* [PATCH net-next v3 01/10] tools/net/ynl: remove extraneous plural from variable names
2025-02-06 9:26 [PATCH net-next v3 00/10] netlink: specs: add a spec for nl80211 wiphy Donald Hunter
@ 2025-02-06 9:26 ` Donald Hunter
2025-02-06 9:26 ` [PATCH net-next v3 02/10] tools/net/ynl: support decoding indexed arrays as enums Donald Hunter
` (8 subsequent siblings)
9 siblings, 0 replies; 18+ messages in thread
From: Donald Hunter @ 2025-02-06 9:26 UTC (permalink / raw)
To: netdev, Jakub Kicinski, David S. Miller, Eric Dumazet,
Paolo Abeni, Simon Horman, Johannes Berg, linux-wireless
Cc: donald.hunter, Donald Hunter
_decode_array_attr() uses variable subattrs in every branch when only
one branch decodes more than a single attribute.
Change the variable name to subattr in the branches that only decode a
single attribute so that the intent is more obvious.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
---
tools/net/ynl/pyynl/lib/ynl.py | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/tools/net/ynl/pyynl/lib/ynl.py b/tools/net/ynl/pyynl/lib/ynl.py
index 08f8bf89cfc2..8b39d8b1eaa8 100644
--- a/tools/net/ynl/pyynl/lib/ynl.py
+++ b/tools/net/ynl/pyynl/lib/ynl.py
@@ -644,15 +644,15 @@ class YnlFamily(SpecFamily):
subattrs = self._decode(NlAttrs(item.raw), attr_spec['nested-attributes'])
decoded.append({ item.type: subattrs })
elif attr_spec["sub-type"] == 'binary':
- subattrs = item.as_bin()
+ subattr = item.as_bin()
if attr_spec.display_hint:
- subattrs = self._formatted_string(subattrs, attr_spec.display_hint)
- decoded.append(subattrs)
+ subattr = self._formatted_string(subattr, attr_spec.display_hint)
+ decoded.append(subattr)
elif attr_spec["sub-type"] in NlAttr.type_formats:
- subattrs = item.as_scalar(attr_spec['sub-type'], attr_spec.byte_order)
+ subattr = item.as_scalar(attr_spec['sub-type'], attr_spec.byte_order)
if attr_spec.display_hint:
- subattrs = self._formatted_string(subattrs, attr_spec.display_hint)
- decoded.append(subattrs)
+ subattr = self._formatted_string(subattr, attr_spec.display_hint)
+ decoded.append(subattr)
else:
raise Exception(f'Unknown {attr_spec["sub-type"]} with name {attr_spec["name"]}')
return decoded
--
2.48.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH net-next v3 02/10] tools/net/ynl: support decoding indexed arrays as enums
2025-02-06 9:26 [PATCH net-next v3 00/10] netlink: specs: add a spec for nl80211 wiphy Donald Hunter
2025-02-06 9:26 ` [PATCH net-next v3 01/10] tools/net/ynl: remove extraneous plural from variable names Donald Hunter
@ 2025-02-06 9:26 ` Donald Hunter
2025-02-06 9:26 ` [PATCH net-next v3 03/10] tools/net/ynl: support rendering C array members to strings Donald Hunter
` (7 subsequent siblings)
9 siblings, 0 replies; 18+ messages in thread
From: Donald Hunter @ 2025-02-06 9:26 UTC (permalink / raw)
To: netdev, Jakub Kicinski, David S. Miller, Eric Dumazet,
Paolo Abeni, Simon Horman, Johannes Berg, linux-wireless
Cc: donald.hunter, Donald Hunter
When decoding an indexed-array with a scalar subtype, it is currently
only possible to add a display-hint. Add support for decoding each value
as an enum.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
---
tools/net/ynl/pyynl/lib/ynl.py | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/tools/net/ynl/pyynl/lib/ynl.py b/tools/net/ynl/pyynl/lib/ynl.py
index 8b39d8b1eaa8..b73e07f1f60c 100644
--- a/tools/net/ynl/pyynl/lib/ynl.py
+++ b/tools/net/ynl/pyynl/lib/ynl.py
@@ -650,7 +650,9 @@ class YnlFamily(SpecFamily):
decoded.append(subattr)
elif attr_spec["sub-type"] in NlAttr.type_formats:
subattr = item.as_scalar(attr_spec['sub-type'], attr_spec.byte_order)
- if attr_spec.display_hint:
+ if 'enum' in attr_spec:
+ subattr = self._decode_enum(subattr, attr_spec)
+ elif attr_spec.display_hint:
subattr = self._formatted_string(subattr, attr_spec.display_hint)
decoded.append(subattr)
else:
--
2.48.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH net-next v3 03/10] tools/net/ynl: support rendering C array members to strings
2025-02-06 9:26 [PATCH net-next v3 00/10] netlink: specs: add a spec for nl80211 wiphy Donald Hunter
2025-02-06 9:26 ` [PATCH net-next v3 01/10] tools/net/ynl: remove extraneous plural from variable names Donald Hunter
2025-02-06 9:26 ` [PATCH net-next v3 02/10] tools/net/ynl: support decoding indexed arrays as enums Donald Hunter
@ 2025-02-06 9:26 ` Donald Hunter
2025-02-06 9:26 ` [PATCH net-next v3 04/10] tools/net/ynl: accept IP string inputs Donald Hunter
` (6 subsequent siblings)
9 siblings, 0 replies; 18+ messages in thread
From: Donald Hunter @ 2025-02-06 9:26 UTC (permalink / raw)
To: netdev, Jakub Kicinski, David S. Miller, Eric Dumazet,
Paolo Abeni, Simon Horman, Johannes Berg, linux-wireless
Cc: donald.hunter, Donald Hunter
The nl80211 family encodes the list of supported ciphers as a C array of
u32 values. Add support for translating arrays of scalars into strings
for enum names and display hints.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
---
tools/net/ynl/pyynl/lib/ynl.py | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/tools/net/ynl/pyynl/lib/ynl.py b/tools/net/ynl/pyynl/lib/ynl.py
index b73e07f1f60c..62ce3340796f 100644
--- a/tools/net/ynl/pyynl/lib/ynl.py
+++ b/tools/net/ynl/pyynl/lib/ynl.py
@@ -627,6 +627,11 @@ class YnlFamily(SpecFamily):
decoded = self._decode_struct(attr.raw, attr_spec.struct_name)
elif attr_spec.sub_type:
decoded = attr.as_c_array(attr_spec.sub_type)
+ if 'enum' in attr_spec:
+ decoded = [ self._decode_enum(x, attr_spec) for x in decoded ]
+ elif attr_spec.display_hint:
+ decoded = [ self._formatted_string(x, attr_spec.display_hint)
+ for x in decoded ]
else:
decoded = attr.as_bin()
if attr_spec.display_hint:
--
2.48.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH net-next v3 04/10] tools/net/ynl: accept IP string inputs
2025-02-06 9:26 [PATCH net-next v3 00/10] netlink: specs: add a spec for nl80211 wiphy Donald Hunter
` (2 preceding siblings ...)
2025-02-06 9:26 ` [PATCH net-next v3 03/10] tools/net/ynl: support rendering C array members to strings Donald Hunter
@ 2025-02-06 9:26 ` Donald Hunter
2025-02-06 16:07 ` Jakub Kicinski
2025-02-06 9:26 ` [PATCH net-next v3 05/10] tools/net/ynl: add s8, s16 to valid scalars in ynl-gen-c Donald Hunter
` (5 subsequent siblings)
9 siblings, 1 reply; 18+ messages in thread
From: Donald Hunter @ 2025-02-06 9:26 UTC (permalink / raw)
To: netdev, Jakub Kicinski, David S. Miller, Eric Dumazet,
Paolo Abeni, Simon Horman, Johannes Berg, linux-wireless
Cc: donald.hunter, Donald Hunter
The ynl tool uses display-hint to know when to format IP addresses in
printed output, but not to parse IP addresses from --json input. Add
support for parsing ipv4 and ipv6 strings.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
---
tools/net/ynl/pyynl/lib/ynl.py | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/tools/net/ynl/pyynl/lib/ynl.py b/tools/net/ynl/pyynl/lib/ynl.py
index 62ce3340796f..dcc2c6b298d6 100644
--- a/tools/net/ynl/pyynl/lib/ynl.py
+++ b/tools/net/ynl/pyynl/lib/ynl.py
@@ -536,9 +536,11 @@ class YnlFamily(SpecFamily):
try:
return int(value)
except (ValueError, TypeError) as e:
- if 'enum' not in attr_spec:
- raise e
- return self._encode_enum(attr_spec, value)
+ if 'enum' in attr_spec:
+ return self._encode_enum(attr_spec, value)
+ if attr_spec.display_hint:
+ return self._from_string(value, attr_spec)
+ raise e
def _add_attr(self, space, name, value, search_attrs):
try:
@@ -571,7 +573,10 @@ class YnlFamily(SpecFamily):
if isinstance(value, bytes):
attr_payload = value
elif isinstance(value, str):
- attr_payload = bytes.fromhex(value)
+ if attr.display_hint:
+ attr_payload = self._from_string(value, attr)
+ else:
+ attr_payload = bytes.fromhex(value)
elif isinstance(value, dict) and attr.struct_name:
attr_payload = self._encode_struct(attr.struct_name, value)
else:
@@ -906,6 +911,18 @@ class YnlFamily(SpecFamily):
formatted = raw
return formatted
+ def _from_string(self, string, attr_spec):
+ if attr_spec.display_hint in ['ipv4', 'ipv6']:
+ ip = ipaddress.ip_address(string)
+ if attr_spec['type'] == 'binary':
+ raw = ip.packed
+ else:
+ raw = int(ip)
+ else:
+ raise Exception(f"Display hint '{attr_spec.display_hint}' not implemented"
+ f" when parsing '{attr_spec['name']}'")
+ return raw
+
def handle_ntf(self, decoded):
msg = dict()
if self.include_raw:
--
2.48.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH net-next v3 04/10] tools/net/ynl: accept IP string inputs
2025-02-06 9:26 ` [PATCH net-next v3 04/10] tools/net/ynl: accept IP string inputs Donald Hunter
@ 2025-02-06 16:07 ` Jakub Kicinski
0 siblings, 0 replies; 18+ messages in thread
From: Jakub Kicinski @ 2025-02-06 16:07 UTC (permalink / raw)
To: Donald Hunter
Cc: netdev, David S. Miller, Eric Dumazet, Paolo Abeni, Simon Horman,
Johannes Berg, linux-wireless, donald.hunter
On Thu, 6 Feb 2025 09:26:52 +0000 Donald Hunter wrote:
> The ynl tool uses display-hint to know when to format IP addresses in
> printed output, but not to parse IP addresses from --json input. Add
> support for parsing ipv4 and ipv6 strings.
