* Re: [PATCH net-drivers-2.6 2/9] ixgb: Fix unnecessary link state messages
From: Francois Romieu @ 2005-06-18 10:28 UTC (permalink / raw)
To: Malli Chilakala; +Cc: jgarzik@pobox.com, netdev
In-Reply-To: <Pine.LNX.4.61.0506131234090.24260@anoushka.jf.intel.com>
Malli Chilakala <mallikarjuna.chilakala@intel.com> :
> Fix unnecessary link state messages
>
> Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com>
> Signed-off-by: John Ronciak <john.ronciak@intel.com>
The patch duplicates a lot of code. Do you really want these parts to be
modified independantly ?
--
Ueimor
^ permalink raw reply
* [PATCH] forcedeth: Poll for link changes
From: Manfred Spraul @ 2005-06-18 14:27 UTC (permalink / raw)
To: Jeff Garzik; +Cc: Netdev
[-- Attachment #1: Type: text/plain, Size: 426 bytes --]
Hi Jeff,
Several users reported that the link speed detection is unreliable with
nForce 3 nics. The result is either a completely dead network
connection, or the connection dies after a few minutes.
The attached patch enables a timer that polls the PHY for link speed
changes. The code already exists for nForce 1/2, the patch enables it
for all nForce versions.
Signed-Off-By: Manfred Spraul <manfred@colorfullife.com>
[-- Attachment #2: patch-forcedeth-linktimer --]
[-- Type: text/plain, Size: 4212 bytes --]
--- 2.6/drivers/net/forcedeth.c 2005-06-18 16:21:47.000000000 +0200
+++ build-2.6/drivers/net/forcedeth.c 2005-06-18 15:03:55.000000000 +0200
@@ -82,7 +82,8 @@
* 0.31: 14 Nov 2004: ethtool support for getting/setting link
* capabilities.
* 0.32: 16 Apr 2005: RX_ERROR4 handling added.
- * 0.33: 16 Mai 2005: Support for MCP51 added.
+ * 0.33: 16 May 2005: Support for MCP51 added.
+ * 0.34: 18 Jun 2005: Add DEV_NEED_LINKTIMER to all nForce nics.
*
* Known bugs:
* We suspect that on some hardware no TX done interrupts are generated.
@@ -94,7 +95,7 @@
* DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
* superfluous timer interrupts from the nic.
*/
-#define FORCEDETH_VERSION "0.33"
+#define FORCEDETH_VERSION "0.34"
#define DRV_NAME "forcedeth"
#include <linux/module.h>
@@ -2218,70 +2219,70 @@
.device = PCI_DEVICE_ID_NVIDIA_NVENET_4,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ,
+ .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* nForce3 Ethernet Controller */
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NVENET_5,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ,
+ .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* nForce3 Ethernet Controller */
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NVENET_6,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ,
+ .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* nForce3 Ethernet Controller */
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NVENET_7,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ,
+ .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* CK804 Ethernet Controller */
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NVENET_8,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ,
+ .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* CK804 Ethernet Controller */
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NVENET_9,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ,
+ .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* MCP04 Ethernet Controller */
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NVENET_10,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ,
+ .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* MCP04 Ethernet Controller */
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NVENET_11,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ,
+ .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* MCP51 Ethernet Controller */
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NVENET_12,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ,
+ .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{ /* MCP51 Ethernet Controller */
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NVENET_13,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ,
+ .driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
},
{0,},
};
^ permalink raw reply
* Re: [git patches] 2.6.x net driver updates
From: Linus Torvalds @ 2005-06-18 17:51 UTC (permalink / raw)
To: Jeff Garzik; +Cc: Andrew Morton, Netdev List, Linux Kernel
In-Reply-To: <42B456E2.8000500@pobox.com>
On Sat, 18 Jun 2005, Jeff Garzik wrote:
>
> GIT NOTE 1: The top-of-tree cset is the result of my use of the new git
> conflict merging code. It seemed to work quite nicely. I did:
>
> git-pull-script $vanilla_linus_repo # conflicts appeared
> vi drivers/net/r8169.c # fix conflict
> git-update-cache drivers/net/r8169.c
> git-commit-tree ...
The last step can be just "git commit", and it will do the right thing
these days (and with a nice big warnign that it looks like you're
committing a merge).
In fact, it's much preferable that you use "git commit", because it will
also then remove the old MERGE_HEAD if the commit was successful, leaving
the state proper (so that subsequent "git commit" things don't think it's
a merge). It also makes it less likely that you forget your parents.
Maybe.
> GIT NOTE 2: After doing a lot of simple+automatic merging, over time, I
> have a lot of .merge_* files. Would be nice is git-resolve-script, or
> whomever, would clean up after itself.
Yeah, something as simple as
rm -f .merge_file_*
in git-resolve-script should fix it..
Linus
^ permalink raw reply
* Re: [git patches] 2.6.x net driver updates
From: Linus Torvalds @ 2005-06-18 18:06 UTC (permalink / raw)
To: Jeff Garzik; +Cc: Andrew Morton, Netdev List, Linux Kernel
In-Reply-To: <Pine.LNX.4.58.0506181047190.2268@ppc970.osdl.org>
On Sat, 18 Jun 2005, Linus Torvalds wrote:
> On Sat, 18 Jun 2005, Jeff Garzik wrote:
> >
> > GIT NOTE 1: The top-of-tree cset is the result of my use of the new git
> > conflict merging code. It seemed to work quite nicely. I did:
> >
> > git-pull-script $vanilla_linus_repo # conflicts appeared
> > vi drivers/net/r8169.c # fix conflict
> > git-update-cache drivers/net/r8169.c
> > git-commit-tree ...
>
> The last step can be just "git commit", and it will do the right thing
> these days (and with a nice big warnign that it looks like you're
> committing a merge).
In fact, your last commit was broken, exactly because you had _not_ done
this part right.
Your parent information was crap, meaning that when I pulled, I had to
re-merge. In fact, I'm going to undo this pull entirely, because of this -
it's simply _wrong_. You claim to have done a merge and indeed your "data"
is merged, but your history is totally buggered because you didn't do the
proper parents.
Linus
^ permalink raw reply
* Re: [git patches] 2.6.x net driver updates
From: Linus Torvalds @ 2005-06-18 18:24 UTC (permalink / raw)
To: Jeff Garzik; +Cc: Andrew Morton, Netdev List, Linux Kernel
In-Reply-To: <Pine.LNX.4.58.0506181105110.2268@ppc970.osdl.org>
On Sat, 18 Jun 2005, Linus Torvalds wrote:
>
> Your parent information was crap, meaning that when I pulled, I had to
> re-merge. In fact, I'm going to undo this pull entirely, because of this -
> it's simply _wrong_. You claim to have done a merge and indeed your "data"
> is merged, but your history is totally buggered because you didn't do the
> proper parents.
Btw, this is serious. If you don't do proper parenting, you may have the
right _data_ in the tree, but because you lost sight of where that data
came from, all the commits leading up to that data (from the branch that
wasn't properly marked as a parent) are worthless and no longer reachable.
In other words, it means that all the history leading up to the merge was
just lost, and you end up with just a magic "all these changes suddenly
appeared" patch that claims to be a merge, but is really just a big patch.
It also means that "git prune" will just delete the unreachable commits,
since they are clearly not connected to anything any more. Also, any
intermediate file contents (that were only reachable through those
commits) are also unreachable and thus pruned. You literally end up with a
situation where the "merge" is 100% equivalent to just taking the final
patch, and applying it on top of the other head.
This may be the reason why you've had problems with "git prune". Your
tree histories may be buggered, and you've lost the merges with me.
Quite frankly, I'd never have noticed, except:
- because the history was buggered, the automated merge didn't find the
proper nearest parent, and thus it ended up finding a parent much
further back in history, which in turn meant that a trivial merge
wasn't trivial any more, and I got a merge conflict on the
drivers/net/r8169.c file.
- actually looking at the history (with gitk, or by looking at how many
parents the commits have with "git log --pretty=raw") made it obvious
that your "merge" had only one parent.
This, btw, is one reason why I suggest against multiple branches, and run
git-fsck-cache --unreachable religiously. A bad merge with lost parents
normally causes unreachable commits, and that's a sure sign of trouble.
However, in your usage schenario, those commits are reachable in the
branch they originated in, and you mix it all up, so you'll never see the
warning signs.
I'm hoping my earlier pulls on your trees haven't resulted in these kinds
of history losses before, and that this was the first time you did a merge
and didn't specify the parents properly. Pls confirm..
Linus
^ permalink raw reply
* Re: [git patches] 2.6.x net driver updates
From: Jeff Garzik @ 2005-06-18 18:36 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Andrew Morton, Netdev List, Linux Kernel
In-Reply-To: <Pine.LNX.4.58.0506181112590.2268@ppc970.osdl.org>
Linus Torvalds wrote:
> I'm hoping my earlier pulls on your trees haven't resulted in these kinds
> of history losses before, and that this was the first time you did a merge
> and didn't specify the parents properly. Pls confirm..
You're being overly paranoid :)
This netdev-2.6.git episode was the first time I ever tried to use the
conflict merging. I didn't know git had improved to the point where
"git commit" without any arguments would actually get things right.
All the other merges used the vanilla git-pull-script with no
modifications. Presumably it does the right thing :)
Jeff
^ permalink raw reply
* Re: [git patches] 2.6.x net driver updates
From: Linus Torvalds @ 2005-06-18 18:48 UTC (permalink / raw)
To: Jeff Garzik; +Cc: Andrew Morton, Netdev List, Linux Kernel
In-Reply-To: <42B469B6.2060502@pobox.com>
On Sat, 18 Jun 2005, Jeff Garzik wrote:
>
> Linus Torvalds wrote:
> > I'm hoping my earlier pulls on your trees haven't resulted in these kinds
> > of history losses before, and that this was the first time you did a merge
> > and didn't specify the parents properly. Pls confirm..
>
> You're being overly paranoid :)
>
> This netdev-2.6.git episode was the first time I ever tried to use the
> conflict merging. I didn't know git had improved to the point where
> "git commit" without any arguments would actually get things right.
>
> All the other merges used the vanilla git-pull-script with no
> modifications. Presumably it does the right thing :)
Yes.
Ok, I ended up re-doing the merge by hand (ie I fetched all the other
parts, ignored your top entry, and just merged the previous one manually).
I'm pushing out the result now, can you verify that the r8192.c file looks
like you expected it to look? I think it should be the same thing you
ended up with except for fixed parents, but...
Linus
^ permalink raw reply
* Re: receive only one record from the routing table
From: Tomáš Macek @ 2005-06-18 18:55 UTC (permalink / raw)
To: netdev
In-Reply-To: <20050617191340.GO22463@postel.suug.ch>
Thanks for your answers.
I just tried to compile the libnl, but some errors occured, so I'm just continuing without it.
But I've looked at the html documentation and it seems to be very good.
I repaired the main() function by adding the
rtMsg->rtm_family = AF_INET;
rtMsg->rtm_dst_len = 16;
but every request on any dst address in the routing table gives me this output:
Destination Gateway Interface Source Netmask
127.0.0.1 *.*.*.* lo 255.255.255.255
The 'rtm_dst_len = 16' should mean the mask of the route I'm looking for, correct? The whole code before sending the packet is below:
/* Create Socket */
if((sock = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_ROUTE)) < 0)
perror("Socket Creation: ");
/* Initialize the buffer */
memset(msgBuf, 0, BUFSIZE);
/* point the header and the msg structure pointers into the buffer */
nlMsg = (struct nlmsghdr *)msgBuf;
rtMsg = (struct rtmsg *)NLMSG_DATA(nlMsg);
rtMsg->rtm_family = AF_INET;
rtMsg->rtm_dst_len = 16;
/* Fill in the nlmsg header*/
nlMsg->nlmsg_len = NLMSG_LENGTH(sizeof(struct rtmsg)); // Length of message.
nlMsg->nlmsg_type = RTM_GETROUTE; // Get the routes from kernel routing table .
nlMsg->nlmsg_flags = NLM_F_REQUEST; // The message is a request for dump.
nlMsg->nlmsg_seq = msgSeq++; // Sequence of the message packet.
nlMsg->nlmsg_pid = getpid(); // PID of process sending the request.
char *cp;
unsigned int xx[4]; int i = 0;
unsigned char *ap = (unsigned char *)xx;
for (cp = argv[1], i = 0; *cp; cp++) {
if (*cp <= '9' && *cp >= '0') {
ap[i] = 10*ap[i] + (*cp-'0');
continue;
}
if (*cp == '.' && ++i <= 3)
continue;
return -1;
}
NetlinkAddAttr(nlMsg, sizeof(nlMsg), RTA_DST, &xx, 4);
On Fri, 17 Jun 2005, Thomas Graf wrote:
> * Tom?? Macek <Pine.LNX.4.61.0506172057240.26739@localhost.localdomain> 2005-06-17 20:57
>> Part of my routing table is here:
>>
>> 3.3.0.0 * 255.255.0.0 U 0 0 0 eth1
>> default meric 0.0.0.0 UG 0 0 0 eth0
>>
>> Ommiting NLM_F_DUMP and typing './a.out 3.3.0.0' gives
>>
>> Error in recieved packet: Success
>> Read From Socket Failed...
>
> Bcause you don't set rtm_dst_len to the prefix length or 32,
> and rtm_family (AF_INET). You could also use libnl, probably
> easier to use.
>
>
>
>
>
^ permalink raw reply
* Re: [git patches] 2.6.x net driver updates
From: Jeff Garzik @ 2005-06-18 20:04 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Andrew Morton, Netdev List, Linux Kernel
In-Reply-To: <Pine.LNX.4.58.0506181146260.2268@ppc970.osdl.org>
Linus Torvalds wrote:
> Ok, I ended up re-doing the merge by hand (ie I fetched all the other
> parts, ignored your top entry, and just merged the previous one manually).
>
> I'm pushing out the result now, can you verify that the r8192.c file looks
> like you expected it to look? I think it should be the same thing you
> ended up with except for fixed parents, but...
Looks good here, thanks.
I re-did the merge locally, as a test, finalizing with 'git commit'
rather than 'git-commit-tree ...' and the parent info came out correct.
FWIW.
Jeff
^ permalink raw reply
* Re: [git patches] 2.6.x net driver updates
From: Linus Torvalds @ 2005-06-18 20:23 UTC (permalink / raw)
To: Jeff Garzik; +Cc: Andrew Morton, Netdev List, Linux Kernel
In-Reply-To: <42B47E68.9020601@pobox.com>
On Sat, 18 Jun 2005, Jeff Garzik wrote:
>
> I re-did the merge locally, as a test, finalizing with 'git commit'
> rather than 'git-commit-tree ...' and the parent info came out correct.
> FWIW.
Well, you can certainly do it by hand with git-commit-tree too, you just
need to make sure that you give all the relevant parents, ie something
like
git-commit-tree $(git-write-tree) -p HEAD -p MERGE_HEAD
will do the right thing too (and is what "git commit" ends up doing in the
end, of course).
In fact, the "git commit" script will _only_ handle the merge case of
having done a single "git pull", and if you do anything more complex that
has more than two parents, you'll have to go back to scripting the use of
git-commit-tree by hand.
I've considered trying to automate this a bit more: right now it really
does depend on people and scripts always getting the parents right, but at
least in theory I could embed the parent information in the "index" file
at least as an additional safety-measure.
However, I'm not entirely sure that is a good idea: the current approach
is _extremely_ flexible, exactly because it allows you to do anything you
want with parents. That flexibility can be nice, but it's obviously also
what makes it a bit dangerous.
So the git approach is "give them rope", with a few scripts that handle
the normal cases right. That's the unix way, after all..
Linus
^ permalink raw reply
* Re: receive only one record from the routing table
From: Thomas Graf @ 2005-06-18 20:23 UTC (permalink / raw)
To: Tomá? Macek; +Cc: netdev
In-Reply-To: <Pine.LNX.4.61.0506182042540.29813@localhost.localdomain>
* Tom?? Macek <Pine.LNX.4.61.0506182042540.29813@localhost.localdomain> 2005-06-18 20:55
> The 'rtm_dst_len = 16' should mean the mask of the route I'm looking for, correct?
Yes.
> The whole code before sending the packet is below:
>
>
> /* Create Socket */
> if((sock = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_ROUTE)) < 0)
> perror("Socket Creation: ");
>
> /* Initialize the buffer */
> memset(msgBuf, 0, BUFSIZE);
>
> /* point the header and the msg structure pointers into the buffer */
> nlMsg = (struct nlmsghdr *)msgBuf;
> rtMsg = (struct rtmsg *)NLMSG_DATA(nlMsg);
> rtMsg->rtm_family = AF_INET;
> rtMsg->rtm_dst_len = 16;
>
> /* Fill in the nlmsg header*/
> nlMsg->nlmsg_len = NLMSG_LENGTH(sizeof(struct rtmsg)); // Length of message.
> nlMsg->nlmsg_type = RTM_GETROUTE; // Get the routes from kernel routing table .
> nlMsg->nlmsg_flags = NLM_F_REQUEST; // The message is a request for dump.
> nlMsg->nlmsg_seq = msgSeq++; // Sequence of the message packet.
> nlMsg->nlmsg_pid = getpid(); // PID of process sending the request.
