* Re: netfilter 02/02: xt_connlimit: fix regression caused by zero family value
From: Patrick McHardy @ 2009-11-06 14:49 UTC (permalink / raw)
To: Jan Engelhardt
Cc: David S. Miller, Netfilter Development Mailinglist,
Linux Netdev List
In-Reply-To: <alpine.LSU.2.00.0911051943130.25147@obet.zrqbmnf.qr>
Jan Engelhardt wrote:
> On Thursday 2009-11-05 19:23, Patrick McHardy wrote:
>> netfilter: xt_connlimit: fix regression caused by zero family value
>>
>> Commit v2.6.28-rc1~7172~1092~2 was slightly incomplete; not all
>> instances of par->match->family were changed to par->family.
>>
>> Netfilter bugzilla #610.
>
> Hold it.
> git would never output ~7172~1092~2 because ~8266 would be much simpler.
>
> I originally wrote "Commit v2.6.28-rc1~717^2~109^2~2", but one of your
> programs seems to eat commit messages or more.
Indeed, my email client displays ^2 as ², which cut and paste transforms
to 2 :)
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 1/2] udp: cleanup __udp4_lib_mcast_deliver
From: Eric Dumazet @ 2009-11-06 15:10 UTC (permalink / raw)
To: Lucian Adrian Grijincu; +Cc: David Miller, netdev, opurdila
In-Reply-To: <200911061604.21465.lgrijincu@ixiacom.com>
Lucian Adrian Grijincu a écrit :
>
> As far as I understand it, the spin locks protect the hslot, and freeing the
> skb does not walk/change or interact with the hslot in any way.
>
Yes, but this single skb freeing is in multicast very slow path
(it happens if we receive a multicast packet with no listener, which should
not happen with multicast aware network...)
If you really want to optimize this part, we could use an array of
32 (or 64) socket pointers, to be able to perform the really expensive
work (skb_clone(), udp_queue_rcv_skb()) outside of the lock.
Something like this untested patch :
net/ipv4/udp.c | 68 ++++++++++++++++++++++++++++++-----------------
1 files changed, 44 insertions(+), 24 deletions(-)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index d5e75e9..5d71aee 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1190,6 +1190,24 @@ drop:
return -1;
}
+
+static void flush_stack(struct sock **stack, unsigned int count,
+ struct sk_buff *skb, unsigned int final)
+{
+ unsigned int i;
+ struct sk_buff *skb1 = NULL;
+
+ for (i = 0; i < count; i++) {
+ if (likely(skb1 == NULL))
+ skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
+
+ if (likely(skb1 && udp_queue_rcv_skb(stack[i], skb1) <= 0))
+ skb1 = NULL;
+ }
+ if (unlikely(skb1))
+ consume_skb(skb1);
+}
+
/*
* Multicasts and broadcasts go to each listener.
*
@@ -1201,38 +1219,40 @@ static int __udp4_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
__be32 saddr, __be32 daddr,
struct udp_table *udptable)
{
- struct sock *sk;
+ struct sock *sk, *stack[256 / sizeof(void *)];
struct udp_hslot *hslot = udp_hashslot(udptable, net, ntohs(uh->dest));
int dif;
+ unsigned int i, count = 0;
spin_lock(&hslot->lock);
sk = sk_nulls_head(&hslot->head);
dif = skb->dev->ifindex;
sk = udp_v4_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif);
- if (sk) {
- struct sock *sknext = NULL;
-
- do {
- struct sk_buff *skb1 = skb;
-
- sknext = udp_v4_mcast_next(net, sk_nulls_next(sk), uh->dest,
- daddr, uh->source, saddr,
- dif);
- if (sknext)
- skb1 = skb_clone(skb, GFP_ATOMIC);
-
- if (skb1) {
- int ret = udp_queue_rcv_skb(sk, skb1);
- if (ret > 0)
- /* we should probably re-process instead
- * of dropping packets here. */
- kfree_skb(skb1);
- }
- sk = sknext;
- } while (sknext);
- } else
- consume_skb(skb);
+ while (sk) {
+ stack[count++] = sk;
+ if (unlikely(count == ARRAY_SIZE(stack))) {
+ flush_stack(stack, count, skb, ~0);
+ count = 0;
+ }
+
+ sk = udp_v4_mcast_next(net, sk_nulls_next(sk), uh->dest,
+ daddr, uh->source, saddr, dif);
+ }
+ /*
+ * before releasing the lock, we must take reference on sockets
+ */
+ for (i = 0; i < count; i++)
+ sock_hold(stack[i]);
+
spin_unlock(&hslot->lock);
+
+ /*
+ * do the slow work with no lock held
+ */
+ flush_stack(stack, count, skb, count - 1);
+
+ for (i = 0; i < count; i++)
+ sock_put(stack[i]);
return 0;
}
^ permalink raw reply related
* Re: netfilter 02/02: xt_connlimit: fix regression caused by zero family value
From: Eric Dumazet @ 2009-11-06 15:14 UTC (permalink / raw)
To: Patrick McHardy
Cc: Jan Engelhardt, David S. Miller,
Netfilter Development Mailinglist, Linux Netdev List
In-Reply-To: <4AF43782.50604@trash.net>
Patrick McHardy a écrit :
> Indeed, my email client displays ^2 as ², which cut and paste transforms
> to 2 :)
>
One more Thunderbird addict^Wvictim :)
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [RFC] netlink: add socket destruction notification
From: Patrick McHardy @ 2009-11-06 15:21 UTC (permalink / raw)
To: Johannes Berg; +Cc: netdev, Jouni Malinen, Thomas Graf
In-Reply-To: <1254473048.3959.76.camel@johannes.local>
Johannes Berg wrote:
> When we want to keep track of resources associated with applications, we
> need to know when an app is going away. Add a notification function to
> netlink that tells us that, and also hook it up to generic netlink so
> generic netlink can notify the families. Due to the way generic netlink
> works though, we need to notify all families and they have to sort out
> whatever resources some commands associated with the socket themselves.
>
> @@ -166,6 +167,9 @@ static void netlink_sock_destruct(struct
> return;
> }
>
> + if (nlk->destruct)
> + nlk->destruct(sk);
> +
> WARN_ON(atomic_read(&sk->sk_rmem_alloc));
> WARN_ON(atomic_read(&sk->sk_wmem_alloc));
> WARN_ON(nlk_sk(sk)->groups);
This seems pretty similar to the NETLINK_URELEASE notifier invoked
in netlink_release(). Wouldn't that one work as well?
^ permalink raw reply
* Re: wanPMC-CxT1E1
From: Bob Beers @ 2009-11-06 15:25 UTC (permalink / raw)
To: Greg KH; +Cc: netdev, Krzysztof Halasa
In-Reply-To: <4f6ba3b0911021339v20d7692fm52bcd5208002d6e4@mail.gmail.com>
Hi Greg,
I don't mean to seem impatient, but is cxt1e1 in staging yet?
When it is, do I 'git pull' or re-baseline, or what? I don't mean
to cause you too much extra work, but once I get the hang of
this, I should be giving more than I'm taking.
I started over with a git clone of 2.6.31.y (vs 2.6.32.rcX) and
could submit a new patch that does not have the two Makefile
errors. It compiles and I can modprobe the driver, but on
modprobe -r, or attempting to use the pmcc4cfg util, my
system locks up, maybe due to the incomplete port of the
2 INIT_WORK() calls.
I want to first fix the unload problem, then remove all the
kernel version checking stuff. After that, I thought would be
a good time to start fixing coding style issues, so that it will
not be too painful for others to look at.
BTW, where should the pmcc4cfg source code go? It needs a
change in the Makefile before it compiles correctly.
thanks,
--
-Bob Beers
^ permalink raw reply
* Re: [RFC] netlink: add socket destruction notification
From: Johannes Berg @ 2009-11-06 15:26 UTC (permalink / raw)
To: Patrick McHardy; +Cc: netdev, Jouni Malinen, Thomas Graf
In-Reply-To: <4AF43EF9.3020707@trash.net>
[-- Attachment #1: Type: text/plain, Size: 835 bytes --]
On Fri, 2009-11-06 at 16:21 +0100, Patrick McHardy wrote:
> Johannes Berg wrote:
> > When we want to keep track of resources associated with applications, we
> > need to know when an app is going away. Add a notification function to
> > netlink that tells us that, and also hook it up to generic netlink so
> > generic netlink can notify the families. Due to the way generic netlink
> > works though, we need to notify all families and they have to sort out
> > whatever resources some commands associated with the socket themselves.
