From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Feldmann Subject: Jetway JAD3RTLANG, Daughter Board, 3x GigaBit LAN does not work correctly Date: Thu, 03 Mar 2011 22:02:40 +0100 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit To: netdev@vger.kernel.org Return-path: Received: from lo.gmane.org ([80.91.229.12]:32876 "EHLO lo.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756708Ab1CCVC1 (ORCPT ); Thu, 3 Mar 2011 16:02:27 -0500 Received: from list by lo.gmane.org with local (Exim 4.69) (envelope-from ) id 1PvFfG-0005hU-52 for netdev@vger.kernel.org; Thu, 03 Mar 2011 22:02:26 +0100 Received: from dslb-188-096-092-238.pools.arcor-ip.net ([188.96.92.238]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 03 Mar 2011 22:02:26 +0100 Received: from feldmann_markus by dslb-188-096-092-238.pools.arcor-ip.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 03 Mar 2011 22:02:26 +0100 Sender: netdev-owner@vger.kernel.org List-ID: Hi All, i have a mini-ITX server with the mainboard "Jetway JNF92-270-LF" with the daughterboard "Jetway JAD3RTLANG, 3x GigaBit LAN". My current kernel is 2.6.36.4 and i can only connect over one of the network interfaces of my daughterboard at the time. My loaded modules: http://pastebin.com/raw.php?i=C9u78SML And a list of pci devices: http://pastebin.com/raw.php?i=f00tTdEJ I am using a bridge br0 to bind all three interfaces eth1, eth2 and eth3 together: http://pastebin.com/raw.php?i=deUT7iVS Do i have to configure anything in my kernel to fit this daughterboard? regards Markus