* Re: [net-next-2.6 PATCH 3/3] net: forbid underlaying devices to change its type
From: Jay Vosburgh @ 2010-03-10 21:04 UTC (permalink / raw)
To: Jiri Pirko; +Cc: netdev, bonding-devel, davem, shemminger, kaber
In-Reply-To: <20100310203019.GF2834@psychotron.redhat.com>
Jiri Pirko <jpirko@redhat.com> wrote:
>It's not desired for underlaying devices to change type. At the time, there is
>for example possible to have bond with changed type from Ethernet to Infiniband
>as a port of a bridge. This patch fixes this.
Do the current initscripts / sysconfig packages do things such
that this restriction won't break things? I.e., do those packages have
a dependency on being able to change the type after setting up, e.g., a
VLAN over bonding on Infiniband?
This isn't to suggest that this change should be rejected if the
above is true; rather, I'm curious as to how this came up as a problem,
and whether initscripts / sysconfig require concurrent changes.
In any event, it all seems reasonable to me, so, at least for
the bonding bits:
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
-J
>Signed-off-by: Jiri Pirko <jpirko@redhat.com>
>---
> drivers/net/macvlan.c | 3 +++
> net/8021q/vlan.c | 4 ++++
> net/bridge/br_notify.c | 4 ++++
> 3 files changed, 11 insertions(+), 0 deletions(-)
>
>diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
>index 40faa36..445e73c 100644
>--- a/drivers/net/macvlan.c
>+++ b/drivers/net/macvlan.c
>@@ -748,6 +748,9 @@ static int macvlan_device_event(struct notifier_block *unused,
> list_for_each_entry_safe(vlan, next, &port->vlans, list)
> vlan->dev->rtnl_link_ops->dellink(vlan->dev, NULL);
> break;
>+ case NETDEV_PRE_TYPE_CHANGE:
>+ /* Forbid underlaying device to change its type. */
>+ return NOTIFY_BAD;
> }
> return NOTIFY_DONE;
> }
>diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
>index 4535122..c39a5f4 100644
>--- a/net/8021q/vlan.c
>+++ b/net/8021q/vlan.c
>@@ -530,6 +530,10 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event,
> }
> unregister_netdevice_many(&list);
> break;
>+
>+ case NETDEV_PRE_TYPE_CHANGE:
>+ /* Forbid underlaying device to change its type. */
>+ return NOTIFY_BAD;
> }
>
> out:
>diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c
>index 763a3ec..1413b72 100644
>--- a/net/bridge/br_notify.c
>+++ b/net/bridge/br_notify.c
>@@ -82,6 +82,10 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v
> case NETDEV_UNREGISTER:
> br_del_if(br, dev);
> break;
>+
>+ case NETDEV_PRE_TYPE_CHANGE:
>+ /* Forbid underlaying device to change its type. */
>+ return NOTIFY_BAD;
> }
>
> /* Events that may cause spanning tree to refresh */
>--
>1.6.6.1
>
>--
>To unsubscribe from this list: send the line "unsubscribe netdev" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [net-next-2.6 PATCH 3/3] net: forbid underlaying devices to change its type
From: Jiri Pirko @ 2010-03-10 20:30 UTC (permalink / raw)
To: netdev; +Cc: fubar, bonding-devel, davem, shemminger, kaber
In-Reply-To: <20100310202804.GC2834@psychotron.redhat.com>
It's not desired for underlaying devices to change type. At the time, there is
for example possible to have bond with changed type from Ethernet to Infiniband
as a port of a bridge. This patch fixes this.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
---
drivers/net/macvlan.c | 3 +++
net/8021q/vlan.c | 4 ++++
net/bridge/br_notify.c | 4 ++++
3 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 40faa36..445e73c 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -748,6 +748,9 @@ static int macvlan_device_event(struct notifier_block *unused,
list_for_each_entry_safe(vlan, next, &port->vlans, list)
vlan->dev->rtnl_link_ops->dellink(vlan->dev, NULL);
break;
+ case NETDEV_PRE_TYPE_CHANGE:
+ /* Forbid underlaying device to change its type. */
+ return NOTIFY_BAD;
}
return NOTIFY_DONE;
}
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 4535122..c39a5f4 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -530,6 +530,10 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event,
}
unregister_netdevice_many(&list);
break;
+
+ case NETDEV_PRE_TYPE_CHANGE:
+ /* Forbid underlaying device to change its type. */
+ return NOTIFY_BAD;
}
out:
diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c
index 763a3ec..1413b72 100644
--- a/net/bridge/br_notify.c
+++ b/net/bridge/br_notify.c
@@ -82,6 +82,10 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v
case NETDEV_UNREGISTER:
br_del_if(br, dev);
break;
+
+ case NETDEV_PRE_TYPE_CHANGE:
+ /* Forbid underlaying device to change its type. */
+ return NOTIFY_BAD;
}
/* Events that may cause spanning tree to refresh */
--
1.6.6.1
^ permalink raw reply related
* [net-next-2.6 PATCH 2/3] bonding: check return value of nofitier when changing type
From: Jiri Pirko @ 2010-03-10 20:29 UTC (permalink / raw)
To: netdev; +Cc: fubar, bonding-devel, davem, shemminger, kaber
In-Reply-To: <20100310202804.GC2834@psychotron.redhat.com>
This patch adds the possibility to refuse the bonding type change for other
subsystems (such as for example bridge, vlan, etc.)
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
---
drivers/net/bonding/bond_main.c | 11 +++++++++--
include/linux/netdevice.h | 2 +-
net/core/dev.c | 4 ++--
3 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 7eeb187..cbe9e35 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1480,8 +1480,15 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
bond_dev->name,
bond_dev->type, slave_dev->type);
- netdev_bonding_change(bond_dev,
- NETDEV_PRE_TYPE_CHANGE);
+ res = netdev_bonding_change(bond_dev,
+ NETDEV_PRE_TYPE_CHANGE);
+ res = notifier_to_errno(res);
+ if (res) {
+ pr_err("%s: refused to change device type\n",
+ bond_dev->name);
+ res = -EBUSY;
+ goto err_undo_flags;
+ }
if (slave_dev->type != ARPHRD_ETHER)
bond_setup_by_slave(bond_dev, slave_dev);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index c79a88b..8cf1d50 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1975,7 +1975,7 @@ extern void __dev_addr_unsync(struct dev_addr_list **to, int *to_count, struct
extern int dev_set_promiscuity(struct net_device *dev, int inc);
extern int dev_set_allmulti(struct net_device *dev, int inc);
extern void netdev_state_change(struct net_device *dev);
-extern void netdev_bonding_change(struct net_device *dev,
+extern int netdev_bonding_change(struct net_device *dev,
unsigned long event);
extern void netdev_features_change(struct net_device *dev);
/* Load a device via the kmod */
diff --git a/net/core/dev.c b/net/core/dev.c
index bcc490c..5de4a15 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1084,9 +1084,9 @@ void netdev_state_change(struct net_device *dev)
}
EXPORT_SYMBOL(netdev_state_change);
-void netdev_bonding_change(struct net_device *dev, unsigned long event)
+int netdev_bonding_change(struct net_device *dev, unsigned long event)
{
- call_netdevice_notifiers(event, dev);
+ return call_netdevice_notifiers(event, dev);
}
EXPORT_SYMBOL(netdev_bonding_change);
--
1.6.6.1
^ permalink raw reply related
* [net-next-2.6 PATCH 1/3] net: rename notifier defines for netdev type change
From: Jiri Pirko @ 2010-03-10 20:28 UTC (permalink / raw)
To: netdev; +Cc: fubar, bonding-devel, davem, shemminger, kaber
In-Reply-To: <20100310202804.GC2834@psychotron.redhat.com>
Since generally there could be more netdevices changing type other than bonding,
making this event type name "bonding-unrelated"
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
---
drivers/net/bonding/bond_main.c | 6 ++++--
include/linux/notifier.h | 4 ++--
net/ipv4/devinet.c | 4 ++--
net/ipv6/addrconf.c | 16 ++++++++--------
4 files changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 430c022..7eeb187 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1480,14 +1480,16 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
bond_dev->name,
bond_dev->type, slave_dev->type);
- netdev_bonding_change(bond_dev, NETDEV_BONDING_OLDTYPE);
+ netdev_bonding_change(bond_dev,
+ NETDEV_PRE_TYPE_CHANGE);
if (slave_dev->type != ARPHRD_ETHER)
bond_setup_by_slave(bond_dev, slave_dev);
else
ether_setup(bond_dev);
- netdev_bonding_change(bond_dev, NETDEV_BONDING_NEWTYPE);
+ netdev_bonding_change(bond_dev,
+ NETDEV_POST_TYPE_CHANGE);
}
} else if (bond_dev->type != slave_dev->type) {
pr_err("%s ether type (%d) is different from other slaves (%d), can not enslave it.\n",
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index fee6c2f..f3635fc 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -199,8 +199,8 @@ static inline int notifier_to_errno(int ret)
#define NETDEV_FEAT_CHANGE 0x000B
#define NETDEV_BONDING_FAILOVER 0x000C
#define NETDEV_PRE_UP 0x000D
-#define NETDEV_BONDING_OLDTYPE 0x000E
-#define NETDEV_BONDING_NEWTYPE 0x000F
+#define NETDEV_PRE_TYPE_CHANGE 0x000E
+#define NETDEV_POST_TYPE_CHANGE 0x000F
#define NETDEV_POST_INIT 0x0010
#define NETDEV_UNREGISTER_BATCH 0x0011
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 51ca946..c75320e 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1095,10 +1095,10 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
case NETDEV_DOWN:
ip_mc_down(in_dev);
break;
- case NETDEV_BONDING_OLDTYPE:
+ case NETDEV_PRE_TYPE_CHANGE:
ip_mc_unmap(in_dev);
break;
- case NETDEV_BONDING_NEWTYPE:
+ case NETDEV_POST_TYPE_CHANGE:
ip_mc_remap(in_dev);
break;
case NETDEV_CHANGEMTU:
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 88fd8c5..bf5349b 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -137,8 +137,8 @@ static DEFINE_SPINLOCK(addrconf_verify_lock);
static void addrconf_join_anycast(struct inet6_ifaddr *ifp);
static void addrconf_leave_anycast(struct inet6_ifaddr *ifp);
-static void addrconf_bonding_change(struct net_device *dev,
- unsigned long event);
+static void addrconf_type_change(struct net_device *dev,
+ unsigned long event);
static int addrconf_ifdown(struct net_device *dev, int how);
static void addrconf_dad_start(struct inet6_ifaddr *ifp, u32 flags);
@@ -2582,9 +2582,9 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event,
return notifier_from_errno(err);
}
break;
- case NETDEV_BONDING_OLDTYPE:
- case NETDEV_BONDING_NEWTYPE:
- addrconf_bonding_change(dev, event);
+ case NETDEV_PRE_TYPE_CHANGE:
+ case NETDEV_POST_TYPE_CHANGE:
+ addrconf_type_change(dev, event);
break;
}
@@ -2599,16 +2599,16 @@ static struct notifier_block ipv6_dev_notf = {
.priority = 0
};
-static void addrconf_bonding_change(struct net_device *dev, unsigned long event)
+static void addrconf_type_change(struct net_device *dev, unsigned long event)
{
struct inet6_dev *idev;
ASSERT_RTNL();
idev = __in6_dev_get(dev);
- if (event == NETDEV_BONDING_NEWTYPE)
+ if (event == NETDEV_POST_TYPE_CHANGE)
ipv6_mc_remap(idev);
- else if (event == NETDEV_BONDING_OLDTYPE)
+ else if (event == NETDEV_PRE_TYPE_CHANGE)
ipv6_mc_unmap(idev);
}
--
1.6.6.1
^ permalink raw reply related
* [net-next-2.6 PATCH 0/3] bonding: refuse to change bond type if it's used V3
From: Jiri Pirko @ 2010-03-10 20:28 UTC (permalink / raw)
To: netdev; +Cc: fubar, bonding-devel, davem, shemminger, kaber
v2->v3:
-changed defines name to NETDEV_[PRE/POST]_TYPE_CHANGE
-added bits for vlan and macvlan
Reworked version of patch/patchset. This time I use netdevice notifier as
Stephen suggested. Changed the name of the original ones (NETDEV_BONDING_*TYPE)
to be more general and reused them.
Jirka
^ permalink raw reply
* Re: [PATCH RFC] fix problems with NETIF_F_HIGHDMA in networking drivers v2
From: Roland Dreier @ 2010-03-10 20:17 UTC (permalink / raw)
To: Robert Hancock
Cc: linux-kernel, netdev, Linux-usb, David Miller,
Bartlomiej Zolnierkiewicz
In-Reply-To: <4B8F213B.40603@gmail.com>
> diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
> index df3eb8c..53be462 100644
> --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
> +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
> @@ -1058,7 +1058,7 @@ static void ipoib_setup(struct net_device *dev)
> dev->type = ARPHRD_INFINIBAND;
> dev->tx_queue_len = ipoib_sendq_size * 2;
> dev->features = (NETIF_F_VLAN_CHALLENGED |
> - NETIF_F_HIGHDMA);
> + NETIF_F_DMA_HIGH);
> dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
>
> memcpy(dev->broadcast, ipv4_bcast_addr, INFINIBAND_ALEN);
Been meaning to mention this for a bit, but ipoib is capable of handling
any DMA address, so if I understand your patch correctly, this can be
NETIF_F_DMA_64BIT instead of just DMA_HIGH.
--
Roland Dreier <rolandd@cisco.com>
For corporate legal information go to:
http://www.cisco.com/web/about/doing_business/legal/cri/index.html
^ permalink raw reply
* WebCT Service Helpdesk
From: Kwon, Janice [VA] @ 2010-03-10 19:19 UTC (permalink / raw)
To: info@webct.com
Your mailbox has exceeded one or more size limits set by your administrator.
Your mailbox size is 239787 KB. Mailbox size limits:You may not be able to send or receive new mail until you reduce your mailbox size. To re-set your SPACE on our database prior to maintenance on your INBOX:
CLICK HERE:<http://sissurvey.net/app/survey/survey.aspx?id=952>
Regards
WebCT Service Helpdesk
^ permalink raw reply
* Re: [PATCH] drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages
From: Mikael Pettersson @ 2010-03-10 19:16 UTC (permalink / raw)
To: Joe Perches; +Cc: David Miller, mikpe, netdev, grundler, kyle, linux-kernel
In-Reply-To: <1268242457.1545.347.camel@Joe-Laptop.home>
Joe Perches writes:
> On Wed, 2010-03-10 at 08:41 -0800, David Miller wrote:
> > From: Mikael Pettersson <mikpe@it.uu.se>
> > Date: Wed, 10 Mar 2010 16:33:28 +0100
> > > Booting 2.6.34-rc1 on a machine with a tulip nic I see
> > > a number of kernel messages that include "(null)" where
> > > previous kernels included the string "tulip0":
> > CC:'ing the guilty party :-) It's one of the following
> > commits:
>
> Thanks Mikael.
>
> Anonymity has some good attributes.
> Blame avoidance is one of them.
>
> I've broad shoulders. It's me, then Dwight Howard...
>
> There might be another few of these where ->name or ->dev
> was used before struct device or net_device was registered.
> I'll go back and check.
>
> tulip_core has:
>
> if (tp->flags & HAS_MEDIA_TABLE) {
> sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */
> tulip_parse_eeprom(dev);
> strcpy(dev->name, "eth%d"); /* un-hack */
> }
>
> So I don't feel _too_ bad.