Acked-by: Jakub Kicinski <kuba@kernel.org>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH net-next v3 05/10] tools/net/ynl: add s8, s16 to valid scalars in ynl-gen-c
2025-02-06 9:26 [PATCH net-next v3 00/10] netlink: specs: add a spec for nl80211 wiphy Donald Hunter
` (3 preceding siblings ...)
2025-02-06 9:26 ` [PATCH net-next v3 04/10] tools/net/ynl: accept IP string inputs Donald Hunter
@ 2025-02-06 9:26 ` Donald Hunter
2025-02-06 16:07 ` Jakub Kicinski
2025-02-06 9:26 ` [PATCH net-next v3 06/10] tools/net/ynl: sanitise enums with leading digits " Donald Hunter
` (4 subsequent siblings)
9 siblings, 1 reply; 18+ messages in thread
From: Donald Hunter @ 2025-02-06 9:26 UTC (permalink / raw)
To: netdev, Jakub Kicinski, David S. Miller, Eric Dumazet,
Paolo Abeni, Simon Horman, Johannes Berg, linux-wireless
Cc: donald.hunter, Donald Hunter
Add the missing s8 and s16 scalar types to the list of recognised
scalars in ynl-gen-c.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
---
tools/net/ynl/pyynl/ynl_gen_c.py | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/net/ynl/pyynl/ynl_gen_c.py b/tools/net/ynl/pyynl/ynl_gen_c.py
index c2eabc90dce8..803d49bf7c33 100755
--- a/tools/net/ynl/pyynl/ynl_gen_c.py
+++ b/tools/net/ynl/pyynl/ynl_gen_c.py
@@ -1437,7 +1437,7 @@ class CodeWriter:
self._ifdef_block = config_option
-scalars = {'u8', 'u16', 'u32', 'u64', 's32', 's64', 'uint', 'sint'}
+scalars = {'u8', 'u16', 'u32', 'u64', 's8', 's16', 's32', 's64', 'uint', 'sint'}
direction_to_suffix = {
'reply': '_rsp',
--
2.48.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH net-next v3 05/10] tools/net/ynl: add s8, s16 to valid scalars in ynl-gen-c
2025-02-06 9:26 ` [PATCH net-next v3 05/10] tools/net/ynl: add s8, s16 to valid scalars in ynl-gen-c Donald Hunter
@ 2025-02-06 16:07 ` Jakub Kicinski
0 siblings, 0 replies; 18+ messages in thread
From: Jakub Kicinski @ 2025-02-06 16:07 UTC (permalink / raw)
To: Donald Hunter
Cc: netdev, David S. Miller, Eric Dumazet, Paolo Abeni, Simon Horman,
Johannes Berg, linux-wireless, donald.hunter
On Thu, 6 Feb 2025 09:26:53 +0000 Donald Hunter wrote:
> Add the missing s8 and s16 scalar types to the list of recognised
> scalars in ynl-gen-c.
Acked-by: Jakub Kicinski <kuba@kernel.org>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH net-next v3 06/10] tools/net/ynl: sanitise enums with leading digits in ynl-gen-c
2025-02-06 9:26 [PATCH net-next v3 00/10] netlink: specs: add a spec for nl80211 wiphy Donald Hunter
` (4 preceding siblings ...)
2025-02-06 9:26 ` [PATCH net-next v3 05/10] tools/net/ynl: add s8, s16 to valid scalars in ynl-gen-c Donald Hunter
@ 2025-02-06 9:26 ` Donald Hunter
2025-02-06 16:10 ` Jakub Kicinski
2025-02-06 9:26 ` [PATCH net-next v3 07/10] tools/net/ynl: add indexed-array scalar support to ynl-gen-c Donald Hunter
` (3 subsequent siblings)
9 siblings, 1 reply; 18+ messages in thread
From: Donald Hunter @ 2025-02-06 9:26 UTC (permalink / raw)
To: netdev, Jakub Kicinski, David S. Miller, Eric Dumazet,
Paolo Abeni, Simon Horman, Johannes Berg, linux-wireless
Cc: donald.hunter, Donald Hunter
Turn attribute names with leading digits into valid C names by
prepending an underscore, e.g. 5ghz -> _5ghz
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
---
tools/net/ynl/pyynl/ynl_gen_c.py | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/net/ynl/pyynl/ynl_gen_c.py b/tools/net/ynl/pyynl/ynl_gen_c.py
index 803d49bf7c33..1316a4fe798a 100755
--- a/tools/net/ynl/pyynl/ynl_gen_c.py
+++ b/tools/net/ynl/pyynl/ynl_gen_c.py
@@ -45,6 +45,8 @@ class BaseNlLib:
class Type(SpecAttr):
+ starts_with_digit = re.compile(r"^\d")
+
def __init__(self, family, attr_set, attr, value):
super().__init__(family, attr_set, attr, value)
@@ -74,6 +76,8 @@ class Type(SpecAttr):
self.c_name = c_lower(self.name)
if self.c_name in _C_KW:
self.c_name += '_'
+ if self.starts_with_digit.match(self.c_name):
+ self.c_name = '_' + self.c_name
# Added by resolve():
self.enum_name = None
--
2.48.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH net-next v3 06/10] tools/net/ynl: sanitise enums with leading digits in ynl-gen-c
2025-02-06 9:26 ` [PATCH net-next v3 06/10] tools/net/ynl: sanitise enums with leading digits " Donald Hunter
@ 2025-02-06 16:10 ` Jakub Kicinski
2025-02-07 9:24 ` Donald Hunter
0 siblings, 1 reply; 18+ messages in thread
From: Jakub Kicinski @ 2025-02-06 16:10 UTC (permalink / raw)
To: Donald Hunter
Cc: netdev, David S. Miller, Eric Dumazet, Paolo Abeni, Simon Horman,
Johannes Berg, linux-wireless, donald.hunter
On Thu, 6 Feb 2025 09:26:54 +0000 Donald Hunter wrote:
> class Type(SpecAttr):
> + starts_with_digit = re.compile(r"^\d")
> +
> def __init__(self, family, attr_set, attr, value):
> super().__init__(family, attr_set, attr, value)
>
> @@ -74,6 +76,8 @@ class Type(SpecAttr):
> self.c_name = c_lower(self.name)
> if self.c_name in _C_KW:
> self.c_name += '_'
> + if self.starts_with_digit.match(self.c_name):
> + self.c_name = '_' + self.c_name
bit heavyweight with the regex? I think this would do:
if self.c_name[0].isdigit():
but either way:
Acked-by: Jakub Kicinski <kuba@kernel.org>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH net-next v3 06/10] tools/net/ynl: sanitise enums with leading digits in ynl-gen-c
2025-02-06 16:10 ` Jakub Kicinski
@ 2025-02-07 9:24 ` Donald Hunter
0 siblings, 0 replies; 18+ messages in thread
From: Donald Hunter @ 2025-02-07 9:24 UTC (permalink / raw)
To: Jakub Kicinski
Cc: netdev, David S. Miller, Eric Dumazet, Paolo Abeni, Simon Horman,
Johannes Berg, linux-wireless, donald.hunter
Jakub Kicinski <kuba@kernel.org> writes:
> On Thu, 6 Feb 2025 09:26:54 +0000 Donald Hunter wrote:
>> class Type(SpecAttr):
>> + starts_with_digit = re.compile(r"^\d")
>> +
>> def __init__(self, family, attr_set, attr, value):
>> super().__init__(family, attr_set, attr, value)
>>
>> @@ -74,6 +76,8 @@ class Type(SpecAttr):
>> self.c_name = c_lower(self.name)
>> if self.c_name in _C_KW:
>> self.c_name += '_'
>> + if self.starts_with_digit.match(self.c_name):
>> + self.c_name = '_' + self.c_name
>
> bit heavyweight with the regex? I think this would do:
>
> if self.c_name[0].isdigit():
Agreed. I'll use the simpler method.
> but either way:
>
> Acked-by: Jakub Kicinski <kuba@kernel.org>
TY.
