public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: javen <javen_xu@realsil.com.cn>,
	nic_swsd@realtek.com, andrew+netdev@lunn.ch, davem@davemloft.net,
	edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
	horms@kernel.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next v3] r8169: add support for RTL8125cp
Date: Mon, 2 Feb 2026 21:50:30 +0100	[thread overview]
Message-ID: <f54e4d2a-666c-444a-a79e-0df2ddec97d9@gmail.com> (raw)
In-Reply-To: <20260202105828.54-1-javen_xu@realsil.com.cn>

On 2/2/2026 11:58 AM, javen wrote:
> From: Javen Xu <javen_xu@realsil.com.cn>
> 
> This patch adds support for chip RTL8125cp. Its XID is 0x708. We apply
> different and firmware for RTL8125cp.
> 
> Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
> 
> ---
> v2: This patch fix one mistake on phy_modify_paged(phydev, 0xa43, 0x10,
> 0x0000, 0x1001) which is phy_modify_paged(phydev, 0xa43, 0x00, 0x0000, 0x1001) on patch v1.
> 
> v3: Set phy_modify_paged(phydev, 0xa43, 0x10, 0x0000, 0x0003), bit 0
> means 'link speed 10m PLL OFF', bit 1 means 'ALDPS PLL OFF', bit 2 means
> 'ENABLE ALDPS', bit 12 means 'ALDPS XTAL OFF'.

ALDPS is disabled two lines later in rtl8125cp_hw_phy_config().
So why bother with ALDPS settings if ALDPS is disabled anyway?

And a formal note:
A new version of a patch should be submitted >=24h later, to leave
time for further review comments.

