[PATCH net-next 2/4] net: fec: use new iterator phy_for_each

[Heiner Kallweit <hkallweit1@gmail.com>]

Use new iterator phy_for_each() to simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 1edcfaee6..d7c39ef2d 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2552,7 +2552,6 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	int err = -ENXIO;
 	u32 mii_speed, holdtime;
 	u32 bus_freq;
-	int addr;
 
 	/*
 	 * The i.MX28 dual fec interfaces are not equal.
@@ -2667,11 +2666,8 @@ static int fec_enet_mii_init(struct platform_device *pdev)
 	of_node_put(node);
 
 	/* find all the PHY devices on the bus and set mac_managed_pm to true */
-	for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
-		phydev = mdiobus_get_phy(fep->mii_bus, addr);
-		if (phydev)
-			phydev->mac_managed_pm = true;
-	}
+	phy_for_each(fep->mii_bus, phydev)
+		phydev->mac_managed_pm = true;
 
 	mii_cnt++;
 
-- 
2.51.1.dirty