[PATCH AUTOSEL 5.11 05/38] bpf, x86: Use kvmalloc_array instead kmalloc_array in bpf_jit_comp

[PATCH AUTOSEL 5.11 05/38] bpf, x86: Use kvmalloc_array instead kmalloc_array in bpf_jit_comp

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit de920fc64cbaa031f947e9be964bda05fd090380 ]

x86 bpf_jit_comp.c used kmalloc_array to store jited addresses
for each bpf insn. With a large bpf program, we have see the
following allocation failures in our production server:

    page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP),
                             nodemask=(null),cpuset=/,mems_allowed=0"
    Call Trace:
    dump_stack+0x50/0x70
    warn_alloc.cold.120+0x72/0xd2
    ? __alloc_pages_direct_compact+0x157/0x160
    __alloc_pages_slowpath+0xcdb/0xd00
    ? get_page_from_freelist+0xe44/0x1600
    ? vunmap_page_range+0x1ba/0x340
    __alloc_pages_nodemask+0x2c9/0x320
    kmalloc_order+0x18/0x80
    kmalloc_order_trace+0x1d/0xa0
    bpf_int_jit_compile+0x1e2/0x484
    ? kmalloc_order_trace+0x1d/0xa0
    bpf_prog_select_runtime+0xc3/0x150
    bpf_prog_load+0x480/0x720
    ? __mod_memcg_lruvec_state+0x21/0x100
    __do_sys_bpf+0xc31/0x2040
    ? close_pdeo+0x86/0xe0
    do_syscall_64+0x42/0x110
    entry_SYSCALL_64_after_hwframe+0x44/0xa9
    RIP: 0033:0x7f2f300f7fa9
    Code: Bad RIP value.

Dumped assembly:

    ffffffff810b6d70 <bpf_int_jit_compile>:
    ; {
    ffffffff810b6d70: e8 eb a5 b4 00        callq   0xffffffff81c01360 <__fentry__>
    ffffffff810b6d75: 41 57                 pushq   %r15
    ...
    ffffffff810b6f39: e9 72 fe ff ff        jmp     0xffffffff810b6db0 <bpf_int_jit_compile+0x40>
    ;       addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
    ffffffff810b6f3e: 8b 45 0c              movl    12(%rbp), %eax
    ;       return __kmalloc(bytes, flags);
    ffffffff810b6f41: be c0 0c 00 00        movl    $3264, %esi
    ;       addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
    ffffffff810b6f46: 8d 78 01              leal    1(%rax), %edi
    ;       if (unlikely(check_mul_overflow(n, size, &bytes)))
    ffffffff810b6f49: 48 c1 e7 02           shlq    $2, %rdi
    ;       return __kmalloc(bytes, flags);
    ffffffff810b6f4d: e8 8e 0c 1d 00        callq   0xffffffff81287be0 <__kmalloc>
    ;       if (!addrs) {
    ffffffff810b6f52: 48 85 c0              testq   %rax, %rax

Change kmalloc_array() to kvmalloc_array() to avoid potential
allocation error for big bpf programs.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210309015647.3657852-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/net/bpf_jit_comp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 796506dcfc42..49a506583e0c 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -2019,7 +2019,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		extra_pass = true;
 		goto skip_init_addrs;
 	}
-	addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
+	addrs = kvmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
 	if (!addrs) {
 		prog = orig_prog;
 		goto out_addrs;
@@ -2109,7 +2109,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		if (image)
 			bpf_prog_fill_jited_linfo(prog, addrs + 1);
 out_addrs:
-		kfree(addrs);
+		kvfree(addrs);
 		kfree(jit_data);
 		prog->aux->jit_data = NULL;
 	}
-- 
2.30.1

[PATCH AUTOSEL 5.11 06/38] net/mlx5e: Enforce minimum value check for ICOSQ size

[Sasha Levin]

From: Tariq Toukan <tariqt@nvidia.com>

[ Upstream commit 5115daa675ccf70497fe56e8916cf738d8212c10 ]

The ICOSQ size should not go below MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE.
Enforce this where it's missing.

Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index a2e0b548bf57..4ce3aeb3548f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2317,8 +2317,9 @@ static u8 mlx5e_build_icosq_log_wq_sz(struct mlx5e_params *params,
 {
 	switch (params->rq_wq_type) {
 	case MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ:
-		return order_base_2(MLX5E_UMR_WQEBBS) +
-			mlx5e_get_rq_log_wq_sz(rqp->rqc);
+		return max_t(u8, MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE,
+			     order_base_2(MLX5E_UMR_WQEBBS) +
+			     mlx5e_get_rq_log_wq_sz(rqp->rqc));
 	default: /* MLX5_WQ_TYPE_CYCLIC */
 		return MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE;
 	}
-- 
2.30.1

[PATCH AUTOSEL 5.11 07/38] net: pxa168_eth: Fix a potential data race in pxa168_eth_remove

[Sasha Levin]

From: Pavel Andrianov <andrianov@ispras.ru>

[ Upstream commit 0571a753cb07982cc82f4a5115e0b321da89e1f3 ]

pxa168_eth_remove() firstly calls unregister_netdev(),
then cancels a timeout work. unregister_netdev() shuts down a device
interface and removes it from the kernel tables. If the timeout occurs
in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop
and open of the device. It may lead to an inconsistent state and memory
leaks.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Pavel Andrianov <andrianov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/pxa168_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index d1e4d42e497d..3712e1786091 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -1544,8 +1544,8 @@ static int pxa168_eth_remove(struct platform_device *pdev)
 	clk_disable_unprepare(pep->clk);
 	mdiobus_unregister(pep->smi_bus);
 	mdiobus_free(pep->smi_bus);
-	unregister_netdev(dev);
 	cancel_work_sync(&pep->tx_timeout_task);
+	unregister_netdev(dev);
 	free_netdev(dev);
 	return 0;
 }
-- 
2.30.1

[PATCH AUTOSEL 5.11 09/38] mISDN: fix crash in fritzpci

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit a9f81244d2e33e6dfcef120fefd30c96b3f7cdb0 ]

setup_fritz() in avmfritz.c might fail with -EIO and in this case the
isac.type and isac.write_reg is not initialized and remains 0(NULL).
A subsequent call to isac_release() will dereference isac->write_reg and
crash.

[    1.737444] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.737809] #PF: supervisor instruction fetch in kernel mode
[    1.738106] #PF: error_code(0x0010) - not-present page
[    1.738378] PGD 0 P4D 0
[    1.738515] Oops: 0010 [#1] SMP NOPTI
[    1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78
[    1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-p
rebuilt.qemu.org 04/01/2014
[    1.739664] RIP: 0010:0x0
[    1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[    1.740200] RSP: 0018:ffffc9000027ba10 EFLAGS: 00010202
[    1.740478] RAX: 0000000000000000 RBX: ffff888102f41840 RCX: 0000000000000027
[    1.740853] RDX: 00000000000000ff RSI: 0000000000000020 RDI: ffff888102f41800
[    1.741226] RBP: ffffc9000027ba20 R08: ffff88817bc18440 R09: ffffc9000027b808
[    1.741600] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888102f41840
[    1.741976] R13: 00000000fffffffb R14: ffff888102f41800 R15: ffff8881008b0000
[    1.742351] FS:  00007fda3a38a8c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000
[    1.742774] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.743076] CR2: ffffffffffffffd6 CR3: 00000001021ec000 CR4: 00000000000006f0
[    1.743452] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    1.743828] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    1.744206] Call Trace:
[    1.744339]  isac_release+0xcc/0xe0 [mISDNipac]
[    1.744582]  fritzpci_probe.cold+0x282/0x739 [avmfritz]
[    1.744861]  local_pci_probe+0x48/0x80
[    1.745063]  pci_device_probe+0x10f/0x1c0
[    1.745278]  really_probe+0xfb/0x420
[    1.745471]  driver_probe_device+0xe9/0x160
[    1.745693]  device_driver_attach+0x5d/0x70
[    1.745917]  __driver_attach+0x8f/0x150
[    1.746123]  ? device_driver_attach+0x70/0x70
[    1.746354]  bus_for_each_dev+0x7e/0xc0
[    1.746560]  driver_attach+0x1e/0x20
[    1.746751]  bus_add_driver+0x152/0x1f0
[    1.746957]  driver_register+0x74/0xd0
[    1.747157]  ? 0xffffffffc00d8000
[    1.747334]  __pci_register_driver+0x54/0x60
[    1.747562]  AVM_init+0x36/0x1000 [avmfritz]
[    1.747791]  do_one_initcall+0x48/0x1d0
[    1.747997]  ? __cond_resched+0x19/0x30
[    1.748206]  ? kmem_cache_alloc_trace+0x390/0x440
[    1.748458]  ? do_init_module+0x28/0x250
[    1.748669]  do_init_module+0x62/0x250
[    1.748870]  load_module+0x23ee/0x26a0
[    1.749073]  __do_sys_finit_module+0xc2/0x120
[    1.749307]  ? __do_sys_finit_module+0xc2/0x120
[    1.749549]  __x64_sys_finit_module+0x1a/0x20
[    1.749782]  do_syscall_64+0x38/0x90