>
> tulip_parse_eeprom is done before register_netdev so the logging
> there can not use netdev_<level> or dev_<level>(&dev->dev
>
> Signed-off-by: Joe Perches <joe@perches.com>
> drivers/net/tulip/eeprom.c | 54 ++++++++++++++++++++++++-------------------
> 1 files changed, 30 insertions(+), 24 deletions(-)
Thanks, that fixed it:
tulip 0000:00:0f.0: enabling device (0014 -> 0017)
tulip0: EEPROM default media type Autosense
tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block
tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block
tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block
tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block
tulip0: Index #4 - Media 100baseTx (#3) described by a 21143 reset method (5) block
net eth0: Digital DS21142/43 Tulip rev 48 at Port 0x800, 00:00:c5:50:f9:51, IRQ 25
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
> ---
> diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
> index 93f4e83..49f05d1 100644
> --- a/drivers/net/tulip/eeprom.c
> +++ b/drivers/net/tulip/eeprom.c
> @@ -143,6 +143,12 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
>
> void __devinit tulip_parse_eeprom(struct net_device *dev)
> {
> + /*
> + dev is not registered at this point, so logging messages can't
> + use dev_<level> or netdev_<level> but dev->name is good via a
> + hack in the caller
> + */
> +
> /* The last media info list parsed, for multiport boards. */
> static struct mediatable *last_mediatable;
> static unsigned char *last_ee_data;
> @@ -161,15 +167,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
> if (ee_data[0] == 0xff) {
> if (last_mediatable) {
> controller_index++;
> - dev_info(&dev->dev,
> - "Controller %d of multiport board\n",
> - controller_index);
> + pr_info("%s: Controller %d of multiport board\n",
> + dev->name, controller_index);
> tp->mtable = last_mediatable;
> ee_data = last_ee_data;
> goto subsequent_board;
> } else
> - dev_info(&dev->dev,
> - "Missing EEPROM, this interface may not work correctly!\n");
> + pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
> + dev->name);
> return;
> }
> /* Do a fix-up based on the vendor half of the station address prefix. */
> @@ -181,15 +186,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
> i++; /* An Accton EN1207, not an outlaw Maxtech. */
> memcpy(ee_data + 26, eeprom_fixups[i].newtable,
> sizeof(eeprom_fixups[i].newtable));
> - dev_info(&dev->dev,
> - "Old format EEPROM on '%s' board. Using substitute media control info\n",
> - eeprom_fixups[i].name);
> + pr_info("%s: Old format EEPROM on '%s' board. Using substitute media control info\n",
> + dev->name, eeprom_fixups[i].name);
> break;
> }
> }
> if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
> - dev_info(&dev->dev,
> - "Old style EEPROM with no media selection information\n");
> + pr_info("%s: Old style EEPROM with no media selection information\n",
> + dev->name);
> return;
> }
> }
> @@ -217,8 +221,8 @@ subsequent_board:
> /* there is no phy information, don't even try to build mtable */
> if (count == 0) {
> if (tulip_debug > 0)
> - dev_warn(&dev->dev,
> - "no phy info, aborting mtable build\n");
> + pr_warning("%s: no phy info, aborting mtable build\n",
> + dev->name);
> return;
> }
>
> @@ -234,8 +238,10 @@ subsequent_board:
> mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
> mtable->csr15dir = mtable->csr15val = 0;
>
> - dev_info(&dev->dev, "EEPROM default media type %s\n",
> - media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
> + pr_info("%s: EEPROM default media type %s\n",
> + dev->name,
> + media & 0x0800 ? "Autosense"
> + : medianame[media & MEDIA_MASK]);
> for (i = 0; i < count; i++) {
> struct medialeaf *leaf = &mtable->mleaf[i];
>
> @@ -298,17 +304,17 @@ subsequent_board:
> }
> if (tulip_debug > 1 && leaf->media == 11) {
> unsigned char *bp = leaf->leafdata;
> - dev_info(&dev->dev,
> - "MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
> - bp[0], bp[1], bp[2 + bp[1]*2],
> - bp[5 + bp[2 + bp[1]*2]*2],
> - bp[4 + bp[2 + bp[1]*2]*2]);
> + pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
> + dev->name,
> + bp[0], bp[1], bp[2 + bp[1]*2],
> + bp[5 + bp[2 + bp[1]*2]*2],
> + bp[4 + bp[2 + bp[1]*2]*2]);
> }
> - dev_info(&dev->dev,
> - "Index #%d - Media %s (#%d) described by a %s (%d) block\n",
> - i, medianame[leaf->media & 15], leaf->media,
> - leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
> - leaf->type);
> + pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
> + dev->name,
> + i, medianame[leaf->media & 15], leaf->media,
> + leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
> + leaf->type);
> }
> if (new_advertise)
> tp->sym_advertise = new_advertise;
>
>
^ permalink raw reply
* Re: [RFC PATCH] bnx2x: fix tx queue locking and memory barriers
From: David Howells @ 2010-03-10 18:32 UTC (permalink / raw)
To: David Miller; +Cc: dhowells, sgruszka, vladz, paulmck, netdev, eilong
In-Reply-To: <20100310.094921.211568569.davem@davemloft.net>
David Miller <davem@davemloft.net> wrote:
> > The barrier() didn't tell the compiler that fp->tx_bd_prod and
> > fp->tx_bd_cons could change. What it did was to say that the accesses to
> > those two variables must be performed after all the other accesses issued
> > by that CPU prior to the barrier - at least as far as the compiler is
> > concerned.
>
> barrier() has a "memory" asm clobber which says that all memory could
> have changed.
Indeed, but only as far as the compiler is concerned.
However, the problem is almost certainly not this, but that the item to be
read from the buffer may not have been written yet by the producing CPU, even
though it's written the head pointer.
David
^ permalink raw reply
* [PATCH 6/6] smsc95xx: remove unnecessary variables
From: Steve Glendinning @ 2010-03-10 18:32 UTC (permalink / raw)
To: netdev
In-Reply-To: <1268245959-13861-6-git-send-email-steve.glendinning@smsc.com>
Removes unnecessary variables as smsc95xx_write_reg takes its
value by parameter. Early versions passed this parameter by
reference.
Also replace hardcoded interrupt status value with a #define
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
drivers/net/usb/smsc95xx.c | 29 +++++++++--------------------
drivers/net/usb/smsc95xx.h | 1 +
2 files changed, 10 insertions(+), 20 deletions(-)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index aeaa793..18adc39 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -485,15 +485,13 @@ static int smsc95xx_link_reset(struct usbnet *dev)
struct ethtool_cmd ecmd;
unsigned long flags;
u16 lcladv, rmtadv;
- u32 intdata;
int ret;
/* clear interrupt status */
ret = smsc95xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
check_warn_return(ret, "Error reading PHY_INT_SRC");
- intdata = 0xFFFFFFFF;
- ret = smsc95xx_write_reg(dev, INT_STS, intdata);
+ ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
check_warn_return(ret, "Error writing INT_STS");
mii_check_media(mii, 1, 1);
@@ -700,7 +698,6 @@ static int smsc95xx_start_tx_path(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
unsigned long flags;
- u32 reg_val;
int ret;
/* Enable Tx at MAC */
@@ -712,8 +709,7 @@ static int smsc95xx_start_tx_path(struct usbnet *dev)
check_warn_return(ret, "Failed to write MAC_CR: %d\n", ret);
/* Enable Tx at SCSRs */
- reg_val = TX_CFG_ON_;
- ret = smsc95xx_write_reg(dev, TX_CFG, reg_val);
+ ret = smsc95xx_write_reg(dev, TX_CFG, TX_CFG_ON_);
check_warn_return(ret, "Failed to write TX_CFG: %d\n", ret);
return 0;
@@ -786,8 +782,7 @@ static int smsc95xx_reset(struct usbnet *dev)
netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n");
- write_buf = HW_CFG_LRST_;
- ret = smsc95xx_write_reg(dev, HW_CFG, write_buf);
+ ret = smsc95xx_write_reg(dev, HW_CFG, HW_CFG_LRST_);
check_warn_return(ret, "Failed to write HW_CFG: %d\n", ret);
timeout = 0;
@@ -803,8 +798,7 @@ static int smsc95xx_reset(struct usbnet *dev)
return ret;
}
- write_buf = PM_CTL_PHY_RST_;
- ret = smsc95xx_write_reg(dev, PM_CTRL, write_buf);
+ ret = smsc95xx_write_reg(dev, PM_CTRL, PM_CTL_PHY_RST_);
check_warn_return(ret, "Failed to write PM_CTRL: %d\n", ret);
timeout = 0;
@@ -871,8 +865,7 @@ static int smsc95xx_reset(struct usbnet *dev)
"Read Value from BURST_CAP after writing: 0x%08x\n",
read_buf);
- read_buf = DEFAULT_BULK_IN_DELAY;
- ret = smsc95xx_write_reg(dev, BULK_IN_DLY, read_buf);
+ ret = smsc95xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
check_warn_return(ret, "Failed to write BULK_IN_DLY: %d\n", ret);
ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
@@ -905,8 +898,7 @@ static int smsc95xx_reset(struct usbnet *dev)
netif_dbg(dev, ifup, dev->net,
"Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
- write_buf = 0xFFFFFFFF;
- ret = smsc95xx_write_reg(dev, INT_STS, write_buf);
+ ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
check_warn_return(ret, "Failed to write INT_STS: %d\n", ret);
ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
@@ -921,12 +913,10 @@ static int smsc95xx_reset(struct usbnet *dev)
check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d\n", ret);
/* Init Tx */
- write_buf = 0;
- ret = smsc95xx_write_reg(dev, FLOW, write_buf);
+ ret = smsc95xx_write_reg(dev, FLOW, 0);
check_warn_return(ret, "Failed to write FLOW: %d\n", ret);
- read_buf = AFC_CFG_DEFAULT;
- ret = smsc95xx_write_reg(dev, AFC_CFG, read_buf);
+ ret = smsc95xx_write_reg(dev, AFC_CFG, AFC_CFG_DEFAULT);
check_warn_return(ret, "Failed to write AFC_CFG: %d\n", ret);
/* Don't need mac_cr_lock during initialisation */
@@ -935,8 +925,7 @@ static int smsc95xx_reset(struct usbnet *dev)
/* Init Rx */
/* Set Vlan */
- write_buf = (u32)ETH_P_8021Q;
- ret = smsc95xx_write_reg(dev, VLAN1, write_buf);
+ ret = smsc95xx_write_reg(dev, VLAN1, (u32)ETH_P_8021Q);
check_warn_return(ret, "Failed to write VLAN1: %d\n", ret);
/* Enable or disable checksum offload engines */
diff --git a/drivers/net/usb/smsc95xx.h b/drivers/net/usb/smsc95xx.h
index 86bc449..a275b62 100644
--- a/drivers/net/usb/smsc95xx.h
+++ b/drivers/net/usb/smsc95xx.h
@@ -63,6 +63,7 @@
#define INT_STS_TDFO_ (0x00001000)
#define INT_STS_RXDF_ (0x00000800)
#define INT_STS_GPIOS_ (0x000007FF)
+#define INT_STS_CLEAR_ALL_ (0xFFFFFFFF)
#define RX_CFG (0x0C)
#define RX_FIFO_FLUSH_ (0x00000001)
--
1.6.6.1
^ permalink raw reply related
* [PATCH 5/6] smsc95xx: check return code from control messages
From: Steve Glendinning @ 2010-03-10 18:32 UTC (permalink / raw)
To: netdev
In-Reply-To: <1268245959-13861-5-git-send-email-steve.glendinning@smsc.com>
This patch adds additional checks of the values returned by
smsc95xx_(read|write)_reg, and wraps their common patterns
in macros.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
drivers/net/usb/smsc95xx.c | 302 +++++++++++++++++++-------------------------
1 files changed, 128 insertions(+), 174 deletions(-)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 56fe73d..aeaa793 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -47,6 +47,15 @@
#define SMSC95XX_TX_OVERHEAD_CSUM (12)
#define USB_VENDOR_ID_SMSC (0x0424)
+#define check_warn(ret, fmt, args...) \
+ ({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
+
+#define check_warn_return(ret, format, args...) \
+ ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); return ret; } })
+
+#define check_warn_goto_done(ret, format, args...) \
+ ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); goto done; } })
+
struct smsc95xx_priv {
u32 mac_cr;
spinlock_t mac_cr_lock;
@@ -63,7 +72,8 @@ static int turbo_mode = true;
module_param(turbo_mode, bool, 0644);
MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
-static int smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data)
+static int __must_check smsc95xx_read_reg(struct usbnet *dev, u32 index,
+ u32 *data)
{
u32 *buf = kmalloc(4, GFP_KERNEL);
int ret;
@@ -88,7 +98,8 @@ static int smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data)
return ret;
}
-static int smsc95xx_write_reg(struct usbnet *dev, u32 index, u32 data)
+static int __must_check smsc95xx_write_reg(struct usbnet *dev, u32 index,
+ u32 data)
{
u32 *buf = kmalloc(4, GFP_KERNEL);
int ret;
@@ -120,9 +131,12 @@ static int smsc95xx_phy_wait_not_busy(struct usbnet *dev)
{
unsigned long start_time = jiffies;
u32 val;
+ int ret;
do {
- smsc95xx_read_reg(dev, MII_ADDR, &val);
+ ret = smsc95xx_read_reg(dev, MII_ADDR, &val);
+ check_warn_return(ret, "Error reading MII_ACCESS");
+
if (!(val & MII_BUSY_))
return 0;
} while (!time_after(jiffies, start_time + HZ));
@@ -134,33 +148,32 @@ static int smsc95xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
{
struct usbnet *dev = netdev_priv(netdev);
u32 val, addr;
+ int ret;
mutex_lock(&dev->phy_mutex);
/* confirm MII not busy */
- if (smsc95xx_phy_wait_not_busy(dev)) {
- netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_read\n");
- mutex_unlock(&dev->phy_mutex);
- return -EIO;
- }
+ ret = smsc95xx_phy_wait_not_busy(dev);
+ check_warn_goto_done(ret, "MII is busy in smsc95xx_mdio_read");
/* set the address, index & direction (read from PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
addr = (phy_id << 11) | (idx << 6) | MII_READ_;
- smsc95xx_write_reg(dev, MII_ADDR, addr);
+ ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
+ check_warn_goto_done(ret, "Error writing MII_ACCESS");
- if (smsc95xx_phy_wait_not_busy(dev)) {
- netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx);
- mutex_unlock(&dev->phy_mutex);
- return -EIO;
- }
+ ret = smsc95xx_phy_wait_not_busy(dev);
+ check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx);
- smsc95xx_read_reg(dev, MII_DATA, &val);
+ ret = smsc95xx_read_reg(dev, MII_DATA, &val);
+ check_warn_goto_done(ret, "Error reading MII_DATA");
- mutex_unlock(&dev->phy_mutex);
+ ret = (u16)(val & 0xFFFF);
- return (u16)(val & 0xFFFF);
+done:
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
}
static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
@@ -168,28 +181,29 @@ static void smsc95xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
{
struct usbnet *dev = netdev_priv(netdev);
u32 val, addr;
+ int ret;
mutex_lock(&dev->phy_mutex);
/* confirm MII not busy */
- if (smsc95xx_phy_wait_not_busy(dev)) {
- netdev_warn(dev->net, "MII is busy in smsc95xx_mdio_write\n");
- mutex_unlock(&dev->phy_mutex);
- return;
- }
+ ret = smsc95xx_phy_wait_not_busy(dev);
+ check_warn_goto_done(ret, "MII is busy in smsc95xx_mdio_write");
val = regval;
- smsc95xx_write_reg(dev, MII_DATA, val);
+ ret = smsc95xx_write_reg(dev, MII_DATA, val);
+ check_warn_goto_done(ret, "Error writing MII_DATA");
/* set the address, index & direction (write to PHY) */
phy_id &= dev->mii.phy_id_mask;
idx &= dev->mii.reg_num_mask;
addr = (phy_id << 11) | (idx << 6) | MII_WRITE_;
- smsc95xx_write_reg(dev, MII_ADDR, addr);
+ ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
+ check_warn_goto_done(ret, "Error writing MII_ACCESS");
- if (smsc95xx_phy_wait_not_busy(dev))
- netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx);
+ ret = smsc95xx_phy_wait_not_busy(dev);
+ check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx);
+done:
mutex_unlock(&dev->phy_mutex);
}
@@ -197,9 +211,12 @@ static int smsc95xx_wait_eeprom(struct usbnet *dev)
{
unsigned long start_time = jiffies;
u32 val;
+ int ret;
do {
- smsc95xx_read_reg(dev, E2P_CMD, &val);
+ ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
+ check_warn_return(ret, "Error reading E2P_CMD");
+
if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
break;
udelay(40);
@@ -217,9 +234,11 @@ static int smsc95xx_eeprom_confirm_not_busy(struct usbnet *dev)
{
unsigned long start_time = jiffies;
u32 val;
+ int ret;
do {
- smsc95xx_read_reg(dev, E2P_CMD, &val);
+ ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
+ check_warn_return(ret, "Error reading E2P_CMD");
if (!(val & E2P_CMD_BUSY_))
return 0;
@@ -246,13 +265,15 @@ static int smsc95xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
for (i = 0; i < length; i++) {
val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
- smsc95xx_write_reg(dev, E2P_CMD, val);
+ ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+ check_warn_return(ret, "Error writing E2P_CMD");
ret = smsc95xx_wait_eeprom(dev);
if (ret < 0)
return ret;
- smsc95xx_read_reg(dev, E2P_DATA, &val);
+ ret = smsc95xx_read_reg(dev, E2P_DATA, &val);
+ check_warn_return(ret, "Error reading E2P_DATA");
data[i] = val & 0xFF;
offset++;
@@ -276,7 +297,8 @@ static int smsc95xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
/* Issue write/erase enable command */
val = E2P_CMD_BUSY_ | E2P_CMD_EWEN_;
- smsc95xx_write_reg(dev, E2P_CMD, val);
+ ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+ check_warn_return(ret, "Error writing E2P_CMD");
ret = smsc95xx_wait_eeprom(dev);
if (ret < 0)
@@ -286,11 +308,13 @@ static int smsc95xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
/* Fill data register */
val = data[i];
- smsc95xx_write_reg(dev, E2P_DATA, val);
+ ret = smsc95xx_write_reg(dev, E2P_DATA, val);
+ check_warn_return(ret, "Error writing E2P_DATA");
/* Send "write" command */
val = E2P_CMD_BUSY_ | E2P_CMD_WRITE_ | (offset & E2P_CMD_ADDR_);
- smsc95xx_write_reg(dev, E2P_CMD, val);
+ ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+ check_warn_return(ret, "Error writing E2P_CMD");
ret = smsc95xx_wait_eeprom(dev);
if (ret < 0)
@@ -308,8 +332,7 @@ static void smsc95xx_async_cmd_callback(struct urb *urb)
struct usbnet *dev = usb_context->dev;
int status = urb->status;
- if (status < 0)
- netdev_warn(dev->net, "async callback failed with %d\n", status);
+ check_warn(status, "async callback failed with %d\n", status);
kfree(usb_context);
usb_free_urb(urb);
@@ -415,16 +438,14 @@ static void smsc95xx_set_multicast(struct net_device *netdev)
smsc95xx_write_reg_async(dev, MAC_CR, &pdata->mac_cr);
}
-static void smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
- u16 lcladv, u16 rmtadv)
+static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