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH net-next v3 07/10] tools/net/ynl: add indexed-array scalar support to ynl-gen-c
2025-02-06 9:26 [PATCH net-next v3 00/10] netlink: specs: add a spec for nl80211 wiphy Donald Hunter
` (5 preceding siblings ...)
2025-02-06 9:26 ` [PATCH net-next v3 06/10] tools/net/ynl: sanitise enums with leading digits " Donald Hunter
@ 2025-02-06 9:26 ` Donald Hunter
2025-02-06 16:12 ` Jakub Kicinski
2025-02-06 9:26 ` [PATCH net-next v3 08/10] netlink: specs: support nested structs in genetlink legacy Donald Hunter
` (2 subsequent siblings)
9 siblings, 1 reply; 18+ messages in thread
From: Donald Hunter @ 2025-02-06 9:26 UTC (permalink / raw)
To: netdev, Jakub Kicinski, David S. Miller, Eric Dumazet,
Paolo Abeni, Simon Horman, Johannes Berg, linux-wireless
Cc: donald.hunter, Donald Hunter
Extend ynl-gen-c.py with support for indexed-array that has a scalar
sub-type.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
---
tools/net/ynl/pyynl/ynl_gen_c.py | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/tools/net/ynl/pyynl/ynl_gen_c.py b/tools/net/ynl/pyynl/ynl_gen_c.py
index 1316a4fe798a..7e6454185310 100755
--- a/tools/net/ynl/pyynl/ynl_gen_c.py
+++ b/tools/net/ynl/pyynl/ynl_gen_c.py
@@ -687,7 +687,10 @@ class TypeArrayNest(Type):
raise Exception(f"Sub-type {self.attr['sub-type']} not supported yet")
def _attr_typol(self):
- return f'.type = YNL_PT_NEST, .nest = &{self.nested_render_name}_nest, '
+ if self.attr['sub-type'] in scalars:
+ return f'.type = YNL_PT_U{c_upper(self.sub_type[1:])}, '
+ else:
+ return f'.type = YNL_PT_NEST, .nest = &{self.nested_render_name}_nest, '
def _attr_get(self, ri, var):
local_vars = ['const struct nlattr *attr2;']
@@ -889,7 +892,7 @@ class AttrSet(SpecAttrSet):
elif elem['type'] == 'nest':
t = TypeNest(self.family, self, elem, value)
elif elem['type'] == 'indexed-array' and 'sub-type' in elem:
- if elem["sub-type"] == 'nest':
+ if elem["sub-type"] in ['nest', 'u32']:
t = TypeArrayNest(self.family, self, elem, value)
else:
raise Exception(f'new_attr: unsupported sub-type {elem["sub-type"]}')
@@ -1673,6 +1676,9 @@ def _multi_parse(ri, struct, init_lines, local_vars):
if aspec["sub-type"] == 'nest':
local_vars.append(f'const struct nlattr *attr_{aspec.c_name};')
array_nests.add(arg)
+ elif aspec['sub-type'] in scalars:
+ local_vars.append(f'const struct nlattr *attr_{aspec.c_name};')
+ array_nests.add(arg)
else:
raise Exception(f'Not supported sub-type {aspec["sub-type"]}')
if 'multi-attr' in aspec:
@@ -1728,11 +1734,17 @@ def _multi_parse(ri, struct, init_lines, local_vars):
ri.cw.p(f"dst->{aspec.c_name} = calloc(n_{aspec.c_name}, sizeof(*dst->{aspec.c_name}));")
ri.cw.p(f"dst->n_{aspec.c_name} = n_{aspec.c_name};")
ri.cw.p('i = 0;')
- ri.cw.p(f"parg.rsp_policy = &{aspec.nested_render_name}_nest;")
+ if 'nested-attributes' in aspec:
+ ri.cw.p(f"parg.rsp_policy = &{aspec.nested_render_name}_nest;")
ri.cw.block_start(line=f"ynl_attr_for_each_nested(attr, attr_{aspec.c_name})")
- ri.cw.p(f"parg.data = &dst->{aspec.c_name}[i];")
- ri.cw.p(f"if ({aspec.nested_render_name}_parse(&parg, attr, ynl_attr_type(attr)))")
- ri.cw.p('return YNL_PARSE_CB_ERROR;')
+ if 'nested-attributes' in aspec:
+ ri.cw.p(f"parg.data = &dst->{aspec.c_name}[i];")
+ ri.cw.p(f"if ({aspec.nested_render_name}_parse(&parg, attr, ynl_attr_type(attr)))")
+ ri.cw.p('return YNL_PARSE_CB_ERROR;')
+ elif aspec.sub_type in scalars:
+ ri.cw.p(f"dst->{aspec.c_name}[i] = ynl_attr_get_{aspec.sub_type}(attr);")
+ else:
+ raise Exception(f"Nest parsing type not supported in {aspec['name']}")
ri.cw.p('i++;')
ri.cw.block_end()
ri.cw.block_end()
--
2.48.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH net-next v3 08/10] netlink: specs: support nested structs in genetlink legacy
2025-02-06 9:26 [PATCH net-next v3 00/10] netlink: specs: add a spec for nl80211 wiphy Donald Hunter
` (6 preceding siblings ...)
2025-02-06 9:26 ` [PATCH net-next v3 07/10] tools/net/ynl: add indexed-array scalar support to ynl-gen-c Donald Hunter
@ 2025-02-06 9:26 ` Donald Hunter
2025-02-06 9:26 ` [PATCH net-next v3 09/10] netlink: specs: add s8, s16 to genetlink schemas Donald Hunter
2025-02-06 9:26 ` [PATCH net-next v3 10/10] netlink: specs: wireless: add a spec for nl80211 Donald Hunter
9 siblings, 0 replies; 18+ messages in thread
From: Donald Hunter @ 2025-02-06 9:26 UTC (permalink / raw)
To: netdev, Jakub Kicinski, David S. Miller, Eric Dumazet,
Paolo Abeni, Simon Horman, Johannes Berg, linux-wireless
Cc: donald.hunter, Donald Hunter
Nested structs are already supported in netlink-raw. Add the same
capability to the genetlink legacy schema.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
---
Documentation/netlink/genetlink-legacy.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/netlink/genetlink-legacy.yaml b/Documentation/netlink/genetlink-legacy.yaml
index 16380e12cabe..7520f63ec3d2 100644
--- a/Documentation/netlink/genetlink-legacy.yaml
+++ b/Documentation/netlink/genetlink-legacy.yaml
@@ -151,6 +151,9 @@ properties:
the right formatting mechanism when displaying values of this
type.
enum: [ hex, mac, fddi, ipv4, ipv6, uuid ]
+ struct:
+ description: Name of the nested struct type.
+ type: string
# End genetlink-legacy
attribute-sets:
--
2.48.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH net-next v3 09/10] netlink: specs: add s8, s16 to genetlink schemas
2025-02-06 9:26 [PATCH net-next v3 00/10] netlink: specs: add a spec for nl80211 wiphy Donald Hunter
` (7 preceding siblings ...)
2025-02-06 9:26 ` [PATCH net-next v3 08/10] netlink: specs: support nested structs in genetlink legacy Donald Hunter
@ 2025-02-06 9:26 ` Donald Hunter
2025-02-06 9:26 ` [PATCH net-next v3 10/10] netlink: specs: wireless: add a spec for nl80211 Donald Hunter
9 siblings, 0 replies; 18+ messages in thread
From: Donald Hunter @ 2025-02-06 9:26 UTC (permalink / raw)
To: netdev, Jakub Kicinski, David S. Miller, Eric Dumazet,
Paolo Abeni, Simon Horman, Johannes Berg, linux-wireless
Cc: donald.hunter, Donald Hunter
Add s8 and s16 types to the genetlink schemas to align scalar types
across all schemas.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
---
Documentation/netlink/genetlink-c.yaml | 2 +-
Documentation/netlink/genetlink-legacy.yaml | 2 +-
Documentation/netlink/genetlink.yaml | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/netlink/genetlink-c.yaml b/Documentation/netlink/genetlink-c.yaml
index 9660ffb1ed6a..1cfc8073a120 100644
--- a/Documentation/netlink/genetlink-c.yaml
+++ b/Documentation/netlink/genetlink-c.yaml
@@ -160,7 +160,7 @@ properties:
type: string
type: &attr-type
enum: [ unused, pad, flag, binary,
- uint, sint, u8, u16, u32, u64, s32, s64,
+ uint, sint, u8, u16, u32, u64, s8, s16, s32, s64,
string, nest, indexed-array, nest-type-value ]
doc:
description: Documentation of the attribute.
diff --git a/Documentation/netlink/genetlink-legacy.yaml b/Documentation/netlink/genetlink-legacy.yaml
index 7520f63ec3d2..f98ed12a09c0 100644
--- a/Documentation/netlink/genetlink-legacy.yaml
+++ b/Documentation/netlink/genetlink-legacy.yaml
@@ -206,7 +206,7 @@ properties:
type: &attr-type
description: The netlink attribute type
enum: [ unused, pad, flag, binary, bitfield32,
- uint, sint, u8, u16, u32, u64, s32, s64,
+ uint, sint, u8, u16, u32, u64, s8, s16, s32, s64,
string, nest, indexed-array, nest-type-value ]
doc:
description: Documentation of the attribute.
diff --git a/Documentation/netlink/genetlink.yaml b/Documentation/netlink/genetlink.yaml
index b036227b46f1..11c1592d49be 100644
--- a/Documentation/netlink/genetlink.yaml
+++ b/Documentation/netlink/genetlink.yaml
@@ -123,7 +123,7 @@ properties:
type: string
type: &attr-type
enum: [ unused, pad, flag, binary,
- uint, sint, u8, u16, u32, u64, s32, s64,
+ uint, sint, u8, u16, u32, u64, s8, s16, s32, s64,
string, nest, indexed-array, nest-type-value ]
doc:
description: Documentation of the attribute.