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/mISDNipac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
index ec475087fbf9..39f841b42488 100644
--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -694,7 +694,7 @@ isac_release(struct isac_hw *isac)
 {
 	if (isac->type & IPAC_TYPE_ISACX)
 		WriteISAC(isac, ISACX_MASK, 0xff);
-	else
+	else if (isac->type != 0)
 		WriteISAC(isac, ISAC_MASK, 0xff);
 	if (isac->dch.timer.function != NULL) {
 		del_timer(&isac->dch.timer);
-- 
2.30.1

[PATCH AUTOSEL 5.11 10/38] net: correct sk_acceptq_is_full()

[Sasha Levin]

From: liuyacan <yacanliu@163.com>

[ Upstream commit f211ac154577ec9ccf07c15f18a6abf0d9bdb4ab ]

The "backlog" argument in listen() specifies
the maximom length of pending connections,
so the accept queue should be considered full
if there are exactly "backlog" elements.

Signed-off-by: liuyacan <yacanliu@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sock.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/sock.h b/include/net/sock.h
index 129d200bccb4..a95f38a4b8c6 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -936,7 +936,7 @@ static inline void sk_acceptq_added(struct sock *sk)
 
 static inline bool sk_acceptq_is_full(const struct sock *sk)
 {
-	return READ_ONCE(sk->sk_ack_backlog) > READ_ONCE(sk->sk_max_ack_backlog);
+	return READ_ONCE(sk->sk_ack_backlog) >= READ_ONCE(sk->sk_max_ack_backlog);
 }
 
 /*
-- 
2.30.1

Re: [PATCH AUTOSEL 5.11 10/38] net: correct sk_acceptq_is_full()

[Eric Dumazet]

On 3/30/21 12:21 AM, Sasha Levin wrote:
> From: liuyacan <yacanliu@163.com>
> 
> [ Upstream commit f211ac154577ec9ccf07c15f18a6abf0d9bdb4ab ]
> 
> The "backlog" argument in listen() specifies
> the maximom length of pending connections,
> so the accept queue should be considered full
> if there are exactly "backlog" elements.
> 
> Signed-off-by: liuyacan <yacanliu@163.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  include/net/sock.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/include/net/sock.h b/include/net/sock.h
> index 129d200bccb4..a95f38a4b8c6 100644
> --- a/include/net/sock.h
> +++ b/include/net/sock.h
> @@ -936,7 +936,7 @@ static inline void sk_acceptq_added(struct sock *sk)
>  
>  static inline bool sk_acceptq_is_full(const struct sock *sk)
>  {
> -	return READ_ONCE(sk->sk_ack_backlog) > READ_ONCE(sk->sk_max_ack_backlog);
> +	return READ_ONCE(sk->sk_ack_backlog) >= READ_ONCE(sk->sk_max_ack_backlog);
>  }
>  
>  /*
> 


????

I have not seen this patch going in our trees.

First, there was no Fixes: tag, so this is quite unfortunate.

Second, we already had such wrong patches in the past.

Please look at commits
64a146513f8f12ba204b7bf5cb7e9505594ead42 [NET]: Revert incorrect accept queue backlog changes.
8488df894d05d6fa41c2bd298c335f944bb0e401 [NET]: Fix bugs in "Whether sock accept queue is full" checking

Please revert  this patch, thanks !

Re: [PATCH AUTOSEL 5.11 10/38] net: correct sk_acceptq_is_full()

[Sasha Levin]

On Wed, Mar 31, 2021 at 06:17:27PM +0200, Eric Dumazet wrote:
>
>
>On 3/30/21 12:21 AM, Sasha Levin wrote:
>> From: liuyacan <yacanliu@163.com>
>>
>> [ Upstream commit f211ac154577ec9ccf07c15f18a6abf0d9bdb4ab ]
>>
>> The "backlog" argument in listen() specifies
>> the maximom length of pending connections,
>> so the accept queue should be considered full
>> if there are exactly "backlog" elements.
>>
>> Signed-off-by: liuyacan <yacanliu@163.com>
>> Signed-off-by: David S. Miller <davem@davemloft.net>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>  include/net/sock.h | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/include/net/sock.h b/include/net/sock.h
>> index 129d200bccb4..a95f38a4b8c6 100644
>> --- a/include/net/sock.h
>> +++ b/include/net/sock.h
>> @@ -936,7 +936,7 @@ static inline void sk_acceptq_added(struct sock *sk)
>>
>>  static inline bool sk_acceptq_is_full(const struct sock *sk)
>>  {
>> -	return READ_ONCE(sk->sk_ack_backlog) > READ_ONCE(sk->sk_max_ack_backlog);
>> +	return READ_ONCE(sk->sk_ack_backlog) >= READ_ONCE(sk->sk_max_ack_backlog);
>>  }
>>
>>  /*
>>
>
>
>????
>
>I have not seen this patch going in our trees.
>
>First, there was no Fixes: tag, so this is quite unfortunate.
>
>Second, we already had such wrong patches in the past.
>
>Please look at commits
>64a146513f8f12ba204b7bf5cb7e9505594ead42 [NET]: Revert incorrect accept queue backlog changes.
>8488df894d05d6fa41c2bd298c335f944bb0e401 [NET]: Fix bugs in "Whether sock accept queue is full" checking
>
>Please revert  this patch, thanks !