+ u16 lcladv, u16 rmtadv)
{
u32 flow, afc_cfg = 0;
int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg);
- if (ret < 0) {
- netdev_warn(dev->net, "error reading AFC_CFG\n");
- return;
- }
+ check_warn_return(ret, "Error reading AFC_CFG");
+
if (duplex == DUPLEX_FULL) {
u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
@@ -448,8 +469,13 @@ static void smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
afc_cfg |= 0xF;
}
- smsc95xx_write_reg(dev, FLOW, flow);
- smsc95xx_write_reg(dev, AFC_CFG, afc_cfg);
+ ret = smsc95xx_write_reg(dev, FLOW, flow);
+ check_warn_return(ret, "Error writing FLOW");
+
+ ret = smsc95xx_write_reg(dev, AFC_CFG, afc_cfg);
+ check_warn_return(ret, "Error writing AFC_CFG");
+
+ return 0;
}
static int smsc95xx_link_reset(struct usbnet *dev)
@@ -460,11 +486,15 @@ static int smsc95xx_link_reset(struct usbnet *dev)
unsigned long flags;
u16 lcladv, rmtadv;
u32 intdata;
+ int ret;
/* clear interrupt status */
- smsc95xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
+ ret = smsc95xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
+ check_warn_return(ret, "Error reading PHY_INT_SRC");
+
intdata = 0xFFFFFFFF;
- smsc95xx_write_reg(dev, INT_STS, intdata);
+ ret = smsc95xx_write_reg(dev, INT_STS, intdata);
+ check_warn_return(ret, "Error writing INT_STS");
mii_check_media(mii, 1, 1);
mii_ethtool_gset(&dev->mii, &ecmd);
@@ -484,7 +514,8 @@ static int smsc95xx_link_reset(struct usbnet *dev)
}
spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
- smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+ ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+ check_warn_return(ret, "Error writing MAC_CR");
smsc95xx_phy_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
@@ -519,10 +550,7 @@ static int smsc95xx_set_csums(struct usbnet *dev)
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
u32 read_buf;
int ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read COE_CR: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read COE_CR: %d\n", ret);
if (pdata->use_tx_csum)
read_buf |= Tx_COE_EN_;
@@ -535,10 +563,7 @@ static int smsc95xx_set_csums(struct usbnet *dev)
read_buf &= ~Rx_COE_EN_;
ret = smsc95xx_write_reg(dev, COE_CR, read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write COE_CR: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write COE_CR: %d\n", ret);
netif_dbg(dev, hw, dev->net, "COE_CR = 0x%08x\n", read_buf);
return 0;
@@ -662,50 +687,53 @@ static int smsc95xx_set_mac_address(struct usbnet *dev)
int ret;
ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write ADDRL: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write ADDRL: %d\n", ret);
ret = smsc95xx_write_reg(dev, ADDRH, addr_hi);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write ADDRH: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write ADDRH: %d\n", ret);
return 0;
}
/* starts the TX path */
-static void smsc95xx_start_tx_path(struct usbnet *dev)
+static int smsc95xx_start_tx_path(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
unsigned long flags;
u32 reg_val;
+ int ret;
/* Enable Tx at MAC */
spin_lock_irqsave(&pdata->mac_cr_lock, flags);
pdata->mac_cr |= MAC_CR_TXEN_;
spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
- smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+ ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+ check_warn_return(ret, "Failed to write MAC_CR: %d\n", ret);
/* Enable Tx at SCSRs */
reg_val = TX_CFG_ON_;
- smsc95xx_write_reg(dev, TX_CFG, reg_val);
+ ret = smsc95xx_write_reg(dev, TX_CFG, reg_val);
+ check_warn_return(ret, "Failed to write TX_CFG: %d\n", ret);
+
+ return 0;
}
/* Starts the Receive path */
-static void smsc95xx_start_rx_path(struct usbnet *dev)
+static int smsc95xx_start_rx_path(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
unsigned long flags;
+ int ret;
spin_lock_irqsave(&pdata->mac_cr_lock, flags);
pdata->mac_cr |= MAC_CR_RXEN_;
spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
- smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+ ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+ check_warn_return(ret, "Failed to write MAC_CR: %d\n", ret);
+
+ return 0;
}
static int smsc95xx_phy_initialize(struct usbnet *dev)
@@ -760,20 +788,13 @@ static int smsc95xx_reset(struct usbnet *dev)
write_buf = HW_CFG_LRST_;
ret = smsc95xx_write_reg(dev, HW_CFG, write_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write HW_CFG_LRST_ bit in HW_CFG register, ret = %d\n",
- ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write HW_CFG: %d\n", ret);
timeout = 0;
do {
msleep(10);
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
timeout++;
} while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
@@ -784,19 +805,13 @@ static int smsc95xx_reset(struct usbnet *dev)
write_buf = PM_CTL_PHY_RST_;
ret = smsc95xx_write_reg(dev, PM_CTRL, write_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write PM_CTRL: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write PM_CTRL: %d\n", ret);
timeout = 0;
do {
msleep(10);
ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read PM_CTRL: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read PM_CTRL: %d\n", ret);
timeout++;
} while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
@@ -815,10 +830,7 @@ static int smsc95xx_reset(struct usbnet *dev)
"MAC Address: %pM\n", dev->net->dev_addr);
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
netif_dbg(dev, ifup, dev->net,
"Read Value from HW_CFG : 0x%08x\n", read_buf);
@@ -826,17 +838,11 @@ static int smsc95xx_reset(struct usbnet *dev)
read_buf |= HW_CFG_BIR_;
ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write HW_CFG_BIR_ bit in HW_CFG register, ret = %d\n",
- ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write HW_CFG: %d\n", ret);
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
+
netif_dbg(dev, ifup, dev->net,
"Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n",
read_buf);
@@ -856,41 +862,29 @@ static int smsc95xx_reset(struct usbnet *dev)
"rx_urb_size=%ld\n", (ulong)dev->rx_urb_size);
ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write BURST_CAP: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write BURST_CAP: %d\n", ret);
ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read BURST_CAP: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read BURST_CAP: %d\n", ret);
+
netif_dbg(dev, ifup, dev->net,
"Read Value from BURST_CAP after writing: 0x%08x\n",
read_buf);
read_buf = DEFAULT_BULK_IN_DELAY;
ret = smsc95xx_write_reg(dev, BULK_IN_DLY, read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "ret = %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write BULK_IN_DLY: %d\n", ret);
ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read BULK_IN_DLY: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read BULK_IN_DLY: %d\n", ret);
+
netif_dbg(dev, ifup, dev->net,
"Read Value from BULK_IN_DLY after writing: 0x%08x\n",
read_buf);
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
+
netif_dbg(dev, ifup, dev->net,
"Read Value from HW_CFG: 0x%08x\n", read_buf);
@@ -903,103 +897,66 @@ static int smsc95xx_reset(struct usbnet *dev)
read_buf |= NET_IP_ALIGN << 9;
ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write HW_CFG register, ret=%d\n",
- ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write HW_CFG: %d\n", ret);
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read HW_CFG: %d\n", ret);
+
netif_dbg(dev, ifup, dev->net,
"Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
write_buf = 0xFFFFFFFF;
ret = smsc95xx_write_reg(dev, INT_STS, write_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write INT_STS register, ret=%d\n",
- ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write INT_STS: %d\n", ret);
ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read ID_REV: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read ID_REG: %d\n", ret);
+
netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf);
/* Configure GPIO pins as LED outputs */
write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
LED_GPIO_CFG_FDX_LED;
ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write LED_GPIO_CFG register, ret=%d\n",
- ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d\n", ret);
/* Init Tx */
write_buf = 0;
ret = smsc95xx_write_reg(dev, FLOW, write_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write FLOW: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write FLOW: %d\n", ret);
read_buf = AFC_CFG_DEFAULT;
ret = smsc95xx_write_reg(dev, AFC_CFG, read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write AFC_CFG: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write AFC_CFG: %d\n", ret);
/* Don't need mac_cr_lock during initialisation */
ret = smsc95xx_read_reg(dev, MAC_CR, &pdata->mac_cr);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read MAC_CR: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read MAC_CR: %d\n", ret);
/* Init Rx */
/* Set Vlan */
write_buf = (u32)ETH_P_8021Q;
ret = smsc95xx_write_reg(dev, VLAN1, write_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write VAN1: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write VLAN1: %d\n", ret);
/* Enable or disable checksum offload engines */
ethtool_op_set_tx_hw_csum(netdev, pdata->use_tx_csum);
ret = smsc95xx_set_csums(dev);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to set csum offload: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to set csum offload: %d\n", ret);
smsc95xx_set_multicast(dev->net);
- if (smsc95xx_phy_initialize(dev) < 0)
- return -EIO;
+ ret = smsc95xx_phy_initialize(dev);
+ check_warn_return(ret, "Failed to init PHY: %d\n", ret);
ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to read INT_EP_CTL: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to read INT_EP_CTL: %d\n", ret);
/* enable PHY interrupts */
read_buf |= INT_EP_CTL_PHY_INT_;
ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
- if (ret < 0) {
- netdev_warn(dev->net, "Failed to write INT_EP_CTL: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "Failed to write INT_EP_CTL: %d\n", ret);
smsc95xx_start_tx_path(dev);
smsc95xx_start_rx_path(dev);
@@ -1028,10 +985,7 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
ret = usbnet_get_endpoints(dev, intf);
- if (ret < 0) {
- netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret);
- return ret;
- }
+ check_warn_return(ret, "usbnet_get_endpoints failed: %d\n", ret);
dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc95xx_priv),
GFP_KERNEL);
--
1.6.6.1
^ permalink raw reply related
* [PATCH 4/6] smsc95xx: sleep before read for lengthy operations
From: Steve Glendinning @ 2010-03-10 18:32 UTC (permalink / raw)
To: netdev
In-Reply-To: <1268245959-13861-4-git-send-email-steve.glendinning@smsc.com>
During init, the device reset is unexpected to complete immediately,
so sleep before testing the condition rather than after it.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
drivers/net/usb/smsc95xx.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index a55dc27..56fe73d 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -768,12 +768,12 @@ static int smsc95xx_reset(struct usbnet *dev)
timeout = 0;
do {
+ msleep(10);
ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
if (ret < 0) {
netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
return ret;
}
- msleep(10);
timeout++;
} while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
@@ -791,12 +791,12 @@ static int smsc95xx_reset(struct usbnet *dev)
timeout = 0;
do {
+ msleep(10);
ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf);
if (ret < 0) {
netdev_warn(dev->net, "Failed to read PM_CTRL: %d\n", ret);
return ret;
}
- msleep(10);
timeout++;
} while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
--
1.6.6.1
^ permalink raw reply related
* [PATCH 3/6] smsc95xx: add constant definition for SMSC USB vendor id
From: Steve Glendinning @ 2010-03-10 18:32 UTC (permalink / raw)
To: netdev
In-Reply-To: <1268245959-13861-3-git-send-email-steve.glendinning@smsc.com>
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
drivers/net/usb/smsc95xx.c | 31 ++++++++++++++++---------------
1 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index a2cb77d..a55dc27 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -45,6 +45,7 @@
#define SMSC95XX_INTERNAL_PHY_ID (1)
#define SMSC95XX_TX_OVERHEAD (8)
#define SMSC95XX_TX_OVERHEAD_CSUM (12)
+#define USB_VENDOR_ID_SMSC (0x0424)
struct smsc95xx_priv {
u32 mac_cr;
@@ -1225,77 +1226,77 @@ static const struct driver_info smsc95xx_info = {
static const struct usb_device_id products[] = {
{
/* SMSC9500 USB Ethernet Device */
- USB_DEVICE(0x0424, 0x9500),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9500),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9505 USB Ethernet Device */
- USB_DEVICE(0x0424, 0x9505),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9505),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500A USB Ethernet Device */
- USB_DEVICE(0x0424, 0x9E00),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9E00),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9505A USB Ethernet Device */
- USB_DEVICE(0x0424, 0x9E01),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9E01),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9512/9514 USB Hub & Ethernet Device */
- USB_DEVICE(0x0424, 0xec00),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0xec00),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500 USB Ethernet Device (SAL10) */
- USB_DEVICE(0x0424, 0x9900),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9900),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9505 USB Ethernet Device (SAL10) */
- USB_DEVICE(0x0424, 0x9901),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9901),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500A USB Ethernet Device (SAL10) */
- USB_DEVICE(0x0424, 0x9902),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9902),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9505A USB Ethernet Device (SAL10) */
- USB_DEVICE(0x0424, 0x9903),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9903),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9512/9514 USB Hub & Ethernet Device (SAL10) */
- USB_DEVICE(0x0424, 0x9904),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9904),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500A USB Ethernet Device (HAL) */
- USB_DEVICE(0x0424, 0x9905),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9905),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9505A USB Ethernet Device (HAL) */
- USB_DEVICE(0x0424, 0x9906),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9906),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500 USB Ethernet Device (Alternate ID) */
- USB_DEVICE(0x0424, 0x9907),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9907),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9500A USB Ethernet Device (Alternate ID) */
- USB_DEVICE(0x0424, 0x9908),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9908),
.driver_info = (unsigned long) &smsc95xx_info,
},
{
/* SMSC9512/9514 USB Hub & Ethernet Device (Alternate ID) */
- USB_DEVICE(0x0424, 0x9909),
+ USB_DEVICE(USB_VENDOR_ID_SMSC, 0x9909),
.driver_info = (unsigned long) &smsc95xx_info,
},
{ }, /* END */
--
1.6.6.1
^ permalink raw reply related
* [PATCH 2/6] smsc95xx: wait for PHY to complete reset during init
From: Steve Glendinning @ 2010-03-10 18:32 UTC (permalink / raw)
To: netdev
In-Reply-To: <1268245959-13861-2-git-send-email-steve.glendinning@smsc.com>
This patch ensures the PHY correctly completes its reset before
setting register values.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
drivers/net/usb/smsc95xx.c | 15 +++++++++++++++
1 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 4db0840..a2cb77d 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -709,6 +709,8 @@ static void smsc95xx_start_rx_path(struct usbnet *dev)
static int smsc95xx_phy_initialize(struct usbnet *dev)
{
+ int bmcr, timeout = 0;
+
/* Initialize MII structure */
dev->mii.dev = dev->net;
dev->mii.mdio_read = smsc95xx_mdio_read;
@@ -717,7 +719,20 @@ static int smsc95xx_phy_initialize(struct usbnet *dev)
dev->mii.reg_num_mask = 0x1f;
dev->mii.phy_id = SMSC95XX_INTERNAL_PHY_ID;
+ /* reset phy and wait for reset to complete */
smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+
+ do {
+ msleep(10);
+ bmcr = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
+ timeout++;
+ } while ((bmcr & MII_BMCR) && (timeout < 100));
+
+ if (timeout >= 100) {
+ netdev_warn(dev->net, "timeout on PHY Reset");
+ return -EIO;
+ }
+
smsc95xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
ADVERTISE_PAUSE_ASYM);
--
1.6.6.1
^ permalink raw reply related
* [PATCH 1/6] smsc95xx: change hard_header_len to include csum offload bytes
From: Steve Glendinning @ 2010-03-10 18:32 UTC (permalink / raw)
To: netdev
In-Reply-To: <1268245959-13861-1-git-send-email-steve.glendinning@smsc.com>
If tx checksum offload is enabled on this device it requires 12
bytes of headroom instead of 8. This patch sets hard_header_len
to the larger of the two to help avoid skb_copy_expand.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
drivers/net/usb/smsc95xx.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index df9179a..4db0840 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1037,7 +1037,7 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
dev->net->netdev_ops = &smsc95xx_netdev_ops;
dev->net->ethtool_ops = &smsc95xx_ethtool_ops;
dev->net->flags |= IFF_MULTICAST;
- dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD;
+ dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM;
return 0;
}
--
1.6.6.1
^ permalink raw reply related
* [PATCH 0/6] smsc95xx: minor fixes and tidy-ups
From: Steve Glendinning @ 2010-03-10 18:32 UTC (permalink / raw)
To: netdev
This patchset contains minor bugfixes and tidy-ups to the smsc95xx
driver. Please consider for net-next.