> This seems pretty similar to the NETLINK_URELEASE notifier invoked
> in netlink_release(). Wouldn't that one work as well?
Hmm, it does seem similar, thanks for pointing it out. What exactly does
the condition
if (nlk->pid && !nlk->subscriptions) {
mean though?
johannes
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply
* Re: [RFC] netlink: add socket destruction notification
From: Patrick McHardy @ 2009-11-06 15:37 UTC (permalink / raw)
To: Johannes Berg; +Cc: netdev, Jouni Malinen, Thomas Graf
In-Reply-To: <1257521204.29454.31.camel@johannes.local>
Johannes Berg wrote:
> On Fri, 2009-11-06 at 16:21 +0100, Patrick McHardy wrote:
>> Johannes Berg wrote:
>>> When we want to keep track of resources associated with applications, we
>>> need to know when an app is going away. Add a notification function to
>>> netlink that tells us that, and also hook it up to generic netlink so
>>> generic netlink can notify the families. Due to the way generic netlink
>>> works though, we need to notify all families and they have to sort out
>>> whatever resources some commands associated with the socket themselves.
>
>
>> This seems pretty similar to the NETLINK_URELEASE notifier invoked
>> in netlink_release(). Wouldn't that one work as well?
>
> Hmm, it does seem similar, thanks for pointing it out. What exactly does
> the condition
> if (nlk->pid && !nlk->subscriptions) {
>
> mean though?
nlk->pid is non-zero for bound sockets, which is basically any
non-kernel socket which has either sent a message or explicitly
called bind(). nlk->subscriptions is zero for sockets not bound
to multicast groups.
So effectively it invokes the notifier for all bound unicast
userspace sockets. Not sure why it doesn't invoke the notifier
for sockets that are used for both unicast and multicast
reception. If that is a problem I think the second condition
could be removed.
^ permalink raw reply
* [PATCH net-next-2.6] udp: Optimise multicast reception
From: Eric Dumazet @ 2009-11-06 15:59 UTC (permalink / raw)
To: Lucian Adrian Grijincu, David Miller; +Cc: netdev, opurdila
In-Reply-To: <4AF43C5E.4060300@gmail.com>
Eric Dumazet a écrit :
> Yes, but this single skb freeing is in multicast very slow path
> (it happens if we receive a multicast packet with no listener, which should
> not happen with multicast aware network...)
>
>
> If you really want to optimize this part, we could use an array of
> 32 (or 64) socket pointers, to be able to perform the really expensive
> work (skb_clone(), udp_queue_rcv_skb()) outside of the lock.
>
> Something like this untested patch :
I did some tests and made one fix.
With this kind of stacking, we eventually could try a rcu lookup as well.
[PATCH net-next-2.6] udp: Optimise multicast reception
UDP multicast rx path is a bit complex and can hold a spinlock
for a long time.
Using a small (32 or 64 entries) stack of socket pointers can help
to perform expensive operations (skb_clone(), udp_queue_rcv_skb())
outside of the lock, in most cases.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
---
net/ipv4/udp.c | 70 ++++++++++++++++++++++++++++++-----------------
1 files changed, 46 insertions(+), 24 deletions(-)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index d5e75e9..89637d0 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1190,6 +1190,24 @@ drop:
return -1;
}
+
+static void flush_stack(struct sock **stack, unsigned int count,
+ struct sk_buff *skb, unsigned int final)
+{
+ unsigned int i;
+ struct sk_buff *skb1 = NULL;
+
+ for (i = 0; i < count; i++) {
+ if (likely(skb1 == NULL))
+ skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
+
+ if (skb1 && udp_queue_rcv_skb(stack[i], skb1) <= 0)
+ skb1 = NULL;
+ }
+ if (skb1)
+ consume_skb(skb1);
+}
+
/*
* Multicasts and broadcasts go to each listener.
*
@@ -1201,38 +1219,42 @@ static int __udp4_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
__be32 saddr, __be32 daddr,
struct udp_table *udptable)
{
- struct sock *sk;
+ struct sock *sk, *stack[256 / sizeof(struct sock *)];
struct udp_hslot *hslot = udp_hashslot(udptable, net, ntohs(uh->dest));
int dif;
+ unsigned int i, count = 0;
spin_lock(&hslot->lock);
sk = sk_nulls_head(&hslot->head);
dif = skb->dev->ifindex;
sk = udp_v4_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif);
- if (sk) {
- struct sock *sknext = NULL;
-
- do {
- struct sk_buff *skb1 = skb;
-
- sknext = udp_v4_mcast_next(net, sk_nulls_next(sk), uh->dest,
- daddr, uh->source, saddr,
- dif);
- if (sknext)
- skb1 = skb_clone(skb, GFP_ATOMIC);
-
- if (skb1) {
- int ret = udp_queue_rcv_skb(sk, skb1);
- if (ret > 0)
- /* we should probably re-process instead
- * of dropping packets here. */
- kfree_skb(skb1);
- }
- sk = sknext;
- } while (sknext);
- } else
- consume_skb(skb);
+ while (sk) {
+ stack[count++] = sk;
+ sk = udp_v4_mcast_next(net, sk_nulls_next(sk), uh->dest,
+ daddr, uh->source, saddr, dif);
+ if (unlikely(count == ARRAY_SIZE(stack))) {
+ if (!sk)
+ break;
+ flush_stack(stack, count, skb, ~0);
+ count = 0;
+ }
+
+ }
+ /*
+ * before releasing the lock, we must take reference on sockets
+ */
+ for (i = 0; i < count; i++)
+ sock_hold(stack[i]);
+
spin_unlock(&hslot->lock);
+
+ /*
+ * do the slow work with no lock held
+ */
+ flush_stack(stack, count, skb, count - 1);
+
+ for (i = 0; i < count; i++)
+ sock_put(stack[i]);
return 0;
}
^ permalink raw reply related
* Re: [RFC PATCH] net: add dataref destructor to sk_buff
From: Gregory Haskins @ 2009-11-06 16:08 UTC (permalink / raw)
To: David Miller; +Cc: netdev, linux-kernel, alacrityvm-devel@lists.sourceforge.net
In-Reply-To: <20091105.210810.124818005.davem@davemloft.net>
[-- Attachment #1: Type: text/plain, Size: 4583 bytes --]
David Miller wrote:
> From: Gregory Haskins <ghaskins@novell.com>
> Date: Fri, 02 Oct 2009 10:20:00 -0400
>
>> The following is an RFC for an attempt at addressing a zero-copy solution.
>>
>> To be perfectly honest, I have no idea if this is the best solution, or if
>> there is truly a problem with skb->destructor that requires an alternate
>> mechanism. What I do know is that this patch seems to work, and I would
>> like to see some kind of solution available upstream. So I thought I would
>> send my hack out as at least a point of discussion. FWIW: This has been
>> tested heavily in my rig and is technically suitable for inclusion after
>> review as is, if that is decided to be the optimal path forward here.
>>
>> Thanks for your review and consideration,
>
> I have no fundamental objections, but when you submit this for
> real can you show the code that uses it so we can get a better
> idea about things?
>
> Thanks.
Absolutely. I am not sure if this content would be appropriate for the
patch header, so I will just reply to your request here. If you would
like to see the patch resubmitted with the following in the header, let
me know.
The way we use this today is in the venet driver as part of the
AlacrityVM hypervisor. We therefore have a guest and host environment,
where the guest builds fully formed L2 frames, and the host generally
acts as a conduit for passing those frames to a real physical device
(such as through a soft-bridge, etc). We would like to do this without
requiring copies for certain classes of packets (i.e. packets larger
than a threshold). However we have to be smart about how we do this
since the guest technically "owns" the pages, and therefore needs
io-completion events to properly signify when pages are actually freed.