>
> char *cp;
> unsigned int xx[4]; int i = 0;
> unsigned char *ap = (unsigned char *)xx;
> for (cp = argv[1], i = 0; *cp; cp++) {
> if (*cp <= '9' && *cp >= '0') {
> ap[i] = 10*ap[i] + (*cp-'0');
> continue;
> }
> if (*cp == '.' && ++i <= 3)
> continue;
> return -1;
> }
>
> NetlinkAddAttr(nlMsg, sizeof(nlMsg), RTA_DST, &xx, 4);
This looks good but your NetlinkAddAttr is bogus, it should
be something like this:
int nl_msg_append_tlv(struct nlmsghdr *n, int type, void *data, size_t len)
{
int tlen;
struct rtattr *rta;
tlen = NLMSG_ALIGN(n->nlmsg_len) + RTA_LENGTH(NLMSG_ALIGN(len));
rta = (struct rtattr *) NLMSG_TAIL(n);
rta->rta_type = type;
rta->rta_len = RTA_LENGTH(NLMSG_ALIGN(len));
memcpy(RTA_DATA(rta), data, len);
n->nlmsg_len = tlen;
return 0;
}
Your code is missing various alignment requirements. I can't tell
whether this is the last bug. I recommend you to read ip/iproute.c
in the iproute2 source or give libnl a second chance.
^ permalink raw reply
* [PATCH 0/9] orinoco updates
From: Christoph Hellwig @ 2005-06-18 23:27 UTC (permalink / raw)
To: jgarzik, proski, hermes; +Cc: netdev
This is a tweleve patch series to bring orinoco in mainline uptodate with CVS.
I've also use the new ieee80211.h constants from the Jeff's wireless
tree, so the first patch brings over a copy of that one.
I'm mentioning the original authors wherever I could find them out, but most
patches actually consists of various CVS commits that belong together
logically.
^ permalink raw reply
* [PATCH 1/9] bring over ieee80211.h from mainline
From: Christoph Hellwig @ 2005-06-18 23:27 UTC (permalink / raw)
To: jgarzik, proski, hermes; +Cc: netdev
the prototypes and inlines aren't actually needed, but let's not diverge
from -mm too far.
Index: linux-2.6/include/net/ieee80211.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6/include/net/ieee80211.h 2005-06-19 01:01:14.000000000 +0200
@@ -0,0 +1,882 @@
+/*
+ * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
+ * remains copyright by the original authors
+ *
+ * Portions of the merged code are based on Host AP (software wireless
+ * LAN access point) driver for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+#ifndef IEEE80211_H
+#define IEEE80211_H
+
+#include <linux/if_ether.h> /* ETH_ALEN */
+#include <linux/kernel.h> /* ARRAY_SIZE */
+
+#if WIRELESS_EXT < 17
+#define IW_QUAL_QUAL_INVALID 0x10
+#define IW_QUAL_LEVEL_INVALID 0x20
+#define IW_QUAL_NOISE_INVALID 0x40
+#define IW_QUAL_QUAL_UPDATED 0x1
+#define IW_QUAL_LEVEL_UPDATED 0x2
+#define IW_QUAL_NOISE_UPDATED 0x4
+#endif
+
+#define IEEE80211_DATA_LEN 2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+ 6.2.1.1.2.
+
+ The figure in section 7.1.2 suggests a body size of up to 2312
+ bytes is allowed, which is a bit confusing, I suspect this
+ represents the 2304 bytes of real data, plus a possible 8 bytes of
+ WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+
+#define IEEE80211_HLEN 30
+#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+struct ieee80211_hdr {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addr {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+} __attribute__ ((packed));
+
+enum eap_type {
+ EAP_PACKET = 0,
+ EAPOL_START,
+ EAPOL_LOGOFF,
+ EAPOL_KEY,
+ EAPOL_ENCAP_ASF_ALERT
+};
+
+static const char *eap_types[] = {
+ [EAP_PACKET] = "EAP-Packet",
+ [EAPOL_START] = "EAPOL-Start",
+ [EAPOL_LOGOFF] = "EAPOL-Logoff",
+ [EAPOL_KEY] = "EAPOL-Key",
+ [EAPOL_ENCAP_ASF_ALERT] = "EAPOL-Encap-ASF-Alert"
+};
+
+static inline const char *eap_get_type(int type)
+{
+ return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
+}
+
+struct eapol {
+ u8 snap[6];
+ u16 ethertype;
+ u8 version;
+ u8 type;
+ u16 length;
+} __attribute__ ((packed));
+
+#define IEEE80211_3ADDR_LEN 24
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_FCS_LEN 4
+
+#define MIN_FRAG_THRESHOLD 256U
+#define MAX_FRAG_THRESHOLD 2346U
+
+/* Frame control field constants */
+#define IEEE80211_FCTL_VERS 0x0002
+#define IEEE80211_FCTL_FTYPE 0x000c
+#define IEEE80211_FCTL_STYPE 0x00f0
+#define IEEE80211_FCTL_TODS 0x0100
+#define IEEE80211_FCTL_FROMDS 0x0200
+#define IEEE80211_FCTL_MOREFRAGS 0x0400
+#define IEEE80211_FCTL_RETRY 0x0800
+#define IEEE80211_FCTL_PM 0x1000
+#define IEEE80211_FCTL_MOREDATA 0x2000
+#define IEEE80211_FCTL_WEP 0x4000
+#define IEEE80211_FCTL_ORDER 0x8000
+
+#define IEEE80211_FTYPE_MGMT 0x0000
+#define IEEE80211_FTYPE_CTL 0x0004
+#define IEEE80211_FTYPE_DATA 0x0008
+
+/* management */
+#define IEEE80211_STYPE_ASSOC_REQ 0x0000
+#define IEEE80211_STYPE_ASSOC_RESP 0x0010
+#define IEEE80211_STYPE_REASSOC_REQ 0x0020
+#define IEEE80211_STYPE_REASSOC_RESP 0x0030
+#define IEEE80211_STYPE_PROBE_REQ 0x0040
+#define IEEE80211_STYPE_PROBE_RESP 0x0050
+#define IEEE80211_STYPE_BEACON 0x0080
+#define IEEE80211_STYPE_ATIM 0x0090
+#define IEEE80211_STYPE_DISASSOC 0x00A0
+#define IEEE80211_STYPE_AUTH 0x00B0
+#define IEEE80211_STYPE_DEAUTH 0x00C0
+
+/* control */
+#define IEEE80211_STYPE_PSPOLL 0x00A0
+#define IEEE80211_STYPE_RTS 0x00B0
+#define IEEE80211_STYPE_CTS 0x00C0
+#define IEEE80211_STYPE_ACK 0x00D0
+#define IEEE80211_STYPE_CFEND 0x00E0
+#define IEEE80211_STYPE_CFENDACK 0x00F0
+
+/* data */
+#define IEEE80211_STYPE_DATA 0x0000
+#define IEEE80211_STYPE_DATA_CFACK 0x0010
+#define IEEE80211_STYPE_DATA_CFPOLL 0x0020
+#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
+#define IEEE80211_STYPE_NULLFUNC 0x0040
+#define IEEE80211_STYPE_CFACK 0x0050
+#define IEEE80211_STYPE_CFPOLL 0x0060
+#define IEEE80211_STYPE_CFACKPOLL 0x0070
+
+#define IEEE80211_SCTL_FRAG 0x000F
+#define IEEE80211_SCTL_SEQ 0xFFF0
+
+
+/* debug macros */
+
+#ifdef CONFIG_IEEE80211_DEBUG
+extern u32 ieee80211_debug_level;
+#define IEEE80211_DEBUG(level, fmt, args...) \
+do { if (ieee80211_debug_level & (level)) \
+ printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
+ in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+#else
+#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
+#endif /* CONFIG_IEEE80211_DEBUG */
+
+/*
+ * To use the debug system;
+ *
+ * If you are defining a new debug classification, simply add it to the #define
+ * list here in the form of:
+ *
+ * #define IEEE80211_DL_xxxx VALUE
+ *
+ * shifting value to the left one bit from the previous entry. xxxx should be
+ * the name of the classification (for example, WEP)
+ *
+ * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
+ * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
+ * to send output to that classification.
+ *
+ * To add your debug level to the list of levels seen when you perform
+ *
+ * % cat /proc/net/ipw/debug_level
+ *
+ * you simply need to add your entry to the ipw_debug_levels array.
+ *
+ * If you do not see debug_level in /proc/net/ipw then you do not have
+ * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
+ *
+ */
+
+#define IEEE80211_DL_INFO (1<<0)
+#define IEEE80211_DL_WX (1<<1)
+#define IEEE80211_DL_SCAN (1<<2)
+#define IEEE80211_DL_STATE (1<<3)
+#define IEEE80211_DL_MGMT (1<<4)
+#define IEEE80211_DL_FRAG (1<<5)
+#define IEEE80211_DL_EAP (1<<6)
+#define IEEE80211_DL_DROP (1<<7)
+
+#define IEEE80211_DL_TX (1<<8)
+#define IEEE80211_DL_RX (1<<9)
+
+#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
+#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
+#define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
+
+#define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
+#define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
+#define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
+#define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
+#define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
+#define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
+#define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
+#define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
+#define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/if_arp.h> /* ARPHRD_ETHER */
+
+#ifndef WIRELESS_SPY
+#define WIRELESS_SPY // enable iwspy support
+#endif
+#include <net/iw_handler.h> // new driver API
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
+
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+
+#ifndef ETH_P_80211_RAW
+#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
+#endif
+
+/* IEEE 802.11 defines */
+
+#define P80211_OUI_LEN 3
+
+struct ieee80211_snap_hdr {
+
+ u8 dsap; /* always 0xAA */
+ u8 ssap; /* always 0xAA */
+ u8 ctrl; /* always 0x03 */
+ u8 oui[P80211_OUI_LEN]; /* organizational universal id */
+
+} __attribute__ ((packed));
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
+
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
+#define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ)
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_BSS (1<<0)
+#define WLAN_CAPABILITY_IBSS (1<<1)
+#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
+#define WLAN_CAPABILITY_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
+#define WLAN_CAPABILITY_PBCC (1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
+
+/* Status codes */
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18
+/* 802.11b */
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
+#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
+
+/* Reason codes */
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
+
+
+/* Information Element IDs */
+#define WLAN_EID_SSID 0
+#define WLAN_EID_SUPP_RATES 1
+#define WLAN_EID_FH_PARAMS 2
+#define WLAN_EID_DS_PARAMS 3
+#define WLAN_EID_CF_PARAMS 4
+#define WLAN_EID_TIM 5
+#define WLAN_EID_IBSS_PARAMS 6
+#define WLAN_EID_CHALLENGE 16
+#define WLAN_EID_RSN 48
+#define WLAN_EID_GENERIC 221
+
+#define IEEE80211_MGMT_HDR_LEN 24
+#define IEEE80211_DATA_HDR3_LEN 24
+#define IEEE80211_DATA_HDR4_LEN 30
+
+
+#define IEEE80211_STATMASK_SIGNAL (1<<0)
+#define IEEE80211_STATMASK_RSSI (1<<1)
+#define IEEE80211_STATMASK_NOISE (1<<2)
+#define IEEE80211_STATMASK_RATE (1<<3)
+#define IEEE80211_STATMASK_WEMASK 0x7
+
+
+#define IEEE80211_CCK_MODULATION (1<<0)
+#define IEEE80211_OFDM_MODULATION (1<<1)
+
+#define IEEE80211_24GHZ_BAND (1<<0)
+#define IEEE80211_52GHZ_BAND (1<<1)
+
+#define IEEE80211_CCK_RATE_1MB 0x02
+#define IEEE80211_CCK_RATE_2MB 0x04
+#define IEEE80211_CCK_RATE_5MB 0x0B
+#define IEEE80211_CCK_RATE_11MB 0x16
+#define IEEE80211_OFDM_RATE_6MB 0x0C
+#define IEEE80211_OFDM_RATE_9MB 0x12
+#define IEEE80211_OFDM_RATE_12MB 0x18
+#define IEEE80211_OFDM_RATE_18MB 0x24
+#define IEEE80211_OFDM_RATE_24MB 0x30
+#define IEEE80211_OFDM_RATE_36MB 0x48
+#define IEEE80211_OFDM_RATE_48MB 0x60
+#define IEEE80211_OFDM_RATE_54MB 0x6C
+#define IEEE80211_BASIC_RATE_MASK 0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
+
+#define IEEE80211_CCK_RATES_MASK 0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
+ IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
+ IEEE80211_CCK_RATE_5MB_MASK | \
+ IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK 0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
+ IEEE80211_OFDM_RATE_12MB_MASK | \
+ IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
+ IEEE80211_OFDM_RATE_9MB_MASK | \
+ IEEE80211_OFDM_RATE_18MB_MASK | \
+ IEEE80211_OFDM_RATE_36MB_MASK | \
+ IEEE80211_OFDM_RATE_48MB_MASK | \
+ IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+ IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+#define IEEE80211_NUM_OFDM_RATES 8
+#define IEEE80211_NUM_CCK_RATES 4
+#define IEEE80211_OFDM_SHIFT_MASK_A 4
+
+
+
+
+/* NOTE: This data is for statistical purposes; not all hardware provides this
+ * information for frames received. Not setting these will not cause
+ * any adverse affects. */
+struct ieee80211_rx_stats {
+ u32 mac_time;
+ s8 rssi;
+ u8 signal;
+ u8 noise;
+ u16 rate; /* in 100 kbps */
+ u8 received_channel;
+ u8 control;
+ u8 mask;
+ u8 freq;
+ u16 len;
+};
+
+/* IEEE 802.11 requires that STA supports concurrent reception of at least
+ * three fragmented frames. This define can be increased to support more
+ * concurrent frames, but it should be noted that each entry can consume about
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+#define IEEE80211_FRAG_CACHE_LEN 4
+
+struct ieee80211_frag_entry {
+ unsigned long first_frag_time;
+ unsigned int seq;
+ unsigned int last_frag;
+ struct sk_buff *skb;
+ u8 src_addr[ETH_ALEN];
+ u8 dst_addr[ETH_ALEN];
+};
+
+struct ieee80211_stats {
+ unsigned int tx_unicast_frames;
+ unsigned int tx_multicast_frames;
+ unsigned int tx_fragments;
+ unsigned int tx_unicast_octets;
+ unsigned int tx_multicast_octets;
+ unsigned int tx_deferred_transmissions;
+ unsigned int tx_single_retry_frames;
+ unsigned int tx_multiple_retry_frames;
+ unsigned int tx_retry_limit_exceeded;
+ unsigned int tx_discards;
+ unsigned int rx_unicast_frames;
+ unsigned int rx_multicast_frames;
+ unsigned int rx_fragments;
+ unsigned int rx_unicast_octets;
+ unsigned int rx_multicast_octets;
+ unsigned int rx_fcs_errors;
+ unsigned int rx_discards_no_buffer;
+ unsigned int tx_discards_wrong_sa;
+ unsigned int rx_discards_undecryptable;
+ unsigned int rx_message_in_msg_fragments;
+ unsigned int rx_message_in_bad_msg_fragments;
+};
+
+struct ieee80211_device;
+
+#define SEC_KEY_1 (1<<0)
+#define SEC_KEY_2 (1<<1)
+#define SEC_KEY_3 (1<<2)
+#define SEC_KEY_4 (1<<3)
+#define SEC_ACTIVE_KEY (1<<4)
+#define SEC_AUTH_MODE (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL (1<<7)
+#define SEC_ENABLED (1<<8)
+
+#define SEC_LEVEL_0 0 /* None */
+#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2 2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3 4 /* Level 2 + CCMP */
+
+#define WEP_KEYS 4
+#define WEP_KEY_LEN 13
+
+struct ieee80211_security {
+ u16 active_key:2,
+ enabled:1,
+ auth_mode:2,
+ auth_algo:4,
+ unicast_uses_group:1;
+ u8 key_sizes[WEP_KEYS];
+ u8 keys[WEP_KEYS][WEP_KEY_LEN];
+ u8 level;
+ u16 flags;
+} __attribute__ ((packed));
+
+
+/*
+
+ 802.11 data frame from AP
+
+ ,-------------------------------------------------------------------.
+Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
+ |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
+ | | tion | (BSSID) | | | ence | data | |
+ `-------------------------------------------------------------------'
+
+Total: 28-2340 bytes
+
+*/
+
+struct ieee80211_header_data {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[6];
+ u8 addr2[6];
+ u8 addr3[6];
+ u16 seq_ctrl;
+};
+
+#define BEACON_PROBE_SSID_ID_POSITION 12
+
+/* Management Frame Information Element Types */
+#define MFIE_TYPE_SSID 0
+#define MFIE_TYPE_RATES 1
+#define MFIE_TYPE_FH_SET 2
+#define MFIE_TYPE_DS_SET 3
+#define MFIE_TYPE_CF_SET 4
+#define MFIE_TYPE_TIM 5
+#define MFIE_TYPE_IBSS_SET 6
+#define MFIE_TYPE_CHALLENGE 16
+#define MFIE_TYPE_RSN 48
+#define MFIE_TYPE_RATES_EX 50
+#define MFIE_TYPE_GENERIC 221
+
+struct ieee80211_info_element_hdr {
+ u8 id;
+ u8 len;
+} __attribute__ ((packed));
+
+struct ieee80211_info_element {
+ u8 id;
+ u8 len;
+ u8 data[0];
+} __attribute__ ((packed));
+
+/*
+ * These are the data types that can make up management packets
+ *
+ u16 auth_algorithm;
+ u16 auth_sequence;
+ u16 beacon_interval;
+ u16 capability;
+ u8 current_ap[ETH_ALEN];
+ u16 listen_interval;
+ struct {
+ u16 association_id:14, reserved:2;
+ } __attribute__ ((packed));
+ u32 time_stamp[2];
+ u16 reason;
+ u16 status;
+*/
+
+struct ieee80211_authentication {
+ struct ieee80211_header_data header;
+ u16 algorithm;
+ u16 transaction;
+ u16 status;
+ struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+
+struct ieee80211_probe_response {
+ struct ieee80211_header_data header;
+ u32 time_stamp[2];
+ u16 beacon_interval;
+ u16 capability;
+ struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+struct ieee80211_assoc_request_frame {
+ u16 capability;
+ u16 listen_interval;
+ u8 current_ap[ETH_ALEN];
+ struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+struct ieee80211_assoc_response_frame {
+ struct ieee80211_hdr_3addr header;
+ u16 capability;
+ u16 status;
+ u16 aid;
+ struct ieee80211_info_element info_element; /* supported rates */
+} __attribute__ ((packed));
+
+
+struct ieee80211_txb {
+ u8 nr_frags;
+ u8 encrypted;
+ u16 reserved;
+ u16 frag_size;
+ u16 payload_size;
+ struct sk_buff *fragments[0];
+};
+
+
+/* SWEEP TABLE ENTRIES NUMBER*/
+#define MAX_SWEEP_TAB_ENTRIES 42
+#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
+/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
+ * only use 8, and then use extended rates for the remaining supported
+ * rates. Other APs, however, stick all of their supported rates on the
+ * main rates information element... */
+#define MAX_RATES_LENGTH ((u8)12)
+#define MAX_RATES_EX_LENGTH ((u8)16)
+#define MAX_NETWORK_COUNT 128
+
+#define CRC_LENGTH 4U
+
+#define MAX_WPA_IE_LEN 64
+
+#define NETWORK_EMPTY_ESSID (1<<0)
+#define NETWORK_HAS_OFDM (1<<1)
+#define NETWORK_HAS_CCK (1<<2)
+
+struct ieee80211_network {
+ /* These entries are used to identify a unique network */
+ u8 bssid[ETH_ALEN];
+ u8 channel;
+ /* Ensure null-terminated for any debug msgs */
+ u8 ssid[IW_ESSID_MAX_SIZE + 1];
+ u8 ssid_len;
+
+ /* These are network statistics */
+ struct ieee80211_rx_stats stats;
+ u16 capability;
+ u8 rates[MAX_RATES_LENGTH];
+ u8 rates_len;
+ u8 rates_ex[MAX_RATES_EX_LENGTH];
+ u8 rates_ex_len;
+ unsigned long last_scanned;
+ u8 mode;
+ u8 flags;
+ u32 last_associate;
+ u32 time_stamp[2];
+ u16 beacon_interval;
+ u16 listen_interval;
+ u16 atim_window;
+ u8 wpa_ie[MAX_WPA_IE_LEN];
+ size_t wpa_ie_len;
+ u8 rsn_ie[MAX_WPA_IE_LEN];
+ size_t rsn_ie_len;
+ struct list_head list;
+};
+
+enum ieee80211_state {
+ IEEE80211_UNINITIALIZED = 0,
+ IEEE80211_INITIALIZED,
+ IEEE80211_ASSOCIATING,
+ IEEE80211_ASSOCIATED,
+ IEEE80211_AUTHENTICATING,
+ IEEE80211_AUTHENTICATED,
+ IEEE80211_SHUTDOWN
+};
+
+#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
+#define DEFAULT_FTS 2346
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
+
+
+extern inline int is_broadcast_ether_addr(const u8 *addr)
+{
+ return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \
+ (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+}
+
+#define CFG_IEEE80211_RESERVE_FCS (1<<0)
+#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
+
+struct ieee80211_device {
+ struct net_device *dev;
+
+ /* Bookkeeping structures */
+ struct net_device_stats stats;
+ struct ieee80211_stats ieee_stats;
+
+ /* Probe / Beacon management */
+ struct list_head network_free_list;
+ struct list_head network_list;
+ struct ieee80211_network *networks;
+ int scans;
+ int scan_age;
+
+ int iw_mode; /* operating mode (IW_MODE_*) */
+
+ spinlock_t lock;
+
+ int tx_headroom; /* Set to size of any additional room needed at front
+ * of allocated Tx SKBs */
+ u32 config;
+
+ /* WEP and other encryption related settings at the device level */
+ int open_wep; /* Set to 1 to allow unencrypted frames */
+
+ int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
+ * WEP key changes */
+
+ /* If the host performs {en,de}cryption, then set to 1 */
+ int host_encrypt;
+ int host_decrypt;
+ int ieee802_1x; /* is IEEE 802.1X used */
+
+ /* WPA data */
+ int wpa_enabled;
+ int drop_unencrypted;
+ int tkip_countermeasures;
+ int privacy_invoked;
+ size_t wpa_ie_len;
+ u8 *wpa_ie;
+
+ struct list_head crypt_deinit_list;
+ struct ieee80211_crypt_data *crypt[WEP_KEYS];
+ int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
+ struct timer_list crypt_deinit_timer;
+
+ int bcrx_sta_key; /* use individual keys to override default keys even
+ * with RX of broad/multicast frames */
+
+ /* Fragmentation structures */
+ struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN];
+ unsigned int frag_next_idx;
+ u16 fts; /* Fragmentation Threshold */
+
+ /* Association info */
+ u8 bssid[ETH_ALEN];
+
+ enum ieee80211_state state;
+
+ int mode; /* A, B, G */
+ int modulation; /* CCK, OFDM */
+ int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */
+ int abg_ture; /* ABG flag */
+
+ /* Callback functions */
+ void (*set_security)(struct net_device *dev,
+ struct ieee80211_security *sec);
+ int (*hard_start_xmit)(struct ieee80211_txb *txb,
+ struct net_device *dev);
+ int (*reset_port)(struct net_device *dev);
+
+ /* This must be the last item so that it points to the data
+ * allocated beyond this structure by alloc_ieee80211 */
+ u8 priv[0];
+};
+
+#define IEEE_A (1<<0)
+#define IEEE_B (1<<1)
+#define IEEE_G (1<<2)
+#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
+
+extern inline void *ieee80211_priv(struct net_device *dev)
+{
+ return ((struct ieee80211_device *)netdev_priv(dev))->priv;
+}
+
+extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+{
+ /* Single white space is for Linksys APs */
+ if (essid_len == 1 && essid[0] == ' ')
+ return 1;
+
+ /* Otherwise, if the entire essid is 0, we assume it is hidden */
+ while (essid_len) {
+ essid_len--;
+ if (essid[essid_len] != '\0')
+ return 0;
+ }
+
+ return 1;
+}
+
+extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
+{
+ /*
+ * It is possible for both access points and our device to support
+ * combinations of modes, so as long as there is one valid combination
+ * of ap/device supported modes, then return success
+ *
+ */
+ if ((mode & IEEE_A) &&
+ (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+ (ieee->freq_band & IEEE80211_52GHZ_BAND))
+ return 1;
+
+ if ((mode & IEEE_G) &&
+ (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+ (ieee->freq_band & IEEE80211_24GHZ_BAND))
+ return 1;
+
+ if ((mode & IEEE_B) &&
+ (ieee->modulation & IEEE80211_CCK_MODULATION) &&
+ (ieee->freq_band & IEEE80211_24GHZ_BAND))
+ return 1;
+
+ return 0;
+}
+
+extern inline int ieee80211_get_hdrlen(u16 fc)
+{
+ int hdrlen = 24;
+
+ switch (WLAN_FC_GET_TYPE(fc)) {
+ case IEEE80211_FTYPE_DATA:
+ if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
+ hdrlen = 30; /* Addr4 */
+ break;
+ case IEEE80211_FTYPE_CTL:
+ switch (WLAN_FC_GET_STYPE(fc)) {
+ case IEEE80211_STYPE_CTS:
+ case IEEE80211_STYPE_ACK:
+ hdrlen = 10;
+ break;
+ default:
+ hdrlen = 16;
+ break;
+ }
+ break;
+ }
+
+ return hdrlen;
+}
+
+
+
+/* ieee80211.c */
+extern void free_ieee80211(struct net_device *dev);
+extern struct net_device *alloc_ieee80211(int sizeof_priv);
+
+extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
+
+/* ieee80211_tx.c */
+
+
+extern int ieee80211_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+extern void ieee80211_txb_free(struct ieee80211_txb *);
+
+
+/* ieee80211_rx.c */
+extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
+ struct ieee80211_rx_stats *rx_stats);
+extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
+ struct ieee80211_hdr *header,
+ struct ieee80211_rx_stats *stats);
+
+/* iee80211_wx.c */
+extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key);
+
+
+extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
+{
+ ieee->scans++;
+}
+
+extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
+{
+ return ieee->scans;
+}
+
+static inline const char *escape_essid(const char *essid, u8 essid_len) {
+ static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
+ const char *s = essid;
+ char *d = escaped;
+
+ if (ieee80211_is_empty_essid(essid, essid_len)) {
+ memcpy(escaped, "<hidden>", sizeof("<hidden>"));
+ return escaped;
+ }
+
+ essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
+ while (essid_len--) {
+ if (*s == '\0') {
+ *d++ = '\\';
+ *d++ = '0';
+ s++;
+ } else {
+ *d++ = *s++;
+ }
+ }
+ *d = '\0';
+ return escaped;
+}
+
+#endif /* IEEE80211_H */
^ permalink raw reply
* [PATCH 2/9] orinoco: include <net/ieee80211.h>
From: Christoph Hellwig @ 2005-06-18 23:27 UTC (permalink / raw)
To: jgarzik, proski, hermes; +Cc: netdev
We need constants from this header in the next patches.
Index: linux-2.6/drivers/net/wireless/orinoco.c
===================================================================
--- linux-2.6.orig/drivers/net/wireless/orinoco.c 2005-06-19 00:59:34.000000000 +0200
+++ linux-2.6/drivers/net/wireless/orinoco.c 2005-06-19 01:02:24.000000000 +0200
@@ -463,6 +463,7 @@
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/wireless.h>
+#include <net/ieee80211.h>
#include <asm/uaccess.h>
#include <asm/io.h>
^ permalink raw reply
* [PATCH 3/9] orinoco: wireless API 15 support
From: Christoph Hellwig @ 2005-06-18 23:27 UTC (permalink / raw)
To: jgarzik, proski, hermes; +Cc: netdev
(patch from Moustafa Youssef, updated by Jim Carter and Pavel Roskin).
Index: linux-2.6/drivers/net/wireless/orinoco.c
===================================================================
--- linux-2.6.orig/drivers/net/wireless/orinoco.c 2005-06-19 01:02:24.000000000 +0200
+++ linux-2.6/drivers/net/wireless/orinoco.c 2005-06-19 01:03:24.000000000 +0200
@@ -463,6 +463,7 @@
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/wireless.h>
+#include <net/iw_handler.h>
#include <net/ieee80211.h>
#include <asm/uaccess.h>
@@ -538,6 +539,10 @@
| HERMES_EV_WTERR | HERMES_EV_INFO \
| HERMES_EV_INFDROP )
+#define MAX_RID_LEN 1024
+
+static const struct iw_handler_def orinoco_handler_def;
+
/********************************************************************/
/* Data tables */
/********************************************************************/
@@ -605,7 +610,6 @@
/* Function prototypes */
/********************************************************************/
-static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int __orinoco_program_rids(struct net_device *dev);
static void __orinoco_set_multicast_list(struct net_device *dev);
@@ -1870,55 +1874,6 @@
dev->flags &= ~IFF_PROMISC;
}
-static int orinoco_reconfigure(struct net_device *dev)
-{
- struct orinoco_private *priv = netdev_priv(dev);
- struct hermes *hw = &priv->hw;
- unsigned long flags;
- int err = 0;
-
- if (priv->broken_disableport) {
- schedule_work(&priv->reset_work);
- return 0;
- }
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_disable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n",
- dev->name);
- priv->broken_disableport = 1;
- goto out;
- }
-
- err = __orinoco_program_rids(dev);
- if (err) {
- printk(KERN_WARNING "%s: Unable to reconfigure card\n",
- dev->name);
- goto out;
- }
-
- err = hermes_enable_port(hw, 0);
- if (err) {
- printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
- dev->name);
- goto out;
- }
-
- out:
- if (err) {
- printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
- schedule_work(&priv->reset_work);
- err = 0;
- }
-
- orinoco_unlock(priv, &flags);
- return err;
-
-}
-
/* This must be called from user context, without locks held - use
* schedule_work() */
static void orinoco_reset(struct net_device *dev)
@@ -2458,7 +2413,7 @@
dev->watchdog_timeo = HZ; /* 1 second timeout */
dev->get_stats = orinoco_get_stats;
dev->get_wireless_stats = orinoco_get_wireless_stats;
- dev->do_ioctl = orinoco_ioctl;
+ dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def;
dev->change_mtu = orinoco_change_mtu;
dev->set_multicast_list = orinoco_set_multicast_list;
/* we use the default eth_mac_addr for setting the MAC addr */
@@ -2491,24 +2446,6 @@
/* Wireless extensions */
/********************************************************************/
-static int orinoco_hw_get_bssid(struct orinoco_private *priv,
- char buf[ETH_ALEN])
-{
- hermes_t *hw = &priv->hw;
- int err = 0;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
-
- err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
- ETH_ALEN, NULL, buf);
-
- orinoco_unlock(priv, &flags);
-
- return err;
-}
-
static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
char buf[IW_ESSID_MAX_SIZE+1])
{
@@ -2634,140 +2571,201 @@
return 0;
}
-static int orinoco_ioctl_getiwrange(struct net_device *dev, struct iw_point *rrq)
+static int orinoco_ioctl_getname(struct net_device *dev,
+ struct iw_request_info *info,
+ char *name,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
- int mode;
- struct iw_range range;
int numrates;
- int i, k;
+ int err;
+
+ err = orinoco_hw_get_bitratelist(priv, &numrates, NULL, 0);
+
+ if (!err && (numrates > 2))
+ strcpy(name, "IEEE 802.11b");
+ else
+ strcpy(name, "IEEE 802.11-DS");
+
+ return 0;
+}
+
+static int orinoco_ioctl_getwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ hermes_t *hw = &priv->hw;
+ int err = 0;
unsigned long flags;
- TRACE_ENTER(dev->name);
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
- if (!access_ok(VERIFY_WRITE, rrq->pointer, sizeof(range)))
- return -EFAULT;
+ ap_addr->sa_family = ARPHRD_ETHER;
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, ap_addr->sa_data);
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_setmode(struct net_device *dev,
+ struct iw_request_info *info,
+ u32 *mode,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = -EINPROGRESS; /* Call commit handler */
+ unsigned long flags;
- rrq->length = sizeof(range);
+ if (priv->iw_mode == *mode)
+ return 0;
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- mode = priv->iw_mode;
+ switch (*mode) {
+ case IW_MODE_ADHOC:
+ if (!priv->has_ibss && !priv->has_port3)
+ err = -EOPNOTSUPP;
+ break;
+
+ case IW_MODE_INFRA:
+ break;
+
+ default:
+ err = -EOPNOTSUPP;
+ break;
+ }
+
+ if (err == -EINPROGRESS) {
+ priv->iw_mode = *mode;
+ set_port_type(priv);
+ }
+
orinoco_unlock(priv, &flags);
- memset(&range, 0, sizeof(range));
+ return err;
+}
+
+static int orinoco_ioctl_getmode(struct net_device *dev,
+ struct iw_request_info *info,
+ u32 *mode,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ *mode = priv->iw_mode;
+ return 0;
+}
+
+static int orinoco_ioctl_getiwrange(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *rrq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ struct iw_range *range = (struct iw_range *) extra;
+ int numrates;
+ int i, k;
+
+ TRACE_ENTER(dev->name);
- /* Much of this shamelessly taken from wvlan_cs.c. No idea
- * what it all means -dgibson */
- range.we_version_compiled = WIRELESS_EXT;
- range.we_version_source = 11;
+ rrq->length = sizeof(struct iw_range);
+ memset(range, 0, sizeof(struct iw_range));
- range.min_nwid = range.max_nwid = 0; /* We don't use nwids */
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 14;
/* Set available channels/frequencies */
- range.num_channels = NUM_CHANNELS;
+ range->num_channels = NUM_CHANNELS;
k = 0;
for (i = 0; i < NUM_CHANNELS; i++) {
if (priv->channel_mask & (1 << i)) {
- range.freq[k].i = i + 1;
- range.freq[k].m = channel_frequency[i] * 100000;
- range.freq[k].e = 1;
+ range->freq[k].i = i + 1;
+ range->freq[k].m = channel_frequency[i] * 100000;
+ range->freq[k].e = 1;
k++;
}
if (k >= IW_MAX_FREQUENCIES)
break;
}
- range.num_frequency = k;
+ range->num_frequency = k;
+ range->sensitivity = 3;
- range.sensitivity = 3;
+ if (priv->has_wep) {
+ range->max_encoding_tokens = ORINOCO_MAX_KEYS;
+ range->encoding_size[0] = SMALL_KEY_SIZE;
+ range->num_encoding_sizes = 1;
+
+ if (priv->has_big_wep) {
+ range->encoding_size[1] = LARGE_KEY_SIZE;
+ range->num_encoding_sizes = 2;
+ }
+ }
- if ((mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){
+ if ((priv->iw_mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){
/* Quality stats meaningless in ad-hoc mode */
- range.max_qual.qual = 0;
- range.max_qual.level = 0;
- range.max_qual.noise = 0;
- range.avg_qual.qual = 0;
- range.avg_qual.level = 0;
- range.avg_qual.noise = 0;
} else {
- range.max_qual.qual = 0x8b - 0x2f;
- range.max_qual.level = 0x2f - 0x95 - 1;
- range.max_qual.noise = 0x2f - 0x95 - 1;
+ range->max_qual.qual = 0x8b - 0x2f;
+ range->max_qual.level = 0x2f - 0x95 - 1;
+ range->max_qual.noise = 0x2f - 0x95 - 1;
/* Need to get better values */
- range.avg_qual.qual = 0x24;
- range.avg_qual.level = 0xC2;
- range.avg_qual.noise = 0x9E;
+ range->avg_qual.qual = 0x24;
+ range->avg_qual.level = 0xC2;
+ range->avg_qual.noise = 0x9E;
}
err = orinoco_hw_get_bitratelist(priv, &numrates,
- range.bitrate, IW_MAX_BITRATES);
+ range->bitrate, IW_MAX_BITRATES);
if (err)
return err;
- range.num_bitrates = numrates;
-
+ range->num_bitrates = numrates;
+
/* Set an indication of the max TCP throughput in bit/s that we can
* expect using this interface. May be use for QoS stuff...
