5g) {
> > + iowrite32(0x3777812b, pextp->base + 0x50e0);
> > + iowrite32(0x005c9cff, pextp->base + 0x506c);
> > + iowrite32(0x9dfafafa, pextp->base + 0x5070);
> > + iowrite32(0x273f3f3f, pextp->base + 0x5074);
> > + iowrite32(0xa8883868, pextp->base + 0x5078);
> > + iowrite32(0x14661466, pextp->base + 0x507c);
> > + } else {
> > + iowrite32(0x3777c12b, pextp->base + 0x50e0);
> > + iowrite32(0x005f9cff, pextp->base + 0x506c);
> > + iowrite32(0x9d9dfafa, pextp->base + 0x5070);
> > + iowrite32(0x27273f3f, pextp->base + 0x5074);
> > + iowrite32(0xa7883c68, pextp->base + 0x5078);
> > + iowrite32(0x11661166, pextp->base + 0x507c);
> > + }
> > +
> > + if (is_2p5g || is_10g) {
> > + iowrite32(0x0e000aaf, pextp->base + 0x5080);
> > + iowrite32(0x08080d0d, pextp->base + 0x5084);
> > + iowrite32(0x02030909, pextp->base + 0x5088);
> > + } else if (is_5g) {
> > + iowrite32(0x0e001abf, pextp->base + 0x5080);
> > + iowrite32(0x080b0d0d, pextp->base + 0x5084);
> > + iowrite32(0x02050909, pextp->base + 0x5088);
> > + } else {
> > + iowrite32(0x0e000eaf, pextp->base + 0x5080);
> > + iowrite32(0x08080e0d, pextp->base + 0x5084);
> > + iowrite32(0x02030b09, pextp->base + 0x5088);
> > + }
> > +
> > + if (is_5g) {
> > + iowrite32(0x0c000000, pextp->base + 0x50e4);
> > + iowrite32(0x04000000, pextp->base + 0x50e8);
> > + } else {
> > + iowrite32(0x0c0c0000, pextp->base + 0x50e4);
> > + iowrite32(0x04040000, pextp->base + 0x50e8);
> > + }
> > +
> > + if (is_2p5g || mtk_interface_mode_is_xgmii(interface))
> > + iowrite32(0x0f0f0c06, pextp->base + 0x50eC);
> > + else
> > + iowrite32(0x0f0f0606, pextp->base + 0x50eC);
> > +
> > + if (is_5g) {
> > + iowrite32(0x50808c8c, pextp->base + 0x50a8);
> > + iowrite32(0x18000000, pextp->base + 0x6004);
> > + } else {
> > + iowrite32(0x506e8c8c, pextp->base + 0x50a8);
> > + iowrite32(0x18190000, pextp->base + 0x6004);
> > + }
> > +
> > + if (is_10g)
> > + iowrite32(0x01423342, pextp->base + 0x00f8);
> > + else if (is_5g)
> > + iowrite32(0x00a132a1, pextp->base + 0x00f8);
> > + else if (is_2p5g)
> > + iowrite32(0x009c329c, pextp->base + 0x00f8);
> > + else
> > + iowrite32(0x00fa32fa, pextp->base + 0x00f8);
> > +
> > + /* Force SGDT_OUT off and select PCS */
> > + if (mtk_interface_mode_is_xgmii(interface))
> > + iowrite32(0x80201f20, pextp->base + 0x00f4);
> > + else
> > + iowrite32(0x80201f21, pextp->base + 0x00f4);
> > +
> > + /* Force GLB_CKDET_OUT */
> > + iowrite32(0x00050c00, pextp->base + 0x0030);
> > +
> > + /* Force AEQ on */
> > + iowrite32(0x02002800, pextp->base + 0x0070);
> > + ndelay(1020);
> > +
> > + /* Setup DA default value */
> > + iowrite32(0x00000020, pextp->base + 0x30b0);
> > + iowrite32(0x00008a01, pextp->base + 0x3028);
> > + iowrite32(0x0000a884, pextp->base + 0x302c);
> > + iowrite32(0x00083002, pextp->base + 0x3024);
> > + if (mtk_interface_mode_is_xgmii(interface)) {
> > + iowrite32(0x00022220, pextp->base + 0x3010);
> > + iowrite32(0x0f020a01, pextp->base + 0x5064);
> > + iowrite32(0x06100600, pextp->base + 0x50b4);