--
2.48.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH net-next v3 10/10] netlink: specs: wireless: add a spec for nl80211
2025-02-06 9:26 [PATCH net-next v3 00/10] netlink: specs: add a spec for nl80211 wiphy Donald Hunter
` (8 preceding siblings ...)
2025-02-06 9:26 ` [PATCH net-next v3 09/10] netlink: specs: add s8, s16 to genetlink schemas Donald Hunter
@ 2025-02-06 9:26 ` Donald Hunter
2025-02-06 9:43 ` Johannes Berg
9 siblings, 1 reply; 18+ messages in thread
From: Donald Hunter @ 2025-02-06 9:26 UTC (permalink / raw)
To: netdev, Jakub Kicinski, David S. Miller, Eric Dumazet,
Paolo Abeni, Simon Horman, Johannes Berg, linux-wireless
Cc: donald.hunter, Donald Hunter
Add a rudimentary YNL spec for nl80211 that covers get-wiphy,
get-interface and get-protocol-features.
./tools/net/ynl/pyynl/cli.py --family nl80211 \
--do get-protocol-features
{'protocol-features': {'split-wiphy-dump'}}
./tools/net/ynl/pyynl/cli.py --family nl80211 \
--dump get-wiphy --json '{ "split-wiphy-dump": true }'
./tools/net/ynl/pyynl/cli.py --family nl80211 \
--dump get-interface
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
---
Documentation/netlink/specs/nl80211.yaml | 2000 ++++++++++++++++++++++
tools/net/ynl/Makefile.deps | 1 +
2 files changed, 2001 insertions(+)
create mode 100644 Documentation/netlink/specs/nl80211.yaml
diff --git a/Documentation/netlink/specs/nl80211.yaml b/Documentation/netlink/specs/nl80211.yaml
new file mode 100644
index 000000000000..789a709bbd94
--- /dev/null
+++ b/Documentation/netlink/specs/nl80211.yaml
@@ -0,0 +1,2000 @@
+# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)
+
+name: nl80211
+protocol: genetlink-legacy
+
+doc:
+ Netlink API for 802.11 wireless devices
+
+definitions:
+ -
+ name: commands
+ type: enum
+ entries:
+ - unspec
+ - get-wiphy
+ - set-wiphy
+ - new-wiphy
+ - del-wiphy
+ - get-interface
+ - set-interface
+ - new-interface
+ - del-interface
+ - get-key
+ - set-key
+ - new-key
+ - del-key
+ - get-beacon
+ - set-beacon
+ - new-beacon
+ - del-beacon
+ - get-station
+ - set-station
+ - new-station
+ - del-station
+ - get-mpath
+ - set-mpath
+ - new-mpath
+ - del-mpath
+ - set-bss
+ - set-reg
+ - req-set-reg
+ - get-mesh-config
+ - set-mesh-config
+ - set-mgmt-extra-ie
+ - get-reg
+ - get-scan
+ - trigger-scan
+ - new-scan-results
+ - scan-aborted
+ - reg-change
+ - authenticate
+ - associate
+ - deauthenticate
+ - disassociate
+ - michael-mic-failure
+ - reg-beacon-hint
+ - join-ibss
+ - leave-ibss
+ - testmode
+ - connect
+ - roam
+ - disconnect
+ - set-wiphy-netns
+ - get-survey
+ - new-survey-results
+ - set-pmksa
+ - del-pmksa
+ - flush-pmksa
+ - remain-on-channel
+ - cancel-remain-on-channel
+ - set-tx-bitrate-mask
+ - register-action
+ - action
+ - action-tx-status
+ - set-power-save
+ - get-power-save
+ - set-cqm
+ - notify-cqm
+ - set-channel
+ - set-wds-peer
+ - frame-wait-cancel
+ - join-mesh
+ - leave-mesh
+ - unprot-deauthenticate
+ - unprot-disassociate
+ - new-peer-candidate
+ - get-wowlan
+ - set-wowlan
+ - start-sched-scan
+ - stop-sched-scan
+ - sched-scan-results
+ - sched-scan-stopped
+ - set-rekey-offload
+ - pmksa-candidate
+ - tdls-oper
+ - tdls-mgmt
+ - unexpected-frame
+ - probe-client
+ - register-beacons
+ - unexpected-4-addr-frame
+ - set-noack-map
+ - ch-switch-notify
+ - start-p2p-device
+ - stop-p2p-device
+ - conn-failed
+ - set-mcast-rate
+ - set-mac-acl
+ - radar-detect
+ - get-protocol-features
+ - update-ft-ies
+ - ft-event
+ - crit-protocol-start
+ - crit-protocol-stop
+ - get-coalesce
+ - set-coalesce
+ - channel-switch
+ - vendor
+ - set-qos-map
+ - add-tx-ts
+ - del-tx-ts
+ - get-mpp
+ - join-ocb
+ - leave-ocb
+ - ch-switch-started-notify
+ - tdls-channel-switch
+ - tdls-cancel-channel-switch
+ - wiphy-reg-change
+ - abort-scan
+ - start-nan
+ - stop-nan
+ - add-nan-function
+ - del-nan-function
+ - change-nan-config
+ - nan-match
+ - set-multicast-to-unicast
+ - update-connect-params
+ - set-pmk
+ - del-pmk
+ - port-authorized
+ - reload-regdb
+ - external-auth
+ - sta-opmode-changed
+ - control-port-frame
+ - get-ftm-responder-stats
+ - peer-measurement-start
+ - peer-measurement-result
+ - peer-measurement-complete
+ - notify-radar
+ - update-owe-info
+ - probe-mesh-link
+ - set-tid-config
+ - unprot-beacon
+ - control-port-frame-tx-status
+ - set-sar-specs
+ - obss-color-collision
+ - color-change-request
+ - color-change-started
+ - color-change-aborted
+ - color-change-completed
+ - set-fils-aad
+ - assoc-comeback
+ - add-link
+ - remove-link
+ - add-link-sta
+ - modify-link-sta
+ - remove-link-sta
+ - set-hw-timestamp
+ - links-removed
+ - set-tid-to-link-mapping
+ -
+ name: feature-flags
+ type: flags
+ entries:
+ - sk-tx-status
+ - ht-ibss
+ - inactivity-timer
+ - cell-base-reg-hints
+ - p2p-device-needs-channel
+ - sae
+ - low-priority-scan
+ - scan-flush
+ - ap-scan
+ - vif-txpower
+ - need-obss-scan
+ - p2p-go-ctwin
+ - p2p-go-oppps
+ - reserved
+ - advertise-chan-limits
+ - full-ap-client-state
+ - userspace-mpm
+ - active-monitor
+ - ap-mode-chan-width-change
+ - ds-param-set-ie-in-probes
+ - wfa-tpc-ie-in-proves
+ - quiet
+ - tx-power-insertion
+ - ackto-estimation
+ - static-smps
+ - dynamic-smps
+ - supports-wmm-admission
+ - mac-on-create
+ - tdls-channel-switch
+ - scan-random-mac-addr
+ - sched-scan-random-mac-addr
+ - no-random-mac-addr
+ -
+ name: ieee80211-mcs-info
+ type: struct
+ members:
+ -
+ name: rx-mask
+ type: binary
+ len: 10
+ -
+ name: rx-highest
+ type: u16
+ byte-order: little-endian
+ -
+ name: tx-params
+ type: u8
+ -
+ name: reserved
+ type: binary
+ len: 3
+ -
+ name: ieee80211-vht-mcs-info
+ type: struct
+ members:
+ -
+ name: rx-mcs-map
+ type: u16
+ byte-order: little-endian
+ -
+ name: rx-highest
+ type: u16
+ byte-order: little-endian
+ -
+ name: tx-mcs-map
+ type: u16
+ byte-order: little-endian
+ -
+ name: tx-highest
+ type: u16
+ byte-order: little-endian
+ -
+ name: ieee80211-ht-cap
+ type: struct
+ members:
+ -
+ name: cap-info
+ type: u16
+ byte-order: little-endian
+ -
+ name: ampdu-params-info
+ type: u8
+ -
+ name: mcs
+ type: binary
+ struct: ieee80211-mcs-info
+ -
+ name: extended-ht-cap-info
+ type: u16
+ byte-order: little-endian
+ -
+ name: tx-bf-cap-info
+ type: u32
+ byte-order: little-endian
+ -
+ name: antenna-selection-info
+ type: u8
+ -
+ name: channel-type
+ type: enum
+ entries:
+ - no-ht
+ - ht20
+ - ht40minus
+ - ht40plus
+ -
+ name: sta-flag-update
+ type: struct
+ members:
+ -
+ name: mask
+ type: u32
+ -
+ name: set
+ type: u32
+ -
+ name: protocol-features
+ type: flags
+ entries:
+ - split-wiphy-dump
+
+attribute-sets:
+ -
+ name: nl80211-attrs
+ name-prefix: nl80211-attr-
+ enum-name: nl80211-attrs
+ attr-max-name: num-nl80211-attr
+ attributes:
+ -
+ name: wiphy
+ type: u32
+ -
+ name: wiphy-name
+ type: string
+ -
+ name: ifindex
+ type: u32
+ -