Dropped, thanks for letting me know!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.11 11/38] net: arcnet: com20020 fix error handling

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit 6577b9a551aedb86bca6d4438c28386361845108 ]

There are two issues when handling error case in com20020pci_probe()

1. priv might be not initialized yet when calling com20020pci_remove()
from com20020pci_probe(), since the priv is set at the very last but it
can jump to error handling in the middle and priv remains NULL.
2. memory leak - the net device is allocated in alloc_arcdev but not
properly released if error happens in the middle of the big for loop

[    1.529110] BUG: kernel NULL pointer dereference, address: 0000000000000008
[    1.531447] RIP: 0010:com20020pci_remove+0x15/0x60 [com20020_pci]
[    1.536805] Call Trace:
[    1.536939]  com20020pci_probe+0x3f2/0x48c [com20020_pci]
[    1.537226]  local_pci_probe+0x48/0x80
[    1.539918]  com20020pci_init+0x3f/0x1000 [com20020_pci]

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/arcnet/com20020-pci.c | 34 +++++++++++++++++--------------
 1 file changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index 8bdc44b7e09a..3c8f665c1558 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -127,6 +127,8 @@ static int com20020pci_probe(struct pci_dev *pdev,
 	int i, ioaddr, ret;
 	struct resource *r;
 
+	ret = 0;
+
 	if (pci_enable_device(pdev))
 		return -EIO;
 
@@ -139,6 +141,8 @@ static int com20020pci_probe(struct pci_dev *pdev,
 	priv->ci = ci;
 	mm = &ci->misc_map;
 
+	pci_set_drvdata(pdev, priv);
+
 	INIT_LIST_HEAD(&priv->list_dev);
 
 	if (mm->size) {
@@ -161,7 +165,7 @@ static int com20020pci_probe(struct pci_dev *pdev,
 		dev = alloc_arcdev(device);
 		if (!dev) {
 			ret = -ENOMEM;
-			goto out_port;
+			break;
 		}
 		dev->dev_port = i;
 
@@ -178,7 +182,7 @@ static int com20020pci_probe(struct pci_dev *pdev,
 			pr_err("IO region %xh-%xh already allocated\n",
 			       ioaddr, ioaddr + cm->size - 1);
 			ret = -EBUSY;
-			goto out_port;
+			goto err_free_arcdev;
 		}
 
 		/* Dummy access after Reset
@@ -216,18 +220,18 @@ static int com20020pci_probe(struct pci_dev *pdev,
 		if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) {
 			pr_err("IO address %Xh is empty!\n", ioaddr);
 			ret = -EIO;
-			goto out_port;
+			goto err_free_arcdev;
 		}
 		if (com20020_check(dev)) {
 			ret = -EIO;
-			goto out_port;
+			goto err_free_arcdev;
 		}
 
 		card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev),
 				    GFP_KERNEL);
 		if (!card) {
 			ret = -ENOMEM;
-			goto out_port;
+			goto err_free_arcdev;
 		}
 
 		card->index = i;
@@ -253,29 +257,29 @@ static int com20020pci_probe(struct pci_dev *pdev,
 
 		ret = devm_led_classdev_register(&pdev->dev, &card->tx_led);
 		if (ret)
-			goto out_port;
+			goto err_free_arcdev;
 
 		ret = devm_led_classdev_register(&pdev->dev, &card->recon_led);
 		if (ret)
-			goto out_port;
+			goto err_free_arcdev;
 
 		dev_set_drvdata(&dev->dev, card);
 
 		ret = com20020_found(dev, IRQF_SHARED);
 		if (ret)
-			goto out_port;
+			goto err_free_arcdev;
 
 		devm_arcnet_led_init(dev, dev->dev_id, i);
 
 		list_add(&card->list, &priv->list_dev);
-	}
+		continue;
 
