[PATCH] WAN: remove deprecated PCI_DEVICE_ID from PCI200SYN driver.

[Krzysztof Halasa <khc@pm.waw.pl>]

PCI200SYN has its own PCI subsystem device ID for 3+ years, now it's
time to remove the generic PLX905[02] ID from the driver. Anyone with
old EEPROM data will have to run the upgrade.

Having the generic PLX905[02] (PCI-local bus bridge) ID is harmful
as the driver tries to handle other devices based on these bridges.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>

--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -360,15 +360,6 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
 	       " %u RX packets rings\n", ramsize / 1024, ramphys,
 	       pdev->irq, card->tx_ring_buffers, card->rx_ring_buffers);
 
-	if (pdev->subsystem_device == PCI_DEVICE_ID_PLX_9050) {
-		printk(KERN_ERR "Detected PCI200SYN card with old "
-		       "configuration data.\n");
-		printk(KERN_ERR "See <http://www.kernel.org/pub/"
-		       "linux/utils/net/hdlc/pci200syn/> for update.\n");
-		printk(KERN_ERR "The card will stop working with"
-		       " future versions of Linux if not updated.\n");
-	}
-
 	if (card->tx_ring_buffers < 1) {
 		printk(KERN_ERR "pci200syn: RAM test failed\n");
 		pci200_pci_remove_one(pdev);
@@ -427,8 +418,6 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
 
 static struct pci_device_id pci200_pci_tbl[] __devinitdata = {
 	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
-	  PCI_DEVICE_ID_PLX_9050, 0, 0, 0 },
-	{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, PCI_VENDOR_ID_PLX,
 	  PCI_DEVICE_ID_PLX_PCI200SYN, 0, 0, 0 },
 	{ 0, }
 };
-- 
Krzysztof Halasa