The way this all looks today is (I hope this doesn't get mangled):
----------------------------------------------------------------------
| guest | host |
----------------------------------------------------------------------
| stack | venet | venetdev | phydev |
----------------------------------------------------------------------
| alloc_skb() |
| dev_xmit() |
| -> queue_tx(sg) |
| -> dequeue_rx(sg) |
| alloc_pskb() |
| map_sg(sg)->pskb |
| loop(get_page()) |
| skb->release = cb |
| -> dev_xmit() |
| |
| txc_isr() <- |
| kfree_skb() |
| skb->release() |
| cb() <- |
| queue_event(sg) |
| txc_isr() <- |
| kfree_skb() |
| loop(put_page())|
----------------------------------------------------------------------
And here is the actual code in action
(kernel/vbus/devices/venet/device.c) from the alacrityvm.git tree
http://git.kernel.org/?p=linux/kernel/git/ghaskins/alacrityvm/linux-2.6.git;a=blob;f=kernel/vbus/devices/venet/device.c;h=d49ba7fa9f70cbb7e61c366d52d4c316d15f8b73;hb=HEAD
Line 587 is the "dequeue_rx()" operation from the diagram. Line 627 is
where we map in the guests pages to a scatterlist. Line 649 is where we
update the skb_shinfo->frags with the mapping. And finally, Line 677 is
where I register a callback for when the skb is released.
Line 853 is the callback that the stack invokes when the phydev finally
frees the packet. You can see that line 863 then sends an
transmit-complete event back up to the guest.
If this is not what you were looking for, please let me know. If this
looks acceptable to you, please consider the original patch for
inclusion at the next convenient merge window.
Thanks David!
-Greg
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 267 bytes --]
^ permalink raw reply
* Re: [PATCHv7 3/3] vhost_net: a kernel-level virtio server
From: Paul E. McKenney @ 2009-11-06 16:30 UTC (permalink / raw)
To: Rusty Russell
Cc: Michael S. Tsirkin, Gregory Haskins, Eric Dumazet, netdev,
virtualization, kvm, linux-kernel, mingo, linux-mm, akpm, hpa,
s.hetze
In-Reply-To: <200911061531.20299.rusty@rustcorp.com.au>
On Fri, Nov 06, 2009 at 03:31:20PM +1030, Rusty Russell wrote:
> On Thu, 5 Nov 2009 03:55:42 am Paul E. McKenney wrote:
> > On Wed, Nov 04, 2009 at 01:57:29PM +0200, Michael S. Tsirkin wrote:
> > > Can you ack this usage please?
> >
> > I thought I had done so in my paragraph above, but if you would like
> > something a bit more formal...
>
> <snip verbose super-ack with qualifications>
>
> That's great guys. And yes, this is a kind of read-copy-update. And no,
> there's nothing wrong with it.
>
> But it's still nasty to use half an API. If it were a few places I would
> have open-coded it with a comment, or wrapped it. As it is, I don't think
> that would be a win.
So would it help to have a rcu_read_lock_workqueue() and
rcu_read_unlock_workqueue() that checked nesting and whether they were
actually running in the context of a workqueue item? Or did you have
something else in mind? Or am I misjudging the level of sarcasm in
your reply? ;-)
Thanx, Paul
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply
* [PATCH net-next-2.6] ipv6: udp: Optimise multicast reception
From: Eric Dumazet @ 2009-11-06 16:30 UTC (permalink / raw)
To: David Miller; +Cc: Lucian Adrian Grijincu, netdev, opurdila
In-Reply-To: <4AF447F7.6000700@gmail.com>
And here is the ipv6 part as well
[PATCH net-next-2.6] ipv6: udp: Optimise multicast reception
^ permalink raw reply
* Re: Using netconsole and getting double prints
From: Luis R. Rodriguez @ 2009-11-06 16:32 UTC (permalink / raw)
To: Matt Mackall; +Cc: linux-kernel, netdev
In-Reply-To: <1257484663.2873.622.camel@calx>
On Thu, Nov 5, 2009 at 9:17 PM, Matt Mackall <mpm@selenic.com> wrote:
> On Thu, 2009-11-05 at 16:54 -0800, Luis R. Rodriguez wrote:
>> I'm getting double prints when using netconsole. This used to happen
>> to me and then I just enable debugging log level manually (dmesg -n 8)
>> but now no matter what I try I always get double prints.
>
> This is the first report I've seen of that. Recommend investigating with
> wireshark.
Matt, did you really mean wireshark? I'm a wireless guy so wireshark
to me is this:
http://www.wireshark.org/
The prints have nothing to do with protocols though. I can get a
double print on a simple hello world driver.
Luis
^ permalink raw reply
* Re: [PATCH net-next-2.6] udp: Optimise multicast reception
From: Lucian Adrian Grijincu @ 2009-11-06 16:35 UTC (permalink / raw)
To: Eric Dumazet; +Cc: David Miller, netdev, opurdila
In-Reply-To: <4AF447F7.6000700@gmail.com>
[-- Attachment #1: Type: Text/Plain, Size: 1298 bytes --]
În data de Vin 06 Noi 2009 17:59:51 ați scris:
> +static void flush_stack(struct sock **stack, unsigned int count,
> + struct sk_buff *skb, unsigned int final)
> +{
> + unsigned int i;
> + struct sk_buff *skb1 = NULL;
> +
> + for (i = 0; i < count; i++) {
> + if (likely(skb1 == NULL))
> + skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
> +
> + if (skb1 && udp_queue_rcv_skb(stack[i], skb1) <= 0)
> + skb1 = NULL;
> + }
> + if (skb1)
> + consume_skb(skb1);
> +}
consume_skb() assumes the skb was successfuly transmitted.
free_skb() does the same thing, but assumes that the frame is being dropped
after a failure and notes that.
In your code, if (count == 0) you:
* fail to remove the original skb (memory leak),
* simply consume the last dropped skb, without noting the droping failure.
I fixed these in the attached (untested) patch.
One last issue: you silently ignore dropped failures (skb1 is reused in case
of a failure).
If this tracing must record all failures, I'd add an
trace_kfree_skb(skb1, __builtin_return_address(0));
if udp_queue_rcv_skb() fails.
Other than this, nicely done!
--
Lucian
[-- Attachment #2: udp-optimise-multicast-reception.patch --]
[-- Type: text/plain, Size: 2359 bytes --]
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index d5e75e9..a2c1a27 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1190,6 +1190,29 @@ drop:
return -1;
}
+
+static void flush_stack(struct sock **stack, unsigned int count,
+ struct sk_buff *skb, unsigned int final)
+{
+ unsigned int i;
+ struct sk_buff *skb1 = NULL;
+
+ if ((count == 0) && skb) {
+ consume_skb(skb);
+ return;
+ }
+
+ for (i = 0; i < count; i++) {
+ if (likely(skb1 == NULL))
+ skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
+
+ if (skb1 && udp_queue_rcv_skb(stack[i], skb1) <= 0)
+ skb1 = NULL;
+ }
+ if (skb1)
+ free_skb(skb1);
+}
+
/*
* Multicasts and broadcasts go to each listener.