> ---
>  drivers/net/ethernet/realtek/r8169.h          |  1 +
>  drivers/net/ethernet/realtek/r8169_main.c     |  6 +++++
>  .../net/ethernet/realtek/r8169_phy_config.c   | 22 +++++++++++++++++++
>  3 files changed, 29 insertions(+)
> 
> diff --git a/drivers/net/ethernet/realtek/r8169.h b/drivers/net/ethernet/realtek/r8169.h
> index aed4cf852091..0b9c1d4eb48b 100644
> --- a/drivers/net/ethernet/realtek/r8169.h
> +++ b/drivers/net/ethernet/realtek/r8169.h
> @@ -68,6 +68,7 @@ enum mac_version {
>  	RTL_GIGA_MAC_VER_61,
>  	RTL_GIGA_MAC_VER_63,
>  	RTL_GIGA_MAC_VER_64,
> +	RTL_GIGA_MAC_VER_65,
>  	RTL_GIGA_MAC_VER_66,
>  	RTL_GIGA_MAC_VER_70,
>  	RTL_GIGA_MAC_VER_80,
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> index 2f7d9809c373..d040f2074db6 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -60,6 +60,7 @@
>  #define FIRMWARE_8125D_2	"rtl_nic/rtl8125d-2.fw"
>  #define FIRMWARE_8125K_1	"rtl_nic/rtl8125k-1.fw"
>  #define FIRMWARE_8125BP_2	"rtl_nic/rtl8125bp-2.fw"
> +#define FIRMWARE_8125CP_1	"rtl_nic/rtl8125cp-1.fw"
>  #define FIRMWARE_9151A_1	"rtl_nic/rtl9151a-1.fw"
>  #define FIRMWARE_8126A_2	"rtl_nic/rtl8126a-2.fw"
>  #define FIRMWARE_8126A_3	"rtl_nic/rtl8126a-3.fw"
> @@ -112,6 +113,9 @@ static const struct rtl_chip_info {
>  	/* 8125BP family. */
>  	{ 0x7cf, 0x681,	RTL_GIGA_MAC_VER_66, "RTL8125BP", FIRMWARE_8125BP_2 },
>  
> +	/* 8125CP family*/
> +	{ 0x7cf, 0x708, RTL_GIGA_MAC_VER_65, "RTL8125CP", FIRMWARE_8125CP_1 },
> +
>  	/* 8125D family. */
>  	{ 0x7cf, 0x68b, RTL_GIGA_MAC_VER_64, "RTL9151A", FIRMWARE_9151A_1 },
>  	{ 0x7cf, 0x68a, RTL_GIGA_MAC_VER_64, "RTL8125K", FIRMWARE_8125K_1 },
> @@ -802,6 +806,7 @@ MODULE_FIRMWARE(FIRMWARE_8125D_1);
>  MODULE_FIRMWARE(FIRMWARE_8125D_2);
>  MODULE_FIRMWARE(FIRMWARE_8125K_1);
>  MODULE_FIRMWARE(FIRMWARE_8125BP_2);
> +MODULE_FIRMWARE(FIRMWARE_8125CP_1);
>  MODULE_FIRMWARE(FIRMWARE_9151A_1);
>  MODULE_FIRMWARE(FIRMWARE_8126A_2);
>  MODULE_FIRMWARE(FIRMWARE_8126A_3);
> @@ -4021,6 +4026,7 @@ static void rtl_hw_config(struct rtl8169_private *tp)
>  		[RTL_GIGA_MAC_VER_61] = rtl_hw_start_8125a_2,
>  		[RTL_GIGA_MAC_VER_63] = rtl_hw_start_8125b,
>  		[RTL_GIGA_MAC_VER_64] = rtl_hw_start_8125d,
> +		[RTL_GIGA_MAC_VER_65] = rtl_hw_start_8125d,
>  		[RTL_GIGA_MAC_VER_66] = rtl_hw_start_8125d,
>  		[RTL_GIGA_MAC_VER_70] = rtl_hw_start_8126a,
>  		[RTL_GIGA_MAC_VER_80] = rtl_hw_start_8127a,
> diff --git a/drivers/net/ethernet/realtek/r8169_phy_config.c b/drivers/net/ethernet/realtek/r8169_phy_config.c
> index 032d9d2cfa2a..a880df7c1f70 100644
> --- a/drivers/net/ethernet/realtek/r8169_phy_config.c
> +++ b/drivers/net/ethernet/realtek/r8169_phy_config.c
> @@ -1102,6 +1102,27 @@ static void rtl8125d_hw_phy_config(struct rtl8169_private *tp,
>  	rtl8125_config_eee_phy(phydev);
>  }
>  
> +static void rtl8125cp_hw_phy_config(struct rtl8169_private *tp,
> +				   struct phy_device *phydev)
> +{
> +	r8169_apply_firmware(tp);
> +	rtl8168g_enable_gphy_10m(phydev);
> +
> +	phy_modify_paged(phydev, 0xad0, 0x17, 0x007f, 0x000b);
> +	phy_modify_paged(phydev, 0xad7, 0x14, 0x0000, BIT(4));
> +	rtl8125_phy_param(phydev, 0x807f, 0xff00, 0x5300);
> +	r8168g_phy_param(phydev, 0x81b8, 0xffff, 0x00b4);
> +	r8168g_phy_param(phydev, 0x81ba, 0xffff, 0x00e4);
> +	r8168g_phy_param(phydev, 0x81c5, 0xffff, 0x0104);
> +	r8168g_phy_param(phydev, 0x81d0, 0xffff, 0x054d);
> +	phy_modify_paged(phydev, 0xa43, 0x10, 0x0000, 0x0003);
> +	phy_modify_paged(phydev, 0xa44, 0x11, 0x0000, BIT(7));
> +
> +	rtl8125_legacy_force_mode(phydev);
> +	rtl8168g_disable_aldps(phydev);
> +	rtl8125_config_eee_phy(phydev);
> +}
> +
>  static void rtl8125bp_hw_phy_config(struct rtl8169_private *tp,
>  				    struct phy_device *phydev)
>  {
> @@ -1344,6 +1365,7 @@ void r8169_hw_phy_config(struct rtl8169_private *tp, struct phy_device *phydev,
>  		[RTL_GIGA_MAC_VER_61] = rtl8125a_2_hw_phy_config,
>  		[RTL_GIGA_MAC_VER_63] = rtl8125b_hw_phy_config,
>  		[RTL_GIGA_MAC_VER_64] = rtl8125d_hw_phy_config,
> +		[RTL_GIGA_MAC_VER_65] = rtl8125cp_hw_phy_config,
>  		[RTL_GIGA_MAC_VER_66] = rtl8125bp_hw_phy_config,
>  		[RTL_GIGA_MAC_VER_70] = rtl8126a_hw_phy_config,
>  		[RTL_GIGA_MAC_VER_80] = rtl8127a_1_hw_phy_config,


  reply	other threads:[~2026-02-02 20:50 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-02 10:58 [PATCH net-next v3] r8169: add support for RTL8125cp javen
2026-02-02 20:50 ` Heiner Kallweit [this message]
2026-02-03  7:58   ` javen
2026-02-03 20:13     ` Heiner Kallweit
2026-02-04  7:09       ` javen
2026-02-02 23:54 ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f54e4d2a-666c-444a-a79e-0df2ddec97d9@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=javen_xu@realsil.com.cn \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox