Re: [Intel-wired-lan] [PATCH iwl-next v2 2/2] igc: enable build_skb on the non-XDP small-frame RX path

["Dahan, AvigailX" <avigailx.dahan@intel.com>]

On 17/03/2026 8:21, Kohei Enju wrote:
> igc implements igc_build_skb(), but it is currently unused because the
> IGC_RING_FLAG_RX_BUILD_SKB_ENABLED bit is never set. Enable the
> build_skb path when XDP is not active and the configured maximum frame
> size fits within IGC_MAX_FRAME_BUILD_SKB.
> 
> In a single-queue small-packet (64-byte) RX microbenchmark on my setup,
> enabling build_skb improved the receive rate from about 3.11 Mpps to
> about 3.30 Mpps, while reducing missed packets from about 484 kpps to
> about 300 kpps.
> 
> Keep the XDP path unchanged for now, since it uses a different RX buffer
> layout based on XDP_PACKET_HEADROOM, and enabling it there would need
> separate validation and buffer layout adjustments.
> 
> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
> Signed-off-by: Kohei Enju <kohei@enjuk.jp>
> ---
>   drivers/net/ethernet/intel/igc/igc.h      | 4 ++++
>   drivers/net/ethernet/intel/igc/igc_main.c | 4 ++++
>   2 files changed, 8 insertions(+)
> 

Tested-by: Avigail Dahan <avigailx.dahan@intel.com>