*
@@ -1201,38 +1224,42 @@ static int __udp4_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
__be32 saddr, __be32 daddr,
struct udp_table *udptable)
{
- struct sock *sk;
+ struct sock *sk, *stack[256 / sizeof(struct sock *)];
struct udp_hslot *hslot = udp_hashslot(udptable, net, ntohs(uh->dest));
int dif;
+ unsigned int i, count = 0;
spin_lock(&hslot->lock);
sk = sk_nulls_head(&hslot->head);
dif = skb->dev->ifindex;
sk = udp_v4_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif);
- if (sk) {
- struct sock *sknext = NULL;
-
- do {
- struct sk_buff *skb1 = skb;
-
- sknext = udp_v4_mcast_next(net, sk_nulls_next(sk), uh->dest,
- daddr, uh->source, saddr,
- dif);
- if (sknext)
- skb1 = skb_clone(skb, GFP_ATOMIC);
-
- if (skb1) {
- int ret = udp_queue_rcv_skb(sk, skb1);
- if (ret > 0)
- /* we should probably re-process instead
- * of dropping packets here. */
- kfree_skb(skb1);
- }
- sk = sknext;
- } while (sknext);
- } else
- consume_skb(skb);
+ while (sk) {
+ stack[count++] = sk;
+ sk = udp_v4_mcast_next(net, sk_nulls_next(sk), uh->dest,
+ daddr, uh->source, saddr, dif);
+ if (unlikely(count == ARRAY_SIZE(stack))) {
+ if (!sk)
+ break;
+ flush_stack(stack, count, skb, ~0);
+ count = 0;
+ }
+
+ }
+ /*
+ * before releasing the lock, we must take reference on sockets
+ */
+ for (i = 0; i < count; i++)
+ sock_hold(stack[i]);
+
spin_unlock(&hslot->lock);
+
+ /*
+ * do the slow work with no lock held
+ */
+ flush_stack(stack, count, skb, count - 1);
+
+ for (i = 0; i < count; i++)
+ sock_put(stack[i]);
return 0;
}
^ permalink raw reply related
* [PATCH net-next-2.6] ipv6: udp: Optimise multicast reception
From: Eric Dumazet @ 2009-11-06 16:35 UTC (permalink / raw)
To: David Miller; +Cc: Lucian Adrian Grijincu, netdev, opurdila
In-Reply-To: <4AF44F3D.3050407@gmail.com>
Sorry for previous empty mail :(
[PATCH net-next-2.6] ipv6: udp: Optimise multicast reception
IPV6 UDP multicast rx path is a bit complex and can hold a spinlock
for a long time.
Using a small (32 or 64 entries) stack of socket pointers can help
to perform expensive operations (skb_clone(), udp_queue_rcv_skb())
outside of the lock, in most cases.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
---
net/ipv6/udp.c | 67 ++++++++++++++++++++++++++++++-----------------
1 files changed, 43 insertions(+), 24 deletions(-)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 5bc7cdb..670662a 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -440,6 +440,27 @@ static struct sock *udp_v6_mcast_next(struct net *net, struct sock *sk,
return NULL;
}
+static void flush_stack(struct sock **stack, unsigned int count,
+ struct sk_buff *skb, unsigned int final)
+{
+ unsigned int i;
+ struct sock *sk;
+ struct sk_buff *skb1;
+
+ for (i = 0; i < count; i++) {
+ skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
+
+ if (skb1) {
+ sk = stack[i];
+ bh_lock_sock(sk);
+ if (!sock_owned_by_user(sk))
+ udpv6_queue_rcv_skb(sk, skb1);
+ else
+ sk_add_backlog(sk, skb1);
+ bh_unlock_sock(sk);
+ }
+ }
+}
/*
* Note: called only from the BH handler context,
* so we don't need to lock the hashes.
@@ -448,41 +469,39 @@ static int __udp6_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
struct in6_addr *saddr, struct in6_addr *daddr,
struct udp_table *udptable)
{
- struct sock *sk, *sk2;
+ struct sock *sk, *stack[256 / sizeof(struct sock *)];
const struct udphdr *uh = udp_hdr(skb);
struct udp_hslot *hslot = udp_hashslot(udptable, net, ntohs(uh->dest));
int dif;
+ unsigned int i, count = 0;
spin_lock(&hslot->lock);
sk = sk_nulls_head(&hslot->head);
dif = inet6_iif(skb);
sk = udp_v6_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif);
- if (!sk) {
- kfree_skb(skb);
- goto out;
- }
-
- sk2 = sk;
- while ((sk2 = udp_v6_mcast_next(net, sk_nulls_next(sk2), uh->dest, daddr,
- uh->source, saddr, dif))) {
- struct sk_buff *buff = skb_clone(skb, GFP_ATOMIC);
- if (buff) {
- bh_lock_sock(sk2);
- if (!sock_owned_by_user(sk2))
- udpv6_queue_rcv_skb(sk2, buff);
- else
- sk_add_backlog(sk2, buff);
- bh_unlock_sock(sk2);
+ while (sk) {
+ stack[count++] = sk;
+ sk = udp_v6_mcast_next(net, sk_nulls_next(sk), uh->dest, daddr,
+ uh->source, saddr, dif);
+ if (unlikely(count == ARRAY_SIZE(stack))) {
+ if (!sk)
+ break;
+ flush_stack(stack, count, skb, ~0);
+ count = 0;
}
}
- bh_lock_sock(sk);
- if (!sock_owned_by_user(sk))
- udpv6_queue_rcv_skb(sk, skb);
- else
- sk_add_backlog(sk, skb);
- bh_unlock_sock(sk);
-out:
+ /*
+ * before releasing the lock, we must take reference on sockets
+ */
+ for (i = 0; i < count; i++)
+ sock_hold(stack[i]);
+
spin_unlock(&hslot->lock);
+
+ flush_stack(stack, count, skb, count - 1);
+
+ for (i = 0; i < count; i++)
+ sock_put(stack[i]);
return 0;
}
^ permalink raw reply related
* Re: Using netconsole and getting double prints
From: Patrick McHardy @ 2009-11-06 16:38 UTC (permalink / raw)
To: Luis R. Rodriguez; +Cc: linux-kernel, netdev
In-Reply-To: <43e72e890911051654i19c18bf3nd397662ed79712c4@mail.gmail.com>
Luis R. Rodriguez wrote:
> I'm getting double prints when using netconsole. This used to happen
> to me and then I just enable debugging log level manually (dmesg -n 8)
> but now no matter what I try I always get double prints.
>
> For example:
>
> [ 23.425448] console [netcon0] enabled
> [ 23.425567] netconsole: network logging started
> [ 23.425448] console [netcon0] enabled
> [ 23.425567] netconsole: network logging started
> [ 32.856073] eth0: no IPv6 routers present
> [ 32.856073] eth0: no IPv6 routers present
> [ 66.307342] kmemleak: 6 new suspected memory leaks (see
> /sys/kernel/debug/kmemleak)
> [ 66.307342] kmemleak: 6 new suspected memory leaks (see
> /sys/kernel/debug/kmemleak)
>
> Instead of dmesg -8 I'm now using ignore_loglevel as a kernel
> parameter but I still get double prints. This also happens if I use
> "debug" as a kernel parameter instead.
>
> The netconsole is set up on the dev box as follows through an /etc/rc.local
>
> dhclient eth0
> IP=192.168.2
> # sudo dmesg -n 8
> modprobe netconsole netconsole=@/eth0,6666@${IP}/
Without a MAC address netconsole broadcasts the messages.
So I'd guess the receiving system has multiple NICs and
receives the message multiple times.
^ permalink raw reply
* Re: Using netconsole and getting double prints
From: Matt Mackall @ 2009-11-06 16:43 UTC (permalink / raw)
To: Luis R. Rodriguez; +Cc: linux-kernel, netdev
In-Reply-To: <43e72e890911060832k1b831f32w93357c71b370e71c@mail.gmail.com>
On Fri, 2009-11-06 at 08:32 -0800, Luis R. Rodriguez wrote:
> On Thu, Nov 5, 2009 at 9:17 PM, Matt Mackall <mpm@selenic.com> wrote:
> > On Thu, 2009-11-05 at 16:54 -0800, Luis R. Rodriguez wrote:
> >> I'm getting double prints when using netconsole. This used to happen
> >> to me and then I just enable debugging log level manually (dmesg -n 8)
> >> but now no matter what I try I always get double prints.
> >
> > This is the first report I've seen of that. Recommend investigating with
> > wireshark.
>
> Matt, did you really mean wireshark? I'm a wireless guy so wireshark
> to me is this:
>
> http://www.wireshark.org/
> The prints have nothing to do with protocols though. I can get a
> double print on a simple hello world driver.
Are you saying you get these double prints on the *local* machine? Are
the messages logged dmesg doubled too?
--
http://selenic.com : development and support for Mercurial and Linux
^ permalink raw reply
* Re: [PATCH net-next2.6] ipv6: avoid dev_hold()/dev_put() in rawv6_bind()
From: Brian Haley @ 2009-11-06 16:48 UTC (permalink / raw)
To: Eric Dumazet; +Cc: David S. Miller, Linux Netdev List
In-Reply-To: <4AF40022.6050100@gmail.com>
Eric Dumazet wrote:
> @@ -257,6 +257,7 @@ static int rawv6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
> if (sk->sk_state != TCP_CLOSE)
> goto out;
>
> + rcu_read_unlock();
> /* Check if the address belongs to the host. */
> if (addr_type != IPV6_ADDR_ANY) {
> struct net_device *dev = NULL;
This was supposed to be rcu_read_lock(), right?