+ name: ifname
+ type: string
+ -
+ name: iftype
+ type: u32
+ -
+ name: mac
+ type: binary
+ display-hint: mac
+ -
+ name: key-data
+ type: binary
+ -
+ name: key-idx
+ type: u8
+ -
+ name: key-cipher
+ type: u32
+ -
+ name: key-seq
+ type: binary
+ -
+ name: key-default
+ type: flag
+ -
+ name: beacon-interval
+ type: u32
+ -
+ name: dtim-period
+ type: u32
+ -
+ name: beacon-head
+ type: binary
+ -
+ name: beacon-tail
+ type: binary
+ -
+ name: sta-aid
+ type: u16
+ -
+ name: sta-flags
+ type: binary # TODO: nest
+ -
+ name: sta-listen-interval
+ type: u16
+ -
+ name: sta-supported-rates
+ type: binary
+ -
+ name: sta-vlan
+ type: u32
+ -
+ name: sta-info
+ type: binary # TODO: nest
+ -
+ name: wiphy-bands
+ type: nest
+ nested-attributes: wiphy-bands
+ -
+ name: mntr-flags
+ type: binary # TODO: nest
+ -
+ name: mesh-id
+ type: binary
+ -
+ name: sta-plink-action
+ type: u8
+ -
+ name: mpath-next-hop
+ type: binary
+ display-hint: mac
+ -
+ name: mpath-info
+ type: binary # TODO: nest
+ -
+ name: bss-cts-prot
+ type: u8
+ -
+ name: bss-short-preamble
+ type: u8
+ -
+ name: bss-short-slot-time
+ type: u8
+ -
+ name: ht-capability
+ type: binary
+ -
+ name: supported-iftypes
+ type: nest
+ nested-attributes: supported-iftypes
+ -
+ name: reg-alpha2
+ type: binary
+ -
+ name: reg-rules
+ type: binary # TODO: nest
+ -
+ name: mesh-config
+ type: binary # TODO: nest
+ -
+ name: bss-basic-rates
+ type: binary
+ -
+ name: wiphy-txq-params
+ type: binary # TODO: nest
+ -
+ name: wiphy-freq
+ type: u32
+ -
+ name: wiphy-channel-type
+ type: u32
+ enum: channel-type
+ -
+ name: key-default-mgmt
+ type: flag
+ -
+ name: mgmt-subtype
+ type: u8
+ -
+ name: ie
+ type: binary
+ -
+ name: max-num-scan-ssids
+ type: u8
+ -
+ name: scan-frequencies
+ type: binary # TODO: nest
+ -
+ name: scan-ssids
+ type: binary # TODO: nest
+ -
+ name: generation
+ type: u32
+ -
+ name: bss
+ type: binary # TODO: nest
+ -
+ name: reg-initiator
+ type: u8
+ -
+ name: reg-type
+ type: u8
+ -
+ name: supported-commands
+ type: indexed-array
+ sub-type: u32
+ enum: commands
+ -
+ name: frame
+ type: binary
+ -
+ name: ssid
+ type: binary
+ -
+ name: auth-type
+ type: u32
+ -
+ name: reason-code
+ type: u16
+ -
+ name: key-type
+ type: u32
+ -
+ name: max-scan-ie-len
+ type: u16
+ -
+ name: cipher-suites
+ type: binary
+ sub-type: u32
+ display-hint: hex
+ -
+ name: freq-before
+ type: binary # TODO: nest
+ -
+ name: freq-after
+ type: binary # TODO: nest
+ -
+ name: freq-fixed
+ type: flag
+ -
+ name: wiphy-retry-short
+ type: u8
+ -
+ name: wiphy-retry-long
+ type: u8
+ -
+ name: wiphy-frag-threshold
+ type: u32
+ -
+ name: wiphy-rts-threshold
+ type: u32
+ -
+ name: timed-out
+ type: flag
+ -
+ name: use-mfp
+ type: u32
+ -
+ name: sta-flags2
+ type: binary
+ struct: sta-flag-update
+ -
+ name: control-port
+ type: flag
+ -
+ name: testdata
+ type: binary
+ -
+ name: privacy
+ type: flag
+ -
+ name: disconnected-by-ap
+ type: flag
+ -
+ name: status-code
+ type: u16
+ -
+ name: cipher-suites-pairwise
+ type: binary
+ -
+ name: cipher-suite-group
+ type: u32
+ -
+ name: wpa-versions
+ type: u32
+ -
+ name: akm-suites
+ type: binary
+ -
+ name: req-ie
+ type: binary
+ -
+ name: resp-ie
+ type: binary
+ -
+ name: prev-bssid
+ type: binary
+ -
+ name: key
+ type: binary # TODO: nest
+ -
+ name: keys
+ type: binary # TODO: nest
+ -
+ name: pid
+ type: u32
+ -
+ name: 4addr
+ type: u8
+ -
+ name: survey-info
+ type: binary # TODO: nest
+ -
+ name: pmkid
+ type: binary
+ -
+ name: max-num-pmkids
+ type: u8
+ -
+ name: duration
+ type: u32
+ -
+ name: cookie
+ type: u64
+ -
+ name: wiphy-coverage-class
+ type: u8
+ -
+ name: tx-rates
+ type: binary # TODO: nest
+ -
+ name: frame-match
+ type: binary
+ -
+ name: ack
+ type: flag
+ -
+ name: ps-state
+ type: u32
+ -
+ name: cqm
+ type: binary # TODO: nest
+ -
+ name: local-state-change
+ type: flag
+ -
+ name: ap-isolate
+ type: u8
+ -
+ name: wiphy-tx-power-setting
+ type: u32
+ -
+ name: wiphy-tx-power-level
+ type: u32
+ -
+ name: tx-frame-types
+ type: nest
+ nested-attributes: nl80211-iftype-attrs
+ -
+ name: rx-frame-types
+ type: nest
+ nested-attributes: nl80211-iftype-attrs
+ -
+ name: frame-type
+ type: u16
+ -
+ name: control-port-ethertype
+ type: flag
+ -
+ name: control-port-no-encrypt
+ type: flag
+ -
+ name: support-ibss-rsn
+ type: flag
+ -
+ name: wiphy-antenna-tx
+ type: u32
+ -
+ name: wiphy-antenna-rx
+ type: u32
+ -
+ name: mcast-rate
+ type: u32
+ -
+ name: offchannel-tx-ok
+ type: flag
+ -
+ name: bss-ht-opmode
+ type: u16
+ -
+ name: key-default-types
+ type: binary # TODO: nest
+ -
+ name: max-remain-on-channel-duration
+ type: u32
+ -
+ name: mesh-setup
+ type: binary # TODO: nest
+ -
+ name: wiphy-antenna-avail-tx
+ type: u32
+ -
+ name: wiphy-antenna-avail-rx
+ type: u32
+ -
+ name: support-mesh-auth
+ type: flag
+ -
+ name: sta-plink-state
+ type: u8
+ -
+ name: wowlan-triggers
+ type: binary # TODO: nest
+ -
+ name: wowlan-triggers-supported
+ type: nest
+ nested-attributes: wowlan-triggers-attrs
+ -
+ name: sched-scan-interval
+ type: u32
+ -
+ name: interface-combinations
+ type: indexed-array
+ sub-type: nest
+ nested-attributes: if-combination-attributes
+ -
+ name: software-iftypes
+ type: nest
+ nested-attributes: supported-iftypes
+ -
+ name: rekey-data
+ type: binary # TODO: nest
+ -
+ name: max-num-sched-scan-ssids
+ type: u8
+ -
+ name: max-sched-scan-ie-len
+ type: u16
+ -
+ name: scan-supp-rates
+ type: binary # TODO: nest
+ -
+ name: hidden-ssid
+ type: u32
+ -
+ name: ie-probe-resp
+ type: binary
+ -
+ name: ie-assoc-resp
+ type: binary
+ -
+ name: sta-wme
+ type: binary # TODO: nest
+ -
+ name: support-ap-uapsd
+ type: flag
+ -
+ name: roam-support
+ type: flag
+ -
+ name: sched-scan-match
+ type: binary # TODO: nest
+ -
+ name: max-match-sets
+ type: u8
+ -
+ name: pmksa-candidate
+ type: binary # TODO: nest
+ -
+ name: tx-no-cck-rate
+ type: flag
+ -
+ name: tdls-action
+ type: u8
+ -
+ name: tdls-dialog-token
+ type: u8
+ -
+ name: tdls-operation
+ type: u8
+ -
+ name: tdls-support
+ type: flag
+ -
+ name: tdls-external-setup
+ type: flag
+ -
+ name: device-ap-sme
+ type: u32
+ -
+ name: dont-wait-for-ack
+ type: flag
+ -
+ name: feature-flags
+ type: u32
+ enum: feature-flags
+ enum-as-flags: True
+ -
+ name: probe-resp-offload
+ type: u32
+ -
+ name: probe-resp
+ type: binary
+ -
+ name: dfs-region
+ type: u8
+ -
+ name: disable-ht
+ type: flag
+ -
+ name: ht-capability-mask
+ type: binary
+ struct: ieee80211-ht-cap
+ -
+ name: noack-map
+ type: u16
+ -
+ name: inactivity-timeout
+ type: u16
+ -
+ name: rx-signal-dbm
+ type: u32
+ -
+ name: bg-scan-period
+ type: u16
+ -
+ name: wdev
+ type: u64
+ -
+ name: user-reg-hint-type
+ type: u32
+ -
+ name: conn-failed-reason
+ type: u32
+ -
+ name: auth-data
+ type: binary
+ -
+ name: vht-capability
