From mboxrd@z Thu Jan 1 00:00:00 1970 From: feldmaus Subject: Re: no IPv6 Routers present Date: Thu, 12 Mar 2009 23:32:27 +0000 (UTC) Message-ID: References: <49B99811.6050304@hp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: netdev@vger.kernel.org Return-path: Received: from main.gmane.org ([80.91.229.2]:38204 "EHLO ciao.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750946AbZCLXcq (ORCPT ); Thu, 12 Mar 2009 19:32:46 -0400 Received: from list by ciao.gmane.org with local (Exim 4.43) id 1LhuOI-00005h-58 for netdev@vger.kernel.org; Thu, 12 Mar 2009 23:32:42 +0000 Received: from dslb-092-076-238-059.pools.arcor-ip.net ([92.76.238.59]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 12 Mar 2009 23:32:42 +0000 Received: from feldmann_markus by dslb-092-076-238-059.pools.arcor-ip.net with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 12 Mar 2009 23:32:42 +0000 Sender: netdev-owner@vger.kernel.org List-ID: Vlad Yasevich hp.com> writes: > You need to give more information about your interface configurations, > routes, and any firewall rules. First of all thank you for your answer, first i post my specifications if my system works well: /etc/network/interfaces: ######################################################################## auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp iface dsl-provider inet ppp pre-up /sbin/ifconfig eth0 up -arp 0 # line maintained by pppoeconf provider dsl-provider ######################################################################## $route -n ######################################################################## Ziel Router Genmask Flags Metric Ref Use Iface 92.76.224.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 ######################################################################## iptables -L -n -v --> firewall for --> firewall for --> Both firewall script will be started about: --> and stoped: --> I hope that is not to much. :-) I post next time a specification which failed ! In both firewall scripts i use: echo 1 >/proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -o "$DSLIF" -j MASQUERADE I am not sure whether this could let it fail, when both script will be executed ? Regards Markus