-Brian
^ permalink raw reply
* Re: [PATCH net-next-2.6] udp: Optimise multicast reception
From: Eric Dumazet @ 2009-11-06 16:54 UTC (permalink / raw)
To: Lucian Adrian Grijincu; +Cc: David Miller, netdev, opurdila
In-Reply-To: <200911061835.24928.lgrijincu@ixiacom.com>
Lucian Adrian Grijincu a écrit :
> În data de Vin 06 Noi 2009 17:59:51 ați scris:
>> +static void flush_stack(struct sock **stack, unsigned int count,
>> + struct sk_buff *skb, unsigned int final)
>> +{
>> + unsigned int i;
>> + struct sk_buff *skb1 = NULL;
>> +
>> + for (i = 0; i < count; i++) {
>> + if (likely(skb1 == NULL))
>> + skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
>> +
>> + if (skb1 && udp_queue_rcv_skb(stack[i], skb1) <= 0)
>> + skb1 = NULL;
>> + }
>> + if (skb1)
>> + consume_skb(skb1);
>> +}
>
> consume_skb() assumes the skb was successfuly transmitted.
>
> free_skb() does the same thing, but assumes that the frame is being dropped
> after a failure and notes that.
>
> In your code, if (count == 0) you:
> * fail to remove the original skb (memory leak),
> * simply consume the last dropped skb, without noting the droping failure.
>
> I fixed these in the attached (untested) patch.
>
> One last issue: you silently ignore dropped failures (skb1 is reused in case
> of a failure).
>
> If this tracing must record all failures, I'd add an
> trace_kfree_skb(skb1, __builtin_return_address(0));
> if udp_queue_rcv_skb() fails.
>
> Other than this, nicely done!
>
Thanks !
Note, free_skb() doesnt exist ;)
And we should not call consume_skb() in this path.
I made the if (count == 0) done at the end of __udp4_lib_mcast_deliver()
[PATCH net-next-2.6] udp: Optimise multicast reception
UDP multicast rx path is a bit complex and can hold a spinlock
for a long time.
Using a small (32 or 64 entries) stack of socket pointers can help
to perform expensive operations (skb_clone(), udp_queue_rcv_skb())
outside of the lock, in most cases.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Lucian Adrian Grijincu <lgrijincu@ixiacom.com>
---
net/ipv4/udp.c | 76 ++++++++++++++++++++++++++++++-----------------
1 files changed, 50 insertions(+), 26 deletions(-)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index d5e75e9..45c73b1 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1190,49 +1190,73 @@ drop:
return -1;
}
+
+static void flush_stack(struct sock **stack, unsigned int count,
+ struct sk_buff *skb, unsigned int final)
+{
+ unsigned int i;
+ struct sk_buff *skb1 = NULL;
+
+ for (i = 0; i < count; i++) {
+ if (likely(skb1 == NULL))
+ skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
+
+ if (skb1 && udp_queue_rcv_skb(stack[i], skb1) <= 0)
+ skb1 = NULL;
+ }
+ if (unlikely(skb1))
+ kfree_skb(skb1);
+}
+
/*
* Multicasts and broadcasts go to each listener.
*
- * Note: called only from the BH handler context,
- * so we don't need to lock the hashes.
+ * Note: called only from the BH handler context.
*/
static int __udp4_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
struct udphdr *uh,
__be32 saddr, __be32 daddr,
struct udp_table *udptable)
{
- struct sock *sk;
+ struct sock *sk, *stack[256 / sizeof(struct sock *)];
struct udp_hslot *hslot = udp_hashslot(udptable, net, ntohs(uh->dest));
int dif;
+ unsigned int i, count = 0;
spin_lock(&hslot->lock);
sk = sk_nulls_head(&hslot->head);
dif = skb->dev->ifindex;
sk = udp_v4_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif);
- if (sk) {
- struct sock *sknext = NULL;
-
- do {
- struct sk_buff *skb1 = skb;
-
- sknext = udp_v4_mcast_next(net, sk_nulls_next(sk), uh->dest,
- daddr, uh->source, saddr,
- dif);
- if (sknext)
- skb1 = skb_clone(skb, GFP_ATOMIC);
-
- if (skb1) {
- int ret = udp_queue_rcv_skb(sk, skb1);
- if (ret > 0)
- /* we should probably re-process instead
- * of dropping packets here. */
- kfree_skb(skb1);
- }
- sk = sknext;
- } while (sknext);
- } else
- consume_skb(skb);
+ while (sk) {
+ stack[count++] = sk;
+ sk = udp_v4_mcast_next(net, sk_nulls_next(sk), uh->dest,
+ daddr, uh->source, saddr, dif);
+ if (unlikely(count == ARRAY_SIZE(stack))) {
+ if (!sk)
+ break;
+ flush_stack(stack, count, skb, ~0);
+ count = 0;
+ }
+ }
+ /*
+ * before releasing chain lock, we must take a reference on sockets
+ */
+ for (i = 0; i < count; i++)
+ sock_hold(stack[i]);
+
spin_unlock(&hslot->lock);
+
+ /*
+ * do the slow work with no lock held
+ */
+ if (count) {
+ flush_stack(stack, count, skb, count - 1);
+
+ for (i = 0; i < count; i++)
+ sock_put(stack[i]);
+ } else {
+ kfree_skb(skb);
+ }
return 0;
}
^ permalink raw reply related
* Re: [PATCH net-next2.6] ipv6: avoid dev_hold()/dev_put() in rawv6_bind()
From: Eric Dumazet @ 2009-11-06 17:01 UTC (permalink / raw)
To: Brian Haley; +Cc: David S. Miller, Linux Netdev List
In-Reply-To: <4AF4536E.7090803@hp.com>
Brian Haley a écrit :
> Eric Dumazet wrote:
>> @@ -257,6 +257,7 @@ static int rawv6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
>> if (sk->sk_state != TCP_CLOSE)
>> goto out;
>>
>> + rcu_read_unlock();
>> /* Check if the address belongs to the host. */
>> if (addr_type != IPV6_ADDR_ANY) {
>> struct net_device *dev = NULL;
>
> This was supposed to be rcu_read_lock(), right?
>
Oops ! Indeed ! Thanks for spotting this Brian.
[PATCH net-next2.6] ipv6: avoid dev_hold()/dev_put() in rawv6_bind()
Using RCU helps not touching device refcount in rawv6_bind()
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
---
net/ipv6/raw.c | 23 +++++++++++------------
1 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 818ef21..926ce8e 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -249,7 +249,7 @@ static int rawv6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
/* Raw sockets are IPv6 only */
if (addr_type == IPV6_ADDR_MAPPED)
- return(-EADDRNOTAVAIL);
+ return -EADDRNOTAVAIL;
lock_sock(sk);
@@ -257,6 +257,7 @@ static int rawv6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
if (sk->sk_state != TCP_CLOSE)
goto out;
+ rcu_read_lock();
/* Check if the address belongs to the host. */
if (addr_type != IPV6_ADDR_ANY) {
struct net_device *dev = NULL;
@@ -272,13 +273,13 @@ static int rawv6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
/* Binding to link-local address requires an interface */
if (!sk->sk_bound_dev_if)
- goto out;
+ goto out_unlock;
- dev = dev_get_by_index(sock_net(sk), sk->sk_bound_dev_if);
- if (!dev) {
- err = -ENODEV;
- goto out;
- }
+ err = -ENODEV;
+ dev = dev_get_by_index_rcu(sock_net(sk),
+ sk->sk_bound_dev_if);
+ if (!dev)
+ goto out_unlock;
}
/* ipv4 addr of the socket is invalid. Only the
@@ -289,13 +290,9 @@ static int rawv6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
err = -EADDRNOTAVAIL;
if (!ipv6_chk_addr(sock_net(sk), &addr->sin6_addr,
dev, 0)) {
- if (dev)
- dev_put(dev);
- goto out;
+ goto out_unlock;
}
}
- if (dev)
- dev_put(dev);
}
inet->inet_rcv_saddr = inet->inet_saddr = v4addr;
@@ -303,6 +300,8 @@ static int rawv6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
if (!(addr_type & IPV6_ADDR_MULTICAST))
ipv6_addr_copy(&np->saddr, &addr->sin6_addr);
err = 0;
+out_unlock:
+ rcu_read_unlock();
out:
release_sock(sk);
return err;
^ permalink raw reply related
* [PATCH net-next-2.6 take2] ipv6: udp: Optimise multicast reception
From: Eric Dumazet @ 2009-11-06 17:06 UTC (permalink / raw)
To: David Miller; +Cc: Lucian Adrian Grijincu, netdev, opurdila
In-Reply-To: <4AF4506B.3080905@gmail.com>
Take 2 of patch, adding a missing kfree_skb() in case no socket could receive a copy
[PATCH net-next-2.6 take2] ipv6: udp: Optimise multicast reception
IPV6 UDP multicast rx path is a bit complex and can hold a spinlock
for a long time.
