From: <Arun.Ramadoss@microchip.com>
To: <olteanv@gmail.com>, <UNGLinuxDriver@microchip.com>,
<vivien.didelot@gmail.com>, <andrew@lunn.ch>,
<f.fainelli@gmail.com>, <kuba@kernel.org>, <wei.fang@nxp.com>,
<edumazet@google.com>, <pabeni@redhat.com>,
<o.rempel@pengutronix.de>, <Woojung.Huh@microchip.com>,
<davem@davemloft.net>, <hkallweit1@gmail.com>
Cc: <linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>,
<intel-wired-lan@lists.osuosl.org>, <kernel@pengutronix.de>
Subject: Re: [PATCH net-next v5 05/23] net: phy: add genphy_c45_ethtool_get/set_eee() support
Date: Mon, 6 Feb 2023 14:54:13 +0000 [thread overview]
Message-ID: <da3509e4602e28a1cc0d14cfce72db68808f5947.camel@microchip.com> (raw)
In-Reply-To: <20230206135050.3237952-6-o.rempel@pengutronix.de>
Hi Oleksij,
On Mon, 2023-02-06 at 14:50 +0100, Oleksij Rempel wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
>
>
> ---
> drivers/net/phy/phy-c45.c | 235
> ++++++++++++++++++++++++++++++++++++++
> include/linux/mdio.h | 58 ++++++++++
> include/linux/phy.h | 7 ++
> include/uapi/linux/mdio.h | 8 ++
> 4 files changed, 308 insertions(+)
>
> diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
> index 3ae642d3ae14..38361df1e669 100644
> --- a/drivers/net/phy/phy-c45.c
> +++ b/drivers/net/phy/phy-c45.c
> @@ -661,6 +661,129 @@ int genphy_c45_read_mdix(struct phy_device
> *phydev)
> }
> EXPORT_SYMBOL_GPL(genphy_c45_read_mdix);
>
>
> /**
> * genphy_c45_read_eee_cap1 - read supported EEE link modes from
> register 3.20
> * @phydev: target phy_device struct
> @@ -1194,6 +1317,118 @@ int genphy_c45_plca_get_status(struct
> phy_device *phydev,
> }
> EXPORT_SYMBOL_GPL(genphy_c45_plca_get_status);
>
> +/**
> + * genphy_c45_eee_is_active - get EEE supported and status
> + * @phydev: target phy_device struct
> + * @data: ethtool_eee data
Does the comment need to update based on the function parameter.
> + *
> + * Description: it reports the possible state of EEE functionality.
> + */
> +int genphy_c45_eee_is_active(struct phy_device *phydev, unsigned
> long *adv,
> + unsigned long *lp, bool *is_enabled)
> +{
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_adv) = {};
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_lp) = {};
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(common);
> + bool eee_enabled, eee_active;
> + int ret;
> +
> + ret = genphy_c45_read_eee_adv(phydev, tmp_adv);
> + if (ret)
> + return ret;
> +
> + ret = genphy_c45_read_eee_lpa(phydev, tmp_lp);
> + if (ret)
> + return ret;
> +
> + eee_enabled = !linkmode_empty(tmp_adv);
> + linkmode_and(common, tmp_adv, tmp_lp);
> + if (eee_enabled && !linkmode_empty(common))
> + eee_active = phy_check_valid(phydev->speed, phydev-
> >duplex,
> + common);
> + else
> + eee_active = false;
> +
> + if (adv)
> + linkmode_copy(adv, tmp_adv);
> + if (lp)
> + linkmode_copy(lp, tmp_lp);
> + if (is_enabled)
> + *is_enabled = eee_enabled;
> +
> + return eee_active;
> +}
> +EXPORT_SYMBOL(genphy_c45_eee_is_active);
> +
>
>
> --
> 2.30.2
>
next prev parent reply other threads:[~2023-02-06 14:54 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-06 13:50 [PATCH net-next v5 00/23] net: add EEE support for KSZ9477 and AR8035 with i.MX6 Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 01/23] net: dsa: microchip: enable EEE support Oleksij Rempel
2023-02-07 0:44 ` Andrew Lunn
2023-02-06 13:50 ` [PATCH net-next v5 02/23] net: phy: add genphy_c45_read_eee_abilities() function Oleksij Rempel
2023-02-06 14:46 ` Arun.Ramadoss
2023-02-07 0:44 ` Andrew Lunn
2023-02-08 5:19 ` Jakub Kicinski
2023-02-06 13:50 ` [PATCH net-next v5 03/23] net: phy: micrel: add ksz9477_get_features() Oleksij Rempel
2023-02-07 0:45 ` Andrew Lunn
2023-02-06 13:50 ` [PATCH net-next v5 04/23] net: phy: export phy_check_valid() function Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 05/23] net: phy: add genphy_c45_ethtool_get/set_eee() support Oleksij Rempel
2023-02-06 14:54 ` Arun.Ramadoss [this message]
2023-02-06 13:50 ` [PATCH net-next v5 06/23] net: phy: c22: migrate to genphy_c45_write_eee_adv() Oleksij Rempel
2023-02-07 0:52 ` Andrew Lunn
2023-02-06 13:50 ` [PATCH net-next v5 07/23] net: phy: c45: " Oleksij Rempel
2023-02-07 0:52 ` Andrew Lunn
2023-02-06 13:50 ` [PATCH net-next v5 08/23] net: phy: migrate phy_init_eee() to genphy_c45_eee_is_active() Oleksij Rempel
2023-02-07 0:54 ` Andrew Lunn
2023-02-06 13:50 ` [PATCH net-next v5 09/23] net: phy: start using genphy_c45_ethtool_get/set_eee() Oleksij Rempel
2023-02-07 1:05 ` Andrew Lunn
2023-02-06 13:50 ` [PATCH net-next v5 10/23] net: phy: add driver specific get/set_eee support Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 11/23] net: phy: at803x: implement ethtool access to SmartEEE functionality Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 12/23] net: phy: at803x: ar8035: fix EEE support for half duplex links Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 13/23] net: phy: add PHY specifica flag to signal SmartEEE support Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 14/23] net: phy: at803x: add PHY_SMART_EEE flag to AR8035 Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 15/23] net: phy: add phy_has_smarteee() helper Oleksij Rempel
2023-02-08 5:20 ` Jakub Kicinski
2023-02-06 13:50 ` [PATCH net-next v5 16/23] net: fec: add support for PHYs with SmartEEE support Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 17/23] e1000e: replace EEE ethtool helpers to linkmode variants Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 18/23] igb: " Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 19/23] igc: " Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 20/23] tg3: " Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 21/23] r8152: " Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 22/23] net: usb: ax88179_178a: " Oleksij Rempel
2023-02-06 13:50 ` [PATCH net-next v5 23/23] net: mdio: drop EEE ethtool helpers in favor " Oleksij Rempel
2023-02-08 5:25 ` [PATCH net-next v5 00/23] net: add EEE support for KSZ9477 and AR8035 with i.MX6 Jakub Kicinski
2023-02-08 8:30 ` Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=da3509e4602e28a1cc0d14cfce72db68808f5947.camel@microchip.com \
--to=arun.ramadoss@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=Woojung.Huh@microchip.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
--cc=wei.fang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).