From mboxrd@z Thu Jan 1 00:00:00 1970 From: Giuseppe CAVALLARO Subject: Re: [PATCH 03/17] net: stmmac: fix some typos in comments Date: Tue, 31 Jan 2017 11:03:33 +0100 Message-ID: References: <20170131091152.13842-1-clabbe.montjoie@gmail.com> <20170131091152.13842-4-clabbe.montjoie@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="windows-1252"; format=flowed Content-Transfer-Encoding: 7bit Cc: , To: Corentin Labbe , , Return-path: Received: from mx08-00178001.pphosted.com ([91.207.212.93]:40876 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751447AbdAaKor (ORCPT ); Tue, 31 Jan 2017 05:44:47 -0500 In-Reply-To: <20170131091152.13842-4-clabbe.montjoie@gmail.com> Sender: netdev-owner@vger.kernel.org List-ID: On 1/31/2017 10:11 AM, Corentin Labbe wrote: > This patch fix some typos in comments. > > Signed-off-by: Corentin Labbe Acked-by: Giuseppe Cavallaro > --- > drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 6 +++--- > drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 16 ++++++++-------- > drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +- > 3 files changed, 12 insertions(+), 12 deletions(-) > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c > index a414bde..3b1570d 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c > @@ -102,7 +102,7 @@ static void show_tx_process_state(unsigned int status) > pr_debug("- TX (Stopped): Reset or Stop command\n"); > break; > case 1: > - pr_debug("- TX (Running):Fetching the Tx desc\n"); > + pr_debug("- TX (Running): Fetching the Tx desc\n"); > break; > case 2: > pr_debug("- TX (Running): Waiting for end of tx\n"); > @@ -136,7 +136,7 @@ static void show_rx_process_state(unsigned int status) > pr_debug("- RX (Running): Fetching the Rx desc\n"); > break; > case 2: > - pr_debug("- RX (Running):Checking for end of pkt\n"); > + pr_debug("- RX (Running): Checking for end of pkt\n"); > break; > case 3: > pr_debug("- RX (Running): Waiting for Rx pkt\n"); > @@ -246,7 +246,7 @@ void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6], > unsigned long data; > > data = (addr[5] << 8) | addr[4]; > - /* For MAC Addr registers se have to set the Address Enable (AE) > + /* For MAC Addr registers we have to set the Address Enable (AE) > * bit that has no effect on the High Reg 0 where the bit 31 (MO) > * is RO. > */ > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > index bf2d8e6..ee71c07 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > @@ -216,7 +216,7 @@ static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv) > /** > * stmmac_hw_fix_mac_speed - callback for speed selection > * @priv: driver private structure > - * Description: on some platforms (e.g. ST), some HW system configuraton > + * Description: on some platforms (e.g. ST), some HW system configuration > * registers have to be set according to the link speed negotiated. > */ > static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv) > @@ -415,7 +415,7 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p, > /** > * stmmac_hwtstamp_ioctl - control hardware timestamping. > * @dev: device pointer. > - * @ifr: An IOCTL specefic structure, that can contain a pointer to > + * @ifr: An IOCTL specific structure, that can contain a pointer to > * a proprietary structure used to pass information to the driver. > * Description: > * This function configures the MAC to enable/disable both outgoing(TX) > @@ -1014,7 +1014,7 @@ static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i) > * @dev: net device structure > * @flags: gfp flag. > * Description: this function initializes the DMA RX/TX descriptors > - * and allocates the socket buffers. It suppors the chained and ring > + * and allocates the socket buffers. It supports the chained and ring > * modes. > */ > static int init_dma_desc_rings(struct net_device *dev, gfp_t flags) > @@ -2515,7 +2515,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit) > if (unlikely(status == discard_frame)) { > priv->dev->stats.rx_errors++; > if (priv->hwts_rx_en && !priv->extend_desc) { > - /* DESC2 & DESC3 will be overwitten by device > + /* DESC2 & DESC3 will be overwritten by device > * with timestamp value, hence reinitialize > * them in stmmac_rx_refill() function so that > * device can reuse it. > @@ -2538,7 +2538,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit) > > frame_len = priv->hw->desc->get_rx_frame_len(p, coe); > > - /* If frame length is greather than skb buffer size > + /* If frame length is greater than skb buffer size > * (preallocated during init) then the packet is > * ignored > */ > @@ -2744,7 +2744,7 @@ static netdev_features_t stmmac_fix_features(struct net_device *dev, > /* Some GMAC devices have a bugged Jumbo frame support that > * needs to have the Tx COE disabled for oversized frames > * (due to limited buffer sizes). In this case we disable > - * the TX csum insertionin the TDES and not use SF. > + * the TX csum insertion in the TDES and not use SF. > */ > if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN)) > features &= ~NETIF_F_CSUM_MASK; > @@ -2971,7 +2971,7 @@ static int stmmac_sysfs_dma_cap_read(struct seq_file *seq, void *v) > (priv->dma_cap.hash_filter) ? "Y" : "N"); > seq_printf(seq, "\tMultiple MAC address registers: %s\n", > (priv->dma_cap.multi_addr) ? "Y" : "N"); > - seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfatces): %s\n", > + seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfaces): %s\n", > (priv->dma_cap.pcs) ? "Y" : "N"); > seq_printf(seq, "\tSMA (MDIO) Interface: %s\n", > (priv->dma_cap.sma_mdio) ? "Y" : "N"); > @@ -3508,7 +3508,7 @@ int stmmac_resume(struct device *dev) > priv->irq_wake = 0; > } else { > pinctrl_pm_select_default_state(priv->device); > - /* enable the clk prevously disabled */ > + /* enable the clk previously disabled */ > clk_enable(priv->stmmac_clk); > clk_enable(priv->pclk); > /* reset the phy so that it's ready */ > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c > index b0344c2..a1a469e 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c > @@ -198,7 +198,7 @@ int stmmac_mdio_reset(struct mii_bus *bus) > > /* This is a workaround for problems with the STE101P PHY. > * It doesn't complete its reset until at least one clock cycle > - * on MDC, so perform a dummy mdio read. To be upadted for GMAC4 > + * on MDC, so perform a dummy mdio read. To be updated for GMAC4 > * if needed. > */ > if (!priv->plat->has_gmac4) >