-	pci_set_drvdata(pdev, priv);
-
-	return 0;
-
-out_port:
-	com20020pci_remove(pdev);
+err_free_arcdev:
+		free_arcdev(dev);
+		break;
+	}
+	if (ret)
+		com20020pci_remove(pdev);
 	return ret;
 }
 
-- 
2.30.1

[PATCH AUTOSEL 5.11 12/38] can: kvaser_usb: Add support for USBcan Pro 4xHS

[Sasha Levin]

From: Jimmy Assarsson <extja@kvaser.com>

[ Upstream commit 7507479c46b120c37ef83e59be7683a526e98e1a ]

Add support for Kvaser USBcan Pro 4xHS.

Link: https://lore.kernel.org/r/20210309091724.31262-2-jimmyassarsson@gmail.com
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/usb/Kconfig                      | 1 +
 drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index c1e5d5b570b6..538f4d9adb91 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -73,6 +73,7 @@ config CAN_KVASER_USB
 	    - Kvaser Memorator Pro 5xHS
 	    - Kvaser USBcan Light 4xHS
 	    - Kvaser USBcan Pro 2xHS v2
+	    - Kvaser USBcan Pro 4xHS
 	    - Kvaser USBcan Pro 5xHS
 	    - Kvaser U100
 	    - Kvaser U100P
diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
index e2d58846c40c..073c4a39e718 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c
@@ -86,8 +86,9 @@
 #define USB_U100_PRODUCT_ID			273
 #define USB_U100P_PRODUCT_ID			274
 #define USB_U100S_PRODUCT_ID			275
+#define USB_USBCAN_PRO_4HS_PRODUCT_ID		276
 #define USB_HYDRA_PRODUCT_ID_END \
-	USB_U100S_PRODUCT_ID
+	USB_USBCAN_PRO_4HS_PRODUCT_ID
 
 static inline bool kvaser_is_leaf(const struct usb_device_id *id)
 {
@@ -193,6 +194,7 @@ static const struct usb_device_id kvaser_usb_table[] = {
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_U100_PRODUCT_ID) },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_U100P_PRODUCT_ID) },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_U100S_PRODUCT_ID) },
+	{ USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_PRO_4HS_PRODUCT_ID) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, kvaser_usb_table);
-- 
2.30.1

[PATCH AUTOSEL 5.11 13/38] mac80211: fix double free in ibss_leave

[Sasha Levin]

From: Markus Theil <markus.theil@tu-ilmenau.de>

[ Upstream commit 3bd801b14e0c5d29eeddc7336558beb3344efaa3 ]

Clear beacon ie pointer and ie length after free
in order to prevent double free.

==================================================================
BUG: KASAN: double-free or invalid-free \
in ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876

CPU: 0 PID: 8472 Comm: syz-executor100 Not tainted 5.11.0-rc6-syzkaller #0
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 print_address_description.constprop.0.cold+0x5b/0x2c6 mm/kasan/report.c:230
 kasan_report_invalid_free+0x51/0x80 mm/kasan/report.c:355
 ____kasan_slab_free+0xcc/0xe0 mm/kasan/common.c:341
 kasan_slab_free include/linux/kasan.h:192 [inline]
 __cache_free mm/slab.c:3424 [inline]
 kfree+0xed/0x270 mm/slab.c:3760
 ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876
 rdev_leave_ibss net/wireless/rdev-ops.h:545 [inline]
 __cfg80211_leave_ibss+0x19a/0x4c0 net/wireless/ibss.c:212
 __cfg80211_leave+0x327/0x430 net/wireless/core.c:1172
 cfg80211_leave net/wireless/core.c:1221 [inline]
 cfg80211_netdev_notifier_call+0x9e8/0x12c0 net/wireless/core.c:1335
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2040
 call_netdevice_notifiers_extack net/core/dev.c:2052 [inline]
 call_netdevice_notifiers net/core/dev.c:2066 [inline]
 __dev_close_many+0xee/0x2e0 net/core/dev.c:1586
 __dev_close net/core/dev.c:1624 [inline]
 __dev_change_flags+0x2cb/0x730 net/core/dev.c:8476
 dev_change_flags+0x8a/0x160 net/core/dev.c:8549
 dev_ifsioc+0x210/0xa70 net/core/dev_ioctl.c:265
 dev_ioctl+0x1b1/0xc40 net/core/dev_ioctl.c:511
 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
 sock_ioctl+0x477/0x6a0 net/socket.c:1177
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+93976391bf299d425f44@syzkaller.appspotmail.com
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20210213133653.367130-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ibss.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 1f552f374e97..a7ac53a2f00d 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -1874,6 +1874,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata)
 