* Jean II */
- if(numrates > 2)
- range.throughput = 5 * 1000 * 1000; /* ~5 Mb/s */
+ if (numrates > 2)
+ range->throughput = 5 * 1000 * 1000; /* ~5 Mb/s */
else
- range.throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */
-
- range.min_rts = 0;
- range.max_rts = 2347;
- range.min_frag = 256;
- range.max_frag = 2346;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- if (priv->has_wep) {
- range.max_encoding_tokens = ORINOCO_MAX_KEYS;
-
- range.encoding_size[0] = SMALL_KEY_SIZE;
- range.num_encoding_sizes = 1;
-
- if (priv->has_big_wep) {
- range.encoding_size[1] = LARGE_KEY_SIZE;
- range.num_encoding_sizes = 2;
- }
- } else {
- range.num_encoding_sizes = 0;
- range.max_encoding_tokens = 0;
- }
- orinoco_unlock(priv, &flags);
-
- range.min_pmp = 0;
- range.max_pmp = 65535000;
- range.min_pmt = 0;
- range.max_pmt = 65535 * 1000; /* ??? */
- range.pmp_flags = IW_POWER_PERIOD;
- range.pmt_flags = IW_POWER_TIMEOUT;
- range.pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
-
- range.num_txpower = 1;
- range.txpower[0] = 15; /* 15dBm */
- range.txpower_capa = IW_TXPOW_DBM;
-
- range.retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
- range.retry_flags = IW_RETRY_LIMIT;
- range.r_time_flags = IW_RETRY_LIFETIME;
- range.min_retry = 0;
- range.max_retry = 65535; /* ??? */
- range.min_r_time = 0;
- range.max_r_time = 65535 * 1000; /* ??? */
+ range->throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */
- if (copy_to_user(rrq->pointer, &range, sizeof(range)))
- return -EFAULT;
+ range->min_rts = 0;
+ range->max_rts = 2347;
+ range->min_frag = 256;
+ range->max_frag = 2346;
+
+ range->min_pmp = 0;
+ range->max_pmp = 65535000;
+ range->min_pmt = 0;
+ range->max_pmt = 65535 * 1000; /* ??? */
+ range->pmp_flags = IW_POWER_PERIOD;
+ range->pmt_flags = IW_POWER_TIMEOUT;
+ range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
+
+ range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
+ range->retry_flags = IW_RETRY_LIMIT;
+ range->r_time_flags = IW_RETRY_LIFETIME;
+ range->min_retry = 0;
+ range->max_retry = 65535; /* ??? */
+ range->min_r_time = 0;
+ range->max_r_time = 65535 * 1000; /* ??? */
TRACE_EXIT(dev->name);
return 0;
}
-static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *erq)
+static int orinoco_ioctl_setiwencode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *keybuf)
{
struct orinoco_private *priv = netdev_priv(dev);
int index = (erq->flags & IW_ENCODE_INDEX) - 1;
@@ -2775,8 +2773,7 @@
int enable = priv->wep_on;
int restricted = priv->wep_restrict;
u16 xlen = 0;
- int err = 0;
- char keybuf[ORINOCO_MAX_KEY_SIZE];
+ int err = -EINPROGRESS; /* Call commit handler */
unsigned long flags;
if (! priv->has_wep)
@@ -2789,9 +2786,6 @@
if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep )
return -E2BIG;
-
- if (copy_from_user(keybuf, erq->pointer, erq->length))
- return -EFAULT;
}
if (orinoco_lock(priv, &flags) != 0)
@@ -2865,12 +2859,14 @@
return err;
}
-static int orinoco_ioctl_getiwencode(struct net_device *dev, struct iw_point *erq)
+static int orinoco_ioctl_getiwencode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *keybuf)
{
struct orinoco_private *priv = netdev_priv(dev);
int index = (erq->flags & IW_ENCODE_INDEX) - 1;
u16 xlen = 0;
- char keybuf[ORINOCO_MAX_KEY_SIZE];
unsigned long flags;
if (! priv->has_wep)
@@ -2899,51 +2895,47 @@
memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE);
orinoco_unlock(priv, &flags);
-
- if (erq->pointer) {
- if (copy_to_user(erq->pointer, keybuf, xlen))
- return -EFAULT;
- }
-
return 0;
}
-static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq)
+static int orinoco_ioctl_setessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *essidbuf)
{
struct orinoco_private *priv = netdev_priv(dev);
- char essidbuf[IW_ESSID_MAX_SIZE+1];
unsigned long flags;
/* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
* anyway... - Jean II */
- memset(&essidbuf, 0, sizeof(essidbuf));
-
- if (erq->flags) {
- /* iwconfig includes the NUL in the specified length */
- if (erq->length > IW_ESSID_MAX_SIZE+1)
- return -E2BIG;
-
- if (copy_from_user(&essidbuf, erq->pointer, erq->length))
- return -EFAULT;
-
- essidbuf[IW_ESSID_MAX_SIZE] = '\0';
- }
+ /* Hum... Should not use Wireless Extension constant (may change),
+ * should use our own... - Jean II */
+ if (erq->length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- memcpy(priv->desired_essid, essidbuf, sizeof(priv->desired_essid));
+ /* NULL the string (for NULL termination & ESSID = ANY) - Jean II */
+ memset(priv->desired_essid, 0, sizeof(priv->desired_essid));
+
+ /* If not ANY, get the new ESSID */
+ if (erq->flags) {
+ memcpy(priv->desired_essid, essidbuf, erq->length);
+ }
orinoco_unlock(priv, &flags);
- return 0;
+ return -EINPROGRESS; /* Call commit handler */
}
-static int orinoco_ioctl_getessid(struct net_device *dev, struct iw_point *erq)
+static int orinoco_ioctl_getessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq,
+ char *essidbuf)
{
struct orinoco_private *priv = netdev_priv(dev);
- char essidbuf[IW_ESSID_MAX_SIZE+1];
int active;
int err = 0;
unsigned long flags;
@@ -2957,51 +2949,46 @@
} else {
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- memcpy(essidbuf, priv->desired_essid, sizeof(essidbuf));
+ memcpy(essidbuf, priv->desired_essid, IW_ESSID_MAX_SIZE + 1);
orinoco_unlock(priv, &flags);
}
erq->flags = 1;
erq->length = strlen(essidbuf) + 1;
- if (erq->pointer)
- if (copy_to_user(erq->pointer, essidbuf, erq->length))
- return -EFAULT;
TRACE_EXIT(dev->name);
return 0;
}
-static int orinoco_ioctl_setnick(struct net_device *dev, struct iw_point *nrq)
+static int orinoco_ioctl_setnick(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *nrq,
+ char *nickbuf)
{
struct orinoco_private *priv = netdev_priv(dev);
- char nickbuf[IW_ESSID_MAX_SIZE+1];
unsigned long flags;
if (nrq->length > IW_ESSID_MAX_SIZE)
return -E2BIG;
- memset(nickbuf, 0, sizeof(nickbuf));
-
- if (copy_from_user(nickbuf, nrq->pointer, nrq->length))
- return -EFAULT;
-
- nickbuf[nrq->length] = '\0';
-
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- memcpy(priv->nick, nickbuf, sizeof(priv->nick));
+ memset(priv->nick, 0, sizeof(priv->nick));
+ memcpy(priv->nick, nickbuf, nrq->length);
orinoco_unlock(priv, &flags);
- return 0;
+ return -EINPROGRESS; /* Call commit handler */
}
-static int orinoco_ioctl_getnick(struct net_device *dev, struct iw_point *nrq)
+static int orinoco_ioctl_getnick(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *nrq,
+ char *nickbuf)
{
struct orinoco_private *priv = netdev_priv(dev);
- char nickbuf[IW_ESSID_MAX_SIZE+1];
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
@@ -3012,17 +2999,18 @@
nrq->length = strlen(nickbuf)+1;
- if (copy_to_user(nrq->pointer, nickbuf, sizeof(nickbuf)))
- return -EFAULT;
-
return 0;
}
-static int orinoco_ioctl_setfreq(struct net_device *dev, struct iw_freq *frq)
+static int orinoco_ioctl_setfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *frq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
int chan = -1;
unsigned long flags;
+ int err = -EINPROGRESS; /* Call commit handler */
/* We can only use this in Ad-Hoc demo mode to set the operating
* frequency, or in IBSS mode to set the frequency where the IBSS
@@ -3055,10 +3043,33 @@
priv->channel = chan;
orinoco_unlock(priv, &flags);
+ return err;
+}
+
+static int orinoco_ioctl_getfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *frq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int tmp;
+
+ /* Locking done in there */
+ tmp = orinoco_hw_get_freq(priv);
+ if (tmp < 0) {
+ return tmp;
+ }
+
+ frq->m = tmp;
+ frq->e = 1;
+
return 0;
}
-static int orinoco_ioctl_getsens(struct net_device *dev, struct iw_param *srq)
+static int orinoco_ioctl_getsens(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *srq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
@@ -3084,7 +3095,10 @@
return 0;
}
-static int orinoco_ioctl_setsens(struct net_device *dev, struct iw_param *srq)
+static int orinoco_ioctl_setsens(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *srq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
int val = srq->value;
@@ -3101,10 +3115,13 @@
priv->ap_density = val;
orinoco_unlock(priv, &flags);
- return 0;
+ return -EINPROGRESS; /* Call commit handler */
}
-static int orinoco_ioctl_setrts(struct net_device *dev, struct iw_param *rrq)
+static int orinoco_ioctl_setrts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
int val = rrq->value;
@@ -3122,13 +3139,30 @@
priv->rts_thresh = val;
orinoco_unlock(priv, &flags);
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int orinoco_ioctl_getrts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ rrq->value = priv->rts_thresh;
+ rrq->disabled = (rrq->value == 2347);
+ rrq->fixed = 1;
+
return 0;
}
-static int orinoco_ioctl_setfrag(struct net_device *dev, struct iw_param *frq)
+static int orinoco_ioctl_setfrag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *frq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
+ int err = -EINPROGRESS; /* Call commit handler */
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
@@ -3160,11 +3194,14 @@
return err;
}
-static int orinoco_ioctl_getfrag(struct net_device *dev, struct iw_param *frq)
+static int orinoco_ioctl_getfrag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *frq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
- int err = 0;
+ int err;
u16 val;
unsigned long flags;
@@ -3197,10 +3234,12 @@
return err;
}
-static int orinoco_ioctl_setrate(struct net_device *dev, struct iw_param *rrq)
+static int orinoco_ioctl_setrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
int ratemode = -1;
int bitrate; /* 100s of kilobits */
int i;
@@ -3236,10 +3275,13 @@
priv->bitratemode = ratemode;
orinoco_unlock(priv, &flags);
- return err;
+ return -EINPROGRESS;
}
-static int orinoco_ioctl_getrate(struct net_device *dev, struct iw_param *rrq)
+static int orinoco_ioctl_getrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
@@ -3304,10 +3346,13 @@
return err;
}
-static int orinoco_ioctl_setpower(struct net_device *dev, struct iw_param *prq)
+static int orinoco_ioctl_setpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *prq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int err = 0;
+ int err = -EINPROGRESS; /* Call commit handler */
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
@@ -3356,7 +3401,10 @@
return err;
}
-static int orinoco_ioctl_getpower(struct net_device *dev, struct iw_param *prq)
+static int orinoco_ioctl_getpower(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *prq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
@@ -3404,7 +3452,10 @@
return err;
}
-static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq)
+static int orinoco_ioctl_getretry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
hermes_t *hw = &priv->hw;
@@ -3455,10 +3506,38 @@
return err;
}
-static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq)
+static int orinoco_ioctl_reset(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ if (! capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (info->cmd == (SIOCIWFIRSTPRIV + 0x1)) {
+ printk(KERN_DEBUG "%s: Forcing reset!\n", dev->name);
+
+ /* Firmware reset */
+ orinoco_reset(dev);
+ } else {
+ printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
+
+ schedule_work(&priv->reset_work);
+ }
+
+ return 0;
+}
+
+static int orinoco_ioctl_setibssport(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+
{
struct orinoco_private *priv = netdev_priv(dev);
- int val = *( (int *) wrq->u.name );
+ int val = *( (int *) extra );
unsigned long flags;
if (orinoco_lock(priv, &flags) != 0)
@@ -3470,28 +3549,28 @@
set_port_type(priv);
orinoco_unlock(priv, &flags);
- return 0;
+ return -EINPROGRESS; /* Call commit handler */
}
-static int orinoco_ioctl_getibssport(struct net_device *dev, struct iwreq *wrq)
+static int orinoco_ioctl_getibssport(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int *val = (int *)wrq->u.name;
- unsigned long flags;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
+ int *val = (int *) extra;
*val = priv->ibss_port;
- orinoco_unlock(priv, &flags);
-
return 0;
}
-static int orinoco_ioctl_setport3(struct net_device *dev, struct iwreq *wrq)
+static int orinoco_ioctl_setport3(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int val = *( (int *) wrq->u.name );
+ int val = *( (int *) extra );
int err = 0;
unsigned long flags;
@@ -3520,51 +3599,131 @@
err = -EINVAL;
}
- if (! err)
+ if (! err) {
/* Actually update the mode we are using */
set_port_type(priv);
+ err = -EINPROGRESS;
+ }
orinoco_unlock(priv, &flags);
return err;
}
-static int orinoco_ioctl_getport3(struct net_device *dev, struct iwreq *wrq)
+static int orinoco_ioctl_getport3(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int *val = (int *) extra;
+
+ *val = priv->prefer_port3;
+ return 0;
+}
+
+static int orinoco_ioctl_setpreamble(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- int *val = (int *)wrq->u.name;
unsigned long flags;
+ int val;
+
+ if (! priv->has_preamble)
+ return -EOPNOTSUPP;
+
+ /* 802.11b has recently defined some short preamble.
+ * Basically, the Phy header has been reduced in size.
+ * This increase performance, especially at high rates
+ * (the preamble is transmitted at 1Mb/s), unfortunately
+ * this give compatibility troubles... - Jean II */
+ val = *( (int *) extra );
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
- *val = priv->prefer_port3;
+ if (val)
+ priv->preamble = 1;
+ else
+ priv->preamble = 0;
+
orinoco_unlock(priv, &flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int orinoco_ioctl_getpreamble(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int *val = (int *) extra;
+
+ if (! priv->has_preamble)
+ return -EOPNOTSUPP;
+
+ *val = priv->preamble;
return 0;
}
+/* ioctl interface to hermes_read_ltv()
+ * To use with iwpriv, pass the RID as the token argument, e.g.
+ * iwpriv get_rid [0xfc00]
+ * At least Wireless Tools 25 is required to use iwpriv.
+ * For Wireless Tools 25 and 26 append "dummy" are the end. */
+static int orinoco_ioctl_getrid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int rid = data->flags;
+ u16 length;
+ int err;
+ unsigned long flags;
+
+ /* It's a "get" function, but we don't want users to access the
+ * WEP key and other raw firmware data */
+ if (! capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (rid < 0xfc00 || rid > 0xffff)
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length,
+ extra);
+ if (err)
+ goto out;
+
+ data->length = min_t(u16, HERMES_RECLEN_TO_BYTES(length),
+ MAX_RID_LEN);
+
+ out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
/* Spy is used for link quality/strength measurements in Ad-Hoc mode
* Jean II */
-static int orinoco_ioctl_setspy(struct net_device *dev, struct iw_point *srq)
+static int orinoco_ioctl_setspy(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *srq,
+ char *extra)
+
{
struct orinoco_private *priv = netdev_priv(dev);
- struct sockaddr address[IW_MAX_SPY];
+ struct sockaddr *address = (struct sockaddr *) extra;
int number = srq->length;
int i;
- int err = 0;
unsigned long flags;
- /* Check the number of addresses */
- if (number > IW_MAX_SPY)
- return -E2BIG;
-
- /* Get the data in the driver */
- if (srq->pointer) {
- if (copy_from_user(address, srq->pointer,
- sizeof(struct sockaddr) * number))
- return -EFAULT;
- }
-
/* Make sure nobody mess with the structure while we do */
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
@@ -3588,14 +3747,17 @@
/* Now, let the others play */
orinoco_unlock(priv, &flags);
- return err;
+ /* Do NOT call commit handler */
+ return 0;
}
-static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq)
+static int orinoco_ioctl_getspy(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *srq,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- struct sockaddr address[IW_MAX_SPY];
- struct iw_quality spy_stat[IW_MAX_SPY];
+ struct sockaddr *address = (struct sockaddr *) extra;
int number;
int i;
unsigned long flags;
@@ -3604,7 +3766,12 @@
return -EBUSY;
number = priv->spy_number;
- if ((number > 0) && (srq->pointer)) {
+ /* Create address struct */
+ for (i = 0; i < number; i++) {
+ memcpy(address[i].sa_data, priv->spy_address[i], ETH_ALEN);
+ address[i].sa_family = AF_UNIX;
+ }
+ if (number > 0) {
/* Create address struct */
for (i = 0; i < number; i++) {
memcpy(address[i].sa_data, priv->spy_address[i],
@@ -3615,344 +3782,153 @@
/* In theory, we should disable irqs while copying the stats
* because the rx path might update it in the middle...
