From: Michael Di Domenico <mdidomenico4@gmail.com>
To: netdev@vger.kernel.org
Subject: sis900 tx timeouts
Date: Thu, 23 Apr 2009 12:53:49 -0400 [thread overview]
Message-ID: <e75d22a90904230953gf855de5j18fb8ee1aa6d5a85@mail.gmail.com> (raw)
I have an Intel motherboard with an sis900 nic chipset down on the
board. When i put the NIC under heavy send traffic i start to see
Transmit error's in dmesg and the nic stops sending data. if i do an
ifdown eth0; ifup eth0 the nic starts responding again just fine and
will run for a while, but eventually the transmit errors return. Can
anyone lend advice on how i might fix or help track down this error?
thanks
--- lspci -vvv
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
PCI Fast Ethernet (rev 91)
Subsystem: Intel Corporation Unknown device d61f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 225
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at 4a100000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 4a120000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--- dmesg
eth0: Transmit error, Tx status 060005ea.
eth0: Transmit error, Tx status 060005ea.
--- uname -a
Linux node5.home 2.6.18-92.1.17.el5_lustre.1.6.7.1smp #1 SMP Mon Apr
13 18:23:52 MDT 2009 i686 i686 i386 GNU/Linux
reply other threads:[~2009-04-23 16:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e75d22a90904230953gf855de5j18fb8ee1aa6d5a85@mail.gmail.com \
--to=mdidomenico4@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).