 	/* remove beacon */
 	kfree(sdata->u.ibss.ie);
+	sdata->u.ibss.ie = NULL;
+	sdata->u.ibss.ie_len = 0;
 
 	/* on the next join, re-program HT parameters */
 	memset(&ifibss->ht_capa, 0, sizeof(ifibss->ht_capa));
-- 
2.30.1

[PATCH AUTOSEL 5.11 14/38] mac80211: Check crypto_aead_encrypt for errors

[Sasha Levin]

From: Daniel Phan <daniel.phan36@gmail.com>

[ Upstream commit 58d25626f6f0ea5bcec3c13387b9f835d188723d ]

crypto_aead_encrypt returns <0 on error, so if these calls are not checked,
execution may continue with failed encrypts.  It also seems that these two
crypto_aead_encrypt calls are the only instances in the codebase that are
not checked for errors.

Signed-off-by: Daniel Phan <daniel.phan36@gmail.com>
Link: https://lore.kernel.org/r/20210309204137.823268-1-daniel.phan36@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/aead_api.c | 5 +++--
 net/mac80211/aes_gmac.c | 5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/aead_api.c b/net/mac80211/aead_api.c
index d7b3d905d535..b00d6f5b33f4 100644
--- a/net/mac80211/aead_api.c
+++ b/net/mac80211/aead_api.c
@@ -23,6 +23,7 @@ int aead_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, size_t aad_len,
 	struct aead_request *aead_req;
 	int reqsize = sizeof(*aead_req) + crypto_aead_reqsize(tfm);
 	u8 *__aad;
+	int ret;
 
 	aead_req = kzalloc(reqsize + aad_len, GFP_ATOMIC);
 	if (!aead_req)
@@ -40,10 +41,10 @@ int aead_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, size_t aad_len,
 	aead_request_set_crypt(aead_req, sg, sg, data_len, b_0);
 	aead_request_set_ad(aead_req, sg[0].length);
 
-	crypto_aead_encrypt(aead_req);
+	ret = crypto_aead_encrypt(aead_req);
 	kfree_sensitive(aead_req);
 
-	return 0;
+	return ret;
 }
 
 int aead_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, size_t aad_len,
diff --git a/net/mac80211/aes_gmac.c b/net/mac80211/aes_gmac.c
index 6f3b3a0cc10a..512cab073f2e 100644
--- a/net/mac80211/aes_gmac.c
+++ b/net/mac80211/aes_gmac.c
@@ -22,6 +22,7 @@ int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
 	struct aead_request *aead_req;
 	int reqsize = sizeof(*aead_req) + crypto_aead_reqsize(tfm);
 	const __le16 *fc;
+	int ret;
 
 	if (data_len < GMAC_MIC_LEN)
 		return -EINVAL;
@@ -59,10 +60,10 @@ int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
 	aead_request_set_crypt(aead_req, sg, sg, 0, iv);
 	aead_request_set_ad(aead_req, GMAC_AAD_LEN + data_len);
 
-	crypto_aead_encrypt(aead_req);
+	ret = crypto_aead_encrypt(aead_req);
 	kfree_sensitive(aead_req);
 
-	return 0;
+	return ret;
 }
 
 struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[],
-- 
2.30.1

[PATCH AUTOSEL 5.11 15/38] mac80211: choose first enabled channel for monitor

[Sasha Levin]

From: Karthikeyan Kathirvel <kathirve@codeaurora.org>

[ Upstream commit 041c881a0ba8a75f71118bd9766b78f04beed469 ]

Even if the first channel from sband channel list is invalid
or disabled mac80211 ends up choosing it as the default channel
for monitor interfaces, making them not usable.

Fix this by assigning the first available valid or enabled
channel instead.

Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeaurora.org
[reword commit message, comment, code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/main.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index dee88ec566ad..d1023188ef37 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -970,8 +970,19 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 			continue;
 
 		if (!dflt_chandef.chan) {
+			/*
+			 * Assign the first enabled channel to dflt_chandef
+			 * from the list of channels
+			 */
+			for (i = 0; i < sband->n_channels; i++)
+				if (!(sband->channels[i].flags &
+						IEEE80211_CHAN_DISABLED))
+					break;
+			/* if none found then use the first anyway */
+			if (i == sband->n_channels)
+				i = 0;
 			cfg80211_chandef_create(&dflt_chandef,
-						&sband->channels[0],
+						&sband->channels[i],
 						NL80211_CHAN_NO_HT);
 			/* init channel we're on */
 			if (!local->use_chanctx && !local->_oper_chandef.chan) {
-- 
2.30.1