Using a small (32 or 64 entries) stack of socket pointers can help
to perform expensive operations (skb_clone(), udp_queue_rcv_skb())
outside of the lock, in most cases.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
---
net/ipv6/udp.c | 71 +++++++++++++++++++++++++++++++----------------
1 files changed, 47 insertions(+), 24 deletions(-)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 5bc7cdb..ecb6a6f 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -440,6 +440,27 @@ static struct sock *udp_v6_mcast_next(struct net *net, struct sock *sk,
return NULL;
}
+static void flush_stack(struct sock **stack, unsigned int count,
+ struct sk_buff *skb, unsigned int final)
+{
+ unsigned int i;
+ struct sock *sk;
+ struct sk_buff *skb1;
+
+ for (i = 0; i < count; i++) {
+ skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
+
+ if (skb1) {
+ sk = stack[i];
+ bh_lock_sock(sk);
+ if (!sock_owned_by_user(sk))
+ udpv6_queue_rcv_skb(sk, skb1);
+ else
+ sk_add_backlog(sk, skb1);
+ bh_unlock_sock(sk);
+ }
+ }
+}
/*
* Note: called only from the BH handler context,
* so we don't need to lock the hashes.
@@ -448,41 +469,43 @@ static int __udp6_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
struct in6_addr *saddr, struct in6_addr *daddr,
struct udp_table *udptable)
{
- struct sock *sk, *sk2;
+ struct sock *sk, *stack[256 / sizeof(struct sock *)];
const struct udphdr *uh = udp_hdr(skb);
struct udp_hslot *hslot = udp_hashslot(udptable, net, ntohs(uh->dest));
int dif;
+ unsigned int i, count = 0;
spin_lock(&hslot->lock);
sk = sk_nulls_head(&hslot->head);
dif = inet6_iif(skb);
sk = udp_v6_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif);
- if (!sk) {
- kfree_skb(skb);
- goto out;
- }
-
- sk2 = sk;
- while ((sk2 = udp_v6_mcast_next(net, sk_nulls_next(sk2), uh->dest, daddr,
- uh->source, saddr, dif))) {
- struct sk_buff *buff = skb_clone(skb, GFP_ATOMIC);
- if (buff) {
- bh_lock_sock(sk2);
- if (!sock_owned_by_user(sk2))
- udpv6_queue_rcv_skb(sk2, buff);
- else
- sk_add_backlog(sk2, buff);
- bh_unlock_sock(sk2);
+ while (sk) {
+ stack[count++] = sk;
+ sk = udp_v6_mcast_next(net, sk_nulls_next(sk), uh->dest, daddr,
+ uh->source, saddr, dif);
+ if (unlikely(count == ARRAY_SIZE(stack))) {
+ if (!sk)
+ break;
+ flush_stack(stack, count, skb, ~0);
+ count = 0;
}
}
- bh_lock_sock(sk);
- if (!sock_owned_by_user(sk))
- udpv6_queue_rcv_skb(sk, skb);
- else
- sk_add_backlog(sk, skb);
- bh_unlock_sock(sk);
-out:
+ /*
+ * before releasing the lock, we must take reference on sockets
+ */
+ for (i = 0; i < count; i++)
+ sock_hold(stack[i]);
+
spin_unlock(&hslot->lock);
+
+ if (count) {
+ flush_stack(stack, count, skb, count - 1);
+
+ for (i = 0; i < count; i++)
+ sock_put(stack[i]);
+ } else {
+ kfree_skb(skb);
+ }
return 0;
}
^ permalink raw reply related
* Re: Using netconsole and getting double prints
From: Luis R. Rodriguez @ 2009-11-06 17:14 UTC (permalink / raw)
To: Andre Naujoks; +Cc: Matt Mackall, linux-kernel, netdev
In-Reply-To: <4AF452B8.7080306@googlemail.com>
On Fri, Nov 6, 2009 at 8:45 AM, Andre Naujoks <nautsch2@googlemail.com> wrote:
> I think the intention behind this is for you to check if they are double
> prints on your end or double sends on the other end.
Ah yeah, good point :)
^ permalink raw reply
* Re: [PATCH net-next-2.6 take2] ipv6: udp: Optimise multicast reception
From: Lucian Adrian Grijincu @ 2009-11-06 17:19 UTC (permalink / raw)
To: Eric Dumazet; +Cc: David Miller, netdev, opurdila
In-Reply-To: <4AF45796.8010409@gmail.com>
În data de Vin 06 Noi 2009 19:06:30 Eric Dumazet a scris:
> + for (i = 0; i < count; i++) {
> + skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
> +
> + if (skb1) {
> + sk = stack[i];
> + bh_lock_sock(sk);
> + if (!sock_owned_by_user(sk))
> + udpv6_queue_rcv_skb(sk, skb1);
> + else
> + sk_add_backlog(sk, skb1);
> + bh_unlock_sock(sk);
> + }
> + }
Is there any reason to continue this loop if we ever get a NULL skb1?
If once we can't get a GFP_ATOMIC clone, are there merrits to calling
skb_clone() like crazy (in a very tight loop) (whilst holding a spin lock in
some cases)?
--
Lucian
^ permalink raw reply
* Re: [PATCH net-next-2.6 take2] ipv6: udp: Optimise multicast reception
From: Eric Dumazet @ 2009-11-06 17:24 UTC (permalink / raw)
To: Lucian Adrian Grijincu; +Cc: David Miller, netdev, opurdila
In-Reply-To: <200911061919.47100.lgrijincu@ixiacom.com>
Lucian Adrian Grijincu a écrit :
> În data de Vin 06 Noi 2009 19:06:30 Eric Dumazet a scris:
>> + for (i = 0; i < count; i++) {
>> + skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
>> +
>> + if (skb1) {
>> + sk = stack[i];
>> + bh_lock_sock(sk);
>> + if (!sock_owned_by_user(sk))
>> + udpv6_queue_rcv_skb(sk, skb1);
>> + else
>> + sk_add_backlog(sk, skb1);
>> + bh_unlock_sock(sk);
>> + }
>> + }
>
> Is there any reason to continue this loop if we ever get a NULL skb1?
>
> If once we can't get a GFP_ATOMIC clone, are there merrits to calling
> skb_clone() like crazy (in a very tight loop) (whilst holding a spin lock in
> some cases)?
>
Well, because of future RCU patch, I'll need to continue the loop anyway,
because sock_put() will be part of the loop.
Also, the 'final' case will at least provide the skb we already have.
^ permalink raw reply
* Re: [BUILD-FAILURE] next-20091015 - vbus_enet driver breaks with allmodconfig
From: Randy Dunlap @ 2009-11-06 17:38 UTC (permalink / raw)
To: Gregory Haskins
Cc: Gregory Haskins, Kamalesh Babulal, sfr, greg, netdev, LKML,
linux-next
In-Reply-To: <4AD7A141.3060102@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1079 bytes --]
On Thu, 15 Oct 2009 18:25:05 -0400 Gregory Haskins wrote:
> Randy Dunlap wrote:
> > On Thu, 15 Oct 2009 13:39:44 -0400 Gregory Haskins wrote:
> >
> >>
> >> I am having difficulty reproducing the problem. When I look at the
> >> Kconfig, I see that VBUS_ENET has a "select VBUS_PROXY" as I would
> >> expect. Additionally, if I run allmodconfig I can confirm that I get
> >> VBUS_ENET=m, VBUS_PROXY=y:
> >
> > Greg,
> >
> > Did you try to reproduce it with the ppc64 config file?
> > allmodconfig on what arch?
> >
> > I think the problem is that arch/x86/Kconfig says:
> >
> > source "drivers/vbus/Kconfig"
> >
> > and that should actually be in drivers/Kconfig, so that it applies
> > to ppc64 et al, not just x86.
>
> Ah, indeed. I only have/tried x86, and that is the issue. I will have
> to fix this (and the create_irq() dependency you mention in the next mail).
Hi Greg,
I'm still getting
pci-bridge.c:(.text+0x31b633): undefined reference to `create_irq'
on today's linux-next-20091106.
CONFIG_SMP=n
CONFIG_X86_UP_APIC=n
full config attached.
---
~Randy
[-- Attachment #2: config-r3606 --]
[-- Type: application/octet-stream, Size: 75173 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32-rc6
# Fri Nov 6 00:16:51 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
#
# RCU Subsystem
#
# CONFIG_TREE_RCU is not set
# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
CONFIG_PERF_COUNTERS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLQB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
CONFIG_GCOV_KERNEL=y
# CONFIG_GCOV_PROFILE_ALL is not set
CONFIG_SLOW_WORK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_VMI=y
CONFIG_KVM_CLOCK=y
# CONFIG_KVM_GUEST is not set
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_MVIAC7=y
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_DMI is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=1
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_MCE=y
CONFIG_X86_ANCIENT_MCE=y
# CONFIG_X86_MCE_INJECT is not set
# CONFIG_VM86 is not set
# CONFIG_TOSHIBA is not set
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_CPU_DEBUG=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
# CONFIG_X86_RESERVE_LOW_64K is not set
CONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not set
CONFIG_EFI=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP=y
# CONFIG_PM_SLEEP_ADVANCED_DEBUG is not set
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_RUNTIME=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=m
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_DEBUG_FUNC_TRACE=y
CONFIG_ACPI_PCI_SLOT=y
# CONFIG_X86_PM_TIMER is not set
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=y
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=y
CONFIG_X86_LONGHAUL=m
CONFIG_X86_E_POWERSAVER=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_GOBIOS=y
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_BIOS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
CONFIG_PCI_STUB=y
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
CONFIG_MCA_PROC_FS=y
CONFIG_SCx200=y
CONFIG_SCx200HR_TIMER=y
CONFIG_OLPC=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_PCMCIA_IOCTL is not set
# CONFIG_CARDBUS is not set
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not set
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
CONFIG_VBUS_PROXY=y
CONFIG_VBUS_PCIBRIDGE=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=m
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_MULTIPLE_TABLES is not set
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=m
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
# CONFIG_WAN_ROUTER is not set
CONFIG_PHONET=y
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=m
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_INGRESS=y
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
# CONFIG_NET_CLS_ROUTE4 is not set
CONFIG_NET_CLS_FW=m
# CONFIG_NET_CLS_U32 is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=y
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=y
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=m
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=m
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
# CONFIG_CAN_DEV is not set
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
# CONFIG_ACTISYS_DONGLE is not set
CONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=m
# CONFIG_MA600_DONGLE is not set
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
# CONFIG_ACT200L_DONGLE is not set
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
CONFIG_VIA_FIR=m
# CONFIG_MCS_FIR is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=m
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=m
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
# CONFIG_RFKILL is not set
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_MTD=m
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
CONFIG_MTD_TESTS=m
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=m
# CONFIG_MTD_BLOCK is not set
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
CONFIG_MTD_CFI_LE_BYTE_SWAP=y
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_NETSC520 is not set
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
# CONFIG_MTD_SCx200_DOCFLASH is not set
CONFIG_MTD_AMD76XROM=m
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
# CONFIG_MTD_CK804XROM is not set
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
# CONFIG_MTD_L440GX is not set
# CONFIG_MTD_PCI is not set
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
# CONFIG_MTD_DOCPROBE_HIGH is not set
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND_MUSEUM_IDS=y
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_CS553X is not set
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=m
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
# CONFIG_PARIDE_PT is not set
# CONFIG_PARIDE_PG is not set
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
# CONFIG_PARIDE_FIT2 is not set
CONFIG_PARIDE_FIT3=m
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
# CONFIG_PARIDE_KTTI is not set
CONFIG_PARIDE_ON20=m
# CONFIG_PARIDE_ON26 is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_VIRTIO_BLK is not set
CONFIG_BLK_DEV_HD=y
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
CONFIG_HWLAT_DETECTOR=m
CONFIG_PHANTOM=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HP_ILO=m
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=m
CONFIG_IWMC3200TOP_DEBUG=y
# CONFIG_IWMC3200TOP_DEBUGFS is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_IDE_GD=m
# CONFIG_IDE_GD_ATA is not set
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
CONFIG_BLK_DEV_CMD640=m
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=m
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=m
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
# CONFIG_BLK_DEV_TRIFLEX is not set
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_CS5536=m
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT8172=m
CONFIG_BLK_DEV_IT8213=m
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
CONFIG_BLK_DEV_TC86C001=m
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=m
CONFIG_BLK_DEV_3W_XXXX_RAID=y
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_3W_SAS=m
CONFIG_SCSI_ACARD=m
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC7XXX_OLD=y
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_FLASHPOINT=y
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_FD_MCS=y
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IBMMCA=m
CONFIG_IBMMCA_SCSI_ORDER_STANDARD=y
CONFIG_IBMMCA_SCSI_DEV_RESET=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_NCR_D700=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not set
# CONFIG_SCSI_NCR_Q720 is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_SIM710=m
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_NSP32=m
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_SRP=m
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not set
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=y
# CONFIG_SCSI_OSD_ULD is not set
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=y
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not set
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_IFB=m
# CONFIG_DUMMY is not set
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
CONFIG_VETH=y
# CONFIG_NET_SB1000 is not set
CONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not set
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
# CONFIG_ARCNET_CAP is not set
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=m
CONFIG_REALTEK_PHY=m
# CONFIG_NATIONAL_PHY is not set
CONFIG_STE10XP=m
CONFIG_LSI_ET1011C_PHY=m
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=m
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL3 is not set
# CONFIG_ELMC is not set
# CONFIG_ELMC_II is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=y
CONFIG_NET_VENDOR_SMC=y
CONFIG_ULTRAMCA=y
CONFIG_ETHOC=m
CONFIG_DNET=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
CONFIG_DM9102=y
CONFIG_ULI526X=m
# CONFIG_AT1700 is not set
CONFIG_DEPCA=y
CONFIG_HP100=y
CONFIG_NE2_MCA=y
CONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_KS8842=y
CONFIG_KS8851_MLL=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
# CONFIG_IGBVF is not set
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=y
CONFIG_R8169=m
CONFIG_SIS190=y
# CONFIG_SKGE is not set
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
CONFIG_VIA_VELOCITY=y
# CONFIG_TIGON3 is not set
CONFIG_BNX2=y
CONFIG_CNIC=m
# CONFIG_QLA3XXX is not set
CONFIG_ATL1=m
# CONFIG_ATL1E is not set
CONFIG_ATL1C=y
CONFIG_JME=y
# CONFIG_NETDEV_10000 is not set
CONFIG_TR=m
CONFIG_IBMTR=m
CONFIG_IBMOL=m
# CONFIG_IBMLS is not set
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
CONFIG_SMCTR=m
# CONFIG_WLAN is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_USB=m
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_IWMC3200_SDIO=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
#
# USB Network Adapters
#
CONFIG_USB_CATC=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
# CONFIG_USB_AN2720 is not set
# CONFIG_USB_BELKIN is not set
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_CDC_PHONET is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
# CONFIG_PCMCIA_PCNET is not set
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
# CONFIG_PCMCIA_IBMTR is not set
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
CONFIG_ATM_FIRESTREAM=y
CONFIG_ATM_ZATM=m
CONFIG_ATM_ZATM_DEBUG=y
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=y
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=m
CONFIG_FDDI=m
CONFIG_DEFXX=m
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=y