Steve Glendinning (6):
smsc95xx: change hard_header_len to include csum offload bytes
smsc95xx: wait for PHY to complete reset during init
smsc95xx: add constant definition for SMSC USB vendor id
smsc95xx: sleep before read for lengthy operations
smsc95xx: check return code from control messages
smsc95xx: remove unnecessary variables
drivers/net/usb/smsc95xx.c | 379 ++++++++++++++++++++------------------------
drivers/net/usb/smsc95xx.h | 1 +
2 files changed, 170 insertions(+), 210 deletions(-)
^ permalink raw reply
* [PATCH 4/4] smsc75xx: add TX segmentation offload support
From: Steve Glendinning @ 2010-03-10 18:26 UTC (permalink / raw)
To: netdev
In-Reply-To: <1268245617-13698-4-git-send-email-steve.glendinning@smsc.com>
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
drivers/net/usb/smsc75xx.c | 30 +++++++++++++++++++++++++++---
1 files changed, 27 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 8841643..300e3e7 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -42,6 +42,7 @@
#define EEPROM_MAC_OFFSET (0x01)
#define DEFAULT_TX_CSUM_ENABLE (true)
#define DEFAULT_RX_CSUM_ENABLE (true)
+#define DEFAULT_TSO_ENABLE (true)
#define SMSC75XX_INTERNAL_PHY_ID (1)
#define SMSC75XX_TX_OVERHEAD (8)
#define MAX_RX_FIFO_SIZE (20 * 1024)
@@ -615,6 +616,16 @@ static int smsc75xx_ethtool_set_rx_csum(struct net_device *netdev, u32 val)
return smsc75xx_set_rx_csum_offload(dev);
}
+static int smsc75xx_ethtool_set_tso(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
+ else
+ netdev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+
+ return 0;
+}
+
static const struct ethtool_ops smsc75xx_ethtool_ops = {
.get_link = usbnet_get_link,
.nway_reset = usbnet_nway_reset,
@@ -630,6 +641,8 @@ static const struct ethtool_ops smsc75xx_ethtool_ops = {
.set_tx_csum = ethtool_op_set_tx_hw_csum,
.get_rx_csum = smsc75xx_ethtool_get_rx_csum,
.set_rx_csum = smsc75xx_ethtool_set_rx_csum,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = smsc75xx_ethtool_set_tso,
};
static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -950,6 +963,8 @@ static int smsc75xx_reset(struct usbnet *dev)
ret = smsc75xx_set_rx_csum_offload(dev);
check_warn_return(ret, "Failed to set rx csum offload: %d", ret);
+ smsc75xx_ethtool_set_tso(dev->net, DEFAULT_TSO_ENABLE);
+
smsc75xx_set_multicast(dev->net);
ret = smsc75xx_phy_initialize(dev);
@@ -1051,6 +1066,9 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE;
+ /* We have to advertise SG otherwise TSO cannot be enabled */
+ dev->net->features |= NETIF_F_SG;
+
/* Init all registers */
ret = smsc75xx_reset(dev);
@@ -1180,8 +1198,7 @@ static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
{
u32 tx_cmd_a, tx_cmd_b;
- /* We do not advertise SG, so skbs should be already linearized */
- BUG_ON(skb_shinfo(skb)->nr_frags);
+ skb_linearize(skb);
if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) {
struct sk_buff *skb2 =
@@ -1197,7 +1214,14 @@ static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
if (skb->ip_summed == CHECKSUM_PARTIAL)
tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE;
- tx_cmd_b = 0;
+ if (skb_is_gso(skb)) {
+ u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN);
+ tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS;
+
+ tx_cmd_a |= TX_CMD_A_LSO;
+ } else {
+ tx_cmd_b = 0;
+ }
skb_push(skb, 4);
cpu_to_le32s(&tx_cmd_b);
--
1.6.6.1
^ permalink raw reply related
* [PATCH 3/4] smsc75xx: add TX checksum offload
From: Steve Glendinning @ 2010-03-10 18:26 UTC (permalink / raw)
To: netdev
In-Reply-To: <1268245617-13698-3-git-send-email-steve.glendinning@smsc.com>
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
drivers/net/usb/smsc75xx.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 73f6d78..8841643 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -40,6 +40,7 @@
#define MAX_SINGLE_PACKET_SIZE (9000)
#define LAN75XX_EEPROM_MAGIC (0x7500)
#define EEPROM_MAC_OFFSET (0x01)
+#define DEFAULT_TX_CSUM_ENABLE (true)
#define DEFAULT_RX_CSUM_ENABLE (true)
#define SMSC75XX_INTERNAL_PHY_ID (1)
#define SMSC75XX_TX_OVERHEAD (8)
@@ -625,6 +626,8 @@ static const struct ethtool_ops smsc75xx_ethtool_ops = {
.get_eeprom_len = smsc75xx_ethtool_get_eeprom_len,
.get_eeprom = smsc75xx_ethtool_get_eeprom,
.set_eeprom = smsc75xx_ethtool_set_eeprom,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_hw_csum,
.get_rx_csum = smsc75xx_ethtool_get_rx_csum,
.set_rx_csum = smsc75xx_ethtool_set_rx_csum,
};
@@ -943,6 +946,7 @@ static int smsc75xx_reset(struct usbnet *dev)
netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
/* Enable or disable checksum offload engines */
+ ethtool_op_set_tx_hw_csum(dev->net, DEFAULT_TX_CSUM_ENABLE);
ret = smsc75xx_set_rx_csum_offload(dev);
check_warn_return(ret, "Failed to set rx csum offload: %d", ret);
@@ -1190,6 +1194,9 @@ static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS;
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE;
+
tx_cmd_b = 0;
skb_push(skb, 4);
--
1.6.6.1
^ permalink raw reply related
* [PATCH 2/4] smsc75xx: add RX checksum offload
From: Steve Glendinning @ 2010-03-10 18:26 UTC (permalink / raw)
To: netdev
In-Reply-To: <1268245617-13698-2-git-send-email-steve.glendinning@smsc.com>
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
drivers/net/usb/smsc75xx.c | 77 ++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 75 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index ffb8d25..73f6d78 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -40,6 +40,7 @@
#define MAX_SINGLE_PACKET_SIZE (9000)
#define LAN75XX_EEPROM_MAGIC (0x7500)
#define EEPROM_MAC_OFFSET (0x01)
+#define DEFAULT_RX_CSUM_ENABLE (true)
#define SMSC75XX_INTERNAL_PHY_ID (1)
#define SMSC75XX_TX_OVERHEAD (8)
#define MAX_RX_FIFO_SIZE (20 * 1024)
@@ -61,6 +62,7 @@ struct smsc75xx_priv {
struct usbnet *dev;
u32 rfe_ctl;
u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
+ bool use_rx_csum;
struct mutex dataport_mutex;
spinlock_t rfe_ctl_lock;
struct work_struct set_multicast;
@@ -543,6 +545,28 @@ static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
"unexpected interrupt, intdata=0x%08X", intdata);
}
+/* Enable or disable Rx checksum offload engine */
+static int smsc75xx_set_rx_csum_offload(struct usbnet *dev)
+{
+ struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+ if (pdata->use_rx_csum)
+ pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
+ else
+ pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
+
+ spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+
+ ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+ check_warn_return(ret, "Error writing RFE_CTL");
+
+ return 0;
+}
+
static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
{
return MAX_EEPROM_SIZE;
@@ -572,6 +596,24 @@ static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
}
+static u32 smsc75xx_ethtool_get_rx_csum(struct net_device *netdev)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+
+ return pdata->use_rx_csum;
+}
+
+static int smsc75xx_ethtool_set_rx_csum(struct net_device *netdev, u32 val)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+
+ pdata->use_rx_csum = !!val;
+
+ return smsc75xx_set_rx_csum_offload(dev);
+}
+
static const struct ethtool_ops smsc75xx_ethtool_ops = {
.get_link = usbnet_get_link,
.nway_reset = usbnet_nway_reset,
@@ -583,6 +625,8 @@ static const struct ethtool_ops smsc75xx_ethtool_ops = {
.get_eeprom_len = smsc75xx_ethtool_get_eeprom_len,
.get_eeprom = smsc75xx_ethtool_get_eeprom,
.set_eeprom = smsc75xx_ethtool_set_eeprom,
+ .get_rx_csum = smsc75xx_ethtool_get_rx_csum,
+ .set_rx_csum = smsc75xx_ethtool_set_rx_csum,
};
static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -898,6 +942,10 @@ static int smsc75xx_reset(struct usbnet *dev)
netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
+ /* Enable or disable checksum offload engines */
+ ret = smsc75xx_set_rx_csum_offload(dev);
+ check_warn_return(ret, "Failed to set rx csum offload: %d", ret);
+
smsc75xx_set_multicast(dev->net);
ret = smsc75xx_phy_initialize(dev);
@@ -997,6 +1045,8 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
+ pdata->use_rx_csum = DEFAULT_RX_CSUM_ENABLE;
+
/* Init all registers */
ret = smsc75xx_reset(dev);
@@ -1018,8 +1068,21 @@ static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
}
}
+static void smsc75xx_rx_csum_offload(struct sk_buff *skb, u32 rx_cmd_a,
+ u32 rx_cmd_b)
+{
+ if (unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
+ skb->ip_summed = CHECKSUM_NONE;
+ } else {
+ skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
+}
+
static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
+ struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+
while (skb->len > 0) {
u32 rx_cmd_a, rx_cmd_b, align_count, size;
struct sk_buff *ax_skb;
@@ -1059,7 +1122,12 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
/* last frame in this batch */
if (skb->len == size) {
- skb->ip_summed = CHECKSUM_NONE;
+ if (pdata->use_rx_csum)
+ smsc75xx_rx_csum_offload(skb, rx_cmd_a,
+ rx_cmd_b);
+ else
+ skb->ip_summed = CHECKSUM_NONE;
+
skb_trim(skb, skb->len - 4); /* remove fcs */
skb->truesize = size + sizeof(struct sk_buff);
@@ -1076,7 +1144,12 @@ static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
ax_skb->data = packet;
skb_set_tail_pointer(ax_skb, size);
- ax_skb->ip_summed = CHECKSUM_NONE;
+ if (pdata->use_rx_csum)
+ smsc75xx_rx_csum_offload(ax_skb, rx_cmd_a,
+ rx_cmd_b);
+ else
+ ax_skb->ip_summed = CHECKSUM_NONE;
+
skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
ax_skb->truesize = size + sizeof(struct sk_buff);
--
1.6.6.1
^ permalink raw reply related
* [PATCH 1/4] smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver
From: Steve Glendinning @ 2010-03-10 18:26 UTC (permalink / raw)
To: netdev
In-Reply-To: <1268245617-13698-1-git-send-email-steve.glendinning@smsc.com>
This patch adds a driver for SMSC's LAN7500 family of USB 2.0
to gigabit ethernet adapters. It's loosely based on the smsc95xx
driver but the device registers for LAN7500 are completely different.