[PATCH AUTOSEL 5.11 19/38] netfilter: conntrack: Fix gre tunneling over ipv6

[Sasha Levin]

From: Ludovic Senecaux <linuxludo@free.fr>

[ Upstream commit 8b2030b4305951f44afef80225f1475618e25a73 ]

This fix permits gre connections to be tracked within ip6tables rules

Signed-off-by: Ludovic Senecaux <linuxludo@free.fr>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_proto_gre.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c
index 5b05487a60d2..db11e403d818 100644
--- a/net/netfilter/nf_conntrack_proto_gre.c
+++ b/net/netfilter/nf_conntrack_proto_gre.c
@@ -218,9 +218,6 @@ int nf_conntrack_gre_packet(struct nf_conn *ct,
 			    enum ip_conntrack_info ctinfo,
 			    const struct nf_hook_state *state)
 {
-	if (state->pf != NFPROTO_IPV4)
-		return -NF_ACCEPT;
-
 	if (!nf_ct_is_confirmed(ct)) {
 		unsigned int *timeouts = nf_ct_timeout_lookup(ct);
 
-- 
2.30.1

[PATCH AUTOSEL 5.11 20/38] netfilter: nftables: skip hook overlap logic if flowtable is stale

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 86fe2c19eec4728fd9a42ba18f3b47f0d5f9fd7c ]

If the flowtable has been previously removed in this batch, skip the
hook overlap checks. This fixes spurious EEXIST errors when removing and
adding the flowtable in the same batch.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 8ee9f40cc0ea..f18e54d3ca51 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -6749,6 +6749,9 @@ static int nft_register_flowtable_net_hooks(struct net *net,
 
 	list_for_each_entry(hook, hook_list, list) {
 		list_for_each_entry(ft, &table->flowtables, list) {
+			if (!nft_is_active_next(net, ft))
+				continue;
+
 			list_for_each_entry(hook2, &ft->hook_list, list) {
 				if (hook->ops.dev == hook2->ops.dev &&
 				    hook->ops.pf == hook2->ops.pf) {
-- 
2.30.1

[PATCH AUTOSEL 5.11 21/38] net: ipa: fix init header command validation

[Sasha Levin]

From: Alex Elder <elder@linaro.org>

[ Upstream commit b4afd4b90a7cfe54c7cd9db49e3c36d552325eac ]

We use ipa_cmd_header_valid() to ensure certain values we will
program into hardware are within range, well in advance of when we
actually program them.  This way we avoid having to check for errors
when we actually program the hardware.

Unfortunately the dev_err() call for a bad offset value does not
supply the arguments to match the format specifiers properly.
Fix this.

There was also supposed to be a check to ensure the size to be
programmed fits in the field that holds it.  Add this missing check.

Rearrange the way we ensure the header table fits in overall IPA
memory range.

Finally, update ipa_cmd_table_valid() so the format of messages
printed for errors matches what's done in ipa_cmd_header_valid().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ipa/ipa_cmd.c | 50 ++++++++++++++++++++++++++-------------
 1 file changed, 33 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ipa/ipa_cmd.c b/drivers/net/ipa/ipa_cmd.c
index 002e51448510..ba3a2ec8e2ef 100644
--- a/drivers/net/ipa/ipa_cmd.c
+++ b/drivers/net/ipa/ipa_cmd.c
@@ -175,21 +175,23 @@ bool ipa_cmd_table_valid(struct ipa *ipa, const struct ipa_mem *mem,
 			    : field_max(IP_FLTRT_FLAGS_NHASH_ADDR_FMASK);
 	if (mem->offset > offset_max ||
 	    ipa->mem_offset > offset_max - mem->offset) {
-		dev_err(dev, "IPv%c %s%s table region offset too large "
-			      "(0x%04x + 0x%04x > 0x%04x)\n",
-			      ipv6 ? '6' : '4', hashed ? "hashed " : "",
-			      route ? "route" : "filter",
-			      ipa->mem_offset, mem->offset, offset_max);
+		dev_err(dev, "IPv%c %s%s table region offset too large\n",
+			ipv6 ? '6' : '4', hashed ? "hashed " : "",
+			route ? "route" : "filter");
+		dev_err(dev, "    (0x%04x + 0x%04x > 0x%04x)\n",
+			ipa->mem_offset, mem->offset, offset_max);
+
 		return false;
 	}
 
 	if (mem->offset > ipa->mem_size ||
 	    mem->size > ipa->mem_size - mem->offset) {
-		dev_err(dev, "IPv%c %s%s table region out of range "
-			      "(0x%04x + 0x%04x > 0x%04x)\n",
-			      ipv6 ? '6' : '4', hashed ? "hashed " : "",
-			      route ? "route" : "filter",
-			      mem->offset, mem->size, ipa->mem_size);
+		dev_err(dev, "IPv%c %s%s table region out of range\n",
+			ipv6 ? '6' : '4', hashed ? "hashed " : "",
+			route ? "route" : "filter");
+		dev_err(dev, "    (0x%04x + 0x%04x > 0x%04x)\n",
+			mem->offset, mem->size, ipa->mem_size);
+
 		return false;
 	}
 
