[PATCH net-next 3/3] net: phy: aquantia: remove downshift warning now that phylib takes care

[Heiner Kallweit <hkallweit1@gmail.com>]

Now that phylib notifies the user of a downshift we can remove
this functionality from the driver.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/phy/aquantia_main.c | 25 +------------------------
 1 file changed, 1 insertion(+), 24 deletions(-)

diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index 31927b2c7..837d5eaf9 100644
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -290,17 +290,6 @@ static int aqr_read_status(struct phy_device *phydev)
 	return genphy_c45_read_status(phydev);
 }
 
-static int aqr107_read_downshift_event(struct phy_device *phydev)
-{
-	int val;
-
-	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS1);
-	if (val < 0)
-		return val;
-
-	return !!(val & MDIO_AN_TX_VEND_INT_STATUS1_DOWNSHIFT);
-}
-
 static int aqr107_read_rate(struct phy_device *phydev)
 {
 	int val;
@@ -377,13 +366,7 @@ static int aqr107_read_status(struct phy_device *phydev)
 		break;
 	}
 
-	val = aqr107_read_downshift_event(phydev);
-	if (val <= 0)
-		return val;
-
-	phydev_warn(phydev, "Downshift occurred! Cabling may be defective.\n");
-
-	/* Read downshifted rate from vendor register */
+	/* Read possibly downshifted rate from vendor register */
 	return aqr107_read_rate(phydev);
 }
 
@@ -506,9 +489,6 @@ static int aqr107_config_init(struct phy_device *phydev)
 	if (!ret)
 		aqr107_chip_info(phydev);
 
-	/* ensure that a latched downshift event is cleared */
-	aqr107_read_downshift_event(phydev);
-
 	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
 }
 
@@ -533,9 +513,6 @@ static int aqcs109_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	/* ensure that a latched downshift event is cleared */
-	aqr107_read_downshift_event(phydev);
-
 	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
 }
 
-- 
2.25.1