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
---
drivers/net/usb/Kconfig | 8 +
drivers/net/usb/Makefile | 1 +
drivers/net/usb/smsc75xx.c | 1184 ++++++++++++++++++++++++++++++++++++++++++++
drivers/net/usb/smsc75xx.h | 421 ++++++++++++++++
4 files changed, 1614 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/usb/smsc75xx.c
create mode 100644 drivers/net/usb/smsc75xx.h
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 32d9356..ba56ce4 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -204,6 +204,14 @@ config USB_NET_DM9601
This option adds support for Davicom DM9601 based USB 1.1
10/100 Ethernet adapters.
+config USB_NET_SMSC75XX
+ tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
+ depends on USB_USBNET
+ select CRC32
+ help
+ This option adds support for SMSC LAN95XX based USB 2.0
+ Gigabit Ethernet adapters.
+
config USB_NET_SMSC95XX
tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices"
depends on USB_USBNET
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index e17afb7..82ea629 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_USB_NET_AX8817X) += asix.o
obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
+obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o
obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
obj-$(CONFIG_USB_NET_NET1080) += net1080.o
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
new file mode 100644
index 0000000..ffb8d25
--- /dev/null
+++ b/drivers/net/usb/smsc75xx.c
@@ -0,0 +1,1184 @@
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2010 SMSC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include "smsc75xx.h"
+
+#define SMSC_CHIPNAME "smsc75xx"
+#define SMSC_DRIVER_VERSION "1.0.0"
+#define HS_USB_PKT_SIZE (512)
+#define FS_USB_PKT_SIZE (64)
+#define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE)
+#define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE)
+#define DEFAULT_BULK_IN_DELAY (0x00002000)
+#define MAX_SINGLE_PACKET_SIZE (9000)
+#define LAN75XX_EEPROM_MAGIC (0x7500)
+#define EEPROM_MAC_OFFSET (0x01)
+#define SMSC75XX_INTERNAL_PHY_ID (1)
+#define SMSC75XX_TX_OVERHEAD (8)
+#define MAX_RX_FIFO_SIZE (20 * 1024)
+#define MAX_TX_FIFO_SIZE (12 * 1024)
+#define USB_VENDOR_ID_SMSC (0x0424)
+#define USB_PRODUCT_ID_LAN7500 (0x7500)
+#define USB_PRODUCT_ID_LAN7505 (0x7505)
+
+#define check_warn(ret, fmt, args...) \
+ ({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
+
+#define check_warn_return(ret, fmt, args...) \
+ ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); return ret; } })
+
+#define check_warn_goto_done(ret, fmt, args...) \
+ ({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); goto done; } })
+
+struct smsc75xx_priv {
+ struct usbnet *dev;
+ u32 rfe_ctl;
+ u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
+ struct mutex dataport_mutex;
+ spinlock_t rfe_ctl_lock;
+ struct work_struct set_multicast;
+};
+
+struct usb_context {
+ struct usb_ctrlrequest req;
+ struct usbnet *dev;
+};
+
+static int turbo_mode = true;
+module_param(turbo_mode, bool, 0644);
+MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+
+static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
+ u32 *data)
+{
+ u32 *buf = kmalloc(4, GFP_KERNEL);
+ int ret;
+
+ BUG_ON(!dev);
+
+ if (!buf)
+ return -ENOMEM;
+
+ ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+ USB_VENDOR_REQUEST_READ_REGISTER,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 00, index, buf, 4, USB_CTRL_GET_TIMEOUT);
+
+ if (unlikely(ret < 0))
+ netdev_warn(dev->net,
+ "Failed to read register index 0x%08x", index);
+
+ le32_to_cpus(buf);
+ *data = *buf;
+ kfree(buf);
+
+ return ret;
+}
+
+static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
+ u32 data)
+{
+ u32 *buf = kmalloc(4, GFP_KERNEL);
+ int ret;
+
+ BUG_ON(!dev);
+
+ if (!buf)
+ return -ENOMEM;
+
+ *buf = data;
+ cpu_to_le32s(buf);
+
+ ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+ USB_VENDOR_REQUEST_WRITE_REGISTER,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 00, index, buf, 4, USB_CTRL_SET_TIMEOUT);
+
+ if (unlikely(ret < 0))
+ netdev_warn(dev->net,
+ "Failed to write register index 0x%08x", index);
+
+ kfree(buf);
+
+ return ret;
+}
+
+/* Loop until the read is completed with timeout
+ * called with phy_mutex held */
+static int smsc75xx_phy_wait_not_busy(struct usbnet *dev)
+{
+ unsigned long start_time = jiffies;
+ u32 val;
+ int ret;
+
+ do {
+ ret = smsc75xx_read_reg(dev, MII_ACCESS, &val);
+ check_warn_return(ret, "Error reading MII_ACCESS");
+
+ if (!(val & MII_ACCESS_BUSY))
+ return 0;
+ } while (!time_after(jiffies, start_time + HZ));
+
+ return -EIO;
+}
+
+static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u32 val, addr;
+ int ret;
+
+ mutex_lock(&dev->phy_mutex);
+
+ /* confirm MII not busy */
+ ret = smsc75xx_phy_wait_not_busy(dev);
+ check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read");
+
+ /* set the address, index & direction (read from PHY) */
+ phy_id &= dev->mii.phy_id_mask;
+ idx &= dev->mii.reg_num_mask;
+ addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
+ | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
+ | MII_ACCESS_READ;
+ ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
+ check_warn_goto_done(ret, "Error writing MII_ACCESS");
+
+ ret = smsc75xx_phy_wait_not_busy(dev);
+ check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx);
+
+ ret = smsc75xx_read_reg(dev, MII_DATA, &val);
+ check_warn_goto_done(ret, "Error reading MII_DATA");
+
+ ret = (u16)(val & 0xFFFF);
+
+done:
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
+}
+
+static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
+ int regval)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u32 val, addr;
+ int ret;
+
+ mutex_lock(&dev->phy_mutex);
+
+ /* confirm MII not busy */
+ ret = smsc75xx_phy_wait_not_busy(dev);
+ check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write");
+
+ val = regval;
+ ret = smsc75xx_write_reg(dev, MII_DATA, val);
+ check_warn_goto_done(ret, "Error writing MII_DATA");
+
+ /* set the address, index & direction (write to PHY) */
+ phy_id &= dev->mii.phy_id_mask;
+ idx &= dev->mii.reg_num_mask;
+ addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
+ | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
+ | MII_ACCESS_WRITE;
+ ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
+ check_warn_goto_done(ret, "Error writing MII_ACCESS");
+
+ ret = smsc75xx_phy_wait_not_busy(dev);
+ check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx);
+
+done:
+ mutex_unlock(&dev->phy_mutex);
+}
+
+static int smsc75xx_wait_eeprom(struct usbnet *dev)
+{
+ unsigned long start_time = jiffies;
+ u32 val;
+ int ret;
+
+ do {
+ ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
+ check_warn_return(ret, "Error reading E2P_CMD");
+
+ if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT))
+ break;
+ udelay(40);
+ } while (!time_after(jiffies, start_time + HZ));
+
+ if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) {
+ netdev_warn(dev->net, "EEPROM read operation timeout");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev)
+{
+ unsigned long start_time = jiffies;
+ u32 val;
+ int ret;
+
+ do {
+ ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
+ check_warn_return(ret, "Error reading E2P_CMD");
+
+ if (!(val & E2P_CMD_BUSY))
+ return 0;
+
+ udelay(40);
+ } while (!time_after(jiffies, start_time + HZ));
+
+ netdev_warn(dev->net, "EEPROM is busy");
+ return -EIO;
+}
+
+static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
+ u8 *data)
+{
+ u32 val;
+ int i, ret;
+
+ BUG_ON(!dev);
+ BUG_ON(!data);
+
+ ret = smsc75xx_eeprom_confirm_not_busy(dev);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < length; i++) {
+ val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR);
+ ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+ check_warn_return(ret, "Error writing E2P_CMD");
+
+ ret = smsc75xx_wait_eeprom(dev);
+ if (ret < 0)
+ return ret;
+
+ ret = smsc75xx_read_reg(dev, E2P_DATA, &val);
+ check_warn_return(ret, "Error reading E2P_DATA");
+
+ data[i] = val & 0xFF;
+ offset++;
+ }
+
+ return 0;
+}
+
+static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
+ u8 *data)
+{
+ u32 val;
+ int i, ret;
+
+ BUG_ON(!dev);
+ BUG_ON(!data);
+
+ ret = smsc75xx_eeprom_confirm_not_busy(dev);
+ if (ret)
+ return ret;
+
+ /* Issue write/erase enable command */
+ val = E2P_CMD_BUSY | E2P_CMD_EWEN;
+ ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+ check_warn_return(ret, "Error writing E2P_CMD");
+
+ ret = smsc75xx_wait_eeprom(dev);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < length; i++) {
+
+ /* Fill data register */
+ val = data[i];
+ ret = smsc75xx_write_reg(dev, E2P_DATA, val);
+ check_warn_return(ret, "Error writing E2P_DATA");
+
+ /* Send "write" command */
+ val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR);
+ ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+ check_warn_return(ret, "Error writing E2P_CMD");
+
+ ret = smsc75xx_wait_eeprom(dev);
+ if (ret < 0)
+ return ret;
+
+ offset++;
+ }
+
+ return 0;
+}
+
+static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev)
+{
+ int i, ret;
+
+ for (i = 0; i < 100; i++) {
+ u32 dp_sel;
+ ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
+ check_warn_return(ret, "Error reading DP_SEL");
+
+ if (dp_sel & DP_SEL_DPRDY)
+ return 0;
+
+ udelay(40);
+ }
+
+ netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out");
+
+ return -EIO;
+}
+
+static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr,
+ u32 length, u32 *buf)
+{
+ struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+ u32 dp_sel;
+ int i, ret;
+
+ mutex_lock(&pdata->dataport_mutex);
+
+ ret = smsc75xx_dataport_wait_not_busy(dev);
+ check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry");
+
+ ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
+ check_warn_goto_done(ret, "Error reading DP_SEL");
+
+ dp_sel &= ~DP_SEL_RSEL;
+ dp_sel |= ram_select;
+ ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel);
+ check_warn_goto_done(ret, "Error writing DP_SEL");
+
+ for (i = 0; i < length; i++) {
+ ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i);
+ check_warn_goto_done(ret, "Error writing DP_ADDR");
+
+ ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]);
+ check_warn_goto_done(ret, "Error writing DP_DATA");
+
+ ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE);
+ check_warn_goto_done(ret, "Error writing DP_CMD");
+
+ ret = smsc75xx_dataport_wait_not_busy(dev);
+ check_warn_goto_done(ret, "smsc75xx_dataport_write timeout");
+ }
+
+done:
+ mutex_unlock(&pdata->dataport_mutex);
+ return ret;
+}
+
+/* returns hash bit number for given MAC address */
+static u32 smsc75xx_hash(char addr[ETH_ALEN])
+{
+ return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff;
+}
+
+static void smsc75xx_deferred_multicast_write(struct work_struct *param)
+{
+ struct smsc75xx_priv *pdata =
+ container_of(param, struct smsc75xx_priv, set_multicast);
+ struct usbnet *dev = pdata->dev;
+ int ret;
+
+ netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x",
+ pdata->rfe_ctl);
+
+ smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN,
+ DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table);
+
+ ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+ check_warn(ret, "Error writing RFE_CRL");
+}
+
+static void smsc75xx_set_multicast(struct net_device *netdev)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+ pdata->rfe_ctl &=
+ ~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF);
+ pdata->rfe_ctl |= RFE_CTL_AB;
+
+ for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++)
+ pdata->multicast_hash_table[i] = 0;
+
+ if (dev->net->flags & IFF_PROMISC) {
+ netif_dbg(dev, drv, dev->net, "promiscuous mode enabled");
+ pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU;
+ } else if (dev->net->flags & IFF_ALLMULTI) {
+ netif_dbg(dev, drv, dev->net, "receive all multicast enabled");
+ pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF;
+ } else if (!netdev_mc_empty(dev->net)) {
+ struct dev_mc_list *mc_list;
+
+ netif_dbg(dev, drv, dev->net, "receive multicast hash filter");
+
+ pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF;
+
+ netdev_for_each_mc_addr(mc_list, netdev) {
+ u32 bitnum = smsc75xx_hash(mc_list->dmi_addr);
+ pdata->multicast_hash_table[bitnum / 32] |=
+ (1 << (bitnum % 32));
+ }
+ } else {
+ netif_dbg(dev, drv, dev->net, "receive own packets only");
+ pdata->rfe_ctl |= RFE_CTL_DPF;
+ }
+
+ spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+
+ /* defer register writes to a sleepable context */
+ schedule_work(&pdata->set_multicast);
+}
+
+static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
+ u16 lcladv, u16 rmtadv)
+{
+ u32 flow = 0, fct_flow = 0;
+ int ret;
+
+ if (duplex == DUPLEX_FULL) {
+ u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+
+ if (cap & FLOW_CTRL_TX) {
+ flow = (FLOW_TX_FCEN | 0xFFFF);
+ /* set fct_flow thresholds to 20% and 80% */
+ fct_flow = (8 << 8) | 32;
+ }
+
+ if (cap & FLOW_CTRL_RX)
+ flow |= FLOW_RX_FCEN;
+
+ netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s",
+ (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
+ (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
+ } else {
+ netif_dbg(dev, link, dev->net, "half duplex");
+ }
+
+ ret = smsc75xx_write_reg(dev, FLOW, flow);
+ check_warn_return(ret, "Error writing FLOW");
+
+ ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow);
+ check_warn_return(ret, "Error writing FCT_FLOW");
+
+ return 0;
+}
+
+static int smsc75xx_link_reset(struct usbnet *dev)
+{
+ struct mii_if_info *mii = &dev->mii;
+ struct ethtool_cmd ecmd;
+ u16 lcladv, rmtadv;
+ int ret;
+
+ /* clear interrupt status */
+ ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