* Bah, who care ? - Jean II */
- memcpy(&spy_stat, priv->spy_stat,
- sizeof(struct iw_quality) * IW_MAX_SPY);
- for (i=0; i < number; i++)
- priv->spy_stat[i].updated = 0;
+ memcpy(extra + (sizeof(struct sockaddr) * number),
+ priv->spy_stat, sizeof(struct iw_quality) * number);
}
+ /* Reset updated flags. */
+ for (i = 0; i < number; i++)
+ priv->spy_stat[i].updated = 0;
orinoco_unlock(priv, &flags);
- /* Push stuff to user space */
srq->length = number;
- if(copy_to_user(srq->pointer, address,
- sizeof(struct sockaddr) * number))
- return -EFAULT;
- if(copy_to_user(srq->pointer + (sizeof(struct sockaddr)*number),
- &spy_stat, sizeof(struct iw_quality) * number))
- return -EFAULT;
return 0;
}
-static int
-orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+/* Commit handler, called after set operations */
+static int orinoco_ioctl_commit(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
{
struct orinoco_private *priv = netdev_priv(dev);
- struct iwreq *wrq = (struct iwreq *)rq;
- int err = 0;
- int tmp;
- int changed = 0;
+ struct hermes *hw = &priv->hw;
unsigned long flags;
+ int err = 0;
- TRACE_ENTER(dev->name);
-
- /* In theory, we could allow most of the the SET stuff to be
- * done. In practice, the lapse of time at startup when the
- * card is not ready is very short, so why bother... Note
- * that netif_device_present is different from up/down
- * (ifconfig), when the device is not yet up, it is usually
- * already ready... Jean II */
- if (! netif_device_present(dev))
- return -ENODEV;
-
- switch (cmd) {
- case SIOCGIWNAME:
- strcpy(wrq->u.name, "IEEE 802.11-DS");
- break;
-
- case SIOCGIWAP:
- wrq->u.ap_addr.sa_family = ARPHRD_ETHER;
- err = orinoco_hw_get_bssid(priv, wrq->u.ap_addr.sa_data);
- break;
-
- case SIOCGIWRANGE:
- err = orinoco_ioctl_getiwrange(dev, &wrq->u.data);
- break;
-
- case SIOCSIWMODE:
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- switch (wrq->u.mode) {
- case IW_MODE_ADHOC:
- if (! (priv->has_ibss || priv->has_port3) )
- err = -EINVAL;
- else {
- priv->iw_mode = IW_MODE_ADHOC;
- changed = 1;
- }
- break;
-
- case IW_MODE_INFRA:
- priv->iw_mode = IW_MODE_INFRA;
- changed = 1;
- break;
-
- default:
- err = -EINVAL;
- break;
- }
- set_port_type(priv);
- orinoco_unlock(priv, &flags);
- break;
-
- case SIOCGIWMODE:
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- wrq->u.mode = priv->iw_mode;
- orinoco_unlock(priv, &flags);
- break;
-
- case SIOCSIWENCODE:
- err = orinoco_ioctl_setiwencode(dev, &wrq->u.encoding);
- if (! err)
- changed = 1;
- break;
-
- case SIOCGIWENCODE:
- if (! capable(CAP_NET_ADMIN)) {
- err = -EPERM;
- break;
- }
-
- err = orinoco_ioctl_getiwencode(dev, &wrq->u.encoding);
- break;
-
- case SIOCSIWESSID:
- err = orinoco_ioctl_setessid(dev, &wrq->u.essid);
- if (! err)
- changed = 1;
- break;
-
- case SIOCGIWESSID:
- err = orinoco_ioctl_getessid(dev, &wrq->u.essid);
- break;
-
- case SIOCSIWNICKN:
- err = orinoco_ioctl_setnick(dev, &wrq->u.data);
- if (! err)
- changed = 1;
- break;
-
- case SIOCGIWNICKN:
- err = orinoco_ioctl_getnick(dev, &wrq->u.data);
- break;
-
- case SIOCGIWFREQ:
- tmp = orinoco_hw_get_freq(priv);
- if (tmp < 0) {
- err = tmp;
- } else {
- wrq->u.freq.m = tmp;
- wrq->u.freq.e = 1;
- }
- break;
-
- case SIOCSIWFREQ:
- err = orinoco_ioctl_setfreq(dev, &wrq->u.freq);
- if (! err)
- changed = 1;
- break;
-
- case SIOCGIWSENS:
- err = orinoco_ioctl_getsens(dev, &wrq->u.sens);
- break;
-
- case SIOCSIWSENS:
- err = orinoco_ioctl_setsens(dev, &wrq->u.sens);
- if (! err)
- changed = 1;
- break;
-
- case SIOCGIWRTS:
- wrq->u.rts.value = priv->rts_thresh;
- wrq->u.rts.disabled = (wrq->u.rts.value == 2347);
- wrq->u.rts.fixed = 1;
- break;
-
- case SIOCSIWRTS:
- err = orinoco_ioctl_setrts(dev, &wrq->u.rts);
- if (! err)
- changed = 1;
- break;
-
- case SIOCSIWFRAG:
- err = orinoco_ioctl_setfrag(dev, &wrq->u.frag);
- if (! err)
- changed = 1;
- break;
-
- case SIOCGIWFRAG:
- err = orinoco_ioctl_getfrag(dev, &wrq->u.frag);
- break;
-
- case SIOCSIWRATE:
- err = orinoco_ioctl_setrate(dev, &wrq->u.bitrate);
- if (! err)
- changed = 1;
- break;
-
- case SIOCGIWRATE:
- err = orinoco_ioctl_getrate(dev, &wrq->u.bitrate);
- break;
-
- case SIOCSIWPOWER:
- err = orinoco_ioctl_setpower(dev, &wrq->u.power);
- if (! err)
- changed = 1;
- break;
-
- case SIOCGIWPOWER:
- err = orinoco_ioctl_getpower(dev, &wrq->u.power);
- break;
+ if (!priv->open)
+ return 0;
- case SIOCGIWTXPOW:
- /* The card only supports one tx power, so this is easy */
- wrq->u.txpower.value = 15; /* dBm */
- wrq->u.txpower.fixed = 1;
- wrq->u.txpower.disabled = 0;
- wrq->u.txpower.flags = IW_TXPOW_DBM;
- break;
+ if (priv->broken_disableport) {
+ orinoco_reset(dev);
+ return 0;
+ }
- case SIOCSIWRETRY:
- err = -EOPNOTSUPP;
- break;
+ if (orinoco_lock(priv, &flags) != 0)
+ return err;
- case SIOCGIWRETRY:
- err = orinoco_ioctl_getretry(dev, &wrq->u.retry);
- break;
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to disable port "
+ "while reconfiguring card\n", dev->name);
+ priv->broken_disableport = 1;
+ goto out;
+ }
- case SIOCSIWSPY:
- err = orinoco_ioctl_setspy(dev, &wrq->u.data);
- break;
+ err = __orinoco_program_rids(dev);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to reconfigure card\n",
+ dev->name);
+ goto out;
+ }
- case SIOCGIWSPY:
- err = orinoco_ioctl_getspy(dev, &wrq->u.data);
- break;
-
- case SIOCGIWPRIV:
- if (wrq->u.data.pointer) {
- struct iw_priv_args privtab[] = {
- { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
- { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
- { SIOCIWFIRSTPRIV + 0x2,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_port3" },
- { SIOCIWFIRSTPRIV + 0x3, 0,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_port3" },
- { SIOCIWFIRSTPRIV + 0x4,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_preamble" },
- { SIOCIWFIRSTPRIV + 0x5, 0,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_preamble" },
- { SIOCIWFIRSTPRIV + 0x6,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- 0, "set_ibssport" },
- { SIOCIWFIRSTPRIV + 0x7, 0,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_ibssport" },
- };
-
- wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
- if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
- err = -EFAULT;
- }
- break;
-
- case SIOCIWFIRSTPRIV + 0x0: /* force_reset */
- case SIOCIWFIRSTPRIV + 0x1: /* card_reset */
- if (! capable(CAP_NET_ADMIN)) {
- err = -EPERM;
- break;
- }
-
- printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
+ dev->name);
+ goto out;
+ }
+ out:
+ if (err) {
+ printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
schedule_work(&priv->reset_work);
- break;
-
- case SIOCIWFIRSTPRIV + 0x2: /* set_port3 */
- if (! capable(CAP_NET_ADMIN)) {
- err = -EPERM;
- break;
- }
-
- err = orinoco_ioctl_setport3(dev, wrq);
- if (! err)
- changed = 1;
- break;
-
- case SIOCIWFIRSTPRIV + 0x3: /* get_port3 */
- err = orinoco_ioctl_getport3(dev, wrq);
- break;
-
- case SIOCIWFIRSTPRIV + 0x4: /* set_preamble */
- if (! capable(CAP_NET_ADMIN)) {
- err = -EPERM;
- break;
- }
-
- /* 802.11b has recently defined some short preamble.
- * Basically, the Phy header has been reduced in size.
- * This increase performance, especially at high rates
- * (the preamble is transmitted at 1Mb/s), unfortunately
- * this give compatibility troubles... - Jean II */
- if(priv->has_preamble) {
- int val = *( (int *) wrq->u.name );
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- if (val)
- priv->preamble = 1;
- else
- priv->preamble = 0;
- orinoco_unlock(priv, &flags);
- changed = 1;
- } else
- err = -EOPNOTSUPP;
- break;
+ err = 0;
+ }
- case SIOCIWFIRSTPRIV + 0x5: /* get_preamble */
- if(priv->has_preamble) {
- int *val = (int *)wrq->u.name;
-
- if (orinoco_lock(priv, &flags) != 0)
- return -EBUSY;
- *val = priv->preamble;
- orinoco_unlock(priv, &flags);
- } else
- err = -EOPNOTSUPP;
- break;
- case SIOCIWFIRSTPRIV + 0x6: /* set_ibssport */
- if (! capable(CAP_NET_ADMIN)) {
- err = -EPERM;
- break;
- }
+ orinoco_unlock(priv, &flags);
+ return err;
+}
- err = orinoco_ioctl_setibssport(dev, wrq);
- if (! err)
- changed = 1;
- break;
+static const struct iw_priv_args orinoco_privtab[] = {
+ { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
+ { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
+ { SIOCIWFIRSTPRIV + 0x2, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_port3" },
+ { SIOCIWFIRSTPRIV + 0x3, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_port3" },
+ { SIOCIWFIRSTPRIV + 0x4, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_preamble" },
+ { SIOCIWFIRSTPRIV + 0x5, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_preamble" },
+ { SIOCIWFIRSTPRIV + 0x6, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_ibssport" },
+ { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_ibssport" },
+ { SIOCIWFIRSTPRIV + 0x9, 0, IW_PRIV_TYPE_BYTE | MAX_RID_LEN,
+ "get_rid" },
+};
- case SIOCIWFIRSTPRIV + 0x7: /* get_ibssport */
- err = orinoco_ioctl_getibssport(dev, wrq);
- break;
- default:
- err = -EOPNOTSUPP;
- }
-
- if (! err && changed && netif_running(dev)) {
- err = orinoco_reconfigure(dev);
- }
+/*
+ * Structures to export the Wireless Handlers
+ */
+
+static const iw_handler orinoco_handler[] = {
+ [SIOCSIWCOMMIT-SIOCIWFIRST] (iw_handler) orinoco_ioctl_commit,
+ [SIOCGIWNAME -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getname,
+ [SIOCSIWFREQ -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setfreq,
+ [SIOCGIWFREQ -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getfreq,
+ [SIOCSIWMODE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setmode,
+ [SIOCGIWMODE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getmode,
+ [SIOCSIWSENS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setsens,
+ [SIOCGIWSENS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getsens,
+ [SIOCGIWRANGE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getiwrange,
+ [SIOCSIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setspy,
+ [SIOCGIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getspy,
+ [SIOCGIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getwap,
+ [SIOCSIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setessid,
+ [SIOCGIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getessid,
+ [SIOCSIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setnick,
+ [SIOCGIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getnick,
+ [SIOCSIWRATE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setrate,
+ [SIOCGIWRATE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getrate,
+ [SIOCSIWRTS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setrts,
+ [SIOCGIWRTS -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getrts,
+ [SIOCSIWFRAG -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setfrag,
+ [SIOCGIWFRAG -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getfrag,
+ [SIOCGIWRETRY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getretry,
+ [SIOCSIWENCODE-SIOCIWFIRST] (iw_handler) orinoco_ioctl_setiwencode,
+ [SIOCGIWENCODE-SIOCIWFIRST] (iw_handler) orinoco_ioctl_getiwencode,
+ [SIOCSIWPOWER -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setpower,
+ [SIOCGIWPOWER -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getpower,
+};
- TRACE_EXIT(dev->name);
- return err;
-}
+/*
+ Added typecasting since we no longer use iwreq_data -- Moustafa
+ */
+static const iw_handler orinoco_private_handler[] = {
+ [0] (iw_handler) orinoco_ioctl_reset,
+ [1] (iw_handler) orinoco_ioctl_reset,
+ [2] (iw_handler) orinoco_ioctl_setport3,
+ [3] (iw_handler) orinoco_ioctl_getport3,
+ [4] (iw_handler) orinoco_ioctl_setpreamble,
+ [5] (iw_handler) orinoco_ioctl_getpreamble,
+ [6] (iw_handler) orinoco_ioctl_setibssport,
+ [7] (iw_handler) orinoco_ioctl_getibssport,
+ [9] (iw_handler) orinoco_ioctl_getrid,
+};
+static const struct iw_handler_def orinoco_handler_def = {
+ .num_standard = ARRAY_SIZE(orinoco_handler),
+ .num_private = ARRAY_SIZE(orinoco_private_handler),
+ .num_private_args = ARRAY_SIZE(orinoco_privtab),
+ .standard = orinoco_handler,
+ .private = orinoco_private_handler,
+ .private_args = orinoco_privtab,
+};
/********************************************************************/
/* Debugging */
^ permalink raw reply
* [PATCH 4/9] orinoco: basic ethtool support
From: Christoph Hellwig @ 2005-06-18 23:27 UTC (permalink / raw)
To: jgarzik, proski, hermes; +Cc: netdev
I completely reimplemented this based on ethtool_ops, CVS has an
ioctl-based version.
Index: linux-2.6/drivers/net/wireless/orinoco.c
===================================================================
--- linux-2.6.orig/drivers/net/wireless/orinoco.c 2005-06-19 01:03:42.000000000 +0200
+++ linux-2.6/drivers/net/wireless/orinoco.c 2005-06-19 01:03:43.000000000 +0200
@@ -462,6 +462,7 @@
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
#include <net/ieee80211.h>
@@ -542,6 +543,7 @@
#define MAX_RID_LEN 1024
static const struct iw_handler_def orinoco_handler_def;
+static struct ethtool_ops orinoco_ethtool_ops;
/********************************************************************/
/* Data tables */
@@ -2412,6 +2414,7 @@
dev->tx_timeout = orinoco_tx_timeout;
dev->watchdog_timeo = HZ; /* 1 second timeout */
dev->get_stats = orinoco_get_stats;
+ dev->ethtool_ops = &orinoco_ethtool_ops;
dev->get_wireless_stats = orinoco_get_wireless_stats;
dev->wireless_handlers = (struct iw_handler_def *)&orinoco_handler_def;
dev->change_mtu = orinoco_change_mtu;
@@ -3930,6 +3933,27 @@
.private_args = orinoco_privtab,
};
+static void orinoco_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1);
+ strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1);
+ strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1);
+ if (dev->class_dev.dev)
+ strncpy(info->bus_info, dev->class_dev.dev->bus_id,
+ sizeof(info->bus_info) - 1);
+ else
+ snprintf(info->bus_info, sizeof(info->bus_info) - 1,
+ "PCMCIA %p", priv->hw.iobase);
+}
+
+static struct ethtool_ops orinoco_ethtool_ops = {
+ .get_drvinfo = orinoco_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+};
+
/********************************************************************/
/* Debugging */
/********************************************************************/
^ permalink raw reply
* [PATCH 5/9] orinoco: manual roaming for Symbol and Intersilfirmware
From: Christoph Hellwig @ 2005-06-18 23:27 UTC (permalink / raw)
To: jgarzik, proski, hermes; +Cc: netdev
Patch from Pavel Roskin
Index: linux-2.6/drivers/net/wireless/orinoco.h
===================================================================
--- linux-2.6.orig/drivers/net/wireless/orinoco.h 2005-06-19 01:03:36.000000000 +0200
+++ linux-2.6/drivers/net/wireless/orinoco.h 2005-06-19 01:03:47.000000000 +0200
@@ -22,6 +22,8 @@
#define WIRELESS_SPY // enable iwspy support
+#define MAX_SCAN_LEN 4096
+
#define ORINOCO_MAX_KEY_SIZE 14
#define ORINOCO_MAX_KEYS 4
@@ -48,6 +50,7 @@
/* driver state */
int open;
u16 last_linkstatus;
+ struct work_struct join_work;
/* Net device stuff */
struct net_device *ndev;
@@ -84,6 +87,8 @@
int bitratemode;
char nick[IW_ESSID_MAX_SIZE+1];
char desired_essid[IW_ESSID_MAX_SIZE+1];
+ char desired_bssid[ETH_ALEN];
+ int bssid_fixed;
u16 frag_thresh, mwo_robust;
u16 channel;
u16 ap_density, rts_thresh;
Index: linux-2.6/drivers/net/wireless/orinoco.c
===================================================================
--- linux-2.6.orig/drivers/net/wireless/orinoco.c 2005-06-19 01:03:43.000000000 +0200
+++ linux-2.6/drivers/net/wireless/orinoco.c 2005-06-19 01:03:47.000000000 +0200
@@ -1247,6 +1247,75 @@
dev->name, s, status);
}
+/* Search scan results for requested BSSID, join it if found */
+static void orinoco_join_ap(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+ unsigned long flags;
+ struct join_req {
+ u8 bssid[ETH_ALEN];
+ u16 channel;
+ } __attribute__ ((packed)) req;
+ const int atom_len = offsetof(struct prism2_scan_apinfo, atim);
+ struct prism2_scan_apinfo *atom;
+ int offset = 4;
+ u8 *buf;
+ u16 len;
+
+ /* Allocate buffer for scan results */
+ buf = kmalloc(MAX_SCAN_LEN, GFP_KERNEL);
+ if (! buf)
+ return;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ goto out;
+
+ /* Sanity checks in case user changed something in the meantime */
+ if (! priv->bssid_fixed)
+ goto out;
+
+ if (strlen(priv->desired_essid) == 0)
+ goto out;
+
+ /* Read scan results from the firmware */
+ err = hermes_read_ltv(hw, USER_BAP,
+ HERMES_RID_SCANRESULTSTABLE,
+ MAX_SCAN_LEN, &len, buf);
+ if (err) {
+ printk(KERN_ERR "%s: Cannot read scan results\n",
+ dev->name);
+ goto out;
+ }
+
+ len = HERMES_RECLEN_TO_BYTES(len);
+
+ /* Go through the scan results looking for the channel of the AP
+ * we were requested to join */
+ for (; offset + atom_len <= len; offset += atom_len) {
+ atom = (struct prism2_scan_apinfo *) (buf + offset);
+ if (memcmp(&atom->bssid, priv->desired_bssid, ETH_ALEN) == 0)
+ goto found;
+ }
+
+ DEBUG(1, "%s: Requested AP not found in scan results\n",
+ dev->name);
+ goto out;
+
+ found:
+ memcpy(req.bssid, priv->desired_bssid, ETH_ALEN);
+ req.channel = atom->channel; /* both are little-endian */
+ err = HERMES_WRITE_RECORD(hw, USER_BAP, HERMES_RID_CNFJOINREQUEST,
+ &req);
+ if (err)
+ printk(KERN_ERR "%s: Error issuing join request\n", dev->name);
+
+ out:
+ kfree(buf);
+ orinoco_unlock(priv, &flags);
+}
+
static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
{
struct orinoco_private *priv = netdev_priv(dev);
@@ -1477,6 +1546,36 @@
return err;
}
+/* Set fixed AP address */
+static int __orinoco_hw_set_wap(struct orinoco_private *priv)
+{
+ int roaming_flag;
+ int err = 0;
+ hermes_t *hw = &priv->hw;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ /* not supported */
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ if (priv->bssid_fixed)
+ roaming_flag = 2;
+ else
+ roaming_flag = 1;
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFROAMINGMODE,
+ roaming_flag);
+ break;
+ case FIRMWARE_TYPE_SYMBOL:
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFMANDATORYBSSID_SYMBOL,
+ &priv->desired_bssid);
+ break;
+ }
+ return err;
+}
+
/* Change the WEP keys and/or the current keys. Can be called
* either from __orinoco_hw_setup_wep() or directly from
* orinoco_ioctl_setiwencode(). In the later case the association
@@ -1662,6 +1761,13 @@
}
}
+ /* Set the desired BSSID */
+ err = __orinoco_hw_set_wap(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting AP address\n",
+ dev->name, err);
+ return err;
+ }
/* Set the desired ESSID */
idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
@@ -2432,6 +2538,7 @@
* before anything else touches the
* hardware */
INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev);
+ INIT_WORK(&priv->join_work, (void (*)(void *))orinoco_join_ap, dev);
netif_carrier_off(dev);
priv->last_linkstatus = 0xffff;
@@ -2593,6 +2700,67 @@
return 0;
}
+static int orinoco_ioctl_setwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = -EINPROGRESS; /* Call commit handler */
+ unsigned long flags;
+ static const u8 off_addr[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ static const u8 any_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* Enable automatic roaming - no sanity checks are needed */
+ if (memcmp(&ap_addr->sa_data, off_addr, ETH_ALEN) == 0 ||
+ memcmp(&ap_addr->sa_data, any_addr, ETH_ALEN) == 0) {
+ priv->bssid_fixed = 0;
+ memset(priv->desired_bssid, 0, ETH_ALEN);
+
+ /* "off" means keep existing connection */
+ if (ap_addr->sa_data[0] == 0) {
+ __orinoco_hw_set_wap(priv);
+ err = 0;
+ }
+ goto out;
+ }
+
+ if (priv->firmware_type == FIRMWARE_TYPE_AGERE) {
+ printk(KERN_WARNING "%s: Lucent/Agere firmware doesn't "
+ "support manual roaming\n",
+ dev->name);
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ if (priv->iw_mode != IW_MODE_INFRA) {
+ printk(KERN_WARNING "%s: Manual roaming supported only in "
+ "managed mode\n", dev->name);
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ /* Intersil firmware hangs without Desired ESSID */
+ if (priv->firmware_type == FIRMWARE_TYPE_INTERSIL &&
+ strlen(priv->desired_essid) == 0) {
+ printk(KERN_WARNING "%s: Desired ESSID must be set for "
+ "manual roaming\n", dev->name);
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ /* Finally, enable manual roaming */
+ priv->bssid_fixed = 1;
+ memcpy(priv->desired_bssid, &ap_addr->sa_data, ETH_ALEN);
+
+ out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
static int orinoco_ioctl_getwap(struct net_device *dev,
struct iw_request_info *info,
struct sockaddr *ap_addr,
@@ -3890,6 +4058,7 @@
[SIOCGIWRANGE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getiwrange,
[SIOCSIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setspy,
[SIOCGIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getspy,
+ [SIOCSIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setwap,
[SIOCGIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getwap,
[SIOCSIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setessid,
[SIOCGIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getessid,
^ permalink raw reply
* [PATCH 6/9] orinoco: scanning support
From: Christoph Hellwig @ 2005-06-18 23:27 UTC (permalink / raw)
To: jgarzik, proski, hermes; +Cc: netdev
Patch from Pavel Roskin
Index: linux-2.6/drivers/net/wireless/orinoco.c
===================================================================
--- linux-2.6.orig/drivers/net/wireless/orinoco.c 2005-06-19 01:03:47.000000000 +0200
+++ linux-2.6/drivers/net/wireless/orinoco.c 2005-06-19 01:03:51.000000000 +0200
@@ -514,6 +514,10 @@
/* Internal constants */
/********************************************************************/
+/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
+static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
+#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
+
#define ORINOCO_MIN_MTU 256
#define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD)
@@ -579,25 +583,42 @@
/* Data types */
/********************************************************************/
-struct header_struct {
- /* 802.3 */
- u8 dest[ETH_ALEN];
- u8 src[ETH_ALEN];
- u16 len;
- /* 802.2 */
+/* Used in Event handling.
+ * We avoid nested structres as they break on ARM -- Moustafa */
+struct hermes_tx_descriptor_802_11 {
+ /* hermes_tx_descriptor */
+ u16 status;
+ u16 reserved1;
+ u16 reserved2;
+ u32 sw_support;
+ u8 retry_count;
+ u8 tx_rate;
+ u16 tx_control;
+
+ /* ieee802_11_hdr */
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+ u16 data_len;
+
+ /* ethhdr */
+ unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
+ unsigned char h_source[ETH_ALEN]; /* source ether addr */
+ unsigned short h_proto; /* packet type ID field */
+
+ /* p8022_hdr */
u8 dsap;
u8 ssap;
u8 ctrl;
- /* SNAP */
u8 oui[3];
+
u16 ethertype;
} __attribute__ ((packed));
-/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
-u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
-
-#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
-
struct hermes_rx_descriptor {
u16 status;
u32 time;
@@ -958,26 +979,55 @@
struct orinoco_private *priv = netdev_priv(dev);
struct net_device_stats *stats = &priv->stats;
u16 fid = hermes_read_regn(hw, TXCOMPLFID);
- struct hermes_tx_descriptor desc;
+ struct hermes_tx_descriptor_802_11 hdr;
int err = 0;
if (fid == DUMMY_FID)
return; /* Nothing's really happened */
- err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0);
+ /* Read the frame header */
+ err = hermes_bap_pread(hw, IRQ_BAP, &hdr,
+ sizeof(struct hermes_tx_descriptor) +
+ sizeof(struct ieee80211_hdr),
+ fid, 0);
+
+ hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+ stats->tx_errors++;
+
if (err) {
printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
"(FID=%04X error %d)\n",
dev->name, fid, err);
- } else {
- DEBUG(1, "%s: Tx error, status %d\n",
- dev->name, le16_to_cpu(desc.status));
+ return;
}
- stats->tx_errors++;
+ DEBUG(1, "%s: Tx error, err %d (FID=%04X)\n", dev->name,
+ err, fid);
+
+ /* We produce a TXDROP event only for retry or lifetime
+ * exceeded, because that's the only status that really mean
+ * that this particular node went away.
+ * Other errors means that *we* screwed up. - Jean II */
+ hdr.status = le16_to_cpu(hdr.status);
+ if (hdr.status & (HERMES_TXSTAT_RETRYERR | HERMES_TXSTAT_AGEDERR)) {
+ union iwreq_data wrqu;
+
+ /* Copy 802.11 dest address.
+ * We use the 802.11 header because the frame may
+ * not be 802.3 or may be mangled...
+ * In Ad-Hoc mode, it will be the node address.
+ * In managed mode, it will be most likely the AP addr
+ * User space will figure out how to convert it to
+ * whatever it needs (IP address or else).
+ * - Jean II */
+ memcpy(wrqu.addr.sa_data, hdr.addr1, ETH_ALEN);
+ wrqu.addr.sa_family = ARPHRD_ETHER;
+
+ /* Send event to user space */
+ wireless_send_event(dev, IWEVTXDROP, &wrqu, NULL);
+ }
netif_wake_queue(dev);
- hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
}
static void orinoco_tx_timeout(struct net_device *dev)
@@ -1316,6 +1366,30 @@
orinoco_unlock(priv, &flags);
}
+/* Send new BSSID to userspace */
+static void orinoco_send_wevents(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ union iwreq_data wrqu;
+ int err;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return;
+
+ err = hermes_read_ltv(hw, IRQ_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, wrqu.ap_addr.sa_data);
+ if (err != 0)
+ return;
+
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+
+ /* Send event to user space */
+ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+ orinoco_unlock(priv, &flags);
+}
+
static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
{
struct orinoco_private *priv = netdev_priv(dev);
@@ -1395,6 +1469,15 @@
break;
newstatus = le16_to_cpu(linkstatus.linkstatus);
+ /* Symbol firmware uses "out of range" to signal that
+ * the hostscan frame can be requested. */
+ if (newstatus == HERMES_LINKSTATUS_AP_OUT_OF_RANGE &&
+ priv->firmware_type == FIRMWARE_TYPE_SYMBOL &&
+ priv->has_hostscan && priv->scan_inprogress) {
+ hermes_inquire(hw, HERMES_INQ_HOSTSCAN_SYMBOL);
+ break;
+ }
+
connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
|| (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
|| (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
@@ -1404,12 +1487,89 @@
else if (!ignore_disconnect)
netif_carrier_off(dev);
- if (newstatus != priv->last_linkstatus)
+ if (newstatus != priv->last_linkstatus) {
+ priv->last_linkstatus = newstatus;
print_linkstatus(dev, newstatus);
+ /* The info frame contains only one word which is the
+ * status (see hermes.h). The status is pretty boring
+ * in itself, that's why we export the new BSSID...
+ * Jean II */
+ schedule_work(&priv->wevent_work);
+ }
+ }
+ break;
+ case HERMES_INQ_SCAN:
+ if (!priv->scan_inprogress && priv->bssid_fixed &&
+ priv->firmware_type == FIRMWARE_TYPE_INTERSIL) {
+ schedule_work(&priv->join_work);
+ break;
+ }
+ /* fall through */
+ case HERMES_INQ_HOSTSCAN:
+ case HERMES_INQ_HOSTSCAN_SYMBOL: {
+ /* Result of a scanning. Contains information about
+ * cells in the vicinity - Jean II */
+ union iwreq_data wrqu;
+ unsigned char *buf;
+
+ /* Sanity check */
+ if (len > 4096) {
+ printk(KERN_WARNING "%s: Scan results too large (%d bytes)\n",
+ dev->name, len);
+ break;
+ }
+
+ /* We are a strict producer. If the previous scan results
+ * have not been consumed, we just have to drop this
+ * frame. We can't remove the previous results ourselves,
+ * that would be *very* racy... Jean II */
+ if (priv->scan_result != NULL) {
+ printk(KERN_WARNING "%s: Previous scan results not consumed, dropping info frame.\n", dev->name);
+ break;
+ }
+
+ /* Allocate buffer for results */
+ buf = kmalloc(len, GFP_ATOMIC);
+ if (buf == NULL)
+ /* No memory, so can't printk()... */
+ break;
+
+ /* Read scan data */
+ err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len,
+ infofid, sizeof(info));
+ if (err)
+ break;
- priv->last_linkstatus = newstatus;
+#ifdef ORINOCO_DEBUG
+ {
+ int i;
+ printk(KERN_DEBUG "Scan result [%02X", buf[0]);
+ for(i = 1; i < (len * 2); i++)
+ printk(":%02X", buf[i]);
+ printk("]\n");
+ }
+#endif /* ORINOCO_DEBUG */
+
+ /* Allow the clients to access the results */
+ priv->scan_len = len;
+ priv->scan_result = buf;
+
+ /* Send an empty event to user space.
+ * We don't send the received data on the event because
+ * it would require us to do complex transcoding, and
+ * we want to minimise the work done in the irq handler
+ * Use a request to extract the data - Jean II */
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
}
break;
+ case HERMES_INQ_SEC_STAT_AGERE:
+ /* Security status (Agere specific) */
+ /* Ignore this frame for now */
+ if (priv->firmware_type == FIRMWARE_TYPE_AGERE)
+ break;
+ /* fall through */
default:
printk(KERN_DEBUG "%s: Unknown information frame received: "
"type 0x%04x, length %d\n", dev->name, type, len);
@@ -2010,6 +2170,11 @@
orinoco_unlock(priv, &flags);
+ /* Scanning support: Cleanup of driver struct */
+ kfree(priv->scan_result);
+ priv->scan_result = NULL;
+ priv->scan_inprogress = 0;
+
if (priv->hard_reset) {
err = (*priv->hard_reset)(priv);
if (err) {
@@ -2248,6 +2413,7 @@
priv->has_mwo = (firmver >= 0x60000);
priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
priv->ibss_port = 1;
+ priv->has_hostscan = (firmver >= 0x8000a);
/* Tested with Agere firmware :
* 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
@@ -2293,6 +2459,8 @@
priv->ibss_port = 4;
priv->broken_disableport = (firmver == 0x25013) ||
(firmver >= 0x30000 && firmver <= 0x31000);
+ priv->has_hostscan = (firmver >= 0x31001) ||
+ (firmver >= 0x29057 && firmver < 0x30000);
/* Tested with Intel firmware : 0x20015 => Jean II */
/* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
break;
@@ -2312,6 +2480,7 @@
priv->has_ibss = (firmver >= 0x000700); /* FIXME */
priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
priv->has_pm = (firmver >= 0x000700);
+ priv->has_hostscan = (firmver >= 0x010301);
if (firmver >= 0x000800)
priv->ibss_port = 0;
@@ -2539,6 +2708,7 @@
* hardware */
INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev);
INIT_WORK(&priv->join_work, (void (*)(void *))orinoco_join_ap, dev);
+ INIT_WORK(&priv->wevent_work, (void (*)(void *))orinoco_send_wevents, dev);
netif_carrier_off(dev);
priv->last_linkstatus = 0xffff;
@@ -2549,6 +2719,9 @@
void free_orinocodev(struct net_device *dev)
{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ kfree(priv->scan_result);
free_netdev(dev);
}
@@ -3967,6 +4140,332 @@
return 0;
}
+/* Trigger a scan (look for other cells in the vicinity */
+static int orinoco_ioctl_setscan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *srq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ unsigned long flags;
+
+ /* Note : you may have realised that, as this is a SET operation,
+ * this is priviledged and therefore a normal user can't
+ * perform scanning.
