From: Heiner Kallweit <hkallweit1@gmail.com>
To: Hau <hau@realtek.com>, nic_swsd <nic_swsd@realtek.com>,
"andrew+netdev@lunn.ch" <andrew+netdev@lunn.ch>,
"davem@davemloft.net" <davem@davemloft.net>,
"edumazet@google.com" <edumazet@google.com>,
"kuba@kernel.org" <kuba@kernel.org>,
"pabeni@redhat.com" <pabeni@redhat.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH net-next] r8169: set EEE speed down ratio to 1
Date: Fri, 5 Sep 2025 21:57:18 +0200 [thread overview]
Message-ID: <f2cb249e-0e73-4c4f-b2ca-d3b3c71ece2d@gmail.com> (raw)
In-Reply-To: <9d8e60df8e4b464cb28c7e421b9df45a@realtek.com>
On 9/5/2025 3:43 PM, Hau wrote:
>>
>> On 9/4/2025 4:11 AM, ChunHao Lin wrote:
>>> EEE speed down ratio (mac ocp 0xe056[7:4]) is used to control EEE
>>> speed down rate. The larger this value is, the more power can save.
>>> But it actually save less power then expected, but will impact
>>> compatibility. So set it to 1 (mac ocp 0xe056[7:4] = 0) to improve
>> compatibility.
>>>
>> Hi Hau,
>>
>> what kind of speed is this referring to? Some clock, or link speed, or ..?
>> Is EEE speed down a Realtek-specific feature?
>>
>> Are there known issues with the values used currently? Depending on the
>> answer we might consider this a fix.
>>
> It means clock (MAC MCU) speed down. It is not from spec, so it is kind of Realtek specific feature.
> It may cause packet drop or interrupt loss (different hardware may have different issue).
>
Thanks, Hau!
>>
>>> Signed-off-by: ChunHao Lin <hau@realtek.com>
>>> ---
>>> drivers/net/ethernet/realtek/r8169_main.c | 6 +++---
>>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c
>>> b/drivers/net/ethernet/realtek/r8169_main.c
>>> index 9c601f271c02..e5427dfce268 100644
>>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>>> @@ -3409,7 +3409,7 @@ static void rtl_hw_start_8168h_1(struct
>> rtl8169_private *tp)
>>> r8168_mac_ocp_modify(tp, 0xd412, 0x0fff, sw_cnt_1ms_ini);
>>> }
>>>
>>> - r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0070);
>>> + r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
>>> r8168_mac_ocp_modify(tp, 0xe052, 0x6000, 0x8008);
>>> r8168_mac_ocp_modify(tp, 0xe0d6, 0x01ff, 0x017f);
>>> r8168_mac_ocp_modify(tp, 0xd420, 0x0fff, 0x047f); @@ -3514,7
>>> +3514,7 @@ static void rtl_hw_start_8117(struct rtl8169_private *tp)
>>> r8168_mac_ocp_modify(tp, 0xd412, 0x0fff, sw_cnt_1ms_ini);
>>> }
>>>
>>> - r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0070);
>>> + r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
>>> r8168_mac_ocp_write(tp, 0xea80, 0x0003);
>>> r8168_mac_ocp_modify(tp, 0xe052, 0x0000, 0x0009);
>>> r8168_mac_ocp_modify(tp, 0xd420, 0x0fff, 0x047f); @@ -3715,7
>>> +3715,7 @@ static void rtl_hw_start_8125_common(struct rtl8169_private
>> *tp)
>>> r8168_mac_ocp_modify(tp, 0xc0b4, 0x0000, 0x000c);
>>> r8168_mac_ocp_modify(tp, 0xeb6a, 0x00ff, 0x0033);
>>> r8168_mac_ocp_modify(tp, 0xeb50, 0x03e0, 0x0040);
>>> - r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0030);
>>> + r8168_mac_ocp_modify(tp, 0xe056, 0x00f0, 0x0000);
>>> r8168_mac_ocp_modify(tp, 0xe040, 0x1000, 0x0000);
>>> r8168_mac_ocp_modify(tp, 0xea1c, 0x0003, 0x0001);
>>> if (tp->mac_version == RTL_GIGA_MAC_VER_70 ||
>
next prev parent reply other threads:[~2025-09-05 19:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-04 2:11 [PATCH net-next] r8169: set EEE speed down ratio to 1 ChunHao Lin
2025-09-04 6:16 ` Heiner Kallweit
2025-09-05 13:43 ` Hau
2025-09-05 19:57 ` Heiner Kallweit [this message]
2025-09-05 19:56 ` Heiner Kallweit
2025-09-17 14:48 ` Hau
2025-09-17 17:17 ` Heiner Kallweit
2025-09-17 17:26 ` Hau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f2cb249e-0e73-4c4f-b2ca-d3b3c71ece2d@gmail.com \
--to=hkallweit1@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hau@realtek.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).