+ type: binary
+ -
+ name: scan-flags
+ type: u32
+ -
+ name: channel-width
+ type: u32
+ -
+ name: center-freq1
+ type: u32
+ -
+ name: center-freq2
+ type: u32
+ -
+ name: p2p-ctwindow
+ type: u8
+ -
+ name: p2p-oppps
+ type: u8
+ -
+ name: local-mesh-power-mode
+ type: u32
+ -
+ name: acl-policy
+ type: u32
+ -
+ name: mac-addrs
+ type: binary # TODO: nest
+ -
+ name: mac-acl-max
+ type: u32
+ -
+ name: radar-event
+ type: u32
+ -
+ name: ext-capa
+ type: binary
+ -
+ name: ext-capa-mask
+ type: binary
+ -
+ name: sta-capability
+ type: u16
+ -
+ name: sta-ext-capability
+ type: binary
+ -
+ name: protocol-features
+ type: u32
+ enum: protocol-features
+ -
+ name: split-wiphy-dump
+ type: flag
+ -
+ name: disable-vht
+ type: flag
+ -
+ name: vht-capability-mask
+ type: binary
+ -
+ name: mdid
+ type: u16
+ -
+ name: ie-ric
+ type: binary
+ -
+ name: crit-prot-id
+ type: u16
+ -
+ name: max-crit-prot-duration
+ type: u16
+ -
+ name: peer-aid
+ type: u16
+ -
+ name: coalesce-rule
+ type: binary # TODO: nest
+ -
+ name: ch-switch-count
+ type: u32
+ -
+ name: ch-switch-block-tx
+ type: flag
+ -
+ name: csa-ies
+ type: binary # TODO: nest
+ -
+ name: cntdwn-offs-beacon
+ type: binary
+ -
+ name: cntdwn-offs-presp
+ type: binary
+ -
+ name: rxmgmt-flags
+ type: binary
+ -
+ name: sta-supported-channels
+ type: binary
+ -
+ name: sta-supported-oper-classes
+ type: binary
+ -
+ name: handle-dfs
+ type: flag
+ -
+ name: support-5-mhz
+ type: flag
+ -
+ name: support-10-mhz
+ type: flag
+ -
+ name: opmode-notif
+ type: u8
+ -
+ name: vendor-id
+ type: u32
+ -
+ name: vendor-subcmd
+ type: u32
+ -
+ name: vendor-data
+ type: binary
+ -
+ name: vendor-events
+ type: binary
+ -
+ name: qos-map
+ type: binary
+ -
+ name: mac-hint
+ type: binary
+ display-hint: mac
+ -
+ name: wiphy-freq-hint
+ type: u32
+ -
+ name: max-ap-assoc-sta
+ type: u32
+ -
+ name: tdls-peer-capability
+ type: u32
+ -
+ name: socket-owner
+ type: flag
+ -
+ name: csa-c-offsets-tx
+ type: binary
+ -
+ name: max-csa-counters
+ type: u8
+ -
+ name: tdls-initiator
+ type: flag
+ -
+ name: use-rrm
+ type: flag
+ -
+ name: wiphy-dyn-ack
+ type: flag
+ -
+ name: tsid
+ type: u8
+ -
+ name: user-prio
+ type: u8
+ -
+ name: admitted-time
+ type: u16
+ -
+ name: smps-mode
+ type: u8
+ -
+ name: oper-class
+ type: u8
+ -
+ name: mac-mask
+ type: binary
+ display-hint: mac
+ -
+ name: wiphy-self-managed-reg
+ type: flag
+ -
+ name: ext-features
+ type: binary
+ -
+ name: survey-radio-stats
+ type: binary
+ -
+ name: netns-fd
+ type: u32
+ -
+ name: sched-scan-delay
+ type: u32
+ -
+ name: reg-indoor
+ type: flag
+ -
+ name: max-num-sched-scan-plans
+ type: u32
+ -
+ name: max-scan-plan-interval
+ type: u32
+ -
+ name: max-scan-plan-iterations
+ type: u32
+ -
+ name: sched-scan-plans
+ type: binary # TODO: nest
+ -
+ name: pbss
+ type: flag
+ -
+ name: bss-select
+ type: binary # TODO: nest
+ -
+ name: sta-support-p2p-ps
+ type: u8
+ -
+ name: pad
+ type: binary
+ -
+ name: iftype-ext-capa
+ type: binary # TODO: nest
+ -
+ name: mu-mimo-group-data
+ type: binary
+ -
+ name: mu-mimo-follow-mac-addr
+ type: binary
+ display-hint: mac
+ -
+ name: scan-start-time-tsf
+ type: u64
+ -
+ name: scan-start-time-tsf-bssid
+ type: binary
+ -
+ name: measurement-duration
+ type: u16
+ -
+ name: measurement-duration-mandatory
+ type: flag
+ -
+ name: mesh-peer-aid
+ type: u16
+ -
+ name: nan-master-pref
+ type: u8
+ -
+ name: bands
+ type: u32
+ -
+ name: nan-func
+ type: binary # TODO: nest
+ -
+ name: nan-match
+ type: binary # TODO: nest
+ -
+ name: fils-kek
+ type: binary
+ -
+ name: fils-nonces
+ type: binary
+ -
+ name: multicast-to-unicast-enabled
+ type: flag
+ -
+ name: bssid
+ type: binary
+ display-hint: mac
+ -
+ name: sched-scan-relative-rssi
+ type: s8
+ -
+ name: sched-scan-rssi-adjust
+ type: binary
+ -
+ name: timeout-reason
+ type: u32
+ -
+ name: fils-erp-username
+ type: binary
+ -
+ name: fils-erp-realm
+ type: binary
+ -
+ name: fils-erp-next-seq-num
+ type: u16
+ -
+ name: fils-erp-rrk
+ type: binary
+ -
+ name: fils-cache-id
+ type: binary
+ -
+ name: pmk
+ type: binary
+ -
+ name: sched-scan-multi
+ type: flag
+ -
+ name: sched-scan-max-reqs
+ type: u32
+ -
+ name: want-1x-4way-hs
+ type: flag
+ -
+ name: pmkr0-name
+ type: binary
+ -
+ name: port-authorized
+ type: binary
+ -
+ name: external-auth-action
+ type: u32
+ -
+ name: external-auth-support
+ type: flag
+ -
+ name: nss
+ type: u8
+ -
+ name: ack-signal
+ type: s32
+ -
+ name: control-port-over-nl80211
+ type: flag
+ -
+ name: txq-stats
+ type: nest
+ nested-attributes: txq-stats-attrs
+ -
+ name: txq-limit
+ type: u32
+ -
+ name: txq-memory-limit
+ type: u32
+ -
+ name: txq-quantum
+ type: u32
+ -
+ name: he-capability
+ type: binary
+ -
+ name: ftm-responder
+ type: binary # TODO: nest
+ -
+ name: ftm-responder-stats
+ type: binary # TODO: nest
+ -
+ name: timeout
+ type: u32
+ -
+ name: peer-measurements
+ type: binary # TODO: nest
+ -
+ name: airtime-weight
+ type: u16
+ -
+ name: sta-tx-power-setting
+ type: u8
+ -
+ name: sta-tx-power
+ type: s16
+ -
+ name: sae-password
+ type: binary
+ -
+ name: twt-responder
+ type: flag
+ -
+ name: he-obss-pd
+ type: binary # TODO: nest
+ -
+ name: wiphy-edmg-channels
+ type: u8
+ -
+ name: wiphy-edmg-bw-config
+ type: u8
+ -
+ name: vlan-id
+ type: u16
+ -
+ name: he-bss-color
+ type: binary # TODO: nest
+ -
+ name: iftype-akm-suites
+ type: binary # TODO: nest
+ -
+ name: tid-config
+ type: binary # TODO: nest
+ -
+ name: control-port-no-preauth
+ type: flag
+ -
+ name: pmk-lifetime
+ type: u32
+ -
+ name: pmk-reauth-threshold
+ type: u8
+ -
+ name: receive-multicast
+ type: flag
+ -
+ name: wiphy-freq-offset
+ type: u32
+ -
+ name: center-freq1-offset
+ type: u32
+ -
+ name: scan-freq-khz
+ type: binary # TODO: nest
+ -
+ name: he-6ghz-capability
+ type: binary
+ -
+ name: fils-discovery
+ type: binary # TOOD: nest
+ -
+ name: unsol-bcast-probe-resp
+ type: binary # TOOD: nest
+ -
+ name: s1g-capability
+ type: binary
+ -
+ name: s1g-capability-mask
+ type: binary
+ -
+ name: sae-pwe
+ type: u8
+ -
+ name: reconnect-requested
+ type: binary
+ -
+ name: sar-spec
+ type: nest
+ nested-attributes: sar-attributes
+ -
+ name: disable-he
+ type: flag
+ -
+ name: obss-color-bitmap
+ type: u64
+ -
+ name: color-change-count
+ type: u8
+ -
+ name: color-change-color
+ type: u8
+ -
+ name: color-change-elems
+ type: binary # TODO: nest
+ -
+ name: mbssid-config
+ type: binary # TODO: nest
+ -
+ name: mbssid-elems
+ type: binary # TODO: nest
+ -
+ name: radar-background
+ type: flag
+ -
+ name: ap-settings-flags
+ type: u32
+ -
+ name: eht-capability
+ type: binary
+ -
+ name: disable-eht
+ type: flag
+ -
+ name: mlo-links
+ type: binary # TODO: nest
+ -
+ name: mlo-link-id
+ type: u8
+ -
+ name: mld-addr
+ type: binary
+ display-hint: mac
+ -
+ name: mlo-support