+ check_warn_return(ret, "Error reading PHY_INT_SRC");
+
+ ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
+ check_warn_return(ret, "Error writing INT_STS");
+
+ mii_check_media(mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+ lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
+ rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
+
+ netif_dbg(dev, link, dev->net, "speed: %d duplex: %d lcladv: %04x"
+ " rmtadv: %04x", ecmd.speed, ecmd.duplex, lcladv, rmtadv);
+
+ return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
+}
+
+static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
+{
+ u32 intdata;
+
+ if (urb->actual_length != 4) {
+ netdev_warn(dev->net,
+ "unexpected urb length %d", urb->actual_length);
+ return;
+ }
+
+ memcpy(&intdata, urb->transfer_buffer, 4);
+ le32_to_cpus(&intdata);
+
+ netif_dbg(dev, link, dev->net, "intdata: 0x%08X", intdata);
+
+ if (intdata & INT_ENP_PHY_INT)
+ usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+ else
+ netdev_warn(dev->net,
+ "unexpected interrupt, intdata=0x%08X", intdata);
+}
+
+static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
+{
+ return MAX_EEPROM_SIZE;
+}
+
+static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+
+ ee->magic = LAN75XX_EEPROM_MAGIC;
+
+ return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+
+ if (ee->magic != LAN75XX_EEPROM_MAGIC) {
+ netdev_warn(dev->net,
+ "EEPROM: magic value mismatch: 0x%x", ee->magic);
+ return -EINVAL;
+ }
+
+ return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static const struct ethtool_ops smsc75xx_ethtool_ops = {
+ .get_link = usbnet_get_link,
+ .nway_reset = usbnet_nway_reset,
+ .get_drvinfo = usbnet_get_drvinfo,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .get_eeprom_len = smsc75xx_ethtool_get_eeprom_len,
+ .get_eeprom = smsc75xx_ethtool_get_eeprom,
+ .set_eeprom = smsc75xx_ethtool_set_eeprom,
+};
+
+static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+
+ if (!netif_running(netdev))
+ return -EINVAL;
+
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static void smsc75xx_init_mac_address(struct usbnet *dev)
+{
+ /* try reading mac address from EEPROM */
+ if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
+ dev->net->dev_addr) == 0) {
+ if (is_valid_ether_addr(dev->net->dev_addr)) {
+ /* eeprom values are valid so use them */
+ netif_dbg(dev, ifup, dev->net,
+ "MAC address read from EEPROM");
+ return;
+ }
+ }
+
+ /* no eeprom, or eeprom values are invalid. generate random MAC */
+ random_ether_addr(dev->net->dev_addr);
+ netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr");
+}
+
+static int smsc75xx_set_mac_address(struct usbnet *dev)
+{
+ u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
+ dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
+ u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
+
+ int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi);
+ check_warn_return(ret, "Failed to write RX_ADDRH: %d", ret);
+
+ ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo);
+ check_warn_return(ret, "Failed to write RX_ADDRL: %d", ret);
+
+ addr_hi |= ADDR_FILTX_FB_VALID;
+ ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi);
+ check_warn_return(ret, "Failed to write ADDR_FILTX: %d", ret);
+
+ ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo);
+ check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d", ret);
+
+ return 0;
+}
+
+static int smsc75xx_phy_initialize(struct usbnet *dev)
+{
+ int bmcr, timeout = 0;
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = smsc75xx_mdio_read;
+ dev->mii.mdio_write = smsc75xx_mdio_write;
+ dev->mii.phy_id_mask = 0x1f;
+ dev->mii.reg_num_mask = 0x1f;
+ dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
+
+ /* reset phy and wait for reset to complete */
+ smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+
+ do {
+ msleep(10);
+ bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
+ check_warn_return(bmcr, "Error reading MII_BMCR");
+ timeout++;
+ } while ((bmcr & MII_BMCR) && (timeout < 100));
+
+ if (timeout >= 100) {
+ netdev_warn(dev->net, "timeout on PHY Reset");
+ return -EIO;
+ }
+
+ smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+
+ /* read to clear */
+ smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
+ check_warn_return(bmcr, "Error reading PHY_INT_SRC");
+
+ smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
+ PHY_INT_MASK_DEFAULT);
+ mii_nway_restart(&dev->mii);
+
+ netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
+ return 0;
+}
+
+static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size)
+{
+ int ret = 0;
+ u32 buf;
+ bool rxenabled;
+
+ ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
+ check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
+
+ rxenabled = ((buf & MAC_RX_RXEN) != 0);
+
+ if (rxenabled) {
+ buf &= ~MAC_RX_RXEN;
+ ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+ check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+ }
+
+ /* add 4 to size for FCS */
+ buf &= ~MAC_RX_MAX_SIZE;
+ buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE);
+
+ ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+ check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+
+ if (rxenabled) {
+ buf |= MAC_RX_RXEN;
+ ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+ check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+ }
+
+ return 0;
+}
+
+static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+
+ int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu);
+ check_warn_return(ret, "Failed to set mac rx frame length");
+
+ return usbnet_change_mtu(netdev, new_mtu);
+}
+
+static int smsc75xx_reset(struct usbnet *dev)
+{
+ struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+ u32 buf;
+ int ret = 0, timeout;
+
+ netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset");
+
+ ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+ check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+ buf |= HW_CFG_LRST;
+
+ ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+ check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+
+ timeout = 0;
+ do {
+ msleep(10);
+ ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+ check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+ timeout++;
+ } while ((buf & HW_CFG_LRST) && (timeout < 100));
+
+ if (timeout >= 100) {
+ netdev_warn(dev->net, "timeout on completion of Lite Reset");
+ return -EIO;
+ }
+
+ netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY");
+
+ ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+ check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
+
+ buf |= PMT_CTL_PHY_RST;
+
+ ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
+ check_warn_return(ret, "Failed to write PMT_CTL: %d", ret);
+
+ timeout = 0;
+ do {
+ msleep(10);
+ ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+ check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
+ timeout++;
+ } while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
+
+ if (timeout >= 100) {
+ netdev_warn(dev->net, "timeout waiting for PHY Reset");
+ return -EIO;
+ }
+
+ netif_dbg(dev, ifup, dev->net, "PHY reset complete");
+
+ smsc75xx_init_mac_address(dev);
+
+ ret = smsc75xx_set_mac_address(dev);
+ check_warn_return(ret, "Failed to set mac address");
+
+ netif_dbg(dev, ifup, dev->net, "MAC Address: %pM", dev->net->dev_addr);
+
+ ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+ check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x", buf);
+
+ buf |= HW_CFG_BIR;
+
+ ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+ check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+
+ ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+ check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after "
+ "writing HW_CFG_BIR: 0x%08x", buf);
+
+ if (!turbo_mode) {
+ buf = 0;
+ dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
+ } else if (dev->udev->speed == USB_SPEED_HIGH) {
+ buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
+ dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
+ } else {
+ buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
+ dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
+ }
+
+ netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld",
+ (ulong)dev->rx_urb_size);
+
+ ret = smsc75xx_write_reg(dev, BURST_CAP, buf);
+ check_warn_return(ret, "Failed to write BURST_CAP: %d", ret);
+
+ ret = smsc75xx_read_reg(dev, BURST_CAP, &buf);
+ check_warn_return(ret, "Failed to read BURST_CAP: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net,
+ "Read Value from BURST_CAP after writing: 0x%08x", buf);
+
+ ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
+ check_warn_return(ret, "Failed to write BULK_IN_DLY: %d", ret);
+
+ ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf);
+ check_warn_return(ret, "Failed to read BULK_IN_DLY: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net,
+ "Read Value from BULK_IN_DLY after writing: 0x%08x", buf);
+
+ if (turbo_mode) {
+ ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+ check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
+
+ buf |= (HW_CFG_MEF | HW_CFG_BCE);
+
+ ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+ check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
+
+ ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+ check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
+ }
+
+ /* set FIFO sizes */
+ buf = (MAX_RX_FIFO_SIZE - 512) / 512;
+ ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf);
+ check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x", buf);
+
+ buf = (MAX_TX_FIFO_SIZE - 512) / 512;
+ ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf);
+ check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x", buf);
+
+ ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
+ check_warn_return(ret, "Failed to write INT_STS: %d", ret);
+
+ ret = smsc75xx_read_reg(dev, ID_REV, &buf);
+ check_warn_return(ret, "Failed to read ID_REV: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf);
+
+ /* Configure GPIO pins as LED outputs */
+ ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
+ check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret);
+
+ buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
+ buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
+
+ ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
+ check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret);
+
+ ret = smsc75xx_write_reg(dev, FLOW, 0);
+ check_warn_return(ret, "Failed to write FLOW: %d", ret);
+
+ ret = smsc75xx_write_reg(dev, FCT_FLOW, 0);
+ check_warn_return(ret, "Failed to write FCT_FLOW: %d", ret);
+
+ /* Don't need rfe_ctl_lock during initialisation */
+ ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
+ check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
+
+ pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF;
+
+ ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+ check_warn_return(ret, "Failed to write RFE_CTL: %d", ret);
+
+ ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
+ check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
+
+ smsc75xx_set_multicast(dev->net);
+
+ ret = smsc75xx_phy_initialize(dev);
+ check_warn_return(ret, "Failed to initialize PHY: %d", ret);
+
+ ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf);
+ check_warn_return(ret, "Failed to read INT_EP_CTL: %d", ret);
+
+ /* enable PHY interrupts */
+ buf |= INT_ENP_PHY_INT;
+
+ ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
+ check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret);
+
+ ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
+ check_warn_return(ret, "Failed to read MAC_TX: %d", ret);
+
+ buf |= MAC_TX_TXEN;
+
+ ret = smsc75xx_write_reg(dev, MAC_TX, buf);
+ check_warn_return(ret, "Failed to write MAC_TX: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x", buf);
+
+ ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf);
+ check_warn_return(ret, "Failed to read FCT_TX_CTL: %d", ret);
+
+ buf |= FCT_TX_CTL_EN;
+
+ ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf);
+ check_warn_return(ret, "Failed to write FCT_TX_CTL: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf);
+
+ ret = smsc75xx_set_rx_max_frame_length(dev, 1514);
+ check_warn_return(ret, "Failed to set max rx frame length");
+
+ ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
+ check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
+
+ buf |= MAC_RX_RXEN;
+
+ ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+ check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x", buf);
+
+ ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf);
+ check_warn_return(ret, "Failed to read FCT_RX_CTL: %d", ret);
+
+ buf |= FCT_RX_CTL_EN;
+
+ ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf);
+ check_warn_return(ret, "Failed to write FCT_RX_CTL: %d", ret);
+
+ netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x", buf);
+
+ netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0");
+ return 0;
+}
+
+static const struct net_device_ops smsc75xx_netdev_ops = {
+ .ndo_open = usbnet_open,
+ .ndo_stop = usbnet_stop,
+ .ndo_start_xmit = usbnet_start_xmit,
+ .ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_change_mtu = smsc75xx_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = smsc75xx_ioctl,
+ .ndo_set_multicast_list = smsc75xx_set_multicast,
+};
+
+static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct smsc75xx_priv *pdata = NULL;
+ int ret;
+
+ printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
+
+ ret = usbnet_get_endpoints(dev, intf);
+ check_warn_return(ret, "usbnet_get_endpoints failed: %d", ret);
+
+ dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv),
+ GFP_KERNEL);