@@ -205,22 +207,36 @@ static bool ipa_cmd_header_valid(struct ipa *ipa)
 	u32 size_max;
 	u32 size;
 
+	/* In ipa_cmd_hdr_init_local_add() we record the offset and size
+	 * of the header table memory area.  Make sure the offset and size
+	 * fit in the fields that need to hold them, and that the entire
+	 * range is within the overall IPA memory range.
+	 */
 	offset_max = field_max(HDR_INIT_LOCAL_FLAGS_HDR_ADDR_FMASK);
 	if (mem->offset > offset_max ||
 	    ipa->mem_offset > offset_max - mem->offset) {
-		dev_err(dev, "header table region offset too large "
-			      "(0x%04x + 0x%04x > 0x%04x)\n",
-			      ipa->mem_offset + mem->offset, offset_max);
+		dev_err(dev, "header table region offset too large\n");
+		dev_err(dev, "    (0x%04x + 0x%04x > 0x%04x)\n",
+			ipa->mem_offset, mem->offset, offset_max);
+
 		return false;
 	}
 
 	size_max = field_max(HDR_INIT_LOCAL_FLAGS_TABLE_SIZE_FMASK);
 	size = ipa->mem[IPA_MEM_MODEM_HEADER].size;
 	size += ipa->mem[IPA_MEM_AP_HEADER].size;
-	if (mem->offset > ipa->mem_size || size > ipa->mem_size - mem->offset) {
-		dev_err(dev, "header table region out of range "
-			      "(0x%04x + 0x%04x > 0x%04x)\n",
-			      mem->offset, size, ipa->mem_size);
+
+	if (size > size_max) {
+		dev_err(dev, "header table region size too large\n");
+		dev_err(dev, "    (0x%04x > 0x%08x)\n", size, size_max);
+
+		return false;
+	}
+	if (size > ipa->mem_size || mem->offset > ipa->mem_size - size) {
+		dev_err(dev, "header table region out of range\n");
+		dev_err(dev, "    (0x%04x + 0x%04x > 0x%04x)\n",
+			mem->offset, size, ipa->mem_size);
+
 		return false;
 	}
 
-- 
2.30.1

[PATCH AUTOSEL 5.11 29/38] ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation

[Sasha Levin]

From: Yangbo Lu <yangbo.lu@nxp.com>

[ Upstream commit f51d7bf1dbe5522c51c93fe8faa5f4abbdf339cd ]

Current calculation for diff of TMR_ADD register value may have
64-bit overflow in this code line, when long type scaled_ppm is
large.

adj *= scaled_ppm;

This patch is to resolve it by using mul_u64_u64_div_u64().

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ptp/ptp_qoriq.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/ptp/ptp_qoriq.c b/drivers/ptp/ptp_qoriq.c
index beb5f74944cd..08f4cf0ad9e3 100644
--- a/drivers/ptp/ptp_qoriq.c
+++ b/drivers/ptp/ptp_qoriq.c
@@ -189,15 +189,16 @@ int ptp_qoriq_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
 	tmr_add = ptp_qoriq->tmr_add;
 	adj = tmr_add;
 
-	/* calculate diff as adj*(scaled_ppm/65536)/1000000
-	 * and round() to the nearest integer
+	/*
+	 * Calculate diff and round() to the nearest integer
+	 *
+	 * diff = adj * (ppb / 1000000000)
+	 *      = adj * scaled_ppm / 65536000000
 	 */
-	adj *= scaled_ppm;
-	diff = div_u64(adj, 8000000);
-	diff = (diff >> 13) + ((diff >> 12) & 1);
+	diff = mul_u64_u64_div_u64(adj, scaled_ppm, 32768000000);
+	diff = DIV64_U64_ROUND_UP(diff, 2);
 
 	tmr_add = neg_adj ? tmr_add - diff : tmr_add + diff;
-
 	ptp_qoriq->write(&regs->ctrl_regs->tmr_add, tmr_add);
 
 	return 0;
-- 
2.30.1