+ type: flag
+ -
+ name: max-num-akm-suites
+ type: binary
+ -
+ name: eml-capability
+ type: u16
+ -
+ name: mld-capa-and-ops
+ type: u16
+ -
+ name: tx-hw-timestamp
+ type: u64
+ -
+ name: rx-hw-timestamp
+ type: u64
+ -
+ name: td-bitmap
+ type: binary
+ -
+ name: punct-bitmap
+ type: u32
+ -
+ name: max-hw-timestamp-peers
+ type: u16
+ -
+ name: hw-timestamp-enabled
+ type: flag
+ -
+ name: ema-rnr-elems
+ type: binary # TODO: nest
+ -
+ name: mlo-link-disabled
+ type: flag
+ -
+ name: bss-dump-include-use-data
+ type: flag
+ -
+ name: mlo-ttlm-dlink
+ type: u16
+ -
+ name: mlo-ttlm-ulink
+ type: u16
+ -
+ name: assoc-spp-amsdu
+ type: flag
+ -
+ name: wiphy-radios
+ type: binary # TODO: nest
+ -
+ name: wiphy-interface-combinations
+ type: binary # TODO: nest
+ -
+ name: vif-radio-mask
+ type: u32
+ -
+ name: frame-type-attrs
+ subset-of: nl80211-attrs
+ attributes:
+ -
+ name: frame-type
+ -
+ name: wiphy-bands
+ name-prefix: nl80211-band-
+ attr-max-name: num-nl80211-bands
+ attributes:
+ -
+ name: 2ghz
+ doc: 2.4 GHz ISM band
+ value: 0
+ type: nest
+ nested-attributes: band-attrs
+ -
+ name: 5ghz
+ doc: around 5 GHz band (4.9 - 5.7 GHz)
+ type: nest
+ nested-attributes: band-attrs
+ -
+ name: 60ghz
+ doc: around 60 GHz band (58.32 - 69.12 GHz)
+ type: nest
+ nested-attributes: band-attrs
+ -
+ name: 6ghz
+ type: nest
+ nested-attributes: band-attrs
+ -
+ name: s1ghz
+ type: nest
+ nested-attributes: band-attrs
+ -
+ name: lc
+ type: nest
+ nested-attributes: band-attrs
+ -
+ name: band-attrs
+ enum-name: nl80211-band-attr
+ name-prefix: nl80211-band-attr-
+ attributes:
+ -
+ name: freqs
+ type: indexed-array
+ sub-type: nest
+ nested-attributes: frequency-attrs
+ -
+ name: rates
+ type: indexed-array
+ sub-type: nest
+ nested-attributes: bitrate-attrs
+ -
+ name: ht-mcs-set
+ type: binary
+ struct: ieee80211-mcs-info
+ -
+ name: ht-capa
+ type: u16
+ -
+ name: ht-ampdu-factor
+ type: u8
+ -
+ name: ht-ampdu-density
+ type: u8
+ -
+ name: vht-mcs-set
+ type: binary
+ struct: ieee80211-vht-mcs-info
+ -
+ name: vht-capa
+ type: u32
+ -
+ name: iftype-data
+ type: indexed-array
+ sub-type: nest
+ nested-attributes: iftype-data-attrs
+ -
+ name: edmg-channels
+ type: binary
+ -
+ name: edmg-bw-config
+ type: binary
+ -
+ name: s1g-mcs-nss-set
+ type: binary
+ -
+ name: s1g-capa
+ type: binary
+ -
+ name: bitrate-attrs
+ name-prefix: nl80211-bitrate-attr-
+ attributes:
+ -
+ name: rate
+ type: u32
+ -
+ name: 2ghz-shortpreamble
+ type: flag
+ -
+ name: frequency-attrs
+ name-prefix: nl80211-frequency-attr-
+ attributes:
+ -
+ name: freq
+ type: u32
+ -
+ name: disabled
+ type: flag
+ -
+ name: no-ir
+ type: flag
+ -
+ name: no-ibss
+ name-prefix: __nl80211-frequency-attr-
+ type: flag
+ -
+ name: radar
+ type: flag
+ -
+ name: max-tx-power
+ type: u32
+ -
+ name: dfs-state
+ type: u32
+ -
+ name: dfs-time
+ type: binary
+ -
+ name: no-ht40-minus
+ type: binary
+ -
+ name: no-ht40-plus
+ type: binary
+ -
+ name: no-80mhz
+ type: binary
+ -
+ name: no-160mhz
+ type: binary
+ -
+ name: dfs-cac-time
+ type: binary
+ -
+ name: indoor-only
+ type: binary
+ -
+ name: ir-concurrent
+ type: binary
+ -
+ name: no-20mhz
+ type: binary
+ -
+ name: no-10mhz
+ type: binary
+ -
+ name: wmm
+ type: indexed-array
+ sub-type: nest
+ nested-attributes: wmm-attrs
+ -
+ name: no-he
+ type: binary
+ -
+ name: offset
+ type: u32
+ -
+ name: 1mhz
+ type: binary
+ -
+ name: 2mhz
+ type: binary
+ -
+ name: 4mhz
+ type: binary
+ -
+ name: 8mhz
+ type: binary
+ -
+ name: 16mhz
+ type: binary
+ -
+ name: no-320mhz
+ type: binary
+ -
+ name: no-eht
+ type: binary
+ -
+ name: psd
+ type: binary
+ -
+ name: dfs-concurrent
+ type: binary
+ -
+ name: no-6ghz-vlp-client
+ type: binary
+ -
+ name: no-6ghz-afc-client
+ type: binary
+ -
+ name: can-monitor
+ type: binary
+ -
+ name: allow-6ghz-vlp-ap
+ type: binary
+ -
+ name: if-combination-attributes
+ enum-name: nl80211-if-combination-attrs
+ name-prefix: nl80211-iface-comb-
+ attr-max-name: max-nl80211-iface-comb
+ attributes:
+ -
+ name: limits
+ type: indexed-array
+ sub-type: nest
+ nested-attributes: iface-limit-attributes
+ -
+ name: maxnum
+ type: u32
+ -
+ name: sta-ap-bi-match
+ type: flag
+ -
+ name: num-channels
+ type: u32
+ -
+ name: radar-detect-widths
+ type: u32
+ -
+ name: radar-detect-regions
+ type: u32
+ -
+ name: bi-min-gcd
+ type: u32
+ -
+ name: iface-limit-attributes
+ enum-name: nl80211-iface-limit-attrs
+ name-prefix: nl80211-iface-limit-
+ attr-max-name: max-nl80211-iface-limit
+ attributes:
+ -
+ name: max
+ type: u32
+ -
+ name: types
+ type: nest
+ nested-attributes: supported-iftypes
+ -
+ name: iftype-data-attrs
+ name-prefix: nl80211-band-iftype-attr-
+ attributes:
+ -
+ name: iftypes
+ type: binary
+ -
+ name: he-cap-mac
+ type: binary
+ -
+ name: he-cap-phy
+ type: binary
+ -
+ name: he-cap-mcs-set
+ type: binary
+ -
+ name: he-cap-ppe
+ type: binary
+ -
+ name: he-6ghz-capa
+ type: binary
+ -
+ name: vendor-elems
+ type: binary
+ -
+ name: eht-cap-mac
+ type: binary
+ -
+ name: eht-cap-phy
+ type: binary
+ -
+ name: eht-cap-mcs-set
+ type: binary
+ -
+ name: eht-cap-ppe
+ type: binary
+ -
+ name: nl80211-iftype-attrs
+ enum-name: nl80211-iftype
+ name-prefix: nl80211-iftype-
+ attributes:
+ -
+ name: unspecified
+ type: nest
+ value: 0
+ nested-attributes: frame-type-attrs
+ -
+ name: adhoc
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: station
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: ap
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: ap-vlan
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: wds
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: monitor
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: mesh-point
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: p2p-client
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: p2p-go
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: p2p-device
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: ocb
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: nan
+ type: nest
+ nested-attributes: frame-type-attrs
+ -
+ name: sar-attributes
+ enum-name: nl80211-sar-attrs
+ name-prefix: nl80211-sar-attr-
+ attributes:
+ -
+ name: type
+ type: u32
+ -
+ name: specs
+ type: indexed-array
+ sub-type: nest
+ nested-attributes: sar-specs
+ -
+ name: sar-specs
+ enum-name: nl80211-sar-specs-attrs
+ name-prefix: nl80211-sar-attr-specs-
+ attributes:
+ -
+ name: power
+ type: s32
+ -
+ name: range-index
+ type: u32
+ -
+ name: start-freq
+ type: u32
+ -
+ name: end-freq
+ type: u32
+ -
+ name: supported-iftypes
+ enum-name: nl80211-iftype
+ name-prefix: nl80211-iftype-
+ attributes:
+ -
+ name: adhoc
+ type: flag
+ -
+ name: station
+ type: flag
+ -
+ name: ap
+ type: flag
+ -
+ name: ap-vlan
+ type: flag
+ -
+ name: wds
+ type: flag
+ -
+ name: monitor