+
+ pdata = (struct smsc75xx_priv *)(dev->data[0]);
+ if (!pdata) {
+ netdev_warn(dev->net, "Unable to allocate smsc75xx_priv");
+ return -ENOMEM;
+ }
+
+ pdata->dev = dev;
+
+ spin_lock_init(&pdata->rfe_ctl_lock);
+ mutex_init(&pdata->dataport_mutex);
+
+ INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
+
+ /* Init all registers */
+ ret = smsc75xx_reset(dev);
+
+ dev->net->netdev_ops = &smsc75xx_netdev_ops;
+ dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
+ dev->net->flags |= IFF_MULTICAST;
+ dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
+ return 0;
+}
+
+static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+ if (pdata) {
+ netif_dbg(dev, ifdown, dev->net, "free pdata");
+ kfree(pdata);
+ pdata = NULL;
+ dev->data[0] = 0;
+ }
+}
+
+static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ while (skb->len > 0) {
+ u32 rx_cmd_a, rx_cmd_b, align_count, size;
+ struct sk_buff *ax_skb;
+ unsigned char *packet;
+
+ memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a));
+ le32_to_cpus(&rx_cmd_a);
+ skb_pull(skb, 4);
+
+ memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
+ le32_to_cpus(&rx_cmd_b);
+ skb_pull(skb, 4 + NET_IP_ALIGN);
+
+ packet = skb->data;
+
+ /* get the packet length */
+ size = (rx_cmd_a & RX_CMD_A_LEN) - NET_IP_ALIGN;
+ align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
+
+ if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
+ netif_dbg(dev, rx_err, dev->net,
+ "Error rx_cmd_a=0x%08x", rx_cmd_a);
+ dev->net->stats.rx_errors++;
+ dev->net->stats.rx_dropped++;
+
+ if (rx_cmd_a & RX_CMD_A_FCS)
+ dev->net->stats.rx_crc_errors++;
+ else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
+ dev->net->stats.rx_frame_errors++;
+ } else {
+ /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
+ if (unlikely(size > (ETH_FRAME_LEN + 12))) {
+ netif_dbg(dev, rx_err, dev->net,
+ "size err rx_cmd_a=0x%08x", rx_cmd_a);
+ return 0;
+ }
+
+ /* last frame in this batch */
+ if (skb->len == size) {
+ skb->ip_summed = CHECKSUM_NONE;
+ skb_trim(skb, skb->len - 4); /* remove fcs */
+ skb->truesize = size + sizeof(struct sk_buff);
+
+ return 1;
+ }
+
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!ax_skb)) {
+ netdev_warn(dev->net, "Error allocating skb");
+ return 0;
+ }
+
+ ax_skb->len = size;
+ ax_skb->data = packet;
+ skb_set_tail_pointer(ax_skb, size);
+
+ ax_skb->ip_summed = CHECKSUM_NONE;
+ skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
+ ax_skb->truesize = size + sizeof(struct sk_buff);
+
+ usbnet_skb_return(dev, ax_skb);
+ }
+
+ skb_pull(skb, size);
+
+ /* padding bytes before the next frame starts */
+ if (skb->len)
+ skb_pull(skb, align_count);
+ }
+
+ if (unlikely(skb->len < 0)) {
+ netdev_warn(dev->net, "invalid rx length<0 %d", skb->len);
+ return 0;
+ }
+
+ return 1;
+}
+
+static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
+ struct sk_buff *skb, gfp_t flags)
+{
+ u32 tx_cmd_a, tx_cmd_b;
+
+ /* We do not advertise SG, so skbs should be already linearized */
+ BUG_ON(skb_shinfo(skb)->nr_frags);
+
+ if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) {
+ struct sk_buff *skb2 =
+ skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS;
+
+ tx_cmd_b = 0;
+
+ skb_push(skb, 4);
+ cpu_to_le32s(&tx_cmd_b);
+ memcpy(skb->data, &tx_cmd_b, 4);
+
+ skb_push(skb, 4);
+ cpu_to_le32s(&tx_cmd_a);
+ memcpy(skb->data, &tx_cmd_a, 4);
+
+ return skb;
+}
+
+static const struct driver_info smsc75xx_info = {
+ .description = "smsc75xx USB 2.0 Gigabit Ethernet",
+ .bind = smsc75xx_bind,
+ .unbind = smsc75xx_unbind,
+ .link_reset = smsc75xx_link_reset,
+ .reset = smsc75xx_reset,
+ .rx_fixup = smsc75xx_rx_fixup,
+ .tx_fixup = smsc75xx_tx_fixup,
+ .status = smsc75xx_status,
+ .flags = FLAG_ETHER | FLAG_SEND_ZLP,
+};
+
+static const struct usb_device_id products[] = {
+ {
+ /* SMSC7500 USB Gigabit Ethernet Device */
+ USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500),
+ .driver_info = (unsigned long) &smsc75xx_info,
+ },
+ {
+ /* SMSC7500 USB Gigabit Ethernet Device */
+ USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505),
+ .driver_info = (unsigned long) &smsc75xx_info,
+ },
+ { }, /* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver smsc75xx_driver = {
+ .name = SMSC_CHIPNAME,
+ .id_table = products,
+ .probe = usbnet_probe,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .disconnect = usbnet_disconnect,
+};
+
+static int __init smsc75xx_init(void)
+{
+ return usb_register(&smsc75xx_driver);
+}
+module_init(smsc75xx_init);
+
+static void __exit smsc75xx_exit(void)
+{
+ usb_deregister(&smsc75xx_driver);
+}
+module_exit(smsc75xx_exit);
+
+MODULE_AUTHOR("Nancy Lin");
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
+MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/smsc75xx.h b/drivers/net/usb/smsc75xx.h
new file mode 100644
index 0000000..16e98c7
--- /dev/null
+++ b/drivers/net/usb/smsc75xx.h
@@ -0,0 +1,421 @@
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2010 SMSC
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *****************************************************************************/
+
+#ifndef _SMSC75XX_H
+#define _SMSC75XX_H
+
+/* Tx command words */
+#define TX_CMD_A_LSO (0x08000000)
+#define TX_CMD_A_IPE (0x04000000)
+#define TX_CMD_A_TPE (0x02000000)
+#define TX_CMD_A_IVTG (0x01000000)
+#define TX_CMD_A_RVTG (0x00800000)
+#define TX_CMD_A_FCS (0x00400000)
+#define TX_CMD_A_LEN (0x000FFFFF)
+
+#define TX_CMD_B_MSS (0x3FFF0000)
+#define TX_CMD_B_MSS_SHIFT (16)
+#define TX_MSS_MIN ((u16)8)
+#define TX_CMD_B_VTAG (0x0000FFFF)
+
+/* Rx command words */
+#define RX_CMD_A_ICE (0x80000000)
+#define RX_CMD_A_TCE (0x40000000)
+#define RX_CMD_A_IPV (0x20000000)
+#define RX_CMD_A_PID (0x18000000)
+#define RX_CMD_A_PID_NIP (0x00000000)
+#define RX_CMD_A_PID_TCP (0x08000000)
+#define RX_CMD_A_PID_UDP (0x10000000)
+#define RX_CMD_A_PID_PP (0x18000000)
+#define RX_CMD_A_PFF (0x04000000)
+#define RX_CMD_A_BAM (0x02000000)
+#define RX_CMD_A_MAM (0x01000000)
+#define RX_CMD_A_FVTG (0x00800000)
+#define RX_CMD_A_RED (0x00400000)
+#define RX_CMD_A_RWT (0x00200000)
+#define RX_CMD_A_RUNT (0x00100000)
+#define RX_CMD_A_LONG (0x00080000)
+#define RX_CMD_A_RXE (0x00040000)
+#define RX_CMD_A_DRB (0x00020000)
+#define RX_CMD_A_FCS (0x00010000)
+#define RX_CMD_A_UAM (0x00008000)
+#define RX_CMD_A_LCSM (0x00004000)
+#define RX_CMD_A_LEN (0x00003FFF)
+
+#define RX_CMD_B_CSUM (0xFFFF0000)
+#define RX_CMD_B_CSUM_SHIFT (16)
+#define RX_CMD_B_VTAG (0x0000FFFF)
+
+/* SCSRs */
+#define ID_REV (0x0000)
+
+#define FPGA_REV (0x0004)
+
+#define BOND_CTL (0x0008)
+
+#define INT_STS (0x000C)
+#define INT_STS_RDFO_INT (0x00400000)
+#define INT_STS_TXE_INT (0x00200000)
+#define INT_STS_MACRTO_INT (0x00100000)
+#define INT_STS_TX_DIS_INT (0x00080000)
+#define INT_STS_RX_DIS_INT (0x00040000)
+#define INT_STS_PHY_INT_ (0x00020000)
+#define INT_STS_MAC_ERR_INT (0x00008000)
+#define INT_STS_TDFU (0x00004000)
+#define INT_STS_TDFO (0x00002000)
+#define INT_STS_GPIOS (0x00000FFF)
+#define INT_STS_CLEAR_ALL (0xFFFFFFFF)
+
+#define HW_CFG (0x0010)
+#define HW_CFG_SMDET_STS (0x00008000)
+#define HW_CFG_SMDET_EN (0x00004000)
+#define HW_CFG_EEM (0x00002000)
+#define HW_CFG_RST_PROTECT (0x00001000)
+#define HW_CFG_PORT_SWAP (0x00000800)
+#define HW_CFG_PHY_BOOST (0x00000600)
+#define HW_CFG_PHY_BOOST_NORMAL (0x00000000)
+#define HW_CFG_PHY_BOOST_4 (0x00002000)
+#define HW_CFG_PHY_BOOST_8 (0x00004000)
+#define HW_CFG_PHY_BOOST_12 (0x00006000)
+#define HW_CFG_LEDB (0x00000100)
+#define HW_CFG_BIR (0x00000080)
+#define HW_CFG_SBP (0x00000040)
+#define HW_CFG_IME (0x00000020)
+#define HW_CFG_MEF (0x00000010)
+#define HW_CFG_ETC (0x00000008)
+#define HW_CFG_BCE (0x00000004)
+#define HW_CFG_LRST (0x00000002)
+#define HW_CFG_SRST (0x00000001)
+
+#define PMT_CTL (0x0014)
+#define PMT_CTL_PHY_PWRUP (0x00000400)
+#define PMT_CTL_RES_CLR_WKP_EN (0x00000100)
+#define PMT_CTL_DEV_RDY (0x00000080)
+#define PMT_CTL_SUS_MODE (0x00000060)
+#define PMT_CTL_SUS_MODE_0 (0x00000000)
+#define PMT_CTL_SUS_MODE_1 (0x00000020)
+#define PMT_CTL_SUS_MODE_2 (0x00000040)
+#define PMT_CTL_SUS_MODE_3 (0x00000060)
+#define PMT_CTL_PHY_RST (0x00000010)
+#define PMT_CTL_WOL_EN (0x00000008)
+#define PMT_CTL_ED_EN (0x00000004)
+#define PMT_CTL_WUPS (0x00000003)
+#define PMT_CTL_WUPS_NO (0x00000000)
+#define PMT_CTL_WUPS_ED (0x00000001)
+#define PMT_CTL_WUPS_WOL (0x00000002)
+#define PMT_CTL_WUPS_MULTI (0x00000003)
+
+#define LED_GPIO_CFG (0x0018)
+#define LED_GPIO_CFG_LED2_FUN_SEL (0x80000000)
+#define LED_GPIO_CFG_LED10_FUN_SEL (0x40000000)
+#define LED_GPIO_CFG_LEDGPIO_EN (0x0000F000)
+#define LED_GPIO_CFG_LEDGPIO_EN_0 (0x00001000)
+#define LED_GPIO_CFG_LEDGPIO_EN_1 (0x00002000)
+#define LED_GPIO_CFG_LEDGPIO_EN_2 (0x00004000)
+#define LED_GPIO_CFG_LEDGPIO_EN_3 (0x00008000)
+#define LED_GPIO_CFG_GPBUF (0x00000F00)
+#define LED_GPIO_CFG_GPBUF_0 (0x00000100)
+#define LED_GPIO_CFG_GPBUF_1 (0x00000200)
+#define LED_GPIO_CFG_GPBUF_2 (0x00000400)
+#define LED_GPIO_CFG_GPBUF_3 (0x00000800)
+#define LED_GPIO_CFG_GPDIR (0x000000F0)
+#define LED_GPIO_CFG_GPDIR_0 (0x00000010)
+#define LED_GPIO_CFG_GPDIR_1 (0x00000020)
+#define LED_GPIO_CFG_GPDIR_2 (0x00000040)
+#define LED_GPIO_CFG_GPDIR_3 (0x00000080)
+#define LED_GPIO_CFG_GPDATA (0x0000000F)
+#define LED_GPIO_CFG_GPDATA_0 (0x00000001)
+#define LED_GPIO_CFG_GPDATA_1 (0x00000002)
+#define LED_GPIO_CFG_GPDATA_2 (0x00000004)
+#define LED_GPIO_CFG_GPDATA_3 (0x00000008)
+
+#define GPIO_CFG (0x001C)
+#define GPIO_CFG_SHIFT (24)
+#define GPIO_CFG_GPEN (0xFF000000)
+#define GPIO_CFG_GPBUF (0x00FF0000)
+#define GPIO_CFG_GPDIR (0x0000FF00)
+#define GPIO_CFG_GPDATA (0x000000FF)
+
+#define GPIO_WAKE (0x0020)
+#define GPIO_WAKE_PHY_LINKUP_EN (0x80000000)
+#define GPIO_WAKE_POL (0x0FFF0000)
+#define GPIO_WAKE_POL_SHIFT (16)
+#define GPIO_WAKE_WK (0x00000FFF)
+
+#define DP_SEL (0x0024)
+#define DP_SEL_DPRDY (0x80000000)
+#define DP_SEL_RSEL (0x0000000F)
+#define DP_SEL_URX (0x00000000)
+#define DP_SEL_VHF (0x00000001)
+#define DP_SEL_VHF_HASH_LEN (16)
+#define DP_SEL_VHF_VLAN_LEN (128)
+#define DP_SEL_LSO_HEAD (0x00000002)
+#define DP_SEL_FCT_RX (0x00000003)
+#define DP_SEL_FCT_TX (0x00000004)
+#define DP_SEL_DESCRIPTOR (0x00000005)
+#define DP_SEL_WOL (0x00000006)
+
+#define DP_CMD (0x0028)
+#define DP_CMD_WRITE (0x01)
+#define DP_CMD_READ (0x00)
+
+#define DP_ADDR (0x002C)
+
+#define DP_DATA (0x0030)
+
+#define BURST_CAP (0x0034)
+#define BURST_CAP_MASK (0x0000000F)
+
+#define INT_EP_CTL (0x0038)
+#define INT_EP_CTL_INTEP_ON (0x80000000)
+#define INT_EP_CTL_RDFO_EN (0x00400000)
+#define INT_EP_CTL_TXE_EN (0x00200000)
+#define INT_EP_CTL_MACROTO_EN (0x00100000)
+#define INT_EP_CTL_TX_DIS_EN (0x00080000)
+#define INT_EP_CTL_RX_DIS_EN (0x00040000)
+#define INT_EP_CTL_PHY_EN_ (0x00020000)
+#define INT_EP_CTL_MAC_ERR_EN (0x00008000)
+#define INT_EP_CTL_TDFU_EN (0x00004000)
+#define INT_EP_CTL_TDFO_EN (0x00002000)
+#define INT_EP_CTL_RX_FIFO_EN (0x00001000)
+#define INT_EP_CTL_GPIOX_EN (0x00000FFF)
+
+#define BULK_IN_DLY (0x003C)
+#define BULK_IN_DLY_MASK (0xFFFF)
+
+#define E2P_CMD (0x0040)
+#define E2P_CMD_BUSY (0x80000000)
+#define E2P_CMD_MASK (0x70000000)
+#define E2P_CMD_READ (0x00000000)
+#define E2P_CMD_EWDS (0x10000000)
+#define E2P_CMD_EWEN (0x20000000)
+#define E2P_CMD_WRITE (0x30000000)
+#define E2P_CMD_WRAL (0x40000000)
+#define E2P_CMD_ERASE (0x50000000)
+#define E2P_CMD_ERAL (0x60000000)
+#define E2P_CMD_RELOAD (0x70000000)
+#define E2P_CMD_TIMEOUT (0x00000400)
+#define E2P_CMD_LOADED (0x00000200)
+#define E2P_CMD_ADDR (0x000001FF)
+
+#define MAX_EEPROM_SIZE (512)
+
+#define E2P_DATA (0x0044)
+#define E2P_DATA_MASK_ (0x000000FF)
+
+#define RFE_CTL (0x0060)
+#define RFE_CTL_TCPUDP_CKM (0x00001000)
+#define RFE_CTL_IP_CKM (0x00000800)
+#define RFE_CTL_AB (0x00000400)
+#define RFE_CTL_AM (0x00000200)
+#define RFE_CTL_AU (0x00000100)
+#define RFE_CTL_VS (0x00000080)
+#define RFE_CTL_UF (0x00000040)
+#define RFE_CTL_VF (0x00000020)
+#define RFE_CTL_SPF (0x00000010)
+#define RFE_CTL_MHF (0x00000008)
+#define RFE_CTL_DHF (0x00000004)
+#define RFE_CTL_DPF (0x00000002)
+#define RFE_CTL_RST_RF (0x00000001)
+
+#define VLAN_TYPE (0x0064)
+#define VLAN_TYPE_MASK (0x0000FFFF)
+
+#define FCT_RX_CTL (0x0090)
+#define FCT_RX_CTL_EN (0x80000000)
+#define FCT_RX_CTL_RST (0x40000000)
+#define FCT_RX_CTL_SBF (0x02000000)
+#define FCT_RX_CTL_OVERFLOW (0x01000000)
+#define FCT_RX_CTL_FRM_DROP (0x00800000)
+#define FCT_RX_CTL_RX_NOT_EMPTY (0x00400000)
+#define FCT_RX_CTL_RX_EMPTY (0x00200000)
+#define FCT_RX_CTL_RX_DISABLED (0x00100000)
+#define FCT_RX_CTL_RXUSED (0x0000FFFF)
+
+#define FCT_TX_CTL (0x0094)
+#define FCT_TX_CTL_EN (0x80000000)
+#define FCT_TX_CTL_RST (0x40000000)
+#define FCT_TX_CTL_TX_NOT_EMPTY (0x00400000)
+#define FCT_TX_CTL_TX_EMPTY (0x00200000)
+#define FCT_TX_CTL_TX_DISABLED (0x00100000)
+#define FCT_TX_CTL_TXUSED (0x0000FFFF)
+
+#define FCT_RX_FIFO_END (0x0098)
+#define FCT_RX_FIFO_END_MASK (0x0000007F)
+
+#define FCT_TX_FIFO_END (0x009C)
+#define FCT_TX_FIFO_END_MASK (0x0000003F)
+
+#define FCT_FLOW (0x00A0)
+#define FCT_FLOW_THRESHOLD_OFF (0x00007F00)
+#define FCT_FLOW_THRESHOLD_OFF_SHIFT (8)
+#define FCT_FLOW_THRESHOLD_ON (0x0000007F)
+
+/* MAC CSRs */
+#define MAC_CR (0x100)
+#define MAC_CR_ADP (0x00002000)
+#define MAC_CR_ADD (0x00001000)
+#define MAC_CR_ASD (0x00000800)
+#define MAC_CR_INT_LOOP (0x00000400)
+#define MAC_CR_BOLMT (0x000000C0)
+#define MAC_CR_FDPX (0x00000008)
+#define MAC_CR_CFG (0x00000006)
+#define MAC_CR_CFG_10 (0x00000000)
+#define MAC_CR_CFG_100 (0x00000002)
+#define MAC_CR_CFG_1000 (0x00000004)
+#define MAC_CR_RST (0x00000001)
+
+#define MAC_RX (0x104)
+#define MAC_RX_MAX_SIZE (0x3FFF0000)
+#define MAC_RX_MAX_SIZE_SHIFT (16)