+ * This is not an error, while the device perform scanning,
+ * traffic doesn't flow, so it's a perfect DoS...
+ * Jean II */
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* Scanning with port 0 disabled would fail */
+ if (!netif_running(dev)) {
+ err = -ENETDOWN;
+ goto out;
+ }
+
+ /* In monitor mode, the scan results are always empty.
+ * Probe responses are passed to the driver as received
+ * frames and could be processed in software. */
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ /* Note : because we don't lock out the irq handler, the way
+ * we access scan variables in priv is critical.
+ * o scan_inprogress : not touched by irq handler
+ * o scan_mode : not touched by irq handler
+ * o scan_result : irq is strict producer, non-irq is strict
+ * consumer.
+ * o scan_len : synchronised with scan_result
+ * Before modifying anything on those variables, please think hard !
+ * Jean II */
+
+ /* If there is still some left-over scan results, get rid of it */
+ if (priv->scan_result != NULL) {
+ /* What's likely is that a client did crash or was killed
+ * between triggering the scan request and reading the
+ * results, so we need to reset everything.
+ * Some clients that are too slow may suffer from that...
+ * Jean II */
+ kfree(priv->scan_result);
+ priv->scan_result = NULL;
+ }
+
+ /* Save flags */
+ priv->scan_mode = srq->flags;
+
+ /* Always trigger scanning, even if it's in progress.
+ * This way, if the info frame get lost, we will recover somewhat
+ * gracefully - Jean II */
+
+ if (priv->has_hostscan) {
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_SYMBOL:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFHOSTSCAN_SYMBOL,
+ HERMES_HOSTSCAN_SYMBOL_ONCE |
+ HERMES_HOSTSCAN_SYMBOL_BCAST);
+ break;
+ case FIRMWARE_TYPE_INTERSIL: {
+ u16 req[3];
+
+ req[0] = cpu_to_le16(0x3fff); /* All channels */
+ req[1] = cpu_to_le16(0x0001); /* rate 1 Mbps */
+ req[2] = 0; /* Any ESSID */
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFHOSTSCAN, &req);
+ }
+ break;
+ case FIRMWARE_TYPE_AGERE:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSCANSSID_AGERE,
+ 0); /* Any ESSID */
+ if (err)
+ break;
+
+ err = hermes_inquire(hw, HERMES_INQ_SCAN);
+ break;
+ }
+ } else
+ err = hermes_inquire(hw, HERMES_INQ_SCAN);
+
+ /* One more client */
+ if (! err)
+ priv->scan_inprogress = 1;
+
+ out:
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+/* Translate scan data returned from the card to a card independant
+ * format that the Wireless Tools will understand - Jean II */
+static inline int orinoco_translate_scan(struct net_device *dev,
+ char *buffer,
+ char *scan,
+ int scan_len)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int offset; /* In the scan data */
+ union hermes_scan_info *atom;
+ int atom_len;
+ u16 capabilities;
+ u16 channel;
+ struct iw_event iwe; /* Temporary buffer */
+ char * current_ev = buffer;
+ char * end_buf = buffer + IW_SCAN_MAX_DATA;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ atom_len = sizeof(struct agere_scan_apinfo);
+ offset = 0;
+ break;
+ case FIRMWARE_TYPE_SYMBOL:
+ /* Lack of documentation necessitates this hack.
+ * Different firmwares have 68 or 76 byte long atoms.
+ * We try modulo first. If the length divides by both,
+ * we check what would be the channel in the second
+ * frame for a 68-byte atom. 76-byte atoms have 0 there.
+ * Valid channel cannot be 0. */
+ if (scan_len % 76)
+ atom_len = 68;
+ else if (scan_len % 68)
+ atom_len = 76;
+ else if (scan_len >= 1292 && scan[68] == 0)
+ atom_len = 76;
+ else
+ atom_len = 68;
+ offset = 0;
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ offset = 4;
+ if (priv->has_hostscan)
+ atom_len = scan[0] + (scan[1] << 8);
+ else
+ atom_len = offsetof(struct prism2_scan_apinfo, atim);
+ break;
+ default:
+ return 0;
+ }
+
+ /* Check that we got an whole number of atoms */
+ if ((scan_len - offset) % atom_len) {
+ printk(KERN_ERR "%s: Unexpected scan data length %d, "
+ "atom_len %d, offset %d\n", dev->name, scan_len,
+ atom_len, offset);
+ return 0;
+ }
+
+ /* Read the entries one by one */
+ for (; offset + atom_len <= scan_len; offset += atom_len) {
+ /* Get next atom */
+ atom = (union hermes_scan_info *) (scan + offset);
+
+ /* First entry *MUST* be the AP MAC address */
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, atom->a.bssid, ETH_ALEN);
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
+
+ /* Other entries will be displayed in the order we give them */
+
+ /* Add the ESSID */
+ iwe.u.data.length = le16_to_cpu(atom->a.essid_len);
+ if (iwe.u.data.length > 32)
+ iwe.u.data.length = 32;
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid);
+
+ /* Add mode */
+ iwe.cmd = SIOCGIWMODE;
+ capabilities = le16_to_cpu(atom->a.capabilities);
+ if (capabilities & 0x3) {
+ if (capabilities & 0x1)
+ iwe.u.mode = IW_MODE_MASTER;
+ else
+ iwe.u.mode = IW_MODE_ADHOC;
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN);
+ }
+
+ channel = atom->s.channel;
+ if ( (channel >= 1) && (channel <= NUM_CHANNELS) ) {
+ /* Add frequency */
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = channel_frequency[channel-1] * 100000;
+ iwe.u.freq.e = 1;
+ current_ev = iwe_stream_add_event(current_ev, end_buf,
+ &iwe, IW_EV_FREQ_LEN);
+ }
+
+ /* Add quality statistics */
+ iwe.cmd = IWEVQUAL;
+ iwe.u.qual.updated = 0x10; /* no link quality */
+ iwe.u.qual.level = (__u8) le16_to_cpu(atom->a.level) - 0x95;
+ iwe.u.qual.noise = (__u8) le16_to_cpu(atom->a.noise) - 0x95;
+ /* Wireless tools prior to 27.pre22 will show link quality
+ * anyway, so we provide a reasonable value. */
+ if (iwe.u.qual.level > iwe.u.qual.noise)
+ iwe.u.qual.qual = iwe.u.qual.level - iwe.u.qual.noise;
+ else
+ iwe.u.qual.qual = 0;
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
+
+ /* Add encryption capability */
+ iwe.cmd = SIOCGIWENCODE;
+ if (capabilities & 0x10)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, atom->a.essid);
+
+ /* Bit rate is not available in Lucent/Agere firmwares */
+ if (priv->firmware_type != FIRMWARE_TYPE_AGERE) {
+ char * current_val = current_ev + IW_EV_LCP_LEN;
+ int i;
+ int step;
+
+ if (priv->firmware_type == FIRMWARE_TYPE_SYMBOL)
+ step = 2;
+ else
+ step = 1;
+
+ iwe.cmd = SIOCGIWRATE;
+ /* Those two flags are ignored... */
+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+ /* Max 10 values */
+ for (i = 0; i < 10; i += step) {
+ /* NULL terminated */
+ if (atom->p.rates[i] == 0x0)
+ break;
+ /* Bit rate given in 500 kb/s units (+ 0x80) */
+ iwe.u.bitrate.value = ((atom->p.rates[i] & 0x7f) * 500000);
+ current_val = iwe_stream_add_value(current_ev, current_val,
+ end_buf, &iwe,
+ IW_EV_PARAM_LEN);
+ }
+ /* Check if we added any event */
+ if ((current_val - current_ev) > IW_EV_LCP_LEN)
+ current_ev = current_val;
+ }
+
+ /* The other data in the scan result are not really
+ * interesting, so for now drop it - Jean II */
+ }
+ return current_ev - buffer;
+}
+
+/* Return results of a scan */
+static int orinoco_ioctl_getscan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *srq,
+ char *extra)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* If no results yet, ask to try again later */
+ if (priv->scan_result == NULL) {
+ if (priv->scan_inprogress)
+ /* Important note : we don't want to block the caller
+ * until results are ready for various reasons.
+ * First, managing wait queues is complex and racy.
+ * Second, we grab some rtnetlink lock before comming
+ * here (in dev_ioctl()).
+ * Third, we generate an Wireless Event, so the
+ * caller can wait itself on that - Jean II */
+ err = -EAGAIN;
+ else
+ /* Client error, no scan results...
+ * The caller need to restart the scan. */
+ err = -ENODATA;
+ } else {
+ /* We have some results to push back to user space */
+
+ /* Translate to WE format */
+ srq->length = orinoco_translate_scan(dev, extra,
+ priv->scan_result,
+ priv->scan_len);
+
+ /* Return flags */
+ srq->flags = (__u16) priv->scan_mode;
+
+ /* Results are here, so scan no longer in progress */
+ priv->scan_inprogress = 0;
+
+ /* In any case, Scan results will be cleaned up in the
+ * reset function and when exiting the driver.
+ * The person triggering the scanning may never come to
+ * pick the results, so we need to do it in those places.
+ * Jean II */
+
+#ifdef SCAN_SINGLE_READ
+ /* If you enable this option, only one client (the first
+ * one) will be able to read the result (and only one
+ * time). If there is multiple concurent clients that
+ * want to read scan results, this behavior is not
+ * advisable - Jean II */
+ kfree(priv->scan_result);
+ priv->scan_result = NULL;
+#endif /* SCAN_SINGLE_READ */
+ /* Here, if too much time has elapsed since last scan,
+ * we may want to clean up scan results... - Jean II */
+ }
+
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
/* Commit handler, called after set operations */
static int orinoco_ioctl_commit(struct net_device *dev,
struct iw_request_info *info,
@@ -4060,6 +4559,8 @@
[SIOCGIWSPY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getspy,
[SIOCSIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setwap,
[SIOCGIWAP -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getwap,
+ [SIOCSIWSCAN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setscan,
+ [SIOCGIWSCAN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getscan,
[SIOCSIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setessid,
[SIOCGIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getessid,
[SIOCSIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setnick,
Index: linux-2.6/drivers/net/wireless/orinoco.h
===================================================================
--- linux-2.6.orig/drivers/net/wireless/orinoco.h 2005-06-19 01:03:47.000000000 +0200
+++ linux-2.6/drivers/net/wireless/orinoco.h 2005-06-19 01:03:51.000000000 +0200
@@ -32,6 +32,20 @@
char data[ORINOCO_MAX_KEY_SIZE];
} __attribute__ ((packed));
+struct header_struct {
+ /* 802.3 */
+ u8 dest[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ u16 len;
+ /* 802.2 */
+ u8 dsap;
+ u8 ssap;
+ u8 ctrl;
+ /* SNAP */
+ u8 oui[3];
+ u16 ethertype;
+} __attribute__ ((packed));
+
typedef enum {
FIRMWARE_TYPE_AGERE,
FIRMWARE_TYPE_INTERSIL,
@@ -51,6 +65,7 @@
int open;
u16 last_linkstatus;
struct work_struct join_work;
+ struct work_struct wevent_work;
/* Net device stuff */
struct net_device *ndev;
@@ -77,6 +92,7 @@
unsigned int has_pm:1;
unsigned int has_preamble:1;
unsigned int has_sensitivity:1;
+ unsigned int has_hostscan:1;
unsigned int broken_disableport:1;
/* Configuration paramaters */
@@ -103,6 +119,12 @@
/* Configuration dependent variables */
int port_type, createibss;
int promiscuous, mc_count;
+
+ /* Scanning support */
+ int scan_inprogress; /* Scan pending... */
+ u32 scan_mode; /* Type of scan done */
+ char * scan_result; /* Result of previous scan */
+ int scan_len; /* Lenght of result */
};
#ifdef ORINOCO_DEBUG
^ permalink raw reply
* [PATCH 7/9] orinoco: always use 802.11 header for rx processing
From: Christoph Hellwig @ 2005-06-18 23:28 UTC (permalink / raw)
To: jgarzik, proski, hermes; +Cc: netdev
If the frame has ToDS flag set, mark it by setting skb->pkt_type to
PACKET_OTHERHOST, so that applications unaware of promiscous mode won't get
uplink (STA->AP) packets for STA->STA transmissions relayed by the AP.
Thanks to John Denker and David Gibson for finding the problem and the
solution.
Patch from Pavel Roskin
Index: linux-2.6/drivers/net/wireless/orinoco.c
===================================================================
--- linux-2.6.orig/drivers/net/wireless/orinoco.c 2005-06-19 01:03:51.000000000 +0200
+++ linux-2.6/drivers/net/wireless/orinoco.c 2005-06-19 01:04:28.000000000 +0200
@@ -619,7 +619,9 @@
u16 ethertype;
} __attribute__ ((packed));
+/* Rx frame header except compatibility 802.3 header */
struct hermes_rx_descriptor {
+ /* Control */
u16 status;
u32 time;
u8 silence;
@@ -627,6 +629,18 @@
u8 rate;
u8 rxflow;
u32 reserved;
+
+ /* 802.11 header */
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+
+ /* Data length */
+ u16 data_len;
} __attribute__ ((packed));
/********************************************************************/
@@ -1110,12 +1124,10 @@
struct net_device_stats *stats = &priv->stats;
struct iw_statistics *wstats = &priv->wstats;
struct sk_buff *skb = NULL;
- u16 rxfid, status;
- int length, data_len, data_off;
- char *p;
+ u16 rxfid, status, fc;
+ int length;
struct hermes_rx_descriptor desc;
- struct header_struct hdr;
- struct ethhdr *eh;
+ struct ethhdr *hdr;
int err;
rxfid = hermes_read_regn(hw, RXFID);
@@ -1140,24 +1152,14 @@
stats->rx_crc_errors++;
DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name);
}
- stats->rx_errors++;
- goto drop;
- }
-
- /* For now we ignore the 802.11 header completely, assuming
- that the card's firmware has handled anything vital */
- err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr),
- rxfid, HERMES_802_3_OFFSET);
- if (err) {
- printk(KERN_ERR "%s: error %d reading frame header. "
- "Frame dropped.\n", dev->name, err);
stats->rx_errors++;
goto drop;
}
- length = ntohs(hdr.len);
-
+ length = le16_to_cpu(desc.data_len);
+ fc = le16_to_cpu(desc.frame_ctl);
+
/* Sanity checks */
if (length < 3) { /* No for even an 802.2 LLC header */
/* At least on Symbol firmware with PCF we get quite a
@@ -1186,57 +1188,51 @@
goto drop;
}
- skb_reserve(skb, 2); /* This way the IP header is aligned */
+ /* We'll prepend the header, so reserve space for it. The worst
+ case is no decapsulation, when 802.3 header is prepended and
+ nothing is removed. 2 is for aligning the IP header. */
+ skb_reserve(skb, ETH_HLEN + 2);
+
+ err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length),
+ ALIGN(length, 2), rxfid,
+ HERMES_802_2_OFFSET);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading frame. "
+ "Frame dropped.\n", dev->name, err);
+ stats->rx_errors++;
+ goto drop;
+ }
/* Handle decapsulation
* In most cases, the firmware tell us about SNAP frames.
* For some reason, the SNAP frames sent by LinkSys APs
* are not properly recognised by most firmwares.