+ type: flag
+ -
+ name: mesh-point
+ type: flag
+ -
+ name: p2p-client
+ type: flag
+ -
+ name: p2p-go
+ type: flag
+ -
+ name: p2p-device
+ type: flag
+ -
+ name: ocb
+ type: flag
+ -
+ name: nan
+ type: flag
+ -
+ name: txq-stats-attrs
+ name-prefix: nl80211-txq-stats-
+ attributes:
+ -
+ name: backlog-bytes
+ type: u32
+ -
+ name: backlog-packets
+ type: u32
+ -
+ name: flows
+ type: u32
+ -
+ name: drops
+ type: u32
+ -
+ name: ecn-marks
+ type: u32
+ -
+ name: overlimit
+ type: u32
+ -
+ name: overmemory
+ type: u32
+ -
+ name: collisions
+ type: u32
+ -
+ name: tx-bytes
+ type: u32
+ -
+ name: tx-packets
+ type: u32
+ -
+ name: max-flows
+ type: u32
+ -
+ name: wmm-attrs
+ enum-name: nl80211-wmm-rule
+ name-prefix: nl80211-wmmr-
+ attributes:
+ -
+ name: cw-min
+ type: u16
+ -
+ name: cw-max
+ type: u16
+ -
+ name: aifsn
+ type: u8
+ -
+ name: txop
+ type: u16
+ -
+ name: wowlan-triggers-attrs
+ enum-name: nl80211-wowlan-triggers
+ name-prefix: nl80211-wowlan-trig-
+ attr-max-name: max-nl80211-wowlan-trig
+ attributes:
+ -
+ name: any
+ type: flag
+ -
+ name: disconnect
+ type: flag
+ -
+ name: magic-pkt
+ type: flag
+ -
+ name: pkt-pattern
+ type: flag
+ -
+ name: gtk-rekey-supported
+ type: flag
+ -
+ name: gtk-rekey-failure
+ type: flag
+ -
+ name: eap-ident-request
+ type: flag
+ -
+ name: 4way-handshake
+ type: flag
+ -
+ name: rfkill-release
+ type: flag
+ -
+ name: wakeup-pkt-80211
+ type: flag
+ -
+ name: wakeup-pkt-80211-len
+ type: flag
+ -
+ name: wakeup-pkt-8023
+ type: flag
+ -
+ name: wakeup-pkt-8023-len
+ type: flag
+ -
+ name: tcp-connection
+ type: flag
+ -
+ name: wakeup-tcp-match
+ type: flag
+ -
+ name: wakeup-tcp-connlost
+ type: flag
+ -
+ name: wakeup-tcp-nomoretokens
+ type: flag
+ -
+ name: net-detect
+ type: flag
+ -
+ name: net-detect-results
+ type: flag
+ -
+ name: unprotected-deauth-disassoc
+ type: flag
+
+operations:
+ enum-model: directional
+ list:
+ -
+ name: get-wiphy
+ doc: |
+ Get information about a wiphy or dump a list of all wiphys. Requests to dump get-wiphy
+ should unconditionally include the split-wiphy-dump flag in the request.
+ attribute-set: nl80211-attrs
+ do:
+ request:
+ value: 1
+ attributes:
+ - wiphy
+ - wdev
+ - ifindex
+ reply:
+ value: 3
+ attributes: &wiphy-reply-attrs
+ - bands
+ - cipher-suites
+ - control-port-ethertype
+ - ext-capa
+ - ext-capa-mask
+ - ext-features
+ - feature-flags
+ - generation
+ - ht-capability-mask
+ - interface-combinations
+ - mac
+ - max-csa-counters
+ - max-match-sets
+ - max-num-akm-suites
+ - max-num-pmkids
+ - max-num-scan-ssids
+ - max-num-sched-scan-plans
+ - max-num-sched-scan-ssids
+ - max-remain-on-channel-duration
+ - max-scan-ie-len
+ - max-scan-plan-interval
+ - max-scan-plan-iterations
+ - max-sched-scan-ie-len
+ - offchannel-tx-ok
+ - rx-frame-types
+ - sar-spec
+ - sched-scan-max-reqs
+ - software-iftypes
+ - support-ap-uapsd
+ - supported-commands
+ - supported-iftypes
+ - tdls-external-setup
+ - tdls-support
+ - tx-frame-types
+ - txq-limit
+ - txq-memory-limit
+ - txq-quantum
+ - txq-stats
+ - vht-capability-mask
+ - wiphy
+ - wiphy-antenna-avail-rx
+ - wiphy-antenna-avail-tx
+ - wiphy-antenna-rx
+ - wiphy-antenna-tx
+ - wiphy-bands
+ - wiphy-coverage-class
+ - wiphy-frag-threshold
+ - wiphy-name
+ - wiphy-retry-long
+ - wiphy-retry-short
+ - wiphy-rts-threshold
+ - wowlan-triggers-supported
+ dump:
+ request:
+ attributes:
+ - wiphy
+ - wdev
+ - ifindex
+ - split-wiphy-dump
+ reply:
+ attributes: *wiphy-reply-attrs
+ -
+ name: get-interface
+ doc: Get information about an interface or dump a list of all interfaces
+ attribute-set: nl80211-attrs
+ do:
+ request:
+ value: 5
+ attributes:
+ - ifname
+ reply:
+ value: 7
+ attributes: &interface-reply-attrs
+ - ifname
+ - iftype
+ - ifindex
+ - wiphy
+ - wdev
+ - mac
+ - generation
+ - txq-stats
+ - 4addr
+ dump:
+ request:
+ attributes:
+ - ifname
+ reply:
+ attributes: *interface-reply-attrs
+ -
+ name: get-protocol-features
+ doc: Get information about supported protocol features
+ attribute-set: nl80211-attrs
+ do:
+ request:
+ value: 95
+ attributes:
+ - protocol-features
+ reply:
+ value: 95
+ attributes:
+ - protocol-features
+
+mcast-groups:
+ list:
+ -
+ name: config
+ -
+ name: scan
+ -
+ name: regulatory
+ -
+ name: mlme
+ -
+ name: vendor
+ -
+ name: nan
+ -
+ name: testmode
diff --git a/tools/net/ynl/Makefile.deps b/tools/net/ynl/Makefile.deps
index 0712b5e82eb7..d98d29bbd26c 100644
--- a/tools/net/ynl/Makefile.deps
+++ b/tools/net/ynl/Makefile.deps
@@ -21,6 +21,7 @@ CFLAGS_ethtool:=$(call get_hdr_inc,_LINUX_ETHTOOL_H,ethtool.h) \
CFLAGS_handshake:=$(call get_hdr_inc,_LINUX_HANDSHAKE_H,handshake.h)
CFLAGS_mptcp_pm:=$(call get_hdr_inc,_LINUX_MPTCP_PM_H,mptcp_pm.h)
CFLAGS_netdev:=$(call get_hdr_inc,_LINUX_NETDEV_H,netdev.h)
+CFLAGS_nl80211:=$(call get_hdr_inc,__LINUX_NL802121_H,nl80211.h)
CFLAGS_nlctrl:=$(call get_hdr_inc,__LINUX_GENERIC_NETLINK_H,genetlink.h)
CFLAGS_nfsd:=$(call get_hdr_inc,_LINUX_NFSD_NETLINK_H,nfsd_netlink.h)
CFLAGS_ovs_datapath:=$(call get_hdr_inc,__LINUX_OPENVSWITCH_H,openvswitch.h)
--
2.48.1
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH net-next v3 10/10] netlink: specs: wireless: add a spec for nl80211
2025-02-06 9:26 ` [PATCH net-next v3 10/10] netlink: specs: wireless: add a spec for nl80211 Donald Hunter
@ 2025-02-06 9:43 ` Johannes Berg
2025-02-06 12:12 ` Donald Hunter
0 siblings, 1 reply; 18+ messages in thread
From: Johannes Berg @ 2025-02-06 9:43 UTC (permalink / raw)
To: Donald Hunter, netdev, Jakub Kicinski, David S. Miller,
Eric Dumazet, Paolo Abeni, Simon Horman, linux-wireless
Cc: donald.hunter
On Thu, 2025-02-06 at 09:26 +0000, Donald Hunter wrote:
>
> + name: feature-flags
> + type: flags
> + entries:
> + - sk-tx-status
> + - ht-ibss
Oi, I'd really hoped you auto-generated that even with a one-off sed
script or so, but:
> + - ds-param-set-ie-in-probes
> + - wfa-tpc-ie-in-proves
typo?
johannes
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH net-next v3 10/10] netlink: specs: wireless: add a spec for nl80211
2025-02-06 9:43 ` Johannes Berg
@ 2025-02-06 12:12 ` Donald Hunter
0 siblings, 0 replies; 18+ messages in thread
From: Donald Hunter @ 2025-02-06 12:12 UTC (permalink / raw)
To: Johannes Berg
Cc: netdev, Jakub Kicinski, David S. Miller, Eric Dumazet,
Paolo Abeni, Simon Horman, linux-wireless, donald.hunter
Johannes Berg <johannes@sipsolutions.net> writes:
> On Thu, 2025-02-06 at 09:26 +0000, Donald Hunter wrote:
>>
>> + name: feature-flags
>> + type: flags
>> + entries:
>> + - sk-tx-status
>> + - ht-ibss
>
> Oi, I'd really hoped you auto-generated that even with a one-off sed
> script or so, but:
Yes, mostly done with editor macros.
>
>> + - ds-param-set-ie-in-probes
>> + - wfa-tpc-ie-in-proves
>
> typo?
Good catch.
>
> johannes
^ permalink raw reply [flat|nested] 18+ messages in thread