+#define MAC_RX_FCS_STRIP (0x00000010)
+#define MAC_RX_FSE (0x00000004)
+#define MAC_RX_RXD (0x00000002)
+#define MAC_RX_RXEN (0x00000001)
+
+#define MAC_TX (0x108)
+#define MAC_TX_BFCS (0x00000004)
+#define MAC_TX_TXD (0x00000002)
+#define MAC_TX_TXEN (0x00000001)
+
+#define FLOW (0x10C)
+#define FLOW_FORCE_FC (0x80000000)
+#define FLOW_TX_FCEN (0x40000000)
+#define FLOW_RX_FCEN (0x20000000)
+#define FLOW_FPF (0x10000000)
+#define FLOW_PAUSE_TIME (0x0000FFFF)
+
+#define RAND_SEED (0x110)
+#define RAND_SEED_MASK (0x0000FFFF)
+
+#define ERR_STS (0x114)
+#define ERR_STS_FCS_ERR (0x00000100)
+#define ERR_STS_LFRM_ERR (0x00000080)
+#define ERR_STS_RUNT_ERR (0x00000040)
+#define ERR_STS_COLLISION_ERR (0x00000010)
+#define ERR_STS_ALIGN_ERR (0x00000008)
+#define ERR_STS_URUN_ERR (0x00000004)
+
+#define RX_ADDRH (0x118)
+#define RX_ADDRH_MASK (0x0000FFFF)
+
+#define RX_ADDRL (0x11C)
+
+#define MII_ACCESS (0x120)
+#define MII_ACCESS_PHY_ADDR (0x0000F800)
+#define MII_ACCESS_PHY_ADDR_SHIFT (11)
+#define MII_ACCESS_REG_ADDR (0x000007C0)
+#define MII_ACCESS_REG_ADDR_SHIFT (6)
+#define MII_ACCESS_READ (0x00000000)
+#define MII_ACCESS_WRITE (0x00000002)
+#define MII_ACCESS_BUSY (0x00000001)
+
+#define MII_DATA (0x124)
+#define MII_DATA_MASK (0x0000FFFF)
+
+#define WUCSR (0x140)
+#define WUCSR_PFDA_FR (0x00000080)
+#define WUCSR_WUFR (0x00000040)
+#define WUCSR_MPR (0x00000020)
+#define WUCSR_BCAST_FR (0x00000010)
+#define WUCSR_PFDA_EN (0x00000008)
+#define WUCSR_WUEN (0x00000004)
+#define WUCSR_MPEN (0x00000002)
+#define WUCSR_BCST_EN (0x00000001)
+
+#define WUF_CFGX (0x144)
+#define WUF_CFGX_EN (0x80000000)
+#define WUF_CFGX_ATYPE (0x03000000)
+#define WUF_CFGX_ATYPE_UNICAST (0x00000000)
+#define WUF_CFGX_ATYPE_MULTICAST (0x02000000)
+#define WUF_CFGX_ATYPE_ALL (0x03000000)
+#define WUF_CFGX_PATTERN_OFFSET (0x007F0000)
+#define WUF_CFGX_PATTERN_OFFSET_SHIFT (16)
+#define WUF_CFGX_CRC16 (0x0000FFFF)
+#define WUF_NUM (8)
+
+#define WUF_MASKX (0x170)
+#define WUF_MASKX_AVALID (0x80000000)
+#define WUF_MASKX_ATYPE (0x40000000)
+
+#define ADDR_FILTX (0x300)
+#define ADDR_FILTX_FB_VALID (0x80000000)
+#define ADDR_FILTX_FB_TYPE (0x40000000)
+#define ADDR_FILTX_FB_ADDRHI (0x0000FFFF)
+#define ADDR_FILTX_SB_ADDRLO (0xFFFFFFFF)
+
+#define WUCSR2 (0x500)
+#define WUCSR2_NS_RCD (0x00000040)
+#define WUCSR2_ARP_RCD (0x00000020)
+#define WUCSR2_TCPSYN_RCD (0x00000010)
+#define WUCSR2_NS_OFFLOAD (0x00000004)
+#define WUCSR2_ARP_OFFLOAD (0x00000002)
+#define WUCSR2_TCPSYN_OFFLOAD (0x00000001)
+
+#define WOL_FIFO_STS (0x504)
+
+#define IPV6_ADDRX (0x510)
+
+#define IPV4_ADDRX (0x590)
+
+
+/* Vendor-specific PHY Definitions */
+
+/* Mode Control/Status Register */
+#define PHY_MODE_CTRL_STS (17)
+#define MODE_CTRL_STS_EDPWRDOWN ((u16)0x2000)
+#define MODE_CTRL_STS_ENERGYON ((u16)0x0002)
+
+#define PHY_INT_SRC (29)
+#define PHY_INT_SRC_ENERGY_ON ((u16)0x0080)
+#define PHY_INT_SRC_ANEG_COMP ((u16)0x0040)
+#define PHY_INT_SRC_REMOTE_FAULT ((u16)0x0020)
+#define PHY_INT_SRC_LINK_DOWN ((u16)0x0010)
+
+#define PHY_INT_MASK (30)
+#define PHY_INT_MASK_ENERGY_ON ((u16)0x0080)
+#define PHY_INT_MASK_ANEG_COMP ((u16)0x0040)
+#define PHY_INT_MASK_REMOTE_FAULT ((u16)0x0020)
+#define PHY_INT_MASK_LINK_DOWN ((u16)0x0010)
+#define PHY_INT_MASK_DEFAULT (PHY_INT_MASK_ANEG_COMP | \
+ PHY_INT_MASK_LINK_DOWN)
+
+#define PHY_SPECIAL (31)
+#define PHY_SPECIAL_SPD ((u16)0x001C)
+#define PHY_SPECIAL_SPD_10HALF ((u16)0x0004)
+#define PHY_SPECIAL_SPD_10FULL ((u16)0x0014)
+#define PHY_SPECIAL_SPD_100HALF ((u16)0x0008)
+#define PHY_SPECIAL_SPD_100FULL ((u16)0x0018)
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1
+#define USB_VENDOR_REQUEST_GET_STATS 0xA2
+
+/* Interrupt Endpoint status word bitfields */
+#define INT_ENP_RDFO_INT ((u32)BIT(22))
+#define INT_ENP_TXE_INT ((u32)BIT(21))
+#define INT_ENP_TX_DIS_INT ((u32)BIT(19))
+#define INT_ENP_RX_DIS_INT ((u32)BIT(18))
+#define INT_ENP_PHY_INT ((u32)BIT(17))
+#define INT_ENP_MAC_ERR_INT ((u32)BIT(15))
+#define INT_ENP_RX_FIFO_DATA_INT ((u32)BIT(12))
+
+#endif /* _SMSC75XX_H */
--
1.6.6.1
^ permalink raw reply related
* [PATCH 0/4] SMSC LAN75xx USB gigabit ethernet adapter driver
From: Steve Glendinning @ 2010-03-10 18:26 UTC (permalink / raw)
To: netdev
This patchset adds a driver for SMSC's new LAN7500 USB 2.0 to Gigabit
Ethernet controller.
Steve Glendinning (4):
smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver
smsc75xx: add RX checksum offload
smsc75xx: add TX checksum offload
smsc75xx: add TX segmentation offload support
drivers/net/usb/Kconfig | 8 +
drivers/net/usb/Makefile | 1 +
drivers/net/usb/smsc75xx.c | 1288 ++++++++++++++++++++++++++++++++++++++++++++
drivers/net/usb/smsc75xx.h | 421 +++++++++++++++
4 files changed, 1718 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/usb/smsc75xx.c
create mode 100644 drivers/net/usb/smsc75xx.h
^ permalink raw reply
* Re: [PATCH 6/13] bridge: Add core IGMP snooping support
From: Arnd Bergmann @ 2010-03-10 17:56 UTC (permalink / raw)
To: David Miller; +Cc: paulmck, herbert, eric.dumazet, netdev, shemminger
In-Reply-To: <20100310.083547.213194954.davem@davemloft.net>
On Wednesday 10 March 2010, David Miller wrote:
> From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
> Date: Wed, 10 Mar 2010 08:26:58 -0800
>
> > I have -tip commit a898def29e4119bc01ebe7ca97423181f4c0ea2d that
> > converts some of the rcu_dereference()s in net/core/filter.c,
> > net/core/dev.c, net/decnet/dn_route.c, net/packet/af_packet.c, and
> > net/ipv4/route.c to rcu_dereference_bh().
> >
> > How should we coordinate the removal of the rcu_read_lock() calls?
>
> Paul if you want to do this via your tree, feel free.
My feeling is that this should be combined with the annotations I'm doing,
annotating one subsystem at a time, and doing changes like these in the
process. I'm still unsure what interface extensions there will have to
be, but I guess we can the new interfaces as empty wrappers in the 2.6.34
phase, and do all of the conversions where there are potential or real
bugs.
All the other annotations can get queued in subsystem maintainer trees
where it makes sense or get put in one tree for all the others, to be
merged in after 2.6.34 is out.
Arnd
^ permalink raw reply
* Re: [RFC PATCH] bnx2x: fix tx queue locking and memory barriers
From: David Miller @ 2010-03-10 17:49 UTC (permalink / raw)
To: dhowells; +Cc: sgruszka, vladz, paulmck, netdev, eilong
In-Reply-To: <31355.1268240990@redhat.com>
From: David Howells <dhowells@redhat.com>
Date: Wed, 10 Mar 2010 17:09:50 +0000
> The barrier() didn't tell the compiler that fp->tx_bd_prod and fp->tx_bd_cons
> could change. What it did was to say that the accesses to those two variables
> must be performed after all the other accesses issued by that CPU prior to the
> barrier - at least as far as the compiler is concerned.
barrier() has a "memory" asm clobber which says that all memory could
have changed.
^ permalink raw reply
* [PATCH] drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages
From: Joe Perches @ 2010-03-10 17:34 UTC (permalink / raw)
To: David Miller; +Cc: mikpe, netdev, grundler, kyle, linux-kernel
In-Reply-To: <20100310.084104.201710892.davem@davemloft.net>
On Wed, 2010-03-10 at 08:41 -0800, David Miller wrote:
> From: Mikael Pettersson <mikpe@it.uu.se>
> Date: Wed, 10 Mar 2010 16:33:28 +0100
> > Booting 2.6.34-rc1 on a machine with a tulip nic I see
> > a number of kernel messages that include "(null)" where
> > previous kernels included the string "tulip0":
> CC:'ing the guilty party :-) It's one of the following
> commits:
Thanks Mikael.
Anonymity has some good attributes.
Blame avoidance is one of them.
I've broad shoulders. It's me, then Dwight Howard...
There might be another few of these where ->name or ->dev
was used before struct device or net_device was registered.
I'll go back and check.
tulip_core has:
if (tp->flags & HAS_MEDIA_TABLE) {
sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */
tulip_parse_eeprom(dev);
strcpy(dev->name, "eth%d"); /* un-hack */
}
So I don't feel _too_ bad.
tulip_parse_eeprom is done before register_netdev so the logging
there can not use netdev_<level> or dev_<level>(&dev->dev
Signed-off-by: Joe Perches <joe@perches.com>
drivers/net/tulip/eeprom.c | 54 ++++++++++++++++++++++++-------------------
1 files changed, 30 insertions(+), 24 deletions(-)
---
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 93f4e83..49f05d1 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -143,6 +143,12 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
void __devinit tulip_parse_eeprom(struct net_device *dev)
{
+ /*
+ dev is not registered at this point, so logging messages can't
+ use dev_<level> or netdev_<level> but dev->name is good via a
+ hack in the caller
+ */
+
/* The last media info list parsed, for multiport boards. */
static struct mediatable *last_mediatable;
static unsigned char *last_ee_data;
@@ -161,15 +167,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
if (ee_data[0] == 0xff) {
if (last_mediatable) {
controller_index++;
- dev_info(&dev->dev,
- "Controller %d of multiport board\n",
- controller_index);
+ pr_info("%s: Controller %d of multiport board\n",
+ dev->name, controller_index);
tp->mtable = last_mediatable;
ee_data = last_ee_data;
goto subsequent_board;
} else
- dev_info(&dev->dev,
- "Missing EEPROM, this interface may not work correctly!\n");
+ pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
+ dev->name);
return;
}
/* Do a fix-up based on the vendor half of the station address prefix. */
@@ -181,15 +186,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
i++; /* An Accton EN1207, not an outlaw Maxtech. */
memcpy(ee_data + 26, eeprom_fixups[i].newtable,
sizeof(eeprom_fixups[i].newtable));
- dev_info(&dev->dev,
- "Old format EEPROM on '%s' board. Using substitute media control info\n",
- eeprom_fixups[i].name);
+ pr_info("%s: Old format EEPROM on '%s' board. Using substitute media control info\n",
+ dev->name, eeprom_fixups[i].name);
break;
}
}
if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
- dev_info(&dev->dev,
- "Old style EEPROM with no media selection information\n");
+ pr_info("%s: Old style EEPROM with no media selection information\n",
+ dev->name);
return;
}
}
@@ -217,8 +221,8 @@ subsequent_board:
/* there is no phy information, don't even try to build mtable */
if (count == 0) {
if (tulip_debug > 0)
- dev_warn(&dev->dev,
- "no phy info, aborting mtable build\n");
+ pr_warning("%s: no phy info, aborting mtable build\n",
+ dev->name);
return;
}
@@ -234,8 +238,10 @@ subsequent_board:
mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
mtable->csr15dir = mtable->csr15val = 0;
- dev_info(&dev->dev, "EEPROM default media type %s\n",
- media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
+ pr_info("%s: EEPROM default media type %s\n",
+ dev->name,
+ media & 0x0800 ? "Autosense"
+ : medianame[media & MEDIA_MASK]);
for (i = 0; i < count; i++) {
struct medialeaf *leaf = &mtable->mleaf[i];
@@ -298,17 +304,17 @@ subsequent_board:
}
if (tulip_debug > 1 && leaf->media == 11) {
unsigned char *bp = leaf->leafdata;
- dev_info(&dev->dev,
- "MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
- bp[0], bp[1], bp[2 + bp[1]*2],
- bp[5 + bp[2 + bp[1]*2]*2],
- bp[4 + bp[2 + bp[1]*2]*2]);
+ pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
+ dev->name,
+ bp[0], bp[1], bp[2 + bp[1]*2],
+ bp[5 + bp[2 + bp[1]*2]*2],
+ bp[4 + bp[2 + bp[1]*2]*2]);
}
- dev_info(&dev->dev,
- "Index #%d - Media %s (#%d) described by a %s (%d) block\n",
- i, medianame[leaf->media & 15], leaf->media,
- leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
- leaf->type);
+ pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
+ dev->name,
+ i, medianame[leaf->media & 15], leaf->media,
+ leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
+ leaf->type);
}
if (new_advertise)
tp->sym_advertise = new_advertise;
^ permalink raw reply related
* Re: [RFC PATCH] bnx2x: fix tx queue locking and memory barriers
From: David Howells @ 2010-03-10 17:19 UTC (permalink / raw)
To: Stanislaw Gruszka, Vladislav Zolotarov, David Miller
Cc: dhowells, paulmck, netdev, Eilon Greenstein
In-Reply-To: <31355.1268240990@redhat.com>
David Howells <dhowells@redhat.com> wrote:
> > - barrier(); /* Tell compiler that prod and cons can change */
> > + /* prod and cons can change on other cpu, want to see
> > + consistend available space and queue (stop/running) state */
> > + smp_mb();
> > +
> > prod = fp->tx_bd_prod;
> > cons = fp->tx_bd_cons;
>
> I suspect that this isn't what you want.
>
> The barrier() didn't tell the compiler that fp->tx_bd_prod and fp->tx_bd_cons
> could change. What it did was to say that the accesses to those two variables
> must be performed after all the other accesses issued by that CPU prior to the
> barrier - at least as far as the compiler is concerned.
>
> You don't need to separate the reads of tx_bd_prod and tx_bd_cons above with a
> memory barrier. They aren't ever altered in the same place.
Having said that, you might need a memory barrier before reading tx_bd_prod in
the consumer if the producer waggles a flag in memory to indicate to the
consumer that it should consume, and a memory barrier in the producer before
waggling that flag:
[producer]
...
smp_wmb(); /* commit buffer contents before incrementing index */
fp->tx_bd_prod = TX_BD(bd_prod + 1);
smp_wmb(); /* commit increment index before prodding consumer */
prod_consumer();
[consumer]
check_prod_flag();
smp_rmb(); /* read producer index after checking prod flag */
bd_prod = fp->tx_bd_prod;
bd_cons = fp->tx_bd_cons;
smp_read_barrier_depends(); /* read index before reading contents */
David
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox