From: Grant Likely <grant.likely@secretlab.ca>
To: Liu Yu <yu.liu@freescale.com>
Cc: galak@kernel.crashing.org, davem@davemloft.net,
netdev@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 3/4] ucc_geth: update the tbi-phy setting
Date: Mon, 1 Feb 2010 15:00:21 -0700 [thread overview]
Message-ID: <fa686aa41002011400i7160f360offc5b788e82122ea@mail.gmail.com> (raw)
In-Reply-To: <1263456799-3306-3-git-send-email-yu.liu@freescale.com>
On Thu, Jan 14, 2010 at 1:13 AM, Liu Yu <yu.liu@freescale.com> wrote:
> Old method only set tbi-phy for eth0.
>
> Signed-off-by: Liu Yu <yu.liu@freescale.com>
> ---
> drivers/net/ucc_geth.c | 23 +++++++++++++++--------
> 1 files changed, 15 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
> index 750d86d..0e72013 100644
> --- a/drivers/net/ucc_geth.c
> +++ b/drivers/net/ucc_geth.c
> @@ -37,6 +37,7 @@
> #include <asm/qe.h>
> #include <asm/ucc.h>
> #include <asm/ucc_fast.h>
> +#include <asm/machdep.h>
>
> #include "ucc_geth.h"
> #include "fsl_pq_mdio.h"
> @@ -1334,7 +1335,7 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
> struct ucc_geth __iomem *ug_regs;
> struct ucc_fast __iomem *uf_regs;
> int ret_val;
> - u32 upsmr, maccfg2, tbiBaseAddress;
> + u32 upsmr, maccfg2;
> u16 value;
>
> ugeth_vdbg("%s: IN", __func__);
> @@ -1389,14 +1390,20 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
> /* Note that this depends on proper setting in utbipar register. */
> if ((ugeth->phy_interface == PHY_INTERFACE_MODE_TBI) ||
> (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
> - tbiBaseAddress = in_be32(&ug_regs->utbipar);
> - tbiBaseAddress &= UTBIPAR_PHY_ADDRESS_MASK;
> - tbiBaseAddress >>= UTBIPAR_PHY_ADDRESS_SHIFT;
> - value = ugeth->phydev->bus->read(ugeth->phydev->bus,
> - (u8) tbiBaseAddress, ENET_TBI_MII_CR);
> + struct ucc_geth_info *ug_info = ugeth->ug_info;
> + struct phy_device *tbiphy;
> +
> + if (!ug_info->tbi_node)
> + ugeth_warn("TBI mode requires that the device "
> + "tree specify a tbi-handle\n");
Shouldn't the driver avoid calling of_phy_find_device() if this error
path is taken?
> +
> + tbiphy = of_phy_find_device(ug_info->tbi_node);
> + if (!tbiphy)
> + ugeth_warn("Could not get TBI device\n");
> +
> + value = phy_read(tbiphy, ENET_TBI_MII_CR);
Ditto here; the code unconditionally tries to read the tbiphy, even if
it isn't there.
Looks wrong.
g.
> value &= ~0x1000; /* Turn off autonegotiation */
> - ugeth->phydev->bus->write(ugeth->phydev->bus,
> - (u8) tbiBaseAddress, ENET_TBI_MII_CR, value);
> + phy_write(tbiphy, ENET_TBI_MII_CR, value);
> }
>
> init_check_frame_length_mode(ug_info->lengthCheckRx, &ug_regs->maccfg2);
> --
> 1.6.4
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
next prev parent reply other threads:[~2010-02-01 22:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-14 8:13 [PATCH 1/4] dts/mpc8569mds: Cleanup tbi phy to support rtbi Liu Yu
2010-01-14 8:13 ` [PATCH 2/4] mpc8569mds: Add bscr setting for rtbi mode Liu Yu
2010-01-14 8:13 ` [PATCH 3/4] ucc_geth: update the tbi-phy setting Liu Yu
2010-01-14 8:13 ` [PATCH 4/4] phy: add RTBI mode for m88e1111 Liu Yu
2010-01-14 16:20 ` Kumar Gala
2010-01-15 2:49 ` Liu Yu-B13201
2010-01-21 9:18 ` David Miller
2010-02-01 22:00 ` Grant Likely [this message]
2010-02-01 21:57 ` [PATCH 2/4] mpc8569mds: Add bscr setting for rtbi mode Grant Likely
2010-02-02 5:57 ` Liu Yu-B13201
2010-02-01 21:46 ` [PATCH 1/4] dts/mpc8569mds: Cleanup tbi phy to support rtbi Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fa686aa41002011400i7160f360offc5b788e82122ea@mail.gmail.com \
--to=grant.likely@secretlab.ca \
--cc=davem@davemloft.net \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=netdev@vger.kernel.org \
--cc=yu.liu@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).