> > + if (interface == PHY_INTERFACE_MODE_USXGMII)
> > + iowrite32(0x40704000, pextp->base + 0x3048);
> > + else
> > + iowrite32(0x47684100, pextp->base + 0x3048);
> > + } else {
> > + iowrite32(0x00011110, pextp->base + 0x3010);
> > + iowrite32(0x40704000, pextp->base + 0x3048);
> > + }
> > +
> > + if (!mtk_interface_mode_is_xgmii(interface) && !is_2p5g)
> > + iowrite32(0x0000c000, pextp->base + 0x3064);
> > +
> > + if (interface != PHY_INTERFACE_MODE_10GBASER) {
> > + iowrite32(0xa8000000, pextp->base + 0x3050);
> > + iowrite32(0x000000aa, pextp->base + 0x3054);
> > + } else {
> > + iowrite32(0x00000000, pextp->base + 0x3050);
> > + iowrite32(0x00000000, pextp->base + 0x3054);
> > + }
> > +
> > + if (mtk_interface_mode_is_xgmii(interface))
> > + iowrite32(0x00000f00, pextp->base + 0x306c);
> > + else if (is_2p5g)
> > + iowrite32(0x22000f00, pextp->base + 0x306c);
> > + else
> > + iowrite32(0x20200f00, pextp->base + 0x306c);
> > +
> > + if (interface == PHY_INTERFACE_MODE_10GBASER && pextp->da_war)
> > + iowrite32(0x0007b400, pextp->base + 0xa008);
> > +
> > + if (mtk_interface_mode_is_xgmii(interface))
> > + iowrite32(0x00040000, pextp->base + 0xa060);
> > + else
> > + iowrite32(0x00050000, pextp->base + 0xa060);
> > +
> > + if (is_10g)
> > + iowrite32(0x00000001, pextp->base + 0x90d0);
> > + else if (is_5g)
> > + iowrite32(0x00000003, pextp->base + 0x90d0);
> > + else if (is_2p5g)
> > + iowrite32(0x00000005, pextp->base + 0x90d0);
> > + else
> > + iowrite32(0x00000007, pextp->base + 0x90d0);
> > +
> > + /* Release reset */
> > + iowrite32(0x0200e800, pextp->base + 0x0070);
> > + usleep_range(150, 500);
> > +
> > + /* Switch to P0 */
> > + iowrite32(0x0200c111, pextp->base + 0x0070);
> > + ndelay(1020);
> > + iowrite32(0x0200c101, pextp->base + 0x0070);
> > + usleep_range(15, 50);
> > +
> > + if (mtk_interface_mode_is_xgmii(interface)) {
> > + /* Switch to Gen3 */
> > + iowrite32(0x0202c111, pextp->base + 0x0070);
> > + } else {
> > + /* Switch to Gen2 */
> > + iowrite32(0x0201c111, pextp->base + 0x0070);
> > + }
> > + ndelay(1020);
> > + if (mtk_interface_mode_is_xgmii(interface))
> > + iowrite32(0x0202c101, pextp->base + 0x0070);
> > + else
> > + iowrite32(0x0201c101, pextp->base + 0x0070);
> > + usleep_range(100, 500);
> > + iowrite32(0x00000030, pextp->base + 0x30b0);
> > + if (mtk_interface_mode_is_xgmii(interface))
> > + iowrite32(0x80201f00, pextp->base + 0x00f4);
> > + else
> > + iowrite32(0x80201f01, pextp->base + 0x00f4);
> > +
> > + iowrite32(0x30000000, pextp->base + 0x3040);
> > + usleep_range(400, 1000);
> > +}
> > +
> > +static int mtk_pextp_set_mode(struct phy *phy, enum phy_mode mode,
> > int submode)
> > +{
> > + struct mtk_pextp_phy *pextp = phy_get_drvdata(phy);
> > +
> > + if (mode != PHY_MODE_ETHERNET)
> > + return -EINVAL;
> > +
> > + switch (submode) {
> > + case PHY_INTERFACE_MODE_1000BASEX:
> > + case PHY_INTERFACE_MODE_2500BASEX:
> > + case PHY_INTERFACE_MODE_SGMII:
> > + case PHY_INTERFACE_MODE_5GBASER:
> > + case PHY_INTERFACE_MODE_10GBASER:
> > + case PHY_INTERFACE_MODE_USXGMII:
> > + mtk_pextp_setup(pextp, submode);
> > + return 0;
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > +static int mtk_pextp_reset(struct phy *phy)
> > +{
> > + struct mtk_pextp_phy *pextp = phy_get_drvdata(phy);
> > +
> > + reset_control_assert(pextp->reset);
> > + usleep_range(100, 500);
> > + reset_control_deassert(pextp->reset);
> > + usleep_range(1, 10);
> > +
> > + return 0;
> > +}
> > +
> > +static int mtk_pextp_power_on(struct phy *phy)
> > +{
> > + struct mtk_pextp_phy *pextp = phy_get_drvdata(phy);
> > +
> > + return clk_bulk_prepare_enable(MTK_PEXTP_NUM_CLOCKS, pextp-
> > >clocks);
> > +}
> > +
> > +static int mtk_pextp_power_off(struct phy *phy)
> > +{
> > + struct mtk_pextp_phy *pextp = phy_get_drvdata(phy);
> > +
> > + clk_bulk_disable_unprepare(MTK_PEXTP_NUM_CLOCKS, pextp-
> > >clocks);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct phy_ops mtk_pextp_ops = {
> > + .power_on = mtk_pextp_power_on,
> > + .power_off = mtk_pextp_power_off,
> > + .set_mode = mtk_pextp_set_mode,
> > + .reset = mtk_pextp_reset,
> > + .owner = THIS_MODULE,
> > +};
> > +
> > +static int mtk_pextp_probe(struct platform_device *pdev)
> > +{
> > + struct device_node *np = pdev->dev.of_node;
> > + struct phy_provider *phy_provider;
> > + struct mtk_pextp_phy *pextp;
> > + struct phy *phy;
> > +
> > + if (!np)
> > + return -ENODEV;
> > +
> > + pextp = devm_kzalloc(&pdev->dev, sizeof(*pextp), GFP_KERNEL);
> > + if (!pextp)
> > + return -ENOMEM;
> > +
> > + pextp->base = devm_of_iomap(&pdev->dev, np, 0, NULL);
> > + if (!pextp->base)
> > + return -EIO;
> > +
> > + pextp->dev = &pdev->dev;
> > +
> > + pextp->clocks[0].id = "topxtal";
> > + pextp->clocks[0].clk = devm_clk_get(&pdev->dev, pextp-
> > >clocks[0].id);
> > + if (IS_ERR(pextp->clocks[0].clk))
> > + return PTR_ERR(pextp->clocks[0].clk);
> > +
> > + pextp->clocks[1].id = "xfipll";
> > + pextp->clocks[1].clk = devm_clk_get(&pdev->dev, pextp-
> > >clocks[1].id);
> > + if (IS_ERR(pextp->clocks[1].clk))
> > + return PTR_ERR(pextp->clocks[1].clk);
> > +
> > + pextp->reset = devm_reset_control_get_exclusive(&pdev->dev,
> > NULL);
> > + if (IS_ERR(pextp->reset))
> > + return PTR_ERR(pextp->reset);
> > +
> > + pextp->da_war = of_property_read_bool(np, "mediatek,usxgmii-
> > performance-errata");
> > +
> > + phy = devm_phy_create(&pdev->dev, NULL, &mtk_pextp_ops);
> > + if (IS_ERR(phy))
> > + return PTR_ERR(phy);
> > +
> > + phy_set_drvdata(phy, pextp);
> > +
> > + phy_provider = devm_of_phy_provider_register(&pdev->dev,
> > of_phy_simple_xlate);
> > +
> > + return PTR_ERR_OR_ZERO(phy_provider);
> > +}
> > +
> > +static const struct of_device_id mtk_pextp_match[] = {
> > + { .compatible = "mediatek,mt7988-xfi-pextp", },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, mtk_pextp_match);
> > +
> > +static struct platform_driver mtk_pextp_driver = {
> > + .probe = mtk_pextp_probe,