* So, check ourselves */
- if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
- ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
- is_ethersnap(&hdr)) {
+ if (length >= ENCAPS_OVERHEAD &&
+ (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
+ ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
+ is_ethersnap(skb->data))) {
/* These indicate a SNAP within 802.2 LLC within
802.11 frame which we'll need to de-encapsulate to
the original EthernetII frame. */
-
- if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */
- stats->rx_length_errors++;
- goto drop;
- }
-
- /* Remove SNAP header, reconstruct EthernetII frame */
- data_len = length - ENCAPS_OVERHEAD;
- data_off = HERMES_802_3_OFFSET + sizeof(hdr);
-
- eh = (struct ethhdr *)skb_put(skb, ETH_HLEN);
-
- memcpy(eh, &hdr, 2 * ETH_ALEN);
- eh->h_proto = hdr.ethertype;
+ hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN - ENCAPS_OVERHEAD);
} else {
- /* All other cases indicate a genuine 802.3 frame. No
- decapsulation needed. We just throw the whole
- thing in, and hope the protocol layer can deal with
- it as 802.3 */
- data_len = length;
- data_off = HERMES_802_3_OFFSET;
- /* FIXME: we re-read from the card data we already read here */
- }
-
- p = skb_put(skb, data_len);
- err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2),
- rxfid, data_off);
- if (err) {
- printk(KERN_ERR "%s: error %d reading frame. "
- "Frame dropped.\n", dev->name, err);
- stats->rx_errors++;
- goto drop;
- }
+ /* 802.3 frame - prepend 802.3 header as is */
+ hdr = (struct ethhdr *)skb_push(skb, ETH_HLEN);
+ hdr->h_proto = htons(length);
+ }
+ memcpy(hdr->h_dest, desc.addr1, ETH_ALEN);
+ if (fc & IEEE80211_FCTL_FROMDS)
+ memcpy(hdr->h_source, desc.addr3, ETH_ALEN);
+ else
+ memcpy(hdr->h_source, desc.addr2, ETH_ALEN);
dev->last_rx = jiffies;
skb->dev = dev;
skb->protocol = eth_type_trans(skb, dev);
skb->ip_summed = CHECKSUM_NONE;
+ if (fc & IEEE80211_FCTL_TODS)
+ skb->pkt_type = PACKET_OTHERHOST;
/* Process the wireless stats if needed */
orinoco_stat_gather(dev, skb, &desc);
@@ -1457,6 +1453,9 @@
u16 newstatus;
int connected;
+ if (priv->iw_mode == IW_MODE_MONITOR)
+ break;
+
if (len != sizeof(linkstatus)) {
printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
dev->name, len);
^ permalink raw reply
* [PATCH 8/9] orinoco: monitor mode support
From: Christoph Hellwig @ 2005-06-18 23:28 UTC (permalink / raw)
To: jgarzik, proski, hermes; +Cc: netdev
Patch from Pavel Roskin
Index: linux-2.6/drivers/net/wireless/orinoco.c
===================================================================
--- linux-2.6.orig/drivers/net/wireless/orinoco.c 2005-06-19 01:04:28.000000000 +0200
+++ linux-2.6/drivers/net/wireless/orinoco.c 2005-06-19 01:14:43.000000000 +0200
@@ -499,6 +499,10 @@
module_param(ignore_disconnect, int, 0644);
MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer");
+static int force_monitor; /* = 0 */
+module_param(force_monitor, int, 0644);
+MODULE_PARM_DESC(force_monitor, "Allow monitor mode for all firmware versions");
+
/********************************************************************/
/* Compile time configuration and compatibility stuff */
/********************************************************************/
@@ -670,6 +674,10 @@
priv->createibss = 1;
}
break;
+ case IW_MODE_MONITOR:
+ priv->port_type = 3;
+ priv->createibss = 0;
+ break;
default:
printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
priv->ndev->name);
@@ -856,7 +864,7 @@
return 1;
}
- if (! netif_carrier_ok(dev)) {
+ if (! netif_carrier_ok(dev) || (priv->iw_mode == IW_MODE_MONITOR)) {
/* Oops, the firmware hasn't established a connection,
silently drop the packet (this seems to be the
safest approach). */
@@ -1118,6 +1126,117 @@
}
}
+/*
+ * orinoco_rx_monitor - handle received monitor frames.
+ *
+ * Arguments:
+ * dev network device
+ * rxfid received FID
+ * desc rx descriptor of the frame
+ *
+ * Call context: interrupt
+ */
+static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
+ struct hermes_rx_descriptor *desc)
+{
+ u32 hdrlen = 30; /* return full header by default */
+ u32 datalen = 0;
+ u16 fc;
+ int err;
+ int len;
+ struct sk_buff *skb;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ hermes_t *hw = &priv->hw;
+
+ len = le16_to_cpu(desc->data_len);
+
+ /* Determine the size of the header and the data */
+ fc = le16_to_cpu(desc->frame_ctl);
+ switch (fc & IEEE80211_FCTL_FTYPE) {
+ case IEEE80211_FTYPE_DATA:
+ if ((fc & IEEE80211_FCTL_TODS)
+ && (fc & IEEE80211_FCTL_FROMDS))
+ hdrlen = 30;
+ else
+ hdrlen = 24;
+ datalen = len;
+ break;
+ case IEEE80211_FTYPE_MGMT:
+ hdrlen = 24;
+ datalen = len;
+ break;
+ case IEEE80211_FTYPE_CTL:
+ switch (fc & IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_PSPOLL:
+ case IEEE80211_STYPE_RTS:
+ case IEEE80211_STYPE_CFEND:
+ case IEEE80211_STYPE_CFENDACK:
+ hdrlen = 16;
+ break;
+ case IEEE80211_STYPE_CTS:
+ case IEEE80211_STYPE_ACK:
+ hdrlen = 10;
+ break;
+ }
+ break;
+ default:
+ /* Unknown frame type */
+ break;
+ }
+
+ /* sanity check the length */
+ if (datalen > IEEE80211_DATA_LEN + 12) {
+ printk(KERN_DEBUG "%s: oversized monitor frame, "
+ "data length = %d\n", dev->name, datalen);
+ err = -EIO;
+ stats->rx_length_errors++;
+ goto update_stats;
+ }
+
+ skb = dev_alloc_skb(hdrlen + datalen);
+ if (!skb) {
+ printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
+ dev->name);
+ err = -ENOMEM;
+ goto drop;
+ }
+
+ /* Copy the 802.11 header to the skb */
+ memcpy(skb_put(skb, hdrlen), &(desc->frame_ctl), hdrlen);
+ skb->mac.raw = skb->data;
+
+ /* If any, copy the data from the card to the skb */
+ if (datalen > 0) {
+ err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen),
+ ALIGN(datalen, 2), rxfid,
+ HERMES_802_2_OFFSET);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading monitor frame\n",
+ dev->name, err);
+ goto drop;
+ }
+ }
+
+ skb->dev = dev;
+ skb->ip_summed = CHECKSUM_NONE;
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->protocol = __constant_htons(ETH_P_802_2);
+
+ dev->last_rx = jiffies;
+ stats->rx_packets++;
+ stats->rx_bytes += skb->len;
+
+ netif_rx(skb);
+ return;
+
+ drop:
+ dev_kfree_skb_irq(skb);
+ update_stats:
+ stats->rx_errors++;
+ stats->rx_dropped++;
+}
+
static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
{
struct orinoco_private *priv = netdev_priv(dev);
@@ -1137,24 +1256,29 @@
if (err) {
printk(KERN_ERR "%s: error %d reading Rx descriptor. "
"Frame dropped.\n", dev->name, err);
- stats->rx_errors++;
- goto drop;
+ goto update_stats;
}
status = le16_to_cpu(desc.status);
- if (status & HERMES_RXSTAT_ERR) {
- if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
- wstats->discard.code++;
- DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
- dev->name);
- } else {
- stats->rx_crc_errors++;
- DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name);
- }
+ if (status & HERMES_RXSTAT_BADCRC) {
+ DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n",
+ dev->name);
+ stats->rx_crc_errors++;
+ goto update_stats;
+ }
- stats->rx_errors++;
- goto drop;
+ /* Handle frames in monitor mode */
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ orinoco_rx_monitor(dev, rxfid, &desc);
+ return;
+ }
+
+ if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
+ DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
+ dev->name);
+ wstats->discard.code++;
+ goto update_stats;
}
length = le16_to_cpu(desc.data_len);
@@ -1165,15 +1289,13 @@
/* At least on Symbol firmware with PCF we get quite a
lot of these legitimately - Poll frames with no
data. */
- stats->rx_dropped++;
- goto drop;
+ return;
}
if (length > IEEE802_11_DATA_LEN) {
printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
dev->name, length);
stats->rx_length_errors++;
- stats->rx_errors++;
- goto drop;
+ goto update_stats;
}
/* We need space for the packet data itself, plus an ethernet
@@ -1185,7 +1307,7 @@
if (!skb) {
printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
dev->name);
- goto drop;
+ goto update_stats;
}
/* We'll prepend the header, so reserve space for it. The worst
@@ -1199,7 +1321,6 @@
if (err) {
printk(KERN_ERR "%s: error %d reading frame. "
"Frame dropped.\n", dev->name, err);
- stats->rx_errors++;
goto drop;
}
@@ -1245,11 +1366,10 @@
return;
drop:
+ dev_kfree_skb_irq(skb);
+ update_stats:
+ stats->rx_errors++;
stats->rx_dropped++;
-
- if (skb)
- dev_kfree_skb_irq(skb);
- return;
}
/********************************************************************/
@@ -2065,6 +2185,20 @@
}
}
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ /* Enable monitor mode */
+ dev->type = ARPHRD_IEEE80211;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_MONITOR, 0, NULL);
+ } else {
+ /* Disable monitor mode */
+ dev->type = ARPHRD_ETHER;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_STOP, 0, NULL);
+ }
+ if (err)
+ return err;
+
/* Set promiscuity / multicast*/
priv->promiscuous = 0;
priv->mc_count = 0;
@@ -2413,6 +2547,7 @@
priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
priv->ibss_port = 1;
priv->has_hostscan = (firmver >= 0x8000a);
+ priv->broken_monitor = (firmver >= 0x80000);
/* Tested with Agere firmware :
* 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
@@ -2980,6 +3115,15 @@
case IW_MODE_INFRA:
break;
+ case IW_MODE_MONITOR:
+ if (priv->broken_monitor && !force_monitor) {
+ printk(KERN_WARNING "%s: Monitor mode support is "
+ "buggy in this firmware, not enabling\n",
+ dev->name);
+ err = -EOPNOTSUPP;
+ }
+ break;
+
default:
err = -EOPNOTSUPP;
break;
@@ -3355,11 +3499,9 @@
unsigned long flags;
int err = -EINPROGRESS; /* Call commit handler */
- /* We can only use this in Ad-Hoc demo mode to set the operating
- * frequency, or in IBSS mode to set the frequency where the IBSS
- * will be created - Jean II */
- if (priv->iw_mode != IW_MODE_ADHOC)
- return -EOPNOTSUPP;
+ /* In infrastructure mode the AP sets the channel */
+ if (priv->iw_mode == IW_MODE_INFRA)
+ return -EBUSY;
if ( (frq->e == 0) && (frq->m <= 1000) ) {
/* Setting by channel number */
@@ -3383,7 +3525,15 @@
if (orinoco_lock(priv, &flags) != 0)
return -EBUSY;
+
priv->channel = chan;
+ if (priv->iw_mode == IW_MODE_MONITOR) {
+ /* Fast channel change - no commit if successful */
+ hermes_t *hw = &priv->hw;
+ err = hermes_docmd_wait(hw, HERMES_CMD_TEST |
+ HERMES_TEST_SET_CHANNEL,
+ chan, NULL);
+ }
orinoco_unlock(priv, &flags);
return err;
Index: linux-2.6/drivers/net/wireless/orinoco.h
===================================================================
--- linux-2.6.orig/drivers/net/wireless/orinoco.h 2005-06-19 01:03:51.000000000 +0200
+++ linux-2.6/drivers/net/wireless/orinoco.h 2005-06-19 01:04:43.000000000 +0200
@@ -94,6 +94,7 @@
unsigned int has_sensitivity:1;
unsigned int has_hostscan:1;
unsigned int broken_disableport:1;
+ unsigned int broken_monitor:1;
/* Configuration paramaters */
u32 iw_mode;
^ permalink raw reply
* [PATCH 9/9] orinoco: update changelog and version
From: Christoph Hellwig @ 2005-06-18 23:28 UTC (permalink / raw)
To: jgarzik, proski, hermes; +Cc: netdev
diff -urp -X /home/hch/dontdiff linux-2.6/drivers/net/wireless/orinoco.c orinoco/orinoco.c
--- linux-2.6/drivers/net/wireless/orinoco.c 2005-05-14 13:49:02.000000000 +0200
+++ orinoco/orinoco.c 2005-05-14 13:05:46.000000000 +0200
@@ -416,12 +416,50 @@
* port. This is supposed to allow 802.1x to work sanely, but
* doesn't seem to yet.
*
+ * v0.14alpha2 -> v0.15rc1 - 19 Apr 2004 - Pavel Roskin & David Gibson
+ * o Fix bug which prevented setting 32 character ESSIDs from
+ * iwconfig (Thomas Schulz).
+ * o Fix for incorrect CIS access in orinoco_plx (Pavel Roskin).
+ * o Fix setting WEP key if __orinoco_fastkeychange() is not
+ * supported (Pavel Roskin).
+ * o New wireless extensions API and scanning support (patch from
+ * Moustafa Youssef, updated by Jim Carter and Pavel Roskin).
+ * o Add minimal ethtool support (Pavel Roskin).
+ * o Replace CardServices() calls for compatibility with Linux
+ * 2.6.2 and above (Pavel Roskin).
+ * o Fix recognition of Intersil x.x.1 firmware (Pavel Roskin).
+ * o Replace dump_recs with more flexible get_rid ioctl (Pavel
+ * Roskin).
+ * o RF monitor mode support (Pavel Roskin).
+ * o Lots of bugfixes.
+ *
+ * v0.15rc1 -> v0.15rc2 - 28 Jul 2004 - Pavel Roskin & David Gibson
+ * o orinoco_pci saves PCI registers on suspend (Simon Huggins).
+ * o Monitor mode disabled on Agere 8.xx firmware - it's broken.
+ * o BAP timeout increased - needed for Intersil firmware.
+ * o Tx power is no longer reported - it's unreliable.
+ * o Use 802.11 header in rx path. Hide packets with ToDS flag
+ * from programs that don't need promiscous mode (John Denker).
+ * o Manual roaming implemented for Symbol and Intersil firmware.
+ * o Use netdev_priv() instead of directly dereferencing dev->priv.
+ * o Some simplification of pcmcia init code in orinoco_cs and
+ * spectrum_cs.
+ * o Numerous trivial cleanups, mainly arising from long-overdue
+ * merge with mainline.
+ *
+ * v0.15rc2 -> ???? - ???? - David Gibson
+ * o Use ssleep() or msleep() instead of hardcoded
+ * schedule_timeout()s (Nishanth Aravamudan via kernel-janitors
+ * list).
+ * o Several cleanups and bugfixes in pci/plx/tmd/nortel drivers.
+ * o Fix memory leak in orinoco_join_ap().
+ * o Change io handling to avoid sparse and gcc warnings.
+ * o Use C99 array initializers and ARRAY_SIZE() for iw_handler
+ * tables.
+ *
* TODO
- * o New wireless extensions API (patch from Moustafa
- * Youssef, updated by Jim Carter and Pavel Roskin).
* o Handle de-encapsulation within network layer, provide 802.11
* headers (patch from Thomas 'Dent' Mirlacher)
- * o RF monitor mode support
* o Fix possible races in SPY handling.
* o Disconnect wireless extensions from fundamental configuration.
* o (maybe) Software WEP support (patch from Stano Meduna).
diff -urp -X /home/hch/dontdiff linux-2.6/drivers/net/wireless/orinoco.h orinoco/orinoco.h
--- linux-2.6/drivers/net/wireless/orinoco.h 2005-05-14 13:48:44.000000000 +0200
+++ orinoco/orinoco.h 2005-03-18 16:03:24.000000000 +0100
@@ -7,7 +7,7 @@
#ifndef _ORINOCO_H
#define _ORINOCO_H
-#define DRIVER_VERSION "0.14alpha2"
+#define DRIVER_VERSION "0.15rc2"
#include <linux/types.h>
#include <linux/spinlock.h>
^ permalink raw reply
* 及川奈央特集！！
From: ☆ダイナマイト☆ @ 2005-06-19 13:43 UTC (permalink / raw)
To: netdev
あのテレビ番組に猛烈な勢いで
出演し始めている及川奈央！
もちろん彼女はれっきとした
「裏」ＡＶ出身です！
いずれ飯島愛をも追い越すであろう
及川奈央のタイトルを期間限定で大放出！！
今すぐ動画を見る！
http://bigkame.com/?11820190458024436
^ permalink raw reply
* Re: netpoll and the bonding driver
From: Matt Mackall @ 2005-06-19 18:14 UTC (permalink / raw)
To: Jeff Moyer; +Cc: netdev, linux-kernel
In-Reply-To: <17075.10995.498758.773092@segfault.boston.redhat.com>
On Fri, Jun 17, 2005 at 03:56:35PM -0400, Jeff Moyer wrote:
> Hi,
>
> I'm trying to implement a netpoll hook for the bonding driver.
My first question would be: does this really make sense to do? Why not
just bind netpoll to one of the underlying devices?
--
Mathematics is the supreme nostalgia of our time.
^ permalink raw reply
* [PATCH] ax25: endian-annotate ax25_type_trans()
From: Alexey Dobriyan @ 2005-06-19 20:26 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-hams, netdev, Al Viro
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Index: linux-sparse/include/net/ax25.h
===================================================================
--- linux-sparse.orig/include/net/ax25.h 2005-06-10 09:24:10.000000000 +0400
+++ linux-sparse/include/net/ax25.h 2005-06-10 15:03:30.000000000 +0400
@@ -220,7 +220,7 @@ static __inline__ void ax25_cb_put(ax25_
}
}
-static inline unsigned short ax25_type_trans(struct sk_buff *skb, struct net_device *dev)
+static inline __be16 ax25_type_trans(struct sk_buff *skb, struct net_device *dev)
{
skb->dev = dev;
skb->pkt_type = PACKET_HOST;
^ permalink raw reply
* Re: netpoll and the bonding driver
From: John W. Linville @ 2005-06-20 0:21 UTC (permalink / raw)
To: Matt Mackall; +Cc: Jeff Moyer, netdev, linux-kernel
In-Reply-To: <20050619181436.GX27572@waste.org>
On Sun, Jun 19, 2005 at 11:14:36AM -0700, Matt Mackall wrote:
> On Fri, Jun 17, 2005 at 03:56:35PM -0400, Jeff Moyer wrote:
> > I'm trying to implement a netpoll hook for the bonding driver.
>
> My first question would be: does this really make sense to do? Why not
> just bind netpoll to one of the underlying devices?
Depending on the bonding mode, this would be very unlikely to work.
The other side of the link will still be expecting to talk to the
bond rather than to an individual link.
John
--
John W. Linville
linville@tuxdriver.com
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox