[PATCH net-next] r8169: align setting PME with vendor driver

[Heiner Kallweit <hkallweit1@gmail.com>]

Align setting PME with the vendor driver. PMEnable is writable on
RTL8169 only, on later chip versions it's read-only. PME_SIGNAL is
used on chip versions from RTL8168evl with the exception of the
RTL8168f family.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/ethernet/realtek/r8169_main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index e1e1c89fb..5c337234b 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -1414,18 +1414,22 @@ static void __rtl8169_set_wol(struct rtl8169_private *tp, u32 wolopts)
 	}
 
 	switch (tp->mac_version) {
-	case RTL_GIGA_MAC_VER_02 ... RTL_GIGA_MAC_VER_17:
+	case RTL_GIGA_MAC_VER_02 ... RTL_GIGA_MAC_VER_06:
 		options = RTL_R8(tp, Config1) & ~PMEnable;
 		if (wolopts)
 			options |= PMEnable;
 		RTL_W8(tp, Config1, options);
 		break;
-	default:
+	case RTL_GIGA_MAC_VER_34:
+	case RTL_GIGA_MAC_VER_37:
+	case RTL_GIGA_MAC_VER_39 ... RTL_GIGA_MAC_VER_51:
 		options = RTL_R8(tp, Config2) & ~PME_SIGNAL;
 		if (wolopts)
 			options |= PME_SIGNAL;
 		RTL_W8(tp, Config2, options);
 		break;
+	default:
+		break;
 	}
 
 	rtl_lock_config_regs(tp);
-- 
2.22.0