> > + .driver = {
> > + .name = "mtk-pextp",
> > + .of_match_table = mtk_pextp_match,
> > + },
> > +};
> > +module_platform_driver(mtk_pextp_driver);
> > +
> > +MODULE_DESCRIPTION("MediaTek pextp SerDes PHY driver");
> > +MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
> > +MODULE_LICENSE("GPL");
>
>
next prev parent reply other threads:[~2023-12-13 2:16 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-12 3:45 [RFC PATCH net-next v3 0/8] Add support for 10G Ethernet SerDes on MT7988 Daniel Golle
2023-12-12 3:46 ` [RFC PATCH net-next v3 1/8] dt-bindings: phy: mediatek,xfi-pextp: add new bindings Daniel Golle
2023-12-12 5:43 ` Rob Herring
2023-12-12 16:21 ` Conor Dooley
2023-12-12 16:42 ` Daniel Golle
2023-12-13 9:46 ` Conor Dooley
2023-12-13 13:20 ` Andrew Lunn
2023-12-16 1:16 ` Daniel Golle
2023-12-12 3:46 ` [RFC PATCH net-next v3 2/8] phy: add driver for MediaTek pextp 10GE SerDes PHY Daniel Golle
2023-12-12 10:41 ` AngeloGioacchino Del Regno
2023-12-13 2:13 ` Chunfeng Yun (云春峰) [this message]
2023-12-21 16:48 ` Vinod Koul
2023-12-12 3:47 ` [RFC PATCH net-next v3 3/8] net: pcs: pcs-mtk-lynxi: add platform driver for MT7988 Daniel Golle
2023-12-13 16:04 ` Russell King (Oracle)
2024-02-07 1:29 ` Daniel Golle
2024-04-22 16:23 ` Daniel Golle
2024-07-10 11:17 ` Frank Wunderlich
2024-10-04 14:17 ` Aw: " Frank Wunderlich
2024-10-04 14:35 ` Russell King (Oracle)
2025-01-05 11:29 ` Aw: " Frank Wunderlich
2023-12-12 3:47 ` [RFC PATCH net-next v3 4/8] dt-bindings: net: pcs: add bindings for MediaTek USXGMII PCS Daniel Golle
2023-12-12 5:43 ` Rob Herring
2023-12-12 16:24 ` Conor Dooley
2023-12-12 3:47 ` [RFC PATCH net-next v3 5/8] net: pcs: add driver " Daniel Golle
2023-12-12 9:29 ` Simon Horman
2023-12-12 3:48 ` [RFC PATCH net-next v3 6/8] dt-bindings: net: mediatek: remove wrongly added clocks and SerDes Daniel Golle
2023-12-12 5:43 ` Rob Herring
2023-12-12 16:29 ` Conor Dooley
2023-12-12 3:51 ` [RFC PATCH net-next v3 7/8] dt-bindings: net: mediatek,net: fix and complete mt7988-eth binding Daniel Golle
2023-12-12 5:43 ` Rob Herring
2023-12-12 16:34 ` Conor Dooley
2023-12-13 6:58 ` Krzysztof Kozlowski
2023-12-12 3:51 ` [RFC PATCH net-next v3 8/8] net: ethernet: mtk_eth_soc: add paths and SerDes modes for MT7988 Daniel Golle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d54e1438f6d18d0c3e9ad6493903a3434c7fcd3c.camel@mediatek.com \
--to=chunfeng.yun@mediatek.com \
--cc=Mark-MC.Lee@mediatek.com \
--cc=Sean.Wang@mediatek.com \
--cc=SkyLake.Huang@mediatek.com \
--cc=Weijie.Gao@mediatek.com \
--cc=andrew@lunn.ch \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=daniel@makrotopia.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dqfext@gmail.com \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=john@phrozen.org \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=lorenzo@kernel.org \
--cc=lynxis@fe80.eu \
--cc=matthias.bgg@gmail.com \
--cc=nbd@nbd.name \
--cc=netdev@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).