# CONFIG_VMXNET3 is not set
CONFIG_VBUS_ENET=y
# CONFIG_VBUS_ENET_DEBUG is not set
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
# CONFIG_MISDN is not set
CONFIG_ISDN_PPP=y
# CONFIG_ISDN_PPP_VJ is not set
# CONFIG_ISDN_MPP is not set
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
# CONFIG_HISAX_EURO is not set
# CONFIG_HISAX_1TR6 is not set
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
# CONFIG_HISAX_16_3 is not set
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
# CONFIG_HISAX_ELSA is not set
# CONFIG_HISAX_DIEHLDIVA is not set
# CONFIG_HISAX_SEDLBAUER is not set
CONFIG_HISAX_NICCY=y
# CONFIG_HISAX_GAZEL is not set
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_AVM_A1_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
#
# Active cards
#
# CONFIG_HYSDN is not set
CONFIG_ISDN_HDLC=m
CONFIG_ISDN_CAPI=y
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
# CONFIG_ISDN_CAPI_CAPI20 is not set
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=y
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not set
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
CONFIG_ISDN_DRV_AVMB1_C4=y
# CONFIG_CAPI_EICON is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_MAX7359=m
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_PS2_OLPC=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=m
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_JOYSTICK_WALKERA0701=m
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
# CONFIG_TABLET_USB_AIPTEK is not set
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_DA9034=y
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=y
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
# CONFIG_TOUCHSCREEN_USB_3M is not set
# CONFIG_TOUCHSCREEN_USB_ITM is not set
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_WISTRON_BTNS=y
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_POWERMATE=y
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_CM109=y
# CONFIG_INPUT_UINPUT is not set
CONFIG_INPUT_WINBOND_CIR=m
CONFIG_INPUT_PCF50633_PMU=m
CONFIG_INPUT_WM831X_ON=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=m
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
# CONFIG_VT_CONSOLE is not set
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_RISCOM8 is not set
CONFIG_SPECIALIX=y
CONFIG_STALDRV=y
CONFIG_STALLION=m
# CONFIG_ISTALLION is not set
CONFIG_NOZOMI=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_GEODE is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
# CONFIG_CARDMAN_4000 is not set
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=y
# CONFIG_SCx200_GPIO is not set
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
# CONFIG_CS5535_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
#
# PPS support
#
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_WM831X_POWER=m
CONFIG_WM8350_POWER=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2782=m
# CONFIG_BATTERY_OLPC is not set
CONFIG_BATTERY_BQ27x00=y
CONFIG_BATTERY_DA9030=y
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_CHARGER_PCF50633=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM73=m
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LM95241=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_WM831X=m
CONFIG_SENSORS_WM8350=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ATK0110=m
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_WM831X_WATCHDOG is not set
CONFIG_WM8350_WATCHDOG=y
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=y
CONFIG_ALIM1535_WDT=y
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
CONFIG_SBC_FITPC2_WATCHDOG=y
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=m
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_SCx200_WDT is not set
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
# CONFIG_SBC8360_WDT is not set
CONFIG_SBC7240_WDT=y
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=y
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
CONFIG_W83697HF_WDT=y
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=y
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_SM501=m
CONFIG_HTC_PASIC3=m
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_WM8400=m
CONFIG_MFD_WM831X=m
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_PCF50633=m
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
# CONFIG_AB3100_CORE is not set
CONFIG_MFD_88PM8607=y
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=y
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_CAPTURE_DRIVERS is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=m
# CONFIG_AGP_ATI is not set
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD64=m
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=m
# CONFIG_AGP_SIS is not set
CONFIG_AGP_SWORKS=y
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_VGA_ARB=y
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=m
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=y
CONFIG_FB_UVESA=y
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=y
CONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=m
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=m
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=y
# CONFIG_FB_ARK is not set
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
# CONFIG_FB_GEODE_LX is not set
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=y
CONFIG_FB_TMIO=m
CONFIG_FB_TMIO_ACCELL=y
# CONFIG_FB_SM501 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_DA903X=m
CONFIG_BACKLIGHT_MBP_NVIDIA=m
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_WM831X=m
CONFIG_BACKLIGHT_ADP5520=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_PCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
# CONFIG_SND_USB_CAIAQ_INPUT is not set
CONFIG_SND_USB_US122L=m
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_VMIDI is not set
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
# CONFIG_SOUND_MPU401 is not set
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_KAHLUA is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=y
CONFIG_USB_MOUSE=m
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
# CONFIG_HID_EZKEY is not set
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=m
# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_MON=m
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_HCD_DEBUGGING=y
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=y
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_SSB=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_ATM=y
# CONFIG_USB_SPEEDTOUCH is not set
# CONFIG_USB_CXACRU is not set
CONFIG_USB_UEAGLEATM=y
# CONFIG_USB_XUSBATM is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
CONFIG_USB_GADGET_R8A66597=y
CONFIG_USB_R8A66597=y
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_AUDIO=m
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_USB_ETH_EEM=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=m
CONFIG_UWB_WLP=y
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_MMC_BLOCK is not set
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MEMSTICK=m
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_WM831X_STATUS is not set
CONFIG_LEDS_WM8350=m
CONFIG_LEDS_DA903X=y
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_MM_EDAC=m
# CONFIG_EDAC_AMD76X is not set
CONFIG_EDAC_E7XXX=m
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82975X is not set
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
# CONFIG_EDAC_I7CORE is not set
# CONFIG_EDAC_I82860 is not set
CONFIG_EDAC_R82600=m
# CONFIG_EDAC_I5000 is not set
CONFIG_EDAC_I5100=m
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_SMX is not set
CONFIG_UIO_AEC=m
# CONFIG_UIO_SERCOS3 is not set
CONFIG_UIO_PCI_GENERIC=m
#
# TI VLYNQ
#
CONFIG_STAGING=y
CONFIG_STAGING_EXCLUDE_BUILD=y
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
CONFIG_ACERHDF=m
CONFIG_ASUS_LAPTOP=m
CONFIG_FUJITSU_LAPTOP=y
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
# CONFIG_TC1100_WMI is not set
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=y
CONFIG_COMPAL_LAPTOP=y
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
CONFIG_ACPI_TOSHIBA=m
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_EFI_VARS is not set
CONFIG_DELL_RBU=m
# CONFIG_DCDBAS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
# CONFIG_EXT4_FS_XATTR is not set
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=m
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CEPH_FS=y
CONFIG_CEPH_FS_PRETTYDEBUG=y
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=m
# CONFIG_NCPFS_PACKET_SIGNING is not set
CONFIG_NCPFS_IOCTL_LOCKING=y
# CONFIG_NCPFS_STRONG is not set
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=y
CONFIG_AFS_FS=m
CONFIG_AFS_DEBUG=y
# CONFIG_AFS_FSCACHE is not set
CONFIG_9P_FS=m
# CONFIG_9P_FSCACHE is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
# CONFIG_DETECT_SOFTLOCKUP is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
CONFIG_DEBUG_KMEMLEAK_TEST=m
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_WRITECOUNT=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
# CONFIG_LKDTM is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SYSPROF_TRACER=y
# CONFIG_SCHED_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_BOOT_TRACER is not set
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_TRACING_BRANCHES=y
CONFIG_BRANCH_TRACER=y
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_RING_BUFFER_BENCHMARK=m
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=2
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y
CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19
CONFIG_SECURITY_SMACK=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
CONFIG_IMA_LSM_RULES=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y
CONFIG_SHM_SIGNAL=y
CONFIG_IOQ=y
^ permalink raw reply
* [net-2.6 PATCH 0/2] qlge: EEH and Mbox command fixes.
From: Ron Mercer @ 2009-11-06 17:44 UTC (permalink / raw)
To: davem; +Cc: netdev, ron.mercer
Dave,
Patch 1 adds a line that I accidentally omitted from the previous patch on 10/26.
Patch 2 changes the EEH PCIe reset type to fundamental as required by
this device.
Regards